Study of ceramic pigments based on cobalt doped Y2O3–Al2O3 system

Ceramic pigments based on Y₂O₃–Al₂O₃ system doped by cobalt as a colourant agent were synthesized by solid-state reaction at temperatures up to 1,400 °C. The reactivity of initial mixtures of components was improved by the mineralizer LiF and the mechanical activation in a planetary ball mill. The temperature region of the product formation was followed by the method of thermal analysis. The effect of the synthetic method on the phase composition of the products was studied by X-ray diffraction analysis. Studied pigment-application properties of the product include the measurement of optical properties in the visible region of light and particle size distribution. The simple solid-state reaction led to the formation of turquoise samples that contain mainly blue CoAl₂O₄ spinel and next to it also YAlO₃ perovskite and Y₃Al₅O₁₂ garnet phases. The mineralizer LiF promotes the formation of yttrium aluminium double oxides of sandy-yellow to grey–brown colour hue, although the samples also contain small amount of blue CoAl spinel phase. Intensive milling process did not results in CoAl spinel phase and the samples contain yttrium aluminium perovskite and cobalt oxide. Evaluation of Kubelka–Munk absorption as a function of the pigment concentration was found that hiding is complete by adding of 5 mass% of pigment to the ceramic glaze. Resulting colour hue of all pigment applications into ceramic glaze is blue. The size of particles lies in the range of 7–26 μm.     

Thermal study of the Ce<Subscript>0.9</Subscript>Tb<Subscript>0.1</Subscript>O<Subscript>2</Subscript> pigment prepared by different synthesis

The inorganic ceramic compounds based on the CeO₂ belong into the group of high-temperature pigments. The pigments have been prepared by the classical dry process (i.e. solid-state reaction) in the temperature range from 1,300 to 1,600 °C and by the coprecipitation at the three different temperatures: 400, 600 and 1,100 °C. The principal of these pigments makes the host lattice of the CeO₂, which is doped by terbium ions. This incorporation of the doped ions leads to obtaining of the interesting dark orange colour after application into ceramic glaze. The aim of our research was to improve and optimize the synthesis conditions of these pigments. The samples were submitted to thermal analysis (TG–DTA) for determination of the temperature interval of the pigment formation and the thermal stability of pigments. The compounds were also measured from the point of view of their colouring, structure and particle size distribution.     

Synthesis and study of mixed oxide inorganic pigment from Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–ZnO–CeO<Subscript>2</Subscript> system

Novel environment-friendly yellow mixed oxide inorganic pigment from Bi₂O₃–ZnO–CeO₂ system with the composition 23 mol% Bi₂O₃, 15 mol% ZnO and 62 mol% CeO₂ was successfully synthesized by a conventional solid-state reaction method. Comprehensive analyses were carried out to characterize the develop pigment powder including simultaneous TG–DTA thermal analysis, colour properties and particle size distribution. The results demonstrated that the optimum calcination for pigment synthesis was located at a range 800–950 °C. The colour of the studied mixed oxide pigment is connected with the calcination condition. The substitution of Zn²⁺ changes the colour from orange to yellow. The colour of the obtained samples was dependent on the calcination condition and the particle size distribution. The most saturated yellow hue was obtained at the calcination temperature of 950 °C for 2 h in a furnace of pure air and after its application into organic binder in mass tone. The value C of this sample was approx. 65. The mixed oxide pigments were also evaluated from the standpoint of their particle size distribution. Bi₂Ce₂O₇ is considered to be a non-toxic compound, and the other component (Zn²⁺ ions) is also the safe element. Therefore, the present mixed oxide could be an attractive candidate as a novel environment-friendly inorganic yellow pigment.     

Study of Bi2O3 doped by rare-earth element

A series of novel environmentally inorganic pigments based on Bi₂O₃ doped by metal ion Dy³⁺ has been developed and characterized using methods of thermal analysis, X-ray powder diffraction and by reflectance spectral data. The new pigments have been synthesized from mixtures containing Bi₂O₃ and Dy₂O₃ by traditional solid-state route. The incorporation of Dy³⁺ into crystal lattice Bi₂O₃ changes the colour from yellow-orange to orange. The band gap of phases with formula Bi_2?xDy_xO₃, where x = 0.8, increases from 2.30 to 2.38 eV with growth of calcination temperature. The pigment Bi_1.2Dy_0.8O₃ was also evaluated from the standpoint of influence of milling time on the colour properties and particle size. The simultaneous TG–DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. The results confirm the positive effect of lanthanide ions into Bi₂O₃ on thermal stability of prepared phases.     

