An NBD-based Sensitive and Selective Fluorescent Sensor for Copper(II) Ion

A new 7-nitrobenz-2-oxa-1,3-diazole (NBD) derived fluorescent probe (1) exhibiting high selectivity for Cu²⁺ detection, produced significant fluorescence quenching in the presence of Cu²⁺ ion, while the metal ions Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺ and Zn²⁺ produced only minor changes in fluorescence. The apparent association constant (K _a) for Cu²⁺ binding in chemosensor 1 was found to be 1.22 × 10³ M⁻¹. The maximum fluorescence quenching activity caused by Cu²⁺ binding to 1 was observed over the pH range 6–10.     

A Fe<Superscript>3+</Superscript>/Hg<Superscript>2+</Superscript>-Selective Anthracene-Based Fluorescent PET Sensor with Tridentate Ionophore of Amide/β-Amino Alcohol

A new anthracene-based fluorescent PET sensor 1 with a tridentate ionophore of amide/β-amino alcohol displays very good selectivity and sensitivity for Fe³⁺ (K _a = 1.6 × 10³ M⁻¹) and Hg²⁺ (K _a = 2.1 × 10³ M⁻¹) in CH₃CN–H₂O (3:7, v/v) with detection limit of 1 μM. More fluorescence enhancement was observed when 1 selectively detected Fe³⁺ or Hg²⁺ in CH₃CN and its detection limit was up to 0.03 μM.     

A Pyrene-based Highly Selective Turn-on Fluorescent Chemosensor for Iron(III) Ions and its Application in Living Cell Imaging

A new pyrene-based chemosensor (1) exhibits excellent selectivity for Fe³⁺ ions over a wide range of tested metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe²⁺, Hg²⁺, K⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺. The binding of Fe³⁺ to chemosensor 1 produces an emission band at 507 nm due to the formation of a Py-Py* excimer that is induced by Fe³⁺-binding. The binding ratio of 1-Fe³⁺ was determined to be 1:1 from a Job plot. The association constant of 1-Fe³⁺ complexes was found to be 1.27?×?10⁴ M^?1 from a Benesi-Hildebrand plot. In addition, fluorescence microscopy experiments show that 1 can be used as a fluorescent probe for detecting Fe³⁺ in living cells.     

A New Highly Sensitive and Selective Fluorescent Cadmium Sensor

Condensation product (L) of salicylaldehyde and semicarbazide behaves as a fluorescent sensor for Cd²⁺ ion, in 1:1 DMSO:H₂O, over Mn²⁺, Fe²⁺, Ni²⁺, Co²⁺, Cu²⁺, Pb²⁺ and Hg²⁺ ions. The emission peak of L at λ_max = 520 nm, on excitation with 420 nm wavelength photons, showed an enhancement in intensity of ca 60-fold when interacted with Cd²⁺ ion. The intensity was however found to remain unaltered when interacted with metal ions—Mn²⁺, Fe²⁺, Ni²⁺, Co²⁺, Cu²⁺, Pb²⁺ and Hg²⁺. The intensity increases by approximately 20 fold on interaction with Zn²⁺ ion. The increase in the fluorescent peak can be explained on the basis of photo induced electron transfer (PET) mechanism. A 1:1 complexation between Cd²⁺ and L with log β = 4.25 has been proved.     

A New Fluorescent Chemosensor Detecting Co<Superscript>2+</Superscript> and K<Superscript>+</Superscript> in DMF Buffered Solution

A new fluorescent chemosensor 2-(2-thiophene)imidazo [4,5,f]-1,10-phenanthroline (L) was prepared and characterized. By adding univalent or divalent metal ions such as Na⁺, K⁺, Mg²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Zn²⁺, Cd²⁺ and Hg²⁺ ions into the solution of L in DMF under buffered conditions with the working pH ranging from 7.0 to 8.0, we found that L could be used to detect K⁺ ratiometricly and it could also be applied to sense Co²⁺ with the phenomenon of fluorescence quenching of L. While the response behavior of L was not discernibly affected by other examined metal ions.     

A Highly Selective Turn on Fluorescence Sensor for Hg2+ Based on Rhodamine Derivative

A novel fluorescent rhodamine based chemosensor (E)-3′,6′-bis(diethylamino)-2-((2-(pyridin-2-ylmethoxy)benzylidene)amino)spiro[isoindoline-1,9′-xanthen]-3-one, RSP, had been successfully developed and well characterized by NMR, FT-IR and Mass spectroscopy. The chemosensor exhibits high selectivity for Hg²⁺ over other ions (Ag⁺, Pb²⁺, Cu²⁺, Ni²⁺, Fe³⁺, Co²⁺, Zn²⁺ and Cd²⁺) with fluorescence enhancement in ethanol solution. More over the detection limit of the sensor is in the 10^?6 M level. The binding ratio of RSP-Hg²⁺ complex was determined to be 1:1 according to the Job plot. Test strips based on RSP were fabricated, which showed the application of the sensor for detection of mercuric ions in water by naked eyes.     

