Flue Gas Desulfurization by Dielectric Barrier Discharge

There are many problems with flue gas desulfurization by traditional gas ionization discharge, including the large size of the plasma source, high energy consumption, and the need for a traditional desulfurization method. This paper introduces oxidization of SO₂ to sulfuric acid (H₂SO₄) in a duct by reactive oxygen species (O₂ ⁺, O₃) produced by strong ionization dielectric barrier discharge. The entire plasma reaction process is completed within the duct without the use of absorbents, catalysts, or large plasma source. The reactive oxygen species O₂ ⁺ reacts with gaseous H₂O in the flue gas to generate ·OH radicals, which can oxidize trace amounts of SO₂ in large volumes of the flue gas to produce H₂SO₄. Sulfuric acid is also produced by O₃ oxidation of SO₂ to SO₃, and SO₃ reacting with gaseous H₂O in the flue gas. Experimental results showed that with a gas temperature of 22 °C and reactive oxygen species injection rate of 0.84 mg/L, the SO₂ removal rate was 81.4 %, and the SO₄ ^2? concentration in the recovered liquid H₂SO₄ reached 53.8 g/L.     

Thermal runaway reaction evaluation of two by-products mixed with cumene hydroperoxide in the oxidation tower

Oxygen (O₂) or air is widely used to produce cumene hydroperoxide (CHP) in the cumene oxidation tower. The aim of this study was applied to analyze thermal hazard of two by-products including alpha-methylstyrene (AMS) and acetophenone (AP) in a CHP oxidation tower. Differential scanning calorimetry (DSC) and thermogravimetry (TG) were operated to evaluate thermal runaway reaction of CHP mixed with AMS and AP. Exothermic onset temperature (T ₀), maximum temperature (T _max), activation energy (E _a), etc., that were employed to prevent and protect thermal runaway reaction and explosion in the manufacturing process and storage area. In view of proactive loss prevention, the inherently safer handling procedure and storage situation should be maintained in the chemical industries. The T ₀ of 30 mass% CHP was determined to be 105 °C by DSC. Therefore, the T ₀ of 30 mass% CHP mixed with AMS was determined to be 60–70 °C by DSC. The exothermic reaction of CHP/AP and CHP/AMS by DSC under N₂ reaction gas is thermal decomposition of oxygen–oxygen bond (–O–O–) because of the anaerobic reaction.     

Thermal decomposition of SO4 2?-intercalated Mg–Al layered double hydroxide

The thermal properties of SO₄ ^2?-intercalated Mg?CAl layered double hydroxide (SO₄·Mg?CAl LDH) were investigated using simultaneous thermogravimetry?Cmass spectrometry (TG?CMS), and the elimination behavior of sulfur oxides from this double hydroxide was examined. The TG?CMS results showed that SO₄·Mg?CAl LDH decomposed in five stages. The first stage involved evaporation of surface-adsorbed water and interlayer water in SO₄·Mg?CAl LDH. In the second, third, and fourth stages, dehydroxylation of the brucite-like octahedral layers in SO₄·Mg?CAl LDH occurred. The fifth stage corresponded to the elimination of SO₄ ^2? intercalated in the interlayer of Mg?CAl LDH, producing SO₂ and SO₃. The thermal decomposition of SO₄·Mg?CAl LDH resulted in the formation of SO₂ and SO₃ at 900?C1000?°C, which then reacted with H₂O to form H₂SO₃ and H₂SO₄. The elimination of sulfur oxides increased with the decomposition time and temperature. Almost all of the intercalated SO₄ ^2? was desulfurized from SO₄·Mg?CAl LDH at 1000?°C; however, Mg?CAl oxide was not formed due to the production of MgO and MgAl₂O₄.     

