Synthesis and spectral investigations of a new dyad with spiropyran and fluorescein units: toward information processing at the single molecular level

A new dyad 1 with two spiropyran units as the photochromic acceptors and one fluorescein unit as the fluorescent donor was synthesized and characterized. External inputs (ultraviolet light, visible light, and proton) induce the reversible changes of the structure and, concomitantly, the absorption spectrum of dyad 1 due to the presence of two spiropyran units. Only the absorption spectrum of the ME form of the spiropyran units in dyad 1 has large spectral overlap with the fluorescence spectrum of the fluorescein unit. Thus, the fluorescence intensity of dyad 1 is modulated by reversible conversion among the three states of the photochromic spiropyran units and the fluorescence resonance energy transfer (FRET) between the ME form and the fluorescein unit. Based on the fact that dyad 1 could "read out" three external input signals (ultraviolet light, visible ligh,t and proton) and "write" a compatible specific output signal (fluorescence intensity), dyad 1 described here can be considered to perform an integrated circuit function with one OR and one AND interconnected logic gates. The present results demonstrate an efficient strategy for elaborating and transmitting information at the single molecular level.     

Light-induced aggregation of colloidal gold nanoparticles capped by thymine derivatives

The colloid stability of thymine-coated gold nanoparticles under light irradiation as a function of particle size, surface charge, and exposure time was investigated in alkaline, aqueous solutions as well as in a 0.5 vol % of DMF in H(2)O mixture. With increasing exposure to light irradiation at 280 nm, more and more particles coagulated. Light-induced aggregation of colloidal gold nanoparticles was attributed to reorientation of thymine terminal groups tethered on gold particle surfaces. A smaller particle size and negatively charged surface reduced the rate of photodimerization or even inhibited the photoreaction. UV-vis and FTIR spectroscopy confirmed the photodimerization of terminal thymine molecules under 280 nm light irradiation. The reaction kinetics of thymine photodimerization appears to be a combination of first-order reactions, each having different rates, reflecting the inhomogeneity and high curvature of the gold nanoparticle surfaces.     

Synthesis and thermal modulation of the fluorescence of a pyrene-arylmaleimide dyad and its Diels-Alder adduct

The fluorescence of a pyrene-arylmaleimide dyad and its Diels-Alder adduct can be thermally modulated through reversible Diels-Alder reaction of arylmaleimide unit with furan. Moreover, the fluorescence intensities of the Diels-Alder adduct of dyad 1 with furan vary linearly with the temperatures of the corresponding solutions, demonstrating that these molecules are interesting compounds for studies of fluorescent molecular thermometers.     

Light‐Induced Reversible Self‐Assembly of Gold Nanoparticles Surface‐Immobilized with Coumarin Ligands

A novel light‐induced reversible self‐assembly (LIRSA) system is based on the reversible photodimerization and photocleavage of coumarin groups on the surface of gold nanoparticles (AuNPs) in THF solution. Facilitated by coumarin groups, light irradiation at 365 nm triggers the stable assembly of monodisperse AuNPs; the resulting self‐assembly system can be disassembled back to the disassembled state by a relatively short exposure to benign UV light. The reversible self‐assembly cycle can be repeated 4 times. A specific concentration range of coumarin ligand and the THF solvent were identified to be the two predominant factors that contribute to the LIRSA of AuNPs. This is the first successful application of reversible photodimerization based on a coumarin derivative in the field of AuNP LIRSA. This LIRSA system may provide unique opportunities for the photoregulated synthesis of many adjustable nanostructures and devices.     

Photochemical assembly of gold nanoparticles utilizing the photodimerization of thymine

Irradiation of UV light to the solution of gold nanoparticles modified with thymine units resulted in the formation of aggregates comprising chemical cross-linking gold nanoparticles through the photodimerization of the thymine units. Transmission electron microscopy and UV-visible absorption measurement showed the aggregates consisting of the gold nanoparticles. The effect of thymine unit density on the nanoparticle surface and the concentration of the gold nanoparticles in solution to the aggregation process were studied by UV-visible absorption measurement.     

