The dynamical Cooperative Lamb Shift in a system of two-level atoms in a slab-geometry

Using the eigenmode analysis, we compute the Cooperative Lamb Shift (CLS) as a function of time from the vector photon model for a system of two-level atoms in a slab-geometry for forward and backward emission in two initial states of weak excitation and complete inversion.     

Cooperative diversity performance of selection relaying over correlated shadowing

The study of relaying systems has found renewed interest in the context of cooperative diversity for communication channels suffering from fading. In particular, dual-hop relaying with diversity combining of the relayed and direct path at the receiver has practical importance and can be considered as a building block for forming larger communication systems. This paper presents novel analytical expressions and numerical results on cooperative diversity performance using selection relaying over correlated lognormal channels for both SC and MRC techniques at the receiver. In addition, an exact framework for comparing the performance and efficiency of the medium access protocol and relay capabilities (TDMA/half-duplex, SDMA/full-duplex) is proposed. Finally, based on the analysis and novel mathematical expressions for the outage probability, we investigate the impact of the lognormal parameters (including correlation) on the cooperative system performance and its efficiency.     

铁和铈共掺杂二氧化钛中的协同效应

利用X射线衍射、拉曼光谱、紫外-可见漫反射光谱和X射线光电子能谱研究了铁和铈对TiO2的共掺杂．当利用溶胶-凝胶法进行单独掺杂时,铁离子可以进入锐钛矿TiO2骨架,但铈离子却不能进入TiO2骨架;当铁和铈共掺杂时,铁离子和铈离子可以同时进入TiO2骨架．铁-铈共掺杂的TiO2表面羟基浓度要远高于单独掺杂或者纯的TiO2．第一次观察到过渡金属离子共掺杂进入TiO2骨架的协同效应．     

系统规模对群体行为的效果

影响细胞群体行为的因素是多种多样的, 除了以前研究的细胞通讯方式和环境因素外, 还与现有文献没有或很少研究的细胞数目(即系统规模)有关. 本文研究了系统规模对一类合成多细胞通讯系统的聚类行为的影响. 在该系统中, 单个系统是由压制振动子和基于延迟的松弛振子整合而成的振子, 而振子之间通过群体感应机制相互耦合. 通过分岔分析和数值模拟发现: 细胞数目的增加不仅可以改变平衡态聚类稳定性区间的大小并诱导新的聚类行为, 而且有利于扩大平衡态聚类的吸引域, 表明细胞分化可能与系统规模有密切关系; 细胞数目的增加还可以极大地丰富平衡态聚类和振动聚类的表现形式和共存方式, 为生物体对环境的适应性提供了良好的基础. 我们的结果不仅扩充了耦合系统的动力学行为, 也为理解多细胞现象奠定了基础. 关键词： 系统规模 群体感应 群体行为 耦合振子     

Improvement of dust removal performance through analysis on the mechanical behavior of fabric in the clothing care system

The present study devised a method of representing and analyzing the mechanical behavior of fabrics in the clothing care system and examined the mechanical movement under various conditions using simulations and an image analysis program called TEMA Motion-Outline tracker. Through this, we proposed an algorithm to improve dust removal by finding conditions that could optimize the mechanical behavior of fabrics. The complex movement algorithm with various RPM configurations could change the number and location of nodes and antinodes. The algorithm effectively removed the dust at all locations, and the improved performance was also seen for real clothes.     

基于Android网络恶意行为检测系统的应用研究

目前Android系统是当今网络用户最对的应用系统之一,而随着科学技术的发展,对于Android系统的恶意行为软件也逐渐增多,给当前的应用用户的财产以及私人信息安全带来了很大的威胁,严重的迟缓了当前移动通信网络技术以及相关于应用客户端的推广。为此本文根据Android系统的特有机构设计出一种基于Binder信息流的自动检测恶意行为系统,以此来解决对于当前网络安全对于Android系统用户带来的负面影响。根据目前网络中的应用通信信息,检测可能存在的泄露用户信息的应用软件为目标,建立信息矢量图以此来分析当前网络中的恶意行为。通过对软件进行检测,研究可实用性和检测效果,结果显示其识别率可以达到100%,并且软件运行只占有内存的7%,结果可以达到当前的Android用户的使用范围。     

Deviations from the Poisson behavior of equilibrium fluctuations in a closed system

A molecular dynamics simulation of dimer formation in an adiabatic, hardcore, square-well, dilute two-dimensional gas yields a non-Poissonian dimer number distribution. Its ratio of variance to mean deviates from unity in a manner recently predicted theoretically.     

