A kind of fast changing coherent structure in a turbulent boundary layer

Coherent structures of a turbulent boundary layer were investigated by hydrogen bubble method. A kind of fast changing structure was observed. That is a spot in which all the hydrogen bubbles vanish much faster than in other regions. This investigation verified that dark-spot is formed by a strong sweep from outer layer. Inside a dark-spot the local instantaneous flow speed might be four times of its neighboring high-speed streaks. Comparing with the low/high speed streaks, both dark-spot and the vortical structures around it are changing very fast. Around dark-spot intensive shear layers are formed and indications of the generation of small-scale structures could be observed. The project supported by the National Natural Science Foundation of China (No. 19672004) and the National Climbing Project     

Effects of turbulent coherent structure on plume diffusion in atmosphere boundary layer

The simulation tests of plume diffusion have been carried out in an open water channel, in which a Laser Doppler Velocitymeter, optical concentration measurement and flow visualization technology have been used. Through experiments and theoretical analyses, the effects of environmental wind field, surface roughness and discharge condition of elevated source on plume diffusion have been investigated. The plume diffusion mechanism has been elucidated reasonably, based on the turbulent coherent structure theory.     

A theoretical model of the coherent structure in the wall region of a turbulent boundary layer

In this paper,the formation of the coherent structures in the wall region of aturbulent boundary layer was studied,using the nonlinear theory of the hydrodynamicstability.The spanwise and streamwise wavelengths of the most amplified unstablewave obtained by this study were found in good agreement with the experiments,whichmakes the distinct feature of this study in the present paper,as the basis of thestability analysis,a more rational velocity profile has been used,which is different fromthat of the turbulent mean flow.And also,the new nonlinear theory was used.Theresult is useful in understanding of the quasi-periodicity of the coherent structure in theturbulent boundary layer.     

ON THE MECHANISM OF TURBULENT COHERENT STRUCTURE(II)──A PHYSICAL MODEL OF COHERENT STRUCTURE FOR THE ROUGH BOUNDARY LAYER

In this paper, the differences of turbulent coherent structure between the smooth and rough boundary layers are analysed. Based on the discussing the transient properties from the smooth wall to the rough wall, the physical model of coherent structure for the rough boundary layer are established. The width of slowly-moving turbulent spot and the bursting time are obtained, which are in agreement with experimental results.The project supported by the National Nature Science Foundation of China     

Tomographic PIV investigation of coherent structures in a turbulent boundary layer flow

Tomographic particle image velocimetry was used to quantitatively visualize the three-dimensional coherent structures in the logarithmic region of the turbulent boundary layer in a water tunnel.The Reynolds number based on momentum thickness is Reθ = 2 460.The instantaneous velocity fields give evidence of hairpin vortices aligned in the streamwise direction forming very long zones of low speed fluid,which is flanked on either side by highspeed ones.Statistical support for the existence of hairpins is given by conditional averaged eddy within an increasing spanwise width as the distance from the wall increases,and the main vortex characteristic in different wall-normal regions can be reflected by comparing the proportion of ejection and its contribution to Reynolds stress with that of sweep event.The pre-multiplied power spectra and two-point correlations indicate the presence of large-scale motions in the boundary layer,which are consistent with what have been termed very large scale motions(VLSMs).The three dimen-sional spatial correlations of three components of velocity further indicate that the elongated low-speed and highspeed regions will be accompanied by a counter-rotating roll modes,as the statistical imprint of hairpin packet structures,all of which together make up the characteristic of coherent structures in the logarithmic region of the turbulent boundary layer(TBL).     

Multi-scale coherent structures in turbulent boundary layer detected by locally averaged velocity structure functions

Introduction Inearlyperiodofstudyofturbulentflow,itwasdeemedrandomanddisorderedmotionsof fluidparticles,sothecharacteristicsofturbulencewerestudiedbystatisticsaveragemethod. Kolmogorov[1]analyzedtherelativemotionoffluidparticlesinfullydeveloped(Reynolds numbertrendstoinfinity)isotropicandhomogeneousturbulentflow,onbasisofrandomfield theory,andpresentedtheconceptofstructurefunctions,whichdescribedtherelativevelocityof twofluidparticlesindistanceofl,toresearchthelawbetweenthemulti_orderstatistic…     

The structure of the turbulent boundary layer over a mobile and deformable boundary