Single-Chain Folding Nanoparticles as Carbon Nanotube Catchers

This contribution describes a simple method for preparing polymeric nanoparticles using photodimerization of anthracene moieties on the side chain of terpolymers in dilute regime and transformation of obtained polymeric nanoparticles into pyrene functional nanoparticles via Menschutkin quaternization procedure. Subsequently, pyrene possessing polymeric nanoparticles are attached onto multiwalled carbon nanotube (MWCNT) surfaces by π–π stacking strategy. Gel permeation chromatography, thermal gravimetric analysis, ultraviolet–visible, and fluorescence spectroscopies are used to analyze modified nanoparticles and their precursors. Electron microscopy and dispersion studies show that pyrene-modified polymeric nanoparticles are able to interconnect various CNTs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2709–2714     

Ultrafast energy transfer dynamics of a bioinspired dyad molecule

A caroteno-purpurin dyad molecule was studied by steady-state and pump-probe spectroscopies to resolve the excited-state deactivation dynamics of the different energy levels as well as the connecting energy flow pathways and corresponding rate constants. The data were analyzed with a two-step multi-parameter global fitting procedure that makes use of an evolutionary algorithm. We found that following ultrafast excitation of the donor (carotenoid) chromophore to its S2 state, the energy flows via two channels: energy transfer (70%) and internal conversion (30%) with time constants of 54 and 110 fs, respectively. Additionally, some of the initial excitation is found to populate the hot ground state, revealing another limitation to the functional efficiency. At later times, a back transfer occurs from the purpurin to the carotenoid triplet state in nanosecond timescales. Details of the energy flow within the dyad as well as species associated spectra are disentangled for all excited-state and ground-state species for the first time. We also observe oscillations with the most pronounced peak on the Fourier transform spectrum having a frequency of 530 cm(-1). The dyad mimics the dynamics of the natural light-harvesting complex LH2 from Rhodopseudomonas acidophila and is hence a good model system to be used in studies aimed to further explain previous work in which the branching ratio between the competing pathways of energy loss and energy transfer could be manipulated by adaptive femtosecond pulse shaping.     

An anthracene-appended beta-cyclodextrin-based dyad: study of self-assembly and photoinduced electron-transfer processes

The self-assembly of a beta-cyclodextrin (beta-CD)-based supramolecular dyad is reported, in which the donor anthracene moiety is covalently linked to the smaller rim of the beta-CD and the acceptor pyromellitic diimide (PMDI) is encapsulated within the beta-CD cavity. Encapsulation of the PMDI into the beta-CD cavity was studied by a variety of techniques, which suggested that PMDI is encapsulated so as to position the aromatic part at the centre of the cavity with the 2-propyl end at the narrower rim among the overhanging primary OH groups and the N-ethylpyridinium end situated at the wider rim exposed to water. Photoinduced electron transfer (PET) in the system was studied by fluorescence quenching and laser flash photolysis techniques. At [PMDI]<10(-4) M, the equilibrium is in favour of the free molecules, and under these conditions fluorescence quenching is negligible and diffusion-mediated electron transfer involving the triplet excited state of anthracene predominates. At higher concentrations of PMDI, the equilibrium is largely in favour of the supramolecular dyad and intra-ensemble PET processes predominate. The experimentally determined electron-transfer rate constant agrees very well with that calculated by using the Marcus equation. It was observed that a fraction of the ion pairs survived for more than 200 micros.     

Absorption and fluorescence spectroscopic characterisation of a phenothiazine–flavin dyad

The phenothiazine–phenylene–isoalloxazine dyad, 3-methyl-10-[4-(10-heptyl-10H-phenothiazin-3-yl)-phenyl]-10H-benzo[g]pteridine-2,4-dione, dissolved in either dichloromethane or acetonitrile is characterized by absorption and emission spectroscopy. Absorption cross-section spectra, stimulated emission cross-section spectra, fluorescence quantum distributions, fluorescence quantum yields, and degrees of fluorescence polarisation are determined. The fluorescence decay is determined by time-resolved measurements. The dye photo-stability is investigated by observation of absorption spectral changes due to prolonged blue-light excitation. The absorption spectrum of the dyad resembles the superposition of the absorption of the isoalloxazine (flavin) moiety and of the phenylphenothiazine moiety. Photo-excitation of the flavin moiety causes fluorescence quenching by ground-state reductive electron transfer from phenylphenothiazine to isoalloxazine followed by charge recombination. Photo-excitation of the phenothiazine moiety causes (i) efficient excited-state oxidative electron transfer from phenothiazine to isoalloxazine with successive recombination, and (ii) moderate energy transfer followed by ground-state phenothiazine electron transfer and recombination.     

Design and synthesis of a self-assembled photochemical dyad based on selective imidazole recognition

The unique recognition properties of phenanthroline-strapped zinc porphyrin 1, which displays extremely high affinity for N-unsubstituted imidazoles, has been used as the driving force for the assembly of a photochemical dyad involving a zinc(II) porphyrin as energy donor and a free base porphyrin as energy acceptor. The synthesis of the imidazole-substituted porphyrin is described together with the assembly of the dyad. (1)H NMR titrations confirm the formation of a 1/1 complex between 1 and 6, as well as insertion of the imidazole of the acceptor within the phenanthroline strap of the donor. Preliminary fluorescence quenching measurements show that efficient energy transfer occurs between the self-assembled components.     

