Drug delivery system for the treatment of endometrial carcinoma

It has been elaborated a polymer system containing medroxyprogesterone acetate (MPA), which is inserted by physicians into the womb in order to release the hormone inside only. The device has a shape of thin rod of diameter of 4 mm and length of 30 mm. It contains about 350 mg of MPA trapped in poly(ethylene oxide) matrix. The walls of the rod are covered with a few layers of latex, and the final product undergoes radiation sterilization. The rate of release of MPA to the physiological solution with respect to number of latex layers has been monitored by UV spectroscopy at 240 nm. The results of experiments in vitro have been compared to those obtained in vivo.     

Resonance light scattering technique used for biochemical and pharmaceutical analysis

By coupling and scanning simultaneously excitation and the emission monochromators of a common spectrofluorometer, enhanced resonance light scattering (RLS) signals could be obtained. The enhanced RLS signals could be used for designating bio-assemblies, aggregation species, and analytical purposes. Herein, we review the reports since the year of 2000 concerning the biochemical and pharmaceutical analysis with the RLS measurements, and discuss the possible developments of this technique.     

Development of a new hybrid technique for rapid speciation analysis by directly interfacing a microfluidic chip-based capillary electrophoresis system to atomic fluorescence spectrometry

This paper represents the first study on direct interfacing of microfluidic chip-based capillary electrophoresis (chip-CE) to a sensitive and selective detector, atomic fluorescence spectrometry (AFS) for rapid speciation analysis. A volatile species generation technique was employed to convert the analytes from the chip-CE effluent into their respective volatile species. To facilitate the chip-CE effluent delivery and to provide the necessary medium for subsequent volatile species generation, diluted HCl solution was introduced on the chip as the makeup solution. The chip-CE-AFS interface was constructed on the basis of a concentric "tube-in-tube" design for introducing a KBH4 solution around the chip effluent as sheath flow and reductant for volatile species generation as well. The generated volatile species resulting from the reaction of the chip-CE effluent and the sheath flow were separated from the reaction mixture in a gas-liquid separator and swept into the AFS atomizer by an argon flow for AFS determination. Inorganic mercury (Hg(II)) and methylmercury (MeHg(I)) were chosen as the targets to demonstrate the performance of the present technique. Both mercury species were separated as their cysteine complexes within 64 s. The precision (relative standard deviation, RSD, n = 5) of migration time, peak area, and peak height for 2 mg.L(-1) Hg(II) and 4 mg.L(-1) MeHg(I) (as Hg) ranged from 0.7 to 0.9%, 2.1 to 2.9%, and 1.5 to 1.8%, respectively. The detection limit was 53 and 161 microg.L(-1) (as Hg) for Hg(II) and MeHg(I), respectively. The recoveries of the spikes of mercury species in four locally collected water samples ranged from 92 to 108%.     

Analytical methods and monitoring system for E-beam flue gas treatment process

The results of reliable and precise measurement of gas composition in different key points of e-beam installation are necessary for its proper operation and control. Only the composition of flue gas coming into installation is adequate to composition of flue gas emitted from coal-fired boiler. At other points of e-b installation the gas composition is strongly modified by process conditions therefore specific measuring system (sampling and conditioning system and set of gas analyzers) for its determination are required. In the paper system for gas composition measurement at inlet and outlet of e-b installation are described. Process parameters are continuously monitoring by CEM system and occasionally by the grab sample system. Both system have been tested at pilot plant at EPS Kaw czyn.     

Two-dimensional separation system of coupling capillary liquid chromatography to capillary electrophoresis for analysis of Escherichia coli metabolites