The structure of the velocity field above a propagating water wave of fixed frequency was investigated in order to evaluate the transport of wind momentum to water waves and the influence of a mobile and deformable boundary on the bursting cycle. The vertical and horizontal velocities were measured in a transformed Eulerian wave-following frame of reference with the aid of a cross hot film, in a wind-wave research facility at Stanford University.The mean velocity profiles have a log-linear form with a wake free-stream characteristic. The wave-coherent motion in the free-stream is irrotational; in the boundary layer, it has a strong shear behavior related to the wave-associated stress. The wave-induced velocity field and the wave-perturbed turbulence depend strongly on the ratio of the wave-speed to the mean free-stream velocity, c/U ₀.The presence of the propagating waves affects the bursting cycle, making the contribution of sweeps and ejections almost equal and dependent on the ratio c/U ₀. The magnitudes of the contribution of the bursting events are generally enhanced by the presence of water waves. The time interval between ejections or sweeps does not scale with either the inner and/or outer flow variables.This paper was presented at the Ninth Symposium on Turbulence, University of Missouri-Rolla, October 1–3, 1984     

On the structure of a turbulent spot in a heated laminar boundary layer

An artificially generated turbulent spot was investigated experimentally in a heated boundary layer using a rake of mini-thermocouples. Simultaneous temperature traces were used to determine the spot's leading and trailing edge characteristics. The measurements on the centerline of the plate at a constant velocity and variable streamwise positions provided a Re _x range of 2.45–12.6 x 10⁵. At one axial station the free stream velocity was varied and off-axis measurements were obtained.The shape of the interface between the spot and the surrounding laminar flow was described by conventional and conditional histograms. The length of the spot's leading edge (i.e. the overhang) increased linearly with the downstream distance. Off-axis, the length of the overhang decreased slightly towards the wing tips but became larger with respect to the spot's streamwise extent. The trailing edge changed less significantly in the downstream direction.It was shown that when two spots are generated such that the leading edge of the upstream spot is in the calmed region of the downstream spot, the celerity of the upstream spot is decreased and the spots ultimately merge.     

Kinematics of a turbulent boundary layer

In the article an attempt is made, within the framework of the Navier-Stokes equations, to describe the field of the instantaneous velocities of a liquid in the region of a turbulent flow near the wall. It is assumed that the velocities of the liquid are determined by the field of the eddies arising in regions of ejections under the action of pressure pulses in the region near the wall.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 34–40, September–October, 1973.     

A mechanism for excitation of coherent structures in wall region of a turbulent boundary layer

Introduction Themechanismforthegenerationofcoherentstructuresinthewallregionofaturbulent boundarylayerhasalwaysbeeninconcernandinvestigated.AccordingtoTsujimotoand Miyake[1],thecharacteristicsofturbulenceinthewallregionweremainlydeterminedbythe generationandevolutionofcoherentstructures,notbythesmall_scaleturbulence.However, excitationsfromregionofy >60werefoundtobenecessary,otherwisethewallregionwould degeneratetolaminarflow.Therefore,theinvestigationofthemechanismthathowcoherent structuresi…     

The structure of the supersonic turbulent boundary layer in its interaction with a shock wave

An experimental study is made of the turbulent boundary layer in its interaction with a shock wave, the purpose being to clarify questions connected with the increase in the fullness of the velocity profiles. New systematic data are obtained on the development of the boundary layer, and its structure and asymptotic behavior beyond the interaction region. These results are for axisymmetric flow in the range of Mach numbers M=2–4 and angles of rotation of the flow 10–25°. Conditions of developed separation are included. Extensive information about the general properties of flows with separation has been obtained in a number of studies. A survey of these may be found, for example, in [1, 2]. Certain questions about the separation and reattachment of the boundary layer are clarified. The dimensions of the separation region are determined and its structure studied in detail for various shapes of the surface around which the flow takes place. Nevertheless it has not yet proved possible to reach a complete understanding of this complex phenomenon. Usually plane models have been used for the investigations, but in this case it is evidently impossible to exclude completely the influence of end effects on the flow in the interaction zone. Therefore it is preferable to study such flows in axisymmetric models; this considerably eases the task of analyzing and interpreting the results.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 75–82, September–October, 1985.     

Large-eddy simulation of a turbulent boundary layer with blowing

The modifications of a turbulent boundary layer induced by blowing through a porous plate were investigated using large-eddy simulation. The Reynolds number (based on the length of the plate) of the main flow was about 850000. Large-eddy simulations of such a boundary layer needs a turbulent inflow condition. After a review of available turbulent inflow, we describe in details the condition we developed, which consisted of recycling the velocity fluctuations. Then we show the necessity for this inflow to be non-stationary and to be three dimensional with respect to the mass conservation equation. If these properties are not achieved, we found that the velocity fluctuations do not grow as expected along the domain. Finally, the results of simulations of the boundary layer submitted to blowing are compared with experimental measurements. The good agreement obtained validate our turbulent inflow conditions and also the blowing model used. PACS 47.27.Eq, 47.27.Te, 44.20.+b     