Synthesis,characterization and thermal analysis of polyaniline (PANI)/Co<Subscript>3</Subscript>O<Subscript>4</Subscript> composites

Conducting polyaniline/Cobaltosic oxide (PANI/Co₃O₄) composites were synthesized for the first time, by in situ deposition technique in the presence of hydrochloric acid (HCl) as a dopant by adding the fine grade powder (an average particle size of approximately 80 nm) of Co₃O₄ into the polymerization reaction mixture of aniline. The composites obtained were characterized by infrared spectra (IR) and X-ray diffraction (XRD). The composition and the thermal stability of the composites were investigated by TG-DTG. The results suggest that the thermal stability of the composites is higher than that of the pure PANI. The improvement in the thermal stability for the composites is attributed to the interaction between PANI and nano-Co₃O₄.     

Effects of doping on the thermal stability of spindle-shaped γ-Fe2O3 particles

Spindle-shaped α-FeOOH particles were synthesized using the chemical coprecipitation method in Fe(CO₃)_x(OH)_2(?x) suspensions system by adding metallic ions. The spindle-shaped γ-Fe₂O₃ particles were obtained by dehydration of α-FeOOH, and subsequent reduction and oxidation. Its thermal stability was investigated by differential thermal analysis (DTA). It was found that the transition temperature of γ-Fe₂O₃→α-Fe₂O₃ of samples doped with metallic ions is higher than that of the pure γ-Fe₂O₃ and increasing with increase of the size of the metallic ions, and γ-Fe₂O₃ by doping with two or more different metallic ions together has even higher thermal stability. The origin of the improved thermal stability was discussed. Additionally, the magnetic properties of γ-Fe₂O₃ were measured.     

Synthesis and Characterization of Magnetic Composites: Intercalation of Naproxen into Mg‐Al Layered Double Hydroxides Coated on Fe3O4

In this work the synthesis and characterization of a magnetic composite is described. It was prepared by deposition of Nap‐Mg‐Al‐LDH on Fe₃O₄ by a coprecipitation method. The structures of the obtained products were studied by powder X‐ray diffraction, FT‐IR spectroscopy, elemental analysis, and thermogravimetric analysis. From the X‐ray diffraction results, it was found that Fe₃O₄ was successfully distributed into the layered double hydroxide (LDH) phase. Furthermore, the increase in the basal spacing of LDHs from 0.881 nm to 2.157 nm shows that naproxen was successfully intercalated into the interlayer space. The particle size was estimated using transmission electron microscopy. Thermogravimetric studies indicate that the thermal stability of naproxen was enhanced after intercalation. Moreover, in vitro drug release experiments in phosphate buffer solution (pH = 7.4) were investigated.     

Stability and Deactivation of Au/Fe2O3 Catalysts for CO Oxidation at Ambient Temperature and Moisture

Various Au/Fe₂O₃ catalysts were prepared by the coprecipitation method, and CO oxidation was studied at ambient temperature and in the presence of water vapor in the feed. It was found that the precipitation method and the calcination temperatures have a significant effect on the catalytic performance of CO oxidation. The stability is related to the particle size of metallic gold and -Fe₂O₃ and the oxidation state of gold and the iron crystalline phase. The sintering of the gold particles, the reduction of oxide gold to metallic gold, the accumulation of carbonate, and a decrease in the specific surface area were observed during the reaction, which may contribute to the deactivation of Au/Fe₂O₃ catalysts.     

Effect of Bismuth Oxide Particles Size on the Thermal Excitation and Combustion Properties of Thermite Systems

The influence of Bi₂O₃ particles size at the sub-micron scale on the thermal excitation threshold and combustion performance of nano-thermite systems was investigated. Three formulas were designed and prepared, Al(100 nm)/Bi₂O₃(170 nm), Al(100 nm)/Bi₂O₃(370 nm) and Al(100 nm)/Bi₂O₃(740 nm). The samples were characterized and tested by SEM, XRD, and DSC techniques. Electrical ignition and combustion experiments were performed. The results showed that with the increase of the particle size of Bi₂O₃, in the case of slow linear heating, the exothermic heat decreased (1051.2 J g⁻¹, 527.3 J g⁻¹ and 243.6 J g⁻¹) and the thermal excitation threshold temperature increased (564.52 °C, 658.1 °C and 810.9 °C). Simultaneously, the state of the thermite reaction correspondingly changed to solid-solid, liquid-solid and liquid-liquid thermite reaction. In the case of rapid heating , the increase in particle size increased the excitation current (0.561A, 0.710A and 0.837A). During the combustion process, the thermite system with the smallest Bi₂O₃ particle size showed the largest combustion rate, and that with the largest particle size had the longest combustion duration.     