Variable temperature PXRD investigation of the phase changes during the dehydration of potassium Tutton salts

The thermal dehydration of the potassium Tutton salts K₂M(SO₄)₂·6H₂O (M = Mg, Co, Ni, Cu, Zn) was investigated using thermal gravimetric analysis (TG), differential scanning calorimetry (DSC), FTIR, and variable temperature powder X-ray diffraction. While each Tutton salts lost all six waters of hydration when heated to 500 K, the decomposition pathway depended on the divalent metal cation. K₂Ni(SO₄)₂·6H₂O lost all six waters in a single step, and K₂Cu(SO₄)₂·6H₂O consistently lost water in two steps in capped and uncapped cells. In contrast, multiple decomposition pathways were observed for the magnesium, cobalt, and zinc Tutton salts when capped and uncapped TG cells were used. K₂Zn(SO₄)₂·6H₂O lost the waters of hydration in a single step in an uncapped cell and in two steps in a capped cell. Both K₂Mg(SO₄)₂·6H₂O and K₂Co(SO₄)₂·6H₂O decomposed in a series of steps where the stability of the intermediates depended on the cell configuration. A greater number of phases were often observed in DSC and capped-cells TG experiments. A quasi-equilibrium model is presented that could explain this observation. These results highlight that experimental conditions play a critical role in the observed thermal decomposition pathway of Tutton salts.     

Thermal decomposition of hydrogen peroxide in the presence of sulfuric acid

Hydrogen peroxide (H₂O₂) is popularly employed as a reaction reagent in cleaning processes for the chemical industry and semiconductor plants. By using differential scanning calorimetry (DSC) and vent sizing package 2 (VSP2), this study focused on the thermal decomposition reaction of H₂O₂ mixed with sulfuric acid (H₂SO₄) with low (0.1, 0.5 and 1.0 N), and high concentrations of 96 mass%, respectively. Thermokinetic data, such as exothermic onset temperature (T ₀), heat of decomposition (ΔH _d), pressure rise rate (dP/dt), and self-heating rate (dT/dt), were obtained and assessed by the DSC and VSP2 experiments. From the thermal decomposition reaction on various concentrations of H₂SO₄, the experimental data of T ₀, ΔH, dP/dt, and dT/dt were obtained. Comparisons of the reactivity for H₂O₂ and H₂O₂ mixed with H₂SO₄ (lower and higher concentrations) were evaluated to corroborate the decomposition reaction in these systems.     

An investigation on solid-state pyrolytic decomposition of barium trihemiaquatris(oxalato)lanthanate(III)decahydrate using TG–DTA in air and DSC in nitrogen

A heterobimetallic oxalate coordination compound, barium(II)trihemiaquatris(oxalato)lanthanate(III)decahydrate, has been synthesized and characterized by elemental analysis, IR and electronic spectral studies. Crystalline nature of the compound with orthorhombic symmetry is corroborated from powder X-ray diffraction studies. The solid-state pyrolytic decomposition studies (TG, DTG and DTA) in air showed that the compound decomposed mainly to BaO, La₂O₃ and BaLa₂O₄ along with carbides of both the metal at ca. 1,000 °C through a number of intermediate steps. The DSC studies in nitrogen up to 670 °C found that the compound crumbled through several endothermic and one exothermic processes. The kinetic parameters, E*, lnk _o, ΔH ^# and ΔS ^# of dehydration and decomposition steps in nitrogen are evaluated from DSC peaks and discussed.     

Thermal runaway reaction evaluation of benzoyl peroxide using calorimetric approaches

Benzoyl peroxide (BPO) has been used as initiator or medicine in the chemical industries. Several thermal runaway reactions, fires, and explosions have occurred in Taiwan due to its thermal reactivity and explosive properties. A serious accident was analyzed occurring at Fu-Kao Chemical Plant in Taiwan because of runaway reaction in a batch reactor including methyl acrylate (MA), acrylic acid (AA), and BPO. This accident resulted in one death and more than 100 injuries. Differential scanning calorimetry and thermogravimetry (TG) were used to investigate and calculate the thermal hazard and safety parameter of BPO. Finally, the effects of MA and AA mixed with BPO by DSC/TG were analyzed in this study. The T ₀ of BPO was 109 °C in this study. Therefore, the T ₀ of BPO/MA was calculated to be 105 °C by DSC. AA and MA were identified as catalyst for thermal decomposition of BPO.     

