Highly regioselective Heck reactions of heteroaryl halides with electron-rich olefins in ionic liquid

Palladium-catalyzed Heck reactions of the heteroaryl halides, halopyridines, bromoquinoline and bromothiophenes, with the electron-rich olefins vinyl ethers and allyl alcohol were shown to give essentially only the branched olefins in an imidazolium ionic liquid, whereas in molecular solvents a mixture of regioisomers was formed. The method obviates the need for aryl triflates and stoichiometric inorganic salt additives, providing an easy entry to functionalized heteroaromatics incorporating acetyl and 2-allyl alcohol functionalities.     

Unsymmetrical diaryl sulfones and aryl vinyl sulfones through palladium-catalyzed coupling of aryl and vinyl halides or triflates with sulfinic acid salts

The palladium-catalyzed reaction of sulfinic acid salts with a wide variety of aryl and vinyl halides or triflates provides unsymmetrical diaryl sulfones and aryl vinyl sulfones in good to excellent yields. The reaction is strongly influenced by the presence of nBu4NCl, and the use of Xantphos, a rigid bidentate ligand with a wide natural bite angle, was found to be crucial for the success of the reaction. With neutral, electron-rich, and electron-poor aryl iodides best results were obtained by using Pd2(dba)3, Xantphos, Cs2CO3, and nBu4NCl, in toluene at 80 degrees C. Two general procedures were employed with aryl bromides and triflates: sodium p-toluenesulfinate, Pd2(dba)3, Xantphos, Cs2CO3, 120 degrees C, in toluene with nBu4NCl (procedure A: neutral, electron-rich, and slightly electron-poor aryl bromides or triflates) and without nBu4NCl (procedure B: electron-poor aryl bromides or triflates). With vinyl triflates best results were obtained at 60 degrees C omitting nBu4NCl.     

Suzuki-Miyaura cross-coupling reactions of potassium alkenyltrifluoroborates

We have previously reported that the palladium-catalyzed cross-coupling reaction of air-stable potassium alkenyltrifluoroborates with aryl halides and triflates proceeds readily with good yields. Recent progress in outlining the scope and limitations of such reactions is described herein. The palladium-catalyzed cross-coupling reaction of potassium alkenyltrifluoroborates with aryl and heteroaryl halides and triflates proceeds readily with moderate to excellent yields. The alkenyl cross-coupling reaction can generally be effected using 2 mol % of PdCl2(dppf).CH2Cl2 as catalyst in i-PrOH-H2O in the presence of t-BuNH2 as the base. A variety of functional groups are tolerated in both partners, and the process is stereospecific with regard to the alkenyltrifluoroborate starting material.     

Palladium-catalyzed borylation of aryl halides or triflates with dialkoxyborane: A novel and facile synthetic route to arylboronates

A direct borylation of aryl halides or triflates with dialkoxyborane was investigated. The coupling reaction of pinacolborane with aryl halides or triflates in the presence of a catalytic amount of PdCl(2)(dppf) together with a base provided arylboronates in high yields. The product distributions were strongly dependent on the base employed, and the tertiary amine, especially Et(3)N, was effective for the selective formation of the boron-carbon bond. The reaction conditions were so mild that arylboronates having a variety of functional groups such as carbonyl, cyano, and nitro groups were readily prepared.     

Scope of direct arylation of fluorinated aromatics with aryl sulfonates

The scope and limitations of direct arylation of fluorinated aromatics with aryl sulfonates was examined. Pd(OAc)(2), in the presence of MePhos and KOAc in THF, efficiently catalyzed the direct arylation of fluoro aromatics with aryl triflates under ambient conditions. Sterically hindered triflates and heteroaryl triflates gave good to excellent yields of the cross coupled products using a modified catalyst system which involves Pd(OAc)(2)-RuPhos at 100 °C. The direct arylation of electron deficient arenes with aryl mesylates is also established using Pd(OAc)(2)-SPhos as the catalyst in toluene-(t)BuOH at 120 °C.     

