Note on the use of the vacuum stability test in the study of initiation reactivity of attractive cyclic nitramines in Formex P1 matrix

The zero-order reaction rates (specific rate constants) of isothermal decomposition at 120 °C of plastic bonded explosives (PBXs) were measured by means of the Czech vacuum stability test, STABIL. The PBXs are based on 1,3,5-trinitro-1,3,5-triazinane (RDX), 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX), cis-1,3,4,6-tetranitro-octahydroimidazo-[4,5-d]imidazole (BCHMX), and ε 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (ε-HNIW, ε-CL-20) with 13 wt% of the Formex P1 type matrix, i.e., a matrix of the explosive with pentaerythritol tetranitrate (PETN) bound by 13 wt% of a mixture of 25 wt% of styrene–butadiene rubber and 75 wt% of an oily material. Dependencies were found between the specific rate constants mentioned and the detonation velocities of PBXs, and consequently between these constants and the impact and electric spark sensitivities of pure explosive fillers, i.e., RDX, HMX, HNIW, BCHMX, and PETN. It is stated that the higher impact or electric spark sensitivity of their pure explosive fillers corresponds to the higher thermal reactivity of the given PBXs.     

Thermal behavior and decomposition kinetics of Formex-bonded explosives containing different cyclic nitramines

Thermal behavior and decomposition kinetics of Formex-bonded PBXs based on some attractive cyclic nitramines, such as 1,3,5-trinitro-1,3,5-triazinane (RDX) and 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX). Actually, cis-1,3,4,6-tetranitrooctahy droimidazo-[4,5-d]imidazole (BCHMX) and 2,4,6,8,10,12-hexanitro-2,4,6,8,10, 12-hexaazaisowurtzitane (CL-20), was investigated by means of nonisothermal thermogravimetry (TG) and differential scanning calorimetry (DSC). It was found that the mass loss rate of PBXs involved in this research depends greatly on heating rate and the residue of the decomposition of these PBXs decreases with the heating rate. The onset of the exotherms was noticed at 215.4, 278.7, 231.2 and 233.7 °C with the peak maximum at 235.1, 279.0, 231.2 and 233.7 °C for RDX-Formex, HMX-Formex, CL-20-Formex, and BCHMX-Formex, respectively. Their corresponding exothermic changes were 1788, 1237, 691, and 1583 J g^?1. It was also observed that the dependence on the heating rate for onset temperatures of HMX- and BCHMX-based PBXs was almost the same due to their similar molecular structure. In addition, based on nonisothermal TG data, the kinetic parameters for thermal decomposition of these PBXs were calculated by isoconversional methods. It was shown that the Formex base has great effects on the activation energy distribution of nitramines. It was further found that the kinetic compensation effects occurred during the thermal decomposition of nitramine-based PBXs, and they almost have the same compensation effects due to similar decomposition mechanism.     

Cyclodextrin-assisted capillary electrophoresis for determination of the cyclic nitramine explosives RDX,HMX and CL-20 comparison with high-performance liquid chromatography

A sulfobutyl ether-beta-cyclodextrin-assisted electrokinetic chromatographic method was developed to rapidly resolve and detect the cyclic nitramine explosives 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaaza-isowurtzitane (CL-20), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) and their related degradation intermediates in environmental samples. Development of the electrophoretic method required the measurement of the aqueous solubility of CL-20 which was determined to be 3.59 +/- 0.74 mg/l at 25 degrees C (95% confidence interval, n=3). The performance of the method was then compared to results obtained from existing high-performance liquid chromatography methods including US Environmental Protection Agency method 8330.     

Molecular dynamics simulation studies of the ε-CL-20/HMX co-crystal-based PBXs with HTPB

Molecular dynamics simulations were carried out to explore a ε-CL-20/HMX (2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexazaisowurtzitane/1,3,5,7-tetranitro-1,3,5,7- tetrazacyclooctane) co-crystal-based polymer-bonded explosive (PBX) with HTPB (hydroxyl-terminated polybutadiene). The binding energies, pair correlation functions, and mechanical properties of the PBXs were reported. From the calculated binding energy, it was found that the order of the binding energies per unit surface between the crystalline surface and HTPB is (0 1 0) > (1 0 0) > (0 0 1). The pair correlation function revealed that the H···O and H···N H-bonds exist on the interfaces between the crystalline surfaces and HTPB, and the number of H???O hydrogen bonds (H-bonds) atom pairs is ten times more than that of H???N H-bonds. Additionally, the calculated mechanical data indicated that the stiffness of the co-crystal/HTPB PBX is weaker and its ductility is better than those of the co-crystal.     