Studies on lanthanoid sulphites: Part IV. Thermal decomposition of erbium sulphite trihydrate under various experimental conditions

Thermal behaviour of Er₂(SO₃)₃· 3H₃O has been studied by means of TG, DTG, DTA, DSC and EGA techniques. Experimental conditions were also varied, $\text{viz.}$ sample size, heating rate and the atmosphere.The dehydration starts slowly above 150°C but the release of water is rapid around 250°C. SO₂ gas is evolved slowly and simultaneously with H₂O. The anhydrous sulphite is formed below 300°C after which it decomposes through several reactions accompanied by a release of mainly SO₂, but also a small amount of SO₃ near 650°C. In air, there is a clear plateau in the TG curve between 600 and 800°C; the weight loss involved depends strongly on the sample size and heating rate, however. A plausible explanation for the plateau is the formation of a mixture of Er₂(SO₄)₃, Er₂O(SO₄)₂ and Er₂O₂SO₄. The next plateau around 900 – 1000°C corresponds to Er₂O(SO₄)₂ and Er₂O₂SO₄. In nitrogen atmosphere, the first plateau after the anhydrous sulphite appears later in the weight scale as compared to air. Although the position of the plateau corresponds to the sesquisulphide, it is according to X-ray diffraction results a mixture of Er₂O₂(SO₄) and Er₂O₃. In both air and nitrogen, the final reaction step above 1000°C is the formation of Er₂O₃.     

Synthesis of La<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>7</Subscript> by thermal treatment of mechanically activated salt mixture

A lanthanum zirconate La₂Zr₂O₇ was synthesized by soft mechanochemical method using zirconium oxynitrate ZrO(NO₃)₂·6H₂O and lanthanum carbonate La₂(CO₃)₃·8H₂O as reagents. Mechanical activation of the reagents was carried out in a centrifugal planetary ball mill. The processes occurring during calcination of the jointly and the separately mechanically activated salt mixture were studied using DSC, TG coupled with mass spectrometry, XRD analysis, and FTIR spectroscopy. It was shown that in the course of joint mechanical activation in the mill alongside with intimate mixing of the reagents and their amorphization exchange reaction occurred, producing lanthanum nitrate, basic lanthanum nitrate, basic zirconium carbonate, and hydrated zirconium oxide. The DSC curve of the jointly mechanically activated salt mixture showed a strong exothermic peak at 878 °C which was not associated with mass loss. This peak was attributed to La₂Zr₂O₇ crystallization in agreement with XRD data. Nanocrystalline lanthanum zirconate synthesized by annealing of the jointly mechanically activated salt mixture was characterized using XRD analysis, scanning, and transmission electron microscopy.     

Thermal runaway analyses for two organic peroxides with H2O and dry fire-extinguishing chemicals by DSC and VSP2

In recent years, organic peroxides, including methyl ethyl ketone peroxide (MEKPO) and cumene hydroperoxide (CHP), have often caused thermal runaway reactions, fires, and thermal explosions worldwide. Under normal circumstances, H₂O and dry fire-extinguishing chemicals are often employed to eliminate fire situations. We evaluated the thermal runaway reaction for MEKPO and CHP mixed with H₂O and dry fire-extinguishing chemicals by differential scanning calorimetry, and thermal runaway reaction for CHP mixed with dry fire-extinguishing chemicals by vent sizing package 2. The results showed that ABC dry chemical, BC dry chemical, and XBC dry chemical all caused the decomposition of MEKPO to occur at lower onset temperature and H₂O caused the ΔH _d of MEKPO to become higher. On the other hand, H₂O and XBC dry chemical induced the decomposition of CHP to occur at lower onset temperature as well as lower thermal explosion temperature. The maximum of self-heating rate ((dT/dt)_max) and the maximum pressure-rise rate ((dP/dt)_max) of CHP mixed with dry fire-extinguishing chemicals were measured lower than CHP alone. The results indicated that MEKPO and CHP are highly hazardous when mixed with H₂O and some dry fire-extinguishing chemicals. In view of loss prevention, the results can be useful references for fire fighters dealing with thermal upsets in chemical plants.     