Oxidative cross-coupling of beta,beta-difluoroenol silyl ethers with nucleophiles: a dipole-inversion method to difluoroketones

Oxidative cross-coupling of alpha-aryl-beta,beta-difluoroenol silyl ethers with heteroaromatics in the presence of Cu(OTf)(2) in wet acetonitrile proceeds smoothly, affording heteroaryldifluoromethyl aryl ketones in 61-88% yields. Alcohols also react as nucleophiles under the same conditions to provide alkoxydifluoromethyl aryl ketones in 73-80% yields. [reaction: see text]     

Decarboxylative Aminomethylation of Aryl‐ and Vinylsulfonates through Combined Nickel‐ and Photoredox‐Catalyzed Cross‐Coupling

A mild approach for the decarboxylative aminomethylation of aryl sulfonates by the combination of photoredox and nickel catalysis through C?O bond cleavage is described for the first time. A wide range of aryl triflates as well as aryl mesylates, tosylates and alkenyl triflates afford the corresponding products in good to excellent yields.     

Zinc trimethylsilylamide as a mild ammonia equivalent and base for the amination of aryl halides and triflates

[reaction: see text] We report that Zn[N(SiMe(3))(2)](2) is a mild ammonia equivalent and base for the palladium-catalyzed amination of aryl halides and triflates. In contrast to LiN(SiMe(3))(2), the combination of Zn[N(SiMe(3))(2)](2) and LiCl coupled with aryl halides and triflates containing base-sensitive functionality in high yields. In addition, aryl bromides coupled with aryl and alkylamines with the combination of Zn[N(SiMe(3))(2)](2) and LiCl as base. These aminations occurred without racemization of the enolizable stereocenter of an optically active ester.     

Lithium aminoborohydrides 17. Palladium catalyzed borylation of aryl iodides, bromides, and triflates with diisopropylaminoborane prepared from lithium diisopropylaminoborohydride

The Alcaraz-Vaultier borylation of aryl halides and triflates is reported utilizing diisopropylaminoborane (BH₂N(ⁱPr)₂) prepared from the corresponding lithium aminoborohydride (LAB reagent). BH₂N(ⁱPr)₂, prepared by reacting lithium diisopropylaminoborohydride with trimethylsilyl chloride, provided the most consistent isolated yields from this reaction. Catalytic amounts of palladium dichloride produced the highest yields from aryl iodides, while catalytic tris(dibenzylideneacetone)dipalladium(chloroform) provided the best yields for aryl bromides and triflates. This route to boronic acids is mild enough to tolerate various functionalities and for the first time employs aryl triflates as substrates for the Alcaraz-Vaultier borylation. In addition, it was found that both boronic acid and ester compounds could be isolated from the reaction mixture utilizing simple work-up procedures. Treatment of the reaction intermediate with an acid/base work-up provided the corresponding boronic acid, while treating the same intermediate with a diol, such as neopentyl glycol, afforded the corresponding boronic ester.     

Palladium-catalyzed carbonylation of aryl triplates. Synthesis of arenecarboxylic acid derivatives from phenols

Various aryl triflates derived from phenols were converted into aryl esters or amides in good yields by a palladium-catalyzed reaction with carbon monoxide and alcohols or amines.     

Rapid formation of triarylphosphines by microwave-assisted transition metal-catalyzed C-p cross-coupling reactions

Rapid, direct transition metal-catalyzed C-P(III) cross-coupling reactions were performed by microwave dielectric heating, employing diphenylphosphine and aryl halides/triflates as substrates. Depending on the specific aryl halide/triflate precursor, the highest yields were obtained utilizing heterogeneous or homogeneous Pd or Ni catalysts in DMF or NMP in the presence of KOAc or DABCO as a base. [reaction: see text]     