Detection of nitroaromatic and cyclic nitramine compounds by cyclodextrin assisted capillary electrophoresis quadrupole ion trap mass spectrometry

An Agilent 3DCE capillary electrophoresis system using sulfobutylether-beta-cyclodextrin (SB-beta-CD)-ammonium acetate separation buffer pH 6.9 was coupled to a Bruker Esquire 3000+ quadrupole ion trap mass detector via a commercially available electrospray ionization interface with acetonitrile sheath flow. The CE-MS system was applied in negative ionization mode for the resolution and detection of nitroaromatic and polar cyclic or caged nitramine energetic materials including TNT [2,4,6-trinitrotoluene, formula mass (FW) 227.13], TNB (1,3,5-trinitrobenzene, FW 213.12), RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine, FW 222.26) HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine, FW 296.16), and CL-20 (2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane, FW 438.19). The CE-MS system conformed to the high-performance liquid chromatography with ultraviolet absorbance detection (HPLC-UV) and HPLC-MS reference methods for the identification of energetic contaminants and their degradation products in soil and marine sediment samples.     

A novel ε-HNIW-based insensitive high explosive incorporated with reduced graphene oxide

A novel ε-HNIW-based explosive formula with low sensitive and high energy was developed by systematically researching the processes of recrystallization, granularity gradation, and coating of ε-HNIW and option of energetic deterrents. The grain size and morphology of HNIW crystals were modified by solvent/antisolvent recrystallization. The ε-HNIW particles were graded and coated by emulsion polymerization method with 551 glue. The binder reduced the mechanical sensitivity of ε-HNIW significantly and showed good compatibility with ε-HNIW, but also weakened the decomposition enthalpy. With the purpose of developing new energetic deterrents in insensitive high explosive formulations, novel carbon materials graphene oxide (GO) and reduced graphene oxide (rGO) were prepared and incorporated in plastic-bonded explosive (PBX) formulations. For comparison, the effects of conventional deterrent flake graphite were also involved. It turned out that the mechanical sensitivities of ε-HNIW/551 glue have all reduced to some extent with the incorporation of graphite, GO, and rGO. Flake graphite induced the PBX decompose earlier slightly and weaken the heat output. The addition of GO resulted in noticeable antedating decomposition of ε-HNIW/551 glue although remarkably increased the decomposition heat. The formula of ε-HNIW/551 glue/rGO provided a moderate growth in decomposition heat and best thermal stability. In slow cook-off tests, the formulas of ε-HNIW/551 glue and ε-HNIW/551 glue/rGO showed good thermal stability and might be qualified to apply safely under 200 °C. Comprehensively considering the mechanical sensitivity, thermals stability, energy performance, and practical application, ε-HNIW/551 glue/rGO is supposed to be an eligible insensitive high-energy PBX formula.     

Structures and energies of the tautomers of 1-nitroso-1,2,4-triazol-5-one-2-oxide: New triazol-5-one-n-oxides

Molecular orbital calculations at the DFT-B3LYP/aug-cc-pVDZ level are performed for the possible tautomers of 1-nitroso-1,2,4-triazol-5-one-2-oxide. We have examined the substitution effects of carbonyl, N-oxide, and nitroso groups by comparing the calculated geometries, relative energies, and electrostatic potentials of model molecules. The optimized structures, vibrational frequencies, and thermodynamic values for triazolone-N-oxides are obtained in the ground state. The results show that 1H, 4H tautomers are most stable. Detonation velocity and detonation pressure are evaluated by the Kamlet-Jacob equations based on the predicted density and the calculated heat of explosion. The explosive properties of the designed compounds seem to be promising compared with those of 1,3,5-trinitroperhydro-1,3,5-triazine (D 8.75 km/s, P 34.70 GPa), octahydro-1,3,5,7-tetrnitro-1,3,5,7-tetrazocine (D 9.10 km/s, P 39.3 GPa), and 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (D 9.20 km/s, P 42.0 GPa).     