Study on thermal decomposition and oxidation kinetics of cation exchange resins using non-isothermal TG analysis

Kinetics of two successive thermal decomposition reaction steps of cationic ion exchange resins and oxidation of the first thermal decomposition residue were investigated using a non-isothermal thermogravimetric analysis. Reaction mechanisms and kinetic parameters for three different reaction steps, which were identified from a FTIR gas analysis, were established from an analysis of TG analysis data using an isoconversional method and a master-plot method. Primary thermal dissociation of SO₃H⁺ from divinylbenzene copolymer was well described by an Avrami–Erofeev type reaction (n = 2, g(α) = [?ln(1 ? α)]^1/2]), and its activation energy was determined to be 46.8 ± 2.8 kJ mol^?1. Thermal decomposition of remaining polymeric materials at temperatures above 400 °C was described by one-dimensional diffusion (g(α) = α ²), and its activation energy was determined to be 49.1 ± 3.1 kJ mol^?1. The oxidation of remaining polymeric materials after thermal dissociation of SO₃H⁺ was described by a phase boundary reaction (contracting volume, g(α) = 1?(1 ? α)^1/3). The activation energy and the order of oxygen power dependency were determined to be 101.3 ± 13.4 and 1.05 ± 0.17 kJ mol^?1, respectively.     

Thermal Decomposition of Strontium Iron Citrate

The citrate precursor method has been used to synthesise ultrafine SrFe₁₂O¹⁹. The thermal decomposition of citrate precursor SrFe₁₂O₆ (C₆H₆O₇)₁₃ was investigated by TG, DTG and DTA techniques, gas and chemical analyses. The citrate precursor on decomposition in static air atmosphere yields pure and stoichiometric SrFe₁₂O₁₉. The decomposition consists of three major steps, the formation of acetone dicarboxylate complex occurs around 165°C. The citrate groups are completely destroyed in the temperature range 195–315°C resulting in the formation of complex carbonate with the evolution of acetone and CO₂ gas. The decomposition of carbonate results in the formation of ultrafine SrFe₁₂O₁₉ below 550°C with the evolution of CO₂ gas. The ultrafine particles are observed as platelet clusters having crystallite size 13 nm and surface area 76.4 m² g^?1. The citrate precursor and the decomposed products were characterised by IR, NMR, XRD, SEM and surface area measurements.     

Synthesis,characterization, and thermal study of solid-state alkaline earth metal mandelates,except beryllium and radium

Characterization, thermal stability, and thermal decomposition of alkaline earth metal mandelates, M(C₆H₅CH(OH)CO₂)₂, (M = Mg(II), Ca(II), Sr(II), and Ba(II)), were investigated employing simultaneous thermogravimetry and differential thermal analysis or differential scanning calorimetry, (TG–DTA or TG–DSC), infrared spectroscopy (FTIR), complexometry, and TG–DSC coupled to FTIR. All the compounds were obtained in the anhydrous state and the thermal decomposition occurs in three steps. The final residue up to 585 °C (Mg), 720 °C (Ca), and 945 °C (Sr) is the respective oxide MgO, CaO, and SrO. For the barium compound the final residue up to 580 °C is BaCO₃, which is stable until 950 °C and above this temperature the TG curve shows the beginning of the thermal decomposition of the barium carbonate. The results also provide information concerning the thermal behavior and identification of gaseous products evolved during the thermal decomposition of these compounds.     