柠檬酸根对纳米Fe3O4颗粒的生长及性能的影响

现代诊断学的发展使得超小超顺磁性的Fe₃O₄粒子在医学领域具有重要应用价值。实验中利用某些羧酸盐对铁氧化物晶粒成长的抑制作用，在共沉淀法中引入柠檬酸根，制备出平均粒径小于5 nm的Fe₃O₄纳米分散体系。研究了不同柠檬酸根浓度对生成粒子的大小、结晶和表面吸附情况的影响。对Fe₃O₄颗粒在不同条件下的磁性与胶体稳定性进行了讨论。     

Superparamagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles Decorated Multiwalled Carbon Nanotubes: Preparation via Cyclic Microwave Approach and Their Drug Release Behavior

Superparamagnetic Fe₃O₄ nanoparticles decorated multiwalled carbon nanotubes were synthesized by cyclic microwave method and the effect of different reaction parameters on the products were also investigated. The as synthesized products were characterized by XRD, TEM, SEM, EDS, FT-IR, VSM, and Uv–Vis spectroscopy. It was observed that precursors’ concentration ratio had great effect on the particle size and decorating quality. Also the effect of the other parameters including irradiation power and time on product size and uniformity of the product were also investigated. The best products with desired particle size distribution obtained when irradiation power and reaction time were 900 W and 6 min, respectively. Aspirin and acetaminophen were applied as a model drug and the drug release behavior of the composite was investigated. It was observed that the drug discharge was highly dependent to the pH and can be tuned by applying magnetic field.     

Thermal analysis of the Bi2O3-Y2O3-ZrO2 pigments

The synthesis of new compounds based on Bi₂O₃ is investigated because they can be used as new colour inorganic pigments. Chemical compounds of the Bi_2-xY_x/2Zr_3x/₈O₃ type were synthetised. The host lattice of these pigments is Bi₂O₃ that is doped by Y³⁺ and Zr⁴⁺ ions. The incorporation of doped ions provides interesting colours and contributes to a growth of the thermal stability of these compounds. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. This paper also contains the results of the pigment characterization by X-ray powder diffraction and their colour properties.     

Thermal analysis of the Bi2O3-Er2O3-Zro2 pigments

The synthesis of new compounds based on Bi₂O₃ is investigated because they can be used as new ecological inorganic pigments. Chemical compounds of the Bi_2−xEr_x/2Zr_3x/8O₃ type were synthetized. The host lattice of these pigments is Bi₂O₃ that is doped by Er³⁺ and Zr⁴⁺ ions. The incorporation of doped ions provides interesting colours and contributes to a growth of the thermal stability of these compounds. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. This paper also contains the results of the pigment characterization by X-ray powder diffraction and their colour properties.     

Synthesis of nickel-iron spinel by non-conventional methods

Nickel-iron black ceramic pigments of (Fe_0.8Mg_0.2)(Fe_0.2Ni_0.8Cr)O₄ and (Fe_0.8Mg_0.1Zn_0.1)(Fe_0.2Ni_0.8Cr)O₄ compositions have been prepared by non conventional methods such as coprecipitation, microemulsion and polymeric gel routes (alkoxides hydrolysis-condensation), and compared with ceramic samples prepared by the solid state reaction from oxide precursors. The mineralising effect of a 2NaCl:NaF flux agent has been also analysed. Both non conventional methods and mineraliser presence increase the reactivity of the samples. The highest reactivity and the best black colour are obtained in the polymeric gel sample prepared from alkoxides; coprecipitated and microemulsion fired pigments are partially solubilised by glazes due to the small particle size exhibited, leading to brown colours.     

Thermal analysis of the (Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>1−x</Subscript>(Y<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>x</Subscript> pigments

The synthesis of new compounds based on Bi₂O₃ is investigated because they can be used as new ecological inorganic pigments. Chemical compounds of the (Bi₂O₃)_1−x(Y₂O₃)_x type were synthesized. The host lattice of these pigments is Bi₂O₃ that is doped by Y³⁺ ions. The incorporation of doped ions provides the interesting colours and contributes to a growth of the thermal stability of these compounds. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. This paper also contains the results of the pigment characterization by X-ray powder diffraction and their colour properties.     