Tetrathiafulvalene in a perylene-3,4:9,10-bis(dicarboximide)-based dyad: a new reversible fluorescence-redox dependent molecular system

A donor-acceptor dyad system involving tetrathiafulvalene (TTF) as donor attached by a flexible spacer to perylene-3,4:9,10-bis(dicarboximide) (PDI) as acceptor was synthesized and characterized. The strategy used the preliminary synthesis of an unsymmetrical PDI unit bearing an alcohol functionality as anchor group. Single-crystal analysis revealed a highly organized arrangement in which all PDI molecules are packed in a noncentrosymmetrical pattern. It was shown that the fluorescence emission intensity of the TTF-PDI dyad can be reversibly tuned depending on the oxidation states of the TTF unit. This behavior is attributed to peculiar properties of TTF linked to a PDI acceptor, which fluoresces intrinsically. Consequently, this dyad can be considered as a new reversible fluorescence-redox dependent molecular system.     

A new tetrathiafulvalene-anthracence dyad fusion with the crown ether group: fluorescence modulation with Na+ and C60, mimicking the performance of an "AND" logic gate

In this Note, we describe a new TTF-anthracene dyad fusion with the crown ether unit. It is interesting to find that the fluorescence of this new dyad can be modulated with Na+ and C60, and its fluorescence intensity can be largely enhanced only in the presence of both Na+ and C60. Such fluorescence modulation behavior mimics the performance of a two-input "AND" logic gate.     

Adsorption of cyanine dyes on gold nanoparticles and formation of J-aggregates in the nanoparticle assembly

This paper describes the results of an investigation of the interparticle interactions and reactivities in the assembly of gold nanoparticles mediated by cyanine dyes. The combination of the positively charged indolenine cyanine dyes and the negatively charged gold nanoparticles is shown to form a J-aggregate bridged assembly of nanoparticles, in addition to hydrophobic interparticle and electrostatic dye-particle interactions. Such interparticle interactions and reactivities are studied by probing the absorption of J-aggregates and fluorescence from the dyes and the surface plasmon resonance absorption from the nanoparticles. The J-aggregation of the dyes adsorbed on the nanoparticles is shown to play an important role in the assembly of nanoparticles. The spectral evolution of the J-band of the dyes and the surface plasmon resonance band of the nanoparticles was found to be sensitive to the nature of the charge and the structure of the dyes. The fluorescence quenching for the dyes was shown to be quantitatively related to the surface coverage of the dyes on the nanocrystal surfaces. These findings have provided important information for assessing a two-step process involving a rapid adsorption of the dyes on the nanoparticles and a subsequent assembly of the nanoparticles involving a combination of interparticle J-aggregation and hydrophobic interactions of the adsorbed dyes. The results are discussed in terms of the structural effects of the dyes, and the interparticle molecular interactions and reactivities, which provide important physical and chemical insights into the design of dye-nanoparticle structured functional nanomaterials.     

Controllable Assembly and Separation of Colloidal Nanoparticles through a One‐Tube Synthesis Based on Density Gradient Centrifugation

Self‐assembly of gold nanoparticles into one‐dimensional (1D) nanostructures with finite primary units was achieved by introducing a thin salt (NaCl) solution layer into density gradient before centrifugation. The electrostatic interactions between Au nanoparticles would be affected and cause 1D assembly upon passing through the salt layer. A negatively charged polymer such as poly(acrylic acid) was used as an encapsulation/stabilization layer to help the formation of 1D Au assemblies, which were subsequently sorted according to unit numbers at succeeding separation zones. A centrifugal field was introduced as the external field to overcome the random Brownian motion of NPs and benefit the assembly effect. Such a facile “one‐tube synthesis” approach couples assembly and separation in one centrifuge tube by centrifuging once. The method can be tuned by changing the concentration of interference salt layer, encapsulation layer, and centrifugation rate. Furthermore, positively charged fluorescent polymers such as perylenediimide‐poly(N,N‐diethylaminoethyl methacrylate) could encapsulate the assemblies to give tunable fluorescence properties.     