Wake layer in a thermal turbulent boundary layer with pressure gradient

The open equations of thermal turbulent boundary layer subjected to pressure gradient have been analysed by method of matched asymptotic expansions at large Reynolds number. The flow is divided into outer wake layer and inner wall layer. The asymptotic expansions are matched by Millikan-Kolmogorov hypothesis. The temperature profile in overlap region yields composite law which reduce to log. law for moderate pressure gradient and inverse half power law for strong adverse pressure gradient. In case of a shallow thermal wake, the matching result of outer wake layer reduces to composite temperature defect law, which is more general than the classical log. law. The comparison of data for thermal boundary layer with strong adverse pressure gradient is also considered. Received on 26 May 1998     

Numerical simulation of quasi-streamwise hairpin-like vortex generation in turbulent boundary layer

A mechanism for generation of near wall quasi-streamwise hairpin-like vortex （QHV） and secondary quasi-streamwise vortices （SQV） is presented. The conceptual model of resonant triad in the theory of hydrodynamic instability and direct numerical simulation of a turbulent boundary layer were applied to reveal the formation of QHV and SQV. The generation procedures and the characteristics of the vortex structures are obtained, which share some similarities with previous numerical simulations. The research using resonant triad conceptual model and numerical simulation provides a possibility for investigating and controling the vortex structures, which play a dominant role in the evolution of coherent structures in the near-wall region.     

Effects of the slip wall on the drag and coherent structures of turbulent boundary layer

Acta Mechanica Sinica - A comparative experiment by time-resolved particle image velocimetry (TRPIV) of the turbulent boundary layer (TBL) over a smooth surface and an anisotropy superhydrophobic...     

Wall pressure and its relation to turbulent structure of a boundary layer

Wall pressure fluctuations were measured in relation to the structure of coherent motions of a turbulent boundary layer. Their high and low frequency parts were found to be related with the large scale motions of the outer layer and the bursts in the wall region respectively. Based on the experimental results, a structure model of the coherent motions is presented.This paper was presented at the Ninth symposium on turbulence, University of Missouri-Rolla, October 1–3, 1984     

Modification of near-wall turbulence structure in a shear-driven three-dimensional turbulent boundary layer

 Most high Reynolds number flows of engineering interest are three-dimensional in nature. Key features of three-dimensional turbulent boundary layers (3DTBLs) include: non-colateral shear stress and strain rate vectors, and decreasing ratio of the shear stresses to the turbulent kinetic energy with increasing three-dimensionality. These are indicators that the skewing has a significant effect on the structure of turbulence. In order to further investigate the flow physics and turbulence structure of these complex flows, an innovative method for generating a planar shear-driven 3DTBL was developed. A specialized facility incorporating a relatively simple geometry and allowing for varying strengths of crossflow was constructed to facilitate studies where the skewing is decoupled from the confounding effects of streamwise pressure gradient and curvature. On-line planar particle image velocimetry (PIV) measurements and flow visualization results indicate that the experimental configuration generates the desired complex flow, which exhibits typical characteristics associated with 3DTBLs. Furthermore, spanwise shear results in modification of the near-wall turbulence structure. Analysis of near-wall flow visualization photographs revealed a reduction of mean streak length with increasing spanwise shear, while streak spacing remained relatively constant. In the most strongly sheared case, where the belt velocity is twice that of the freestream velocity, the mean streak length was reduced by approximately 50%. Received: 28 October 1997/Accepted: 4 February 1998     

Near-wake flow structure downwind of a wind turbine in a turbulent boundary layer

Wind turbines operate in the surface layer of the atmospheric boundary layer, where they are subjected to strong wind shear and relatively high turbulence levels. These incoming boundary layer flow characteristics are expected to affect the structure of wind turbine wakes. The near-wake region is characterized by a complex coupled vortex system (including helicoidal tip vortices), unsteadiness and strong turbulence heterogeneity. Limited information about the spatial distribution of turbulence in the near wake, the vortex behavior and their influence on the downwind development of the far wake hinders our capability to predict wind turbine power production and fatigue loads in wind farms. This calls for a better understanding of the spatial distribution of the 3D flow and coherent turbulence structures in the near wake. Systematic wind-tunnel experiments were designed and carried out to characterize the structure of the near-wake flow downwind of a model wind turbine placed in a neutral boundary layer flow. A horizontal-axis, three-blade wind turbine model, with a rotor diameter of 13 cm and the hub height at 10.5 cm, occupied the lowest one-third of the boundary layer. High-resolution particle image velocimetry (PIV) was used to measure velocities in multiple vertical stream-wise planes (x–z) and vertical span-wise planes (y–z). In particular, we identified localized regions of strong vorticity and swirling strength, which are the signature of helicoidal tip vortices. These vortices are most pronounced at the top-tip level and persist up to a distance of two to three rotor diameters downwind. The measurements also reveal strong flow rotation and a highly non-axisymmetric distribution of the mean flow and turbulence structure in the near wake. The results provide new insight into the physical mechanisms that govern the development of the near wake of a wind turbine immersed in a neutral boundary layer. They also serve as important data for the development and validation of numerical models.