Polyoxidovanadate complexes: synthesis,structures and catalytic oxidative bromination of phenol red

By selecting appropriate ligands, two polyoxidovanadate complexes, [Ni(en)₂]₃[V₁₈O₄₂Cl]·7H₂O·2H₃O⁺ (1) and [H₂N(CH₃)₂]₃[PV₁₄O₄₂]·2TMP·6H₃O⁺ (2), have been synthesized at different pH values using V₂(SO₄)₃, Ni(CH₃COO)₂, and H₆TTHA (for 1), VO(acac)₂ and TPP (for 2) (en = C₂H₈N₂, TPP = thiamine pyrophosphate, TMP = thiamine monophosphate, H₆TTHA = 1,3,5-triazine-2,4,6-triamine hexaacetic acid). The complexes have been characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis (TG), and single crystal X-ray diffraction. The complexes catalyze the oxidation of the organic substrate phenol red in the presence of H₂O₂ and bromide, and the reaction system is considered as a model for hydrogen peroxide determination. The reaction rate constants (k) for 1 and 2 are calculated as 3.729 × 10³ and 4.083 × 10³ (mol L)^?2 s^?1. The maximum conversion rate of phenol red for 1 is 83.32%, while for 2 is 81.12%.     

Evolved gas analysis of coal-derived pyrite/marcasite

The products evolved during the thermal decomposition of the coal-derived pyrite/marcasite were studied using simultaneous thermogravimetry coupled with Fourier-transform infrared spectroscopy and mass spectrometry (TG-FTIR–MS) technique. The main gases and volatile products released during the thermal decomposition of the coal-derived pyrite/marcasite are water (H₂O), carbon dioxide (CO₂), and sulfur dioxide (SO₂). The results showed that the evolved products obtained were mainly divided into two processes: (1) the main evolved product H₂O is mainly released at below 300 °C; (2) under the temperature of 450–650 °C, the main evolved products are SO₂ and small amount of CO₂. It is worth mentioning that SO₃ was not observed as a product as no peak was observed in the m/z = 80 curve. The chemical substance SO₂ is present as the main gaseous product in the thermal decomposition for the sample. The coal-derived pyrite/marcasite is different from mineral pyrite in thermal decomposition temperature. The mass spectrometric analysis results are in good agreement with the infrared spectroscopic analysis of the evolved gases. These results give the evidence on the thermal decomposition products and make all explanations have the sufficient evidence. Therefore, TG–MS–IR is a powerful tool for the investigation of gas evolution from the thermal decomposition of materials.     

Study of thermal properties of flame retardant epoxy resin treated with hexakis[p-(hydroxymethyl)phenoxy]cyclotriphosphazene

Hexakis[p-(hydroxymethyl)phenoxy]cyclotriphosphazene (HHPCP) is prepared and characterized by FTIR, ¹H-NMR, and ³¹P-NMR spectroscopy. Then an investigation of the flame retardancy, thermal decomposition behavior of epoxy resin (EP) containing HHPCP is carried out using limiting oxygen (LOI) test, horizontal flame test, smoke density rate (SDR) test, thermogravimetric analysis (TG), and thermal gravimetric analyzer-mass spectrometry (TG-MS). The decomposition process of HHPCP is studied by TG-MS and FTIR. The result shows that the LOI value of EP increase from 20.5 to 26.5 %, when 7.5 mass% HHPCP is added into EP. The addition of 1 mass% nano-montmorillonite (nMMT) into EP–7.5 mass% HHPCP sample as synergist can increase the LOI value of EP–7.5 mass% HHPCP–1 mass% nMMT sample from 26.5 to 27.5 %. The SDR test indicates that smoke suppression of HHPCP on EP is not significant. TG analysis reflects that the EP–7.5 mass% HHPCP sample and EP–7.5 mass% HHPCP–1 mass% nMMT show higher thermal stability properties with an increasing T _onset and T _max comparing with neat-EP. TG-MS result indicates that the main pyrolysis product of EP is H₂O, CO, CO₂, C₆H₆, C₆H₅OH, HOC₆H₄CH₃, and flammable hydrocarbon fragments C_xH_y. Compared with neat-EP sample, nonflammable water vapor of EP–7.5 mass% HHPCP sample increased, whereas CO₂ and the flammable hydrocarbon fragments C_xH_y and flammable gas CO decreased. TG-MS and FTIR result suggests that HHPCP decomposed first by inter-molecular dehydration, then P–N hexatomic ring of HHPCP decomposed during 470 and 560 °C, and a little no-flame gas containing nitrogen element volatilized into the gaseous phase.     