Thermal analysis of doped Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

New environmentally inorganic pigments based on Bi₂O₃ doped by metal ions, such as Zr⁴⁺ and Dy³⁺ have been developed and characterized using the methods thermal analysis, X-ray powder diffraction, and spectral reflectance data. The compounds having formula Bi_2−x Dy _x/2Zr_3x/8O₃ (x = 0.2, 0.6, 1.0, and 1.2) were prepared by the solid state reaction. Methods of thermal analysis were used for determination of the temperature region of the pigment formation and thermal stability of compounds. The incorporation of doped ions in Bi₂O₃ changes the color from yellow to orange and also contributes to a growth of their thermal stability. This property gives a direction for coloring ceramic glazes.     

Synthesis of bismuth mixed oxide by thermal decomposition of a coprecipitate precursor

Bismuth mixed oxide powders were prepared by oxalate coprecipitation process. The thermal decomposition behaviour of the coprecipitate precursors has been followed by thermal analysis (TG-DTA) and FTIR spectroscopy. During the decomposition of the precursor, several intermediates species were detected and a mechanism of formation of mixed oxide by this method is proposed. After the thermal treatment, the precursor obtained of suggested formula Ca₃[Bi₆O₆(C₂O₄)₄(OH)₃NO₃]0.5H₂O, has led to the formation of CaBi₂O₄ at shorter reaction time than the traditional ceramic method. In order to consolidate the results, the coprecipitation in absence of oxalic precipitant under the same conditions was examined. XRD and scanning electron spectroscopy were used to study particles sizes and morphology.     

Chromium(IV) Stabilisation in New Ceramic Matrices by Coprecipitation Method: Application as Ceramic Pigments

In this paper the stabilization of Cr⁴⁺ in new ceramic matrices as willemite Zn₂SiO₄ and galium‐gadolinium garnet GGG (Gd₃Ga₅O₁₂) is studied and compared with the chromium‐sphene ceramic pigment using the traditional solid reaction and an unconventional coprecipitation method.The chromate amount etched from the powders using Cr^III and Cr^VI precursors on ceramic and coprecipitation routes are analysed in order to evaluate the environmental impact on the waste water. Cr‐willemite and codoped Ca, Cr‐GGG produces solid solutions of Cr⁴⁺ ion occupying tetrahedral and dodecahedral sites, respectively, while Cr⁴⁺ into sphene lattice occupies octahedral sites. Cr‐willemite are stable when used as ceramic pigment in habitual tile glazes but Cr‐GGG unstabilses and produces green colour associated to Cr³⁺ solved in the glaze. Coprecipitate powders are more reactive than ceramic powders but in Cr‐GGG stabilizes the metastable Ca₃Cr₂O₈ oxide. Chromate amount in washing hot water are not dependent of the chromium precursor but depends of the allowed reactivity level and the reaction media.     

铁酸钴纳米粒子:室温下点击合成亚芳基巴比妥酸衍生物的高效可磁性分离多相催化剂(英文)

A coprecipitation method was used to synthesize superparamagnetic CoFe2O4 nanoparticles without using any capping agents/surfactants. The prepared nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, a vibrating sample magnetometer (VSM), N2 adsorption and thermogravimetric/differential thermal analysis/differential thermal gravimetry techniques. The synthesized spinel CoFe2O4 nanoparticles had an average size of 2-8 nm with a high surface area (140.9 m2/g). The field-dependent magnetization, demonstrated by VSM and saturation magnetization, was found to be 1.77 emu/g. An efficient method was used for the synthesis of arylidene barbituric acid derivatives using CoFe2O4 magnetic nanoparticles as a magnetically separable and reusable catalyst in aqueous ethanol. The attractive features of this synthetic protocol were very short reaction time, high yields, high turnover frequency, simple work-up procedure, economy, a clean reaction methodology, and chemoselectivity, as well as provision of an ecofriendly and green synthesis.     

Design of Ag3PO4 for highly enhanced photocatalyst using hydroxyapatite as a source of phosphate ion

The effect of hydroxyapatite on structure, particle size, and band gap energy of silver orthophosphate (Ag₃PO₄) have been investigated. The hydroxyapatite as a source of phosphate ion was prepared using the coprecipitation of CaCl₂ and KH₂PO₄. To produce the product of Ag₃PO₄, the as-synthesized hydroxyapatite was suspended in water and quickly added to a silver nitrate solution. The obtained photocatalysts were characterized using XRD, SEM, DRS, and XPS. The high crystallinity of single phase Ag₃PO₄ was easily produced using the hydroxyapatite. Photocatalytic activities of the product were evaluated using RhB decomposition under blue light irradiation. The hydroxyapatite as a source of phosphate ion dramatically decreases the particle size and increases the absorption in the visible region. This obtained photocatalyst significantly improves the photocatalytic activity. The mechanism of reaction works in the following order: holes > superoxide radical > hydroxyl radical.