Dissociative electron attachment to triflates

Gas phase studies of dissociative electron attachment to simple alkyl (CF(3)SO(3)CH(3)) and aryl (C(6)H(5)SO(3)CF(3) and CF(3)SO(3)C(6)H(4)CH(3)) triflates, model molecules of nonionic photoacid generators for modern lithographic applications, were performed. The fragmentation pathways under electron impact below 10 eV were identified by means of crossed electron-molecular beam mass spectrometry. Major dissociation channels involved C-O, S-O, or C-S bond scissions in the triflate moiety leading to the formation of triflate (OTf(-)), triflyl (Tf(-)), or sulfonate (RSO(3)(-)) anions, respectively. A resonance leading to C-O bond breakage and OTf(-) formation in alkyl triflates occurred at electron energies about 0.5 eV lower than the corresponding resonance in aryl triflates. A resonance leading to S-O bond breakage and Tf(-) formation in aryl triflates occurred surprisingly at the same electron energies as C-O bond breakage. In case of alkyl triflates S-O bond breakage required 1.4 eV higher electron energies to occur and proceeded with substantially lower yields than in aryl triflates. C-S bond scission occurred for all presently studied triflates at energies close to 3 eV.     

Coupling Reactions of Alkynylsilanes Mediated by a Cu(I) Salt: Novel Syntheses of Conjugate Diynes and Disubstituted Ethynes

Reaction of 1-trimethylsilylalkyne with copper(I) chloride in a polar solvent, DMF, at 60 degrees C under an aerobic conditions smoothly undergoes homo-coupling to give the corresponding symmetrical 1,3-butadiynes in 70-99% yields. In addition, (arylethynyl)trimethylsilanes are found to couple with aryl triflates and chlorides in the presence of Cu(I)/Pd(0) (10 mol %/5 or 10 mol %) cocatalyst system to give the corresponding diarylethynes in 49-99% yields. The cross-coupling reaction is applied to a one-pot synthesis of the corresponding unsymmetrical diarylethynes from (trimethylsilyl)ethyne via sequential Sonogashira-Hagihara and the present cross-coupling reactions using two different aryl triflates. The reactions of (arylethynyl)trimethylsilanes with aryl(chloro)ethynes in the presence of 10 mol % of CuCl also yield the corresponding unsymmetrical 1,3-butadiynes in 43-97% yields.     

Application of silicon-based cross-coupling technology to triflates

Aryl silatranes undergo fluoride-induced cross-coupling with aryl triflates to provide unsymmetrical biaryl derivatives in good to excellent yields. Silatranes also couple with aryl iodides and bromides, although the yields of adduct are lower than with the corresponding siloxane derivates. Aryl siloxanes (which had previously failed to couple with triflates) can be employed for triflate couplings using the Denmark modification, although the yields are lower than the corresponding silatrane reactions.     

Convenient and Efficient Palladium-Catalyzed Coupling Reaction Between Ferroceneboronic Acid and Organic Triflates

A simple and efficient palladium (Pd)–catalyzed Suzuki cross-coupling reaction between ferroceneboronic acid and organic triflates for the preparation of monosubstituted ferrocene derivatives has been developed. A systematic study of various solvents, bases, and catalysts revealed that the combination of Pd(PPh₃)₄ (0.025 equiv) and K₃PO₄ (2 equiv) in refluxing dioxane gave reproducible and excellent yields of the coupling products. The reaction could be applied to a wide variety of aryl and vinyl triflates in good to excellent yields, and the electronic and steric effects were observed for ortho-, meta-, and para-substituents of aryl triflates.     

Four‐Component Borocarbonylation of Vinylarenes Enabled by Cooperative Cu/Pd Catalysis: Access to β‐Boryl Ketones and β‐Boryl Vinyl Esters

We report here a general four‐component synthetic procedure for the preparation of β‐boryl ketones and β‐boryl vinyl esters. Joint catalyzed by palladium and copper catalysts, borocarbonylative reaction between vinylarenes, aryl halides/triflates, B₂Pin₂, and carbon monoxide proceed successfully. A variety of synthetically useful β‐boryl ketones were synthesized in good to high yields by using aryl iodides as the substrates. It is noteworthy that when aryl triflates were applied as the starting materials, β‐boryl vinyl esters were synthesized in a similar manner and with broad functional group tolerance. A rational mechanism for this reaction was also proposed.     