Precise and accurate compound-specific carbon and nitrogen isotope analysis of RDX by GC-IRMS

A new analytical method is presented for the compound-specific carbon and nitrogen isotope ratio analysis of a thermo-labile nitramine explosive hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) by gas chromatograph coupled to an isotope ratio mass spectrometer (GC-IRMS). Two main approaches were used to minimise thermal decomposition of the compound during gas chromatographic separation: programmed temperature vaporisation (PTV) as an injection technique and a high-temperature ramp rate during the GC run. δ¹⁵N and δ¹³C values of RDX measured by GC-IRMS and elemental analyser (EA)-IRMS were in good agreement within a standard deviation of 0.3‰ and 0.4‰ for nitrogen and carbon, respectively. Application of the method for the isotope analysis of RDX during alkaline hydrolysis at 50°C revealed isotope fractionation factors ε _carbon?=??7.8‰ and ε _nitrogen?=??5.3‰.     

Neutral desorption using a sealed enclosure to sample explosives on human skin for rapid detection by EESI-MS

A novel air-tight neutral desorption enclosure has been fabricated to noninvasively sample low picograms of explosives 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetraazocine (HMX), triacetone triperoxide (TATP), and nitroglycerin (NG) from human skin using a neutral nitrogen gas beam. Without further sample pretreatment, the explosive mixtures collected from the skin surface were directly transported by a nitrogen carrier gas over a 4-m distance for sensitive detection and rapid identification by extractive electrospray ionization tandem mass spectrometry.     

A first‐principles investigation of the hydrogen bond interaction and the sensitive characters in cis‐1,3,4,6‐tetranitrooctahydroimidazo‐[4,5‐d]imidazole

A theoretical study of structural and electronic properties of cis‐1,3,4,6‐tetranitrooctahydroimidazo‐[4,5‐d]imidazole (BCHMX) crystal is performed using density functional theory. The band structure, the total density of states, the atomic orbit projected density of states (PDOS) of C, N, O, and H, and Mulliken population analysis are discussed. The study by analyzing the PDOS shows that the structure of BCHMX crystal possesses C? H···O intra‐ and intermolecular hydrogen bonding. There are hydrogen bonds between H₃‐1s and O₅‐2p orbits, H₂‐1s and O₆‐2p orbits of intramolecules and between H₂‐1s and O₁‐2p orbits of intermolecules. The reasons for the smaller impact sensitivity compared with β‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocane and 1,3,5‐trinitro‐1,3,5‐triazinane are also explored from the band gap in the crystal and the weakest bond dissociation energy in single molecule. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

A LC-MS method allowing the analysis of HMX and RDX present at the picogram level in natural aqueous samples without a concentration step

The introduction of chloroform into the nebulising gas of a LC/MS electrospray interface (ESI), in a perfectly controlled way, leads to the formation of intense adducts ([M+Cl]⁻) when a mobile phase containing HMX (1,3,5,7-tetranitro-1,3,5,7-tetrazacyclooctane or octogen) and RDX (1,3,5-trintro-1,3,5-triazacyclohexane or hexogen) is eluted. This LC/MS method allows the direct analysis of aqueous samples containing HMX and RDX at the pictogram level without a concentration step. The method is used to determine HMX and RDX concentrations in ground water samples from a military site.     

On the excited electronic state dissociation of nitramine energetic materials and model systems

In order to elucidate the difference between nitramine energetic materials, such as RDX (1,3,5-trinitro-1,3,5-triazacyclohexane), HMX (1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane), and CL-20 (2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane), and their nonenergetic model systems, including 1,4-dinitropiperazine, nitropiperidine, nitropyrrolidine, and dimethylnitramine, both nanosecond mass resolved excitation spectroscopy and femtosecond pump-probe spectroscopy in the UV spectral region have been employed to investigate the mechanisms and dynamics of the excited electronic state photodissociation of these materials. The NO molecule is an initial decomposition product of all systems. The NO molecule from the decomposition of energetic materials displays cold rotational and hot vibrational spectral structures. Conversely, the NO molecule from the decomposition of model systems shows relatively hot rotational and cold vibrational spectra. In addition, the intensity of the NO ion signal from energetic materials is proportional to the number of nitramine functional groups in the molecule. Based upon experimental observations and theoretical calculations of the potential energy surface for these systems, we suggest that energetic materials dissociate from ground electronic states after internal conversion from their first excited states, and model systems dissociate from their first excited states. In both cases a nitro-nitrite isomerization is suggested to be part of the decomposition mechanism. Parent ions of dimethylnitramine and nitropyrrolidine are observed in femtosecond experiments. All the other molecules generate NO as a decomposition product even in the femtosecond time regime. The dynamics of the formation of the NO product is faster than 180 fs, which is equivalent to the time duration of our laser pulse.     