Modeling and analyzing of conformity behavior: A fuzzy logic approach

Modeling students’ classroom behaviors can help educators and researchers better understand these behaviors, and further guide students toward well behaviors. Conformity refers to the tendency to change individual behavior to match group behavior. Through observation and experience, educators have accumulated much linguistic knowledge for describing and understanding students’ conformity behavior and influence. This paper presents a fuzzy logic approach for modeling participants’ classroom behaviors. The simulation results about two observed college classes show that the constructed fuzzy logic system is congruent with the observed participants’ classroom behaviors. Existing findings, as well as new findings, are verified through further simulation and analysis. The proposed fuzzy logic system helps educators quantitatively analyze and understand students’ conformity behavior in classroom.     

Elastic behavior of amorphous-crystalline silicon nanocomposite: An atomistic view

In the context of mechanical properties, nanocomposites with homogeneous chemical composition throughout the matrix and the dispersed phase are of particular interest. In this study, the elastic moduli of amorphous-crystalline silicon nanocomposite have been estimated using atomistic simulations. A comparison with the theoretical model reveals that the elastic behavior is significantly influenced by the crystal-amorphous interphase. On observing the effect of volume-fraction of the crystalline phase, an anomalous trend for the bulk modulus is obtained. This phenomenon is attributed to the relaxation displacements of the amorphous atoms.     

Cooperative motions in a finite size model of liquid silica: an anomalous behavior

Finite size effects on dynamical heterogeneity are studied in liquid silica with Molecular Dynamics simulations using the BKS potential model. When the system size decreases relaxation times are found to increase in accordance with previous results in finite-size simulations and confined liquids. It has been suggested that this increase may be related to a modification of the spatially heterogeneous dynamics in confined liquids. In agreement with this hypothesis we observe a decrease of the spatially heterogeneous dynamics when the size decreases. The spatially heterogeneous dynamics is usually characterized by the dynamical aggregation of the most or the least mobile atoms. However we find that the decrease of the dynamical aggregation associated to the least mobile atoms is much more important than the decrease associated to the most mobile atoms when the size decreases. This result associated with a slowing down of the liquid is surprising as it is expected that the dynamical aggregation of the least mobile atoms should increase the slowing down of the liquid dynamics. The decrease of the heterogeneous behaviour is also in contradiction with the increase of the spatially heterogeneous dynamics observed in liquids confined inside nanopores. However, an increase of the non-Gaussian parameter appears both for the confinement inside nanopores and for the finite size simulations. As the non-Gaussian parameter is usually associated with the heterogeneous dynamics, the increase of the non-Gaussian parameter together with a decrease of the spatially heterogeneous dynamics is also surprising.     

Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates

The tribological behaviors of diamond and diamond-like carbon (DLC) films play a major role on their machining and mechanical applications. In this study, diamond and diamond-like carbon (DLC) films are deposited on the cobalt cemented tungsten carbide (WC-Co) substrate respectively adopting the hot filament chemical vapor deposition (HFCVD) technique and the vacuum arc discharge with a graphite cathode, and their friction properties are evaluated on a reciprocating ball-on-plate tribometer with counterfaces of silicon nitride (Si₃N₄) ceramic, cemented tungsten carbide (WC) and ball-bearing steel materials, under the ambient air without lubricating condition. Moreover, to evaluate their cutting performance, comparative turning tests are conducted using the uncoated WC-Co and as-fabricated CVD diamond and DLC coated inserts, with glass fiber reinforced plastics (GFRP) composite materials as the workpiece. The as-deposited HFCVD diamond and DLC films are characterized with energy-dispersive X-ray spectroscopy (EDX), scanning electron microscope (SEM), X-ray diffraction spectroscopy (XRD), Raman spectroscopy and 3D surface topography based on white-light interferometry. Furthermore, Rocwell C indentation tests are conducted to evaluate the adhesion of HFCVD diamond and DLC films grown onto WC-Co substrates. SEM and 3D surface topography based on white-light interferometry are also used to investigate the worn region on the surfaces of diamond and DLC films. The friction tests suggest that the obtained friction coefficient curves that of various contacts exhibit similar evolution tendency. For a given counterface, DLC films present lower stable friction coefficients than HFCVD diamond films under the same sliding conditions. The cutting tests results indicate that flank wear of the HFCVD diamond coated insert is lower than that of DLC coated insert before diamond films peeling off.     

Scaling behavior of two-dimensional domain growth: Computer simulation of vertex models

Computer simulations are performed for vertex models which are coarse-grained models for dynamical cellular patterns in two dimensions. By simulating large systems, we obtain conclusive evidence of scaling behavior, that is, a power law for the growth of the average cell size and the scaling properties for the distribution functions of edge number and size of cells. Several versions of the vertex models are obtained by making some approximations for the equation of motion of a vertex, and we compare the statistical properties of the patterns in the scaling regime.     