CoC2O4·2H2O在空气中的热分解动力学研究

纳米Co3O4具有尖晶石结构,Co3 占据八面体位,具有较高的晶体场稳定化能,在空气中低于800℃时十分稳定,是优良的催化材料[1]。Co3O4还可以作为高比能锂离子电池负极材料具有非常好的电化学活性,充放电容量高达960m A h·g-1。纳米Co3O4在紫外、可见及近红外区域都有良好的吸收效果,因此,在隐身技术、保温节能技术等领域具有潜在的应用前景。所以,Co3O4超细粉体的制备和应用研究具有十分重要的意义。我们合成了草酸盐先驱物制备纳米Co3O4用作隐身材料,因此对先驱物的热分解过程研究是十分必要的。热分析方法在了解先驱物热分解反应的物理…     

Thermal hazard evaluation of tert-butyl hydroperoxide mixed with four acids using calorimetric approaches

Possessing thermal instability inherently, organic peroxides have caused many severe accidents in chemical industries all over the world. tert-Butyl hydroperoxide (TBHP) is usually used as initiator or oxidant because of its strong oxidizing ability in the chemical process. In this study, the thermal hazard analysis of TBHP mixed with various acids was investigated. Differential scanning calorimetry (DSC) and vent sizing package 2 were used to figure out the thermal runaway behaviors of TBHP. Thermokinetic parameters, such as exothermic onset temperature (T ₀), maximum temperature (T _max), and enthalpy (ΔH), were obtained from thermal curves. In addition, the activation energy (E _a) and rate constant (k) were calculated by the Arrhenius equation. Therefore, the T ₀ was determined to be 91.6 °C for exothermic reaction using DSC under 4 °C min^?1 of heating rate. The E _a for exothermic reaction was calculated to be 92.38 kJ mol^?1 by DSC in this study. As far as loss prevention is concerned, thermokinetic parameters are crucial to the relevant processes in the chemical industries, particularly under process upsets.     

Synthesis and thermal decomposition of potassium peroxotitanate to K2Ti2O5

Potassium peroxotitanate was synthesized by the peroxo method. During the thermal decomposition K₂Ti₂O₅ can be obtained. The isothermal conditions for decomposition of K₂[Ti₂(O₂)₂(OH)₆]·3H₂O were determined on the base of DTA, TG and DSC results. DTA and TG curves were recorded in the temperature range 20 and 900°C at a heating rate of 10°C min^–1. The obtained intermediate compounds were characterized by means of quantitative analysis and IR spectroscopy. The mechanism of thermal decomposition of K₂[Ti₂(O₂)₂(OH)₆]·3H₂O to K₂Ti₂O₅ was studied. The optimal conditions for obtaining K₂Ti₂O₅ were determined (770°C for 10 h).     

Thermal characteristics of bitumen pyrolysis

The pyrolysis behavior of bitumen was investigated using a thermogravimetric analyzer–mass spectrometer system (TG–MS) and a differential scanning calorimeter (DSC) as well as a pyrolysis-gas chromatograph/mass spectrometer system (Py-GC/MS). TG results showed that there were three stages of weight loss during pyrolysis—less than 110, 110–380, and 380–600 °C. Using distributed activation energy model, the average activation energy of the thermal decomposition of bitumen was calculated at 79 kJ mol⁻¹. The evolved gas from the pyrolysis showed that organic species, such as alkane and alkene fragments had a peak maximum temperature of 130 and 480 °C, respectively. Benzene, toluene, and styrene released at 100 and 420 °C. Most of the inorganic compounds, such as H₂, H₂S, COS, and SO₂, released at about 380 °C while the CO₂ had the maximum temperature peaks at 400 and 540 °C, respectively. FTIR spectra were taken of the residues of the different stages, and the results showed that the C–H bond intensity decreased dramatically at 380 °C. Py-GC/MS confirmed the composition of the evolved gas. The DSC revealed the endothermic nature of the bitumen pyrolysis.