The very far-infrared spectra of energetic materials and possible confusion materials using terahertz pulsed spectroscopy

We have measured the terahertz absorption spectra of 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX), pentaerythritol tetranitrate (PETN), 1,3,5,7-tetranitro-1,3,5,7-tetrazacyclooctane (HMX), 2,4,6-trinitrotoluene (TNT), the plastic explosives Semtex H, SX2, and Metabel, and a number of confusion materials using terahertz pulsed transmission spectroscopy. Spectral fingerprints were obtained from 3 to 133 cm⁻¹. The spectra of the plastic explosives are dominated by the spectral signatures of their explosive components due to low frequency vibrations and crystalline phonon modes. Importantly, the terahertz spectra of the confusion materials show no resemblance to the explosives spectra. The refractive indices obtained for the plastic explosives and confusion materials allowed us to derive reflectance spectra, which appear distinct and so suggest that terahertz reflection spectroscopy is a suitable tool for the detection of concealed explosives in security applications.     

Investigation on the dissolution behavior of 2HNIW·HMX co-crystal prepared by a solvent/non-solvent method in N,N-dimethylformamide at T = (298.15–318.15) K

Journal of Thermal Analysis and Calorimetry - 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexazisowurtzitane (HNIW)·1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX) co-crystal in a 2:1 molar ratio was...     

Temperature-dependent far-infrared spectra of single crystals of high explosives using terahertz time-domain spectroscopy

Survey spectra of single-crystal HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine), RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine), and PETN (pentaerythritol tetranitrate) were acquired in the region from 10 to 80 cm(-1) using terahertz time-domain spectroscopy. The spectra were taken at temperatures ranging from 8.4 to 300 K. Generally, the spectra show multiple absorption peaks in the range 50-80 cm(-1), with PETN (110) showing strong absorption features at room temperature. RDX (210) is the most notable in the region 10-40 cm(-1), showing multiple spectral features, while HMX (010) shows a very broad absorption at 47.8 cm(-1) with a fwhm of 37.3 cm(-1). Future plans include polarization-dependent investigations for multiple crystallographic orientations over an increased spectral range and higher-level theoretical calculations.     

Computational studies on the structures and energies of the tautomers of 1-amino-3-nitrotriazol-5-one-2-oxide

Molecular orbital calculations at the DFT-B3LYP/aug-cc-pVDZ level were performed for the possible tautomers of 1-amino-3-nitro-1,2,4-triazol-5-one-2-oxide. We have examined the substitution effects of amino and nitro groups by comparing calculated geometries, relative energies, and electrostatic potentials of model molecules. The optimized structures, vibrational frequencies, and thermodynamic values for triazol-5-one-N-oxides were obtained in their ground state. The results show 1H, 4H tautomers to be most stable. Detonation velocity and detonation pressure were evaluated by the Kamlet and Jacob equations based on the predicted density and the calculated heat of explosion. Explosive properties appear to be promising compared with those of 1,3,5-trinitro-1,3,5-triazine (D = 8.75 km/s, P = 34.7 Gpa) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (D = 8.96 km/s, P = 35.96 Gpa), 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (D = 9.20 km/s, P = 42.0 Gpa) and octanitrocubane (D = 9.90 km/s, P = 48.45 GPa). The designed triazol-5-one-N-oxides satisfy the criteria of high energy density materials.     

Computational Design of High Energy RDX-Based Derivatives: Property Prediction,Intermolecular Interactions,and Decomposition Mechanisms

A series of new high-energy insensitive compounds were designed based on 1,3,5-trinitro-1,3,5-triazinane (RDX) skeleton through incorporating -N(NO₂)-CH₂-N(NO₂)-, -N(NH₂)-, -N(NO₂)-, and -O- linkages. Then, their electronic structures, heats of formation, detonation properties, and impact sensitivities were analyzed and predicted using DFT. The types of intermolecular interactions between their bimolecular assemble were analyzed. The thermal decomposition of one compound with excellent performance was studied through ab initio molecular dynamics simulations. All the designed compounds exhibit excellent detonation properties superior to 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20), and lower impact sensitivity than CL-20. Thus, they may be viewed as promising candidates for high energy density compounds. Overall, our design strategy that the construction of bicyclic or cage compounds based on the RDX framework through incorporating the intermolecular linkages is very beneficial for developing novel energetic compounds with excellent detonation performance and low sensitivity.     