A two-dimensional (2-D) separation system of coupling chromatography to electrophoresis was developed for profiling Escherichia coli metabolites. Capillary liquid chromatography (LC) with a monolithic silica-octadecyl silica column (500 x 0.2 mm ID) was used as the first dimension, from which the effluent fractions were further analyzed by capillary electrophoresis (CE) acting as the second dimension. Field-enhanced stacking was selectively employed as a concentration strategy to interface the two dimensions, which proved to be beneficial for the detection of metabolites. An artificial sample containing 118 standards, some of which lack chromophores or have weak UV absorbance, was used to optimize the 2-D separation system. Under the optimum conditions, 63 components in the artificial sample having absorbance at 254 nm could be well resolved and detected. The utility of the system was demonstrated by comprehensive analysis of E. coli metabolites. Comparing with the previous 2-D separation system we published in Anal. Chem. 2004, 76, 1419-1428, using a longer monolithic column in the first dimension improved the separation efficiency and offered the possibility of increasing the injection volume without compromising the separation efficiency. In the second dimension, field-enhanced stacking was used to improve the concentration sensitivity of the metabolites, and more metabolites in E. coli cell extract were detected and identified using the developed 2-D separation system. In addition, preliminary investigation for future CE-mass spectrometry coupling was also made in the study by using volatile buffers in the capillary LC and CE techniques.     

Evaluation of a multiarray system for pharmaceutical analysis by microemulsion electrokinetic chromatography

A multiplexed capillary electrophoresis (CE) system equipped with 96 channels was evaluated for high-throughput screening in drug discovery by microemulsion electrokinetic chromatography (MEEKC). Method transfer from a single channel to a multichannel CE system is described. Loss of efficiency and reduced migration times could be elucidated to the poor efficacy in Joule heat dissipation by forced air cooling in the multiarray system compared to liquid cooling in the single channel instrument. On the other hand, only 48 channels could actually be used because of the maximum total current of 3 mA. Precision data remained below 8% and 9% for migration times and peak areas, respectively. Some UV-detector cross-talk interference between neighboring capillary channels was noted. Impurities at 0.5% compared to the main peak (100%) could be detected with the multiplexed system which is 10 times lower compared to the single capillary system. Higher efficiency and improved figures of merit (absolute sensitivity and no cross-talk interferences) were obtained by using an array of only 24 capillaries.     

Advanced automation of a flow injection analysis system for quality control of olive oil through the use of a distributed expert system

A new methodology—based on the combination of flow injection analysis and a distributed expert system—is proposed for the on-line chemical quality control of olive oil. This knowledge-based system is in charge of carrying out the flow injection determination of total acidity, peroxide value, and UV spectrophotometric measurements (K₂₃₂ and K₂₇₀), according to EU legislation. On the other hand, the expert system, apart from supervising the correct functioning of the system (devices, clogging, analysis frequency, and so on), performs the definite classification of the analyzed oil by evaluating the oil quality from the values yielded, according to previously established specifications. Satisfactory results have been obtained in the application of this approach to different samples of Spanish olive oil along the storage process. The distributed expert system also allows for the remote control of the analysis process owing to the interconnection of the different nodes by means of a communication network.     

Downscaling a multicommuted flow injection analysis system for the photometric determination of iodate in table salt

In this work a downscaled multicommuted flow injection analysis setup for photometric determination is described. The setup consists of a flow system module and a LED based photometer, with a total internal volume of about 170 μL. The system was tested by developing an analytical procedure for the photometric determination of iodate in table salt using N,N-diethyl-henylenediamine (DPD) as the chromogenic reagent. Accuracy was accessed by applying the paired t-test between results obtained using the proposed procedure and a reference method, and no significant difference at the 95% confidence level was observed. Other profitable features, such as a low reagent consumption of 7.3 μg DPD per determination; a linear response ranging from 0.1 up to 3.0 m IO₃⁻, a relative standard deviation of 0.9% (n = 11) for samples containing 0.5 m IO₃⁻, a detection limit of 17 μg L⁻¹ IO₃⁻, a sampling throughput of 117 determination per hour, and a waste generation 600 μL per determination, were also achieved.     

Microfluidics and electrochemistry: an emerging tandem for next-generation analytical microsystems

Microfluidic and electrochemical technologies have been at the forefront of the development of emerging analytical microsystems. Microfluidics and electrochemistry show a synergistic relationship, empowering their inherent features. Thus, integration of microfluidics and electrochemical (bio)sensors is envisioned as a powerful tandem for boosting the next generation of lab-on-a-chip platforms, including point-of-care and point-of-need systems. In this review, a general overview of the advantages, drawbacks, and gaps as well as remaining challenges and future trends of coupling microfluidics and electrochemical cells is presented. Special attention is given to the manufacturing and scale-up of the integrated devices and all those aspects that can push on the development of true lab-on-a-chip platforms for reaching the industrial domain and actual commercialization.