Dynamic magnetic behavior of the mixed-spin bilayer system in an oscillating field within the mean-field theory

The dynamic magnetic behavior of the mixed Ising bilayer system (σ=2$\sigma =2$ and S=5/2$S=5/2$), with a crystal-field interaction in an oscillating field are studied, within the mean-field approach, by using the Glauber-type stochastic dynamics for both ferromagnetic/ferromagnetic and antiferromagnetic/ferromagnetic interactions. The time variations of average magnetizations and the temperature dependence of the dynamic magnetizations are investigated. The dynamic phase diagrams are presented in the reduced temperature and magnetic field amplitude plane and they exhibit several ordered phases, coexistence phase regions and critical points as well as a re-entrant behavior depending on interaction parameters.     

La0.3Ca0.7Mn1－xVxO3体系的有序相和再入型自旋玻璃行为研究

通过对La_0.3Ca_0.7Mn_1－xV_xO₃(x=0.05,0.10,0.134,0.20)体系的M-T曲线、ρ-T曲线、ESR谱的测量,研究了Mn位掺V对La_0.3Ca_0.7MnO₃体系电荷序和自旋序的影响.结果表明,当0.05≤x≤0.134时, 体系存在电荷有序(CO)相,其自旋序随温度降低发生顺磁(PM)-电荷有序(CO)-反铁磁(AFM)变化.当x＝0.20时,CO相逐步融化,在40 K发生自旋玻璃转变,表现出再入型的自旋玻璃行为,低温下的基态存在着多种复杂的磁相互作用之间的竞争机理. 关键词： 电荷有序 自旋序 相分离 再入型自旋玻璃行为     

Homogenization of multicoated inclusion-reinforced linear elastic composites with eigenstrains: Application to thermoelastic behavior

A new micromechanical approach for arbitrary multicoated ellipsoidal elastic inclusions with general eigenstrains is developed. We start from the integral equation of the linear elastic medium with eigenstrains adopting the Green's function technique and we apply an ‘(n+1)-phase’ model with a self-consistent condition to determine the homogenized behavior of multicoated inclusion-reinforced composites. The effective elastic moduli and eigenstrains are obtained as well as the residual stresses through the local stress concentration equations. The effective eigenstrains are determined either with the concentration tensors obtained here by the present model, or, more classically, with Levin's formula. In order to assess our micromechanical model, some applications to the isotropic thermoelastic behavior of composites with and without interphase are given. In particular, ‘four-phase’ and ‘three-phase’ models are derived for isotropic homothetic spherical inclusion-reinforced materials, and the results are successfully compared to exact analytical solutions regarding the effective elastic moduli and the effective thermal expansion.     

Modeling of surface stress effects on bending behavior of nanowires: Incremental deformation theory

The surface stress effects on bending behavior of nanowires have recently attracted a lot of attention. In this letter, the incremental deformation theory is first applied to study the surface stress effects upon the bending behavior of the nanowires. Different from other linear continuum approaches, the local geometrical nonlinearity of the Lagrangian strain is considered, therefore, the contribution of the surface stresses is naturally derived by applying the Hamilton's principle, and influence of the surface stresses along all surfaces of the nanowires is captured. It is first shown that the surface stresses along all surfaces have contribution not only on the effective Young's modulus of the nanowires but also on the loading term in the governing equation. The predictions of the effective Young's modulus and the resonance shift of the nanowires from the current method are compared with those from the experimental measurement and other existing approaches. The difference with other models is discussed. Finally, based on the current theory, the resonant shift predictions by using both the modified Euler-Bernoulli beam and the modified Timoshenko beam theories of the nanowires are investigated and compared. It is noticed that the higher vibration modes are less sensitive to the surface stresses than the lower vibration modes.     

Bio-inspired wearable characteristic surface: Wear behavior of cast iron with biomimetic units processed by laser

Stimulated by the cuticles of soil animals, an attempt to improve the wear resistance of compact graphite cast iron (CGI) with biomimetic units on the surface was made by using a biomimetic coupled laser remelting (BCLR) process. The microstructure and microhardness of biomimetic units were examined. The wear behaviors of biomimetic specimens as functions of laser input energy and biomimetic unit shape were investigated under dry sliding condition, respectively. The results indicated that the biomimetic specimens had better wear resistance than the untreated specimens. The wear resistance of the biomimetic specimens increases with the increase of laser input energy due to the increase of the depth and the width of biomimetic units as well as the increase of the microhardness. The specimen with grid biomimetic units had the best resistance, the stria took the second place and the convex showed the worst. The application of laser remelting provided desirable microstructural changes in biomimetic units, which generated the intensified particles effect for improving the wear resistance. The adhesive wear was the dominative wear mechanism for the biomimetic specimens.     

Classical solution of the nonlinear Boltzmann equation in allR 3: Asymptotic behavior of solutions

Proof is given of the existence of a classical solution to the nonlinear Boltzmann equation in allR ³. The solution, which is global in time, exists if the initial data go to zero fast enough at infinity and the mean free path is sufficiently large. The solution is smooth in the space variable if the initial value is smooth. The asymptotic behavior of solutions is also given. It is shown that ast the solution to the Boltzmann equation can be approximated by the solution to the free motion problem.