The effect of crystal structure on the thermal reactivity of CL-20 and its C4-bonded explosives

The critical temperature and mechanism functions for thermal decomposition of ε-CL-20, RS-ε-CL-20, α-CL-20, ε-CL-20/C4, and RS-ε-CL-20/C4 were evaluated based on non-isothermal TG data. A two-step mechanism has been found for thermal decomposition of α-CL-20, ε-CL-20/C4, and RS-ε-CL-20/C4, where the initial step is partly controlled by crystal structure of CL-20. The more reasonable mean activation energies could be obtained after peak separation for each individual steps. In fact, the activation energy for the post integrated process is almost equivalent with that of the second step, indicating that the total activation energy at the main decomposition process is dominated by thermolysis of CL-20 molecular. Besides, it has been found that the decomposition of C4 matrix does not affect the decomposition of normal ε-CL-20, resulting in identical activation energy and reaction model. However, the interaction between the C4 matrix and RS-ε-CL-20 is significant especially at the initial stage, where the activation energy of RS-ε-CL-20/C4 was overestimated before peak separation, while the activation energy for the second step due to thermolysis of CL-20 molecular is underestimated. The first decomposition step for α-CL-20, ε-CL-20/C4, and RS-ε-CL-20/C4 could be considered as autocatalytic process (AC model), whereas the second as JMA model, which is also applicable to that of pure ε-CL-20 and RS-ε-CL-20. Moreover, The critical temperatures of thermal explosion (T _b) are obtained as 205.6, 205.5, 209.4, 214.4, and 227.5 °C for α-CL-20, ε-CL-20, RS-ε-CL-20, ε-CL-20/C4, and RS-ε-CL-20/C4, respectively. It proves that the C4 matrix could stabilize ε-CL-20 while the crystal form of CL-20 has little effect on its thermal stability.     

Extraction and analysis of trace amounts of cyclonite (RDX) and its nitroso-metabolites in animal liver tissue using gas chromatography with electron capture detection (GC-ECD)

An efficient extraction and cleanup technique, and an instrumental detection method suitable for determination of trace amounts of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) and its nitroso-metabolites in animal liver tissue were developed and validated in this paper. The method includes the extraction of explosives from liver tissue samples using accelerated solvent extraction (ASE) followed by cleanup using florisil and styrene-divinyl benzene (SDB) cartridges to remove interfering naturally endogenous compounds. The instrumental analysis was conducted using a capillary column gas chromatograph coupled with an electron capture detector (GC-ECD). High recoveries (58.9-106.8%) of RDX, hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine (MNX), hexahydro-1,3-dinitroso-5-nitro-1,3,5-triazine (DNX), and hexahydro-1,3,5-trinitroso-1,3,5-triazine (TNX) were achieved at all concentrations studied. RDX, MNX, and TNX gave higher recoveries than DNX at all three tested concentrations (50, 250, 1250 ng/g). Overall recoveries of RDX, MNX, DNX, and TNX from 1 g beef liver samples containing 50, 250, and 1250 ng/g were 80.1, 82.8, 68.9, and 80.4%, respectively. The optimal injection port temperature range was 160-170 °C for analysis of RDX and its nitroso-metabolites. Higher or lower temperatures than 160-170 °C decreased signal amplitudes. RDX was unstable in the liver extraction matrix; as much as 50% of RDX was degraded 10 days after extraction if keeping the liver sample extracts at room temperature. Degradation of RDX to MNX, DNX, or TNX was not detected during the sample storage, extraction, or instrument analysis processes. Other optimized extraction and GC conditions are also discussed.     

Micellar extraction and high performance liquid chromatography-ultra violet determination of some explosives in water samples

An analytical method based on the cloud point extraction combined with high performance liquid chromatography is used for the extraction, separation and determination of four explosives; octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazine (HMX), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), 2,4,6-trinitrotoluene (TNT) and pentaerythritol tetranitrate (PETN). These compounds are extracted by using of Triton X-114 and cetyl-trimethyl ammonium bromide (CTAB). After extraction, the samples were analyzed using a HPLC-UV system. The parameters affecting extraction efficiency (such as Triton X-114 and CTAB concentrations, amount of Na₂SO₄, temperature, incubation and centrifuge times) were evaluated and optimized. Under the optimum conditions, the preconcentration factor was 40 and the improvement factors of 34, 29, 61 and 42 with detection limits of 0.09, 0.14, 0.08 and 0.40 (μg L⁻¹) were obtained for HMX, RDX, TNT and PETN, respectively. The proposed method was successfully applied to the determination of these compounds in water samples and showed recovery percentages of 97-102% with RSD values of 2.13-4.92%.