Cross-coupling reactions of (1-fluorovinyl)methydiphenylsilane(1) with aryl halides and aryl triflates

The cesium fluoride (CsF)-assisted cross-coupling reaction of (1-fluorovinyl)methyldiphenylsilane (1) with aryl halides and aryl triflates was examined. The reaction with aryl iodides smoothly proceeded to afford the corresponding (1-fluorovinyl)arenes in the presence of a catalytic amount of CuI and Pd(PPh(3))(4) in aprotic polar solvents such as DMF, DMI, DMA, and NMP in good yields. A variety of functional groups (nitro, ester, ketone, and ether) on the aromatic rings can be tolerated under these mild conditions. Aryl iodides are superior to aryl bromides as the coupling reaction partner. The cross-coupling reaction of 1 with aryl triflates instead of aryl halides was also accomplished in the presence of tetrabutylammonium iodide (n-Bu(4)NI) as the additive under similar conditions.     

Four-Component Borocarbonylation of Vinylarenes Enabled by Cooperative Cu/Pd Catalysis: Access to β-Boryl Ketones and β-Boryl Vinyl Esters

We report here a general four-component synthetic procedure for the preparation of β-boryl ketones and β-boryl vinyl esters. Joint catalyzed by palladium and copper catalysts, borocarbonylative reaction between vinylarenes, aryl halides/triflates, B₂Pin₂, and carbon monoxide proceed successfully. A variety of synthetically useful β-boryl ketones were synthesized in good to high yields by using aryl iodides as the substrates. It is noteworthy that when aryl triflates were applied as the starting materials, β-boryl vinyl esters were synthesized in a similar manner and with broad functional group tolerance. A rational mechanism for this reaction was also proposed.     

Microwave-assisted amination from aryl triflates without base and catalyst

[reaction: see text] Aryl triflates are effectively converted to the corresponding anilines under microwave irradiation in 1-methyl-2-pyridone (NMP) without base and catalyst. Aryl triflates substituted with both electron-poor and electron-rich groups give good to excellent yields. It is noteworthy that the halogenated aryl triflates can chemoselectively react with amines to afford halogenated anilines.     

Enantioselective alpha-arylation of ketones with aryl triflates catalyzed by difluorphos complexes of palladium and nickel

The asymmetric alpha-arylation of ketones with aryl triflates is described, and the use of this electrophile with nickel and palladium catalysts containing a segphos derivative increases substantially the scope of highly enantioselective arylations of ketone enolates. The combination of aryl triflates as reactant, difluorphos as ligand, palladium catalysts for reactions of electron-neutral or electron-rich aryl triflates, and nickel catalysts for reactions of electron-poor aryl triflates led to a series of alpha-arylations of tetralone, indanone, cyclopentanone, and cyclohexanone derivatives. Enantioselectivities ranged from 70% to 98% with 10 examples over 90%. Systematic studies on these alpha-arylations have revealed a number of factors that affect enantioselectivity. Ligands containing biaryl backbones with smaller dihedral angles generate catalysts that react with higher enantioselectivity than related ligands with larger dihedral angles. In addition, faster rates for reactions of aryl triflates versus those for reactions of aryl bromides allow the alpha-arylations of aryl triflates to be conducted at lower temperatures, and this lower temperature improves enantioselectivity. Finally, studies that compare the enantioselectivities of catalytic reactions to those of stoichiometric reactions of isolated [(segphos)Pd(Ar)(Br)], [(segphos)Pd(Ar)(I)], and [(segphos)Ni(C6H4-4-CN)Br] suggest that catalyst decomposition affects enantioselectivity.