9-乙烯基蒽和对-N,N-二甲氨基苯乙烯激基络合物的生成和光二聚反应

测定了9-乙烯基蒽和对-N,N-二甲氨基苯乙烯体系在不同极性的溶剂中的荧光光谱和荧光量子产率。发现随着溶剂极性的增加,激基络合物的荧光发生红移,荧光量子产率降低。同时9-乙烯基蒽和对-N,N-二甲氨基苯乙烯之间的光二聚产物的相对产率也降低。并讨论了经过激基络合物中间体的光二聚反应机理。     

四硫富瓦烯和蒽单元构建的新型多功能四硫富瓦烯环蕃的合成与性质

2,6-二(甲硫基)-3,7-二(2-氰乙基硫基)四硫富瓦烯在甲醇钠的作用下消除保护基团, 生成四硫富瓦烯双钠盐, 再与9,10-二(氯甲基)蒽反应生成由四硫富瓦烯(TTF)和蒽单元构建的新型TTF环蕃. 分别通过循环伏安法和化学氧化法对其电化学性质、紫外吸收光谱和荧光性质进行了研究, 实验结果表明此类TTF环蕃化合物对OH^－离子有识别功能. 并通过电化学和紫外吸收光谱研究了这种新型四硫富瓦烯环蕃在金纳米颗粒表面自组装行为.     

A novel donor–donor polymeric dyad of Poly(3‐hexylthiophene‐block‐oligo(anthracene‐9,10‐diyl): Synthesis,solid‐state packing,and electronic properties

A new polymeric dyad of oligo‐anthracene‐block‐poly(3‐hexylthiophene) (Oligo‐ANT‐b‐P3HT) has been synthesized as a donor–donor dyad building block for organic photovoltaics. The polymer dyad and oligomer of anthracene‐9,10‐diyl (Oligo‐ANT) are prepared by Grignard Metathesis. The higher order of crystallinity and molecular chains ordering at solid phase reveal the intrinsic optical and electrical properties of polymeric dyad resulting in relatively higher light harvesting ability compared to the oligo(anthracene‐9,10‐diyl). The UV‐visible spectrum of (Oligo‐ANT‐b‐P3HT) in solution shows broad absorption with two sets of absorption from both anthracene and thiophene core units, covering a wide range of the visible spectrum. The test devices of the blends of polymeric dyad with fullerene C₆₁ (PCBM) show improved photovoltaic performance with a power conversion efficiency of 3.26% upon subjecting to pre‐fabrication thermal treatments. With optimized morphology of the interpenetrating network and the shorter fluorescence lifetime of the annealed dyad/PCBM blends, the effective charge transfer from the donor dyad to PCBM has evidenced. Thus, these studies will allow further synthetic advances to make potential high crystalline polymeric dyads with significantly improved light harvesting capability. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3032–3045     

Structural effects on the ground and excited-state properties of photoswitchable hydrogen-bonding receptors

The ground- and excited-state properties of a series of photochromic barbiturate receptors (N,N'-bis{6-[omega-(anthracen-9-yloxy)alkanoylamino]pyridin-2-yl}-5-t-butyl-isophthalamide, Tn), in which anthracene chromophores are tethered via (CH2)n (n = 1, 3-6) polymethylene linkers to the H-bond receptor moiety, are described. In these systems, the thermally reversible [4pi + 4pi] photodimerization of the anthracenes yields macrocyclic receptors (TnC) that possess significantly reduced affinity toward barbital as compared to their acyclic counterparts. The length of the tether not only determines the overall binding ability of the cyclized receptor but also has a profound influence on the photochemical and photophysical properties of the anthracene chromophores. The reduced mobility experienced by the covalently bound anthracenes controls the reactivity of a fluorescent excimer that is proposed to be an intermediate in the photocyclization process.     

Reversible Optical Writing and Data Storage in an Anthracene‐Loaded Metal–Organic Framework

Metal–organic frameworks (MOFs) enable the design of host–guest systems with specific properties. In this work, we show how the confinement of anthracene in a well‐chosen MOF host leads to reversible yellow‐to‐purple photoswitching of the fluorescence emission. This behavior has not been observed before for anthracene, either in pure form or adsorbed in other porous hosts. The photoresponse of the host–guest system is caused by the photodimerization of anthracene, which is greatly facilitated by the pore geometry, connectivity, and volume as well as the structural flexibility of the MOF host. The photoswitching behavior was used to fabricate photopatternable and erasable surfaces that, in combination with data encryption and decryption, hold promise in product authentication and secure communication applications.     

Photochemical properties of the naphthol-styrylquinoline dyad in neutral and ionic forms

The photochemical properties of the naphthol-styrylquinoline dyad 2-(E)-{4-[4-(3-hydroxynaphthalen-2-yloxy)butoxy]styryl}quinoline (SQ4Np) have been investigated. It has been found that the excited-state acidity of the styrylquinoline (SQ) moiety is reduced by six orders of magnitude and that of the naphthol (Np) moiety increases by four orders of magnitude. As part of the dyad in the neutral and protonated forms, the SQ moiety retains a high photoisomerization quantum yield characteristic of model styrylquinoline. Deprotonation of the Np moiety of the dyad reduces the SQ photoisomerization quantum yields, presumably because of the formation of intramolecular complexes (exciplexes) or energy transfer to the Np anion.