A Novel Hg<Superscript>2+</Superscript> Selective Ratiometric Fluorescent Chemodosimeter Based on an Intramolecular FRET Mechanism

A irreversible Hg²⁺ selective ratiometric fluorescence probe FR, a fluorescein fluorophore linked to a rhodamine B hydrazide by a thiourea spacer, was designed and synthesized. The developed probe FR exhibited great ratiometric fluorescence enhancement and remarkable yellow-magenta color change toward Hg²⁺ with excellent selectivity in aqueous acetone solution, and the ratiometric fluorescence response to Hg²⁺ was not interfered by other metal cations including Fe³⁺, Co²⁺, Ni²⁺, Cr³⁺, Zn²⁺, Pb²⁺, Cd²⁺, Ca²⁺, Mg²⁺, Ba²⁺ and Mn²⁺. The linear range and the detection limit of this supposed ratiometric fluorescence method for Hg²⁺ were 0.0–10.0 × 10⁻⁶ and 5 × 10⁻⁸ M, respectively.     

Selective extraction of palladium(II) using hydrazone ligand: A novel fluorescent sensor

The acyclic tridentate blue luminescent ligand (λ_ex=300 nm, λ_em=415 nm) quinoline-2-carboxaldehyde 2-pyridylhydrazone, HL, 1, was recognized as a new fluorescent chemosensor for Pd²⁺. In alkaline methanol complete fluorescent quenching was observed in the presence of 2 equivalents of Pd²⁺ that was further reflected in the solid phase fluorescence microscopic study.Ligand formed 1:1 complexes with Ni²⁺, Cu²⁺, Zn²⁺, Pd²⁺ and 1:2 complexes with Co²⁺, Fe²⁺ as obtained from Job's plot of continuous variation. The binding constants of different metal complexes (Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Pd²⁺) were estimated by fluorescence titrations. The ligand can selectively extract significant amount of Pd²⁺ from the aqueous mixture of metal ions, and the extraction efficiency was increased from 80% to 95% with increase in the molar ratio of HL, 1, to Pd²⁺ from 1 to 3. No significant interference was observed up to 2-fold excess addition of Cu²⁺ and Zn²⁺ and 100-fold excess addition of Co²⁺, Fe²⁺ and Ni²⁺over the Pd²⁺ ion concentration (1.0×10⁻³ M).     

Measurement and simulation of specific heat for metastable liquid Ni80Fe10Cu10 alloy

The specific heat of undercooled liquid Ni₈₀Fe₁₀Cu₁₀ alloy was experimentally measured by electromagnetic levitation drop calorimeter, and also numerically simulated by the molecular dynamics method. The achieved maximum undercooling is up to 252 K (0.15 T _L) in the experiments, and the measured result is 41.67 J mol⁻¹ K⁻¹. The simulation provides calculated data within 0∼702 K undercooling range, which is much broader than the experimental regime. The simulated value is 37.02 J mol⁻¹ K⁻¹. Although there exists a difference of 4.65 J mol⁻¹ K⁻¹ between them, the result is quite acceptable for simulation. Furthermore, the liquid structure of undercooled Ni₈₀Fe₁₀Cu₁₀ alloy is studied in terms of the total and partial pair distribution functions, which display that the ordered degree of atoms enhances from a normal liquid to metastable state.     

Fluorescence Sensors for Selective Detection of Hg2+ Ion Using a Water-Soluble Poly(vinyl alcohol) Bearing Rhodamine B Moieties

The novel water-soluble poly(vinyl alcohol) with pendant rhodamine B moiety as colorimetric and fluorescene chemosensor for Hg²⁺ ions was prepared by grafting poly(vinyl alcohol) using rhodamine B hydrazide and hexamethylenediisocyanate as fluorescent dye and coupling agent, respectively. Because of their good water-solubility, the polymers binding rhodamine B can be used as chemosensors in aqueous media. With the addition of Hg²⁺ ions into the aqueous solution, visual color changes and fluorescence enhancements were detected. In addition, we also noticed that other metal ions such as Ag⁺, Cd²⁺, Co²⁺, Cu²⁺, K⁺, Mg²⁺, Ba²⁺, Fe²⁺, Ni²⁺, Pb²⁺, Cr³⁺, Fe³⁺ and Zn²⁺ cannot induce obvious changes to the fluorescence spectra of the polymer chemosensors. The combination of water solubility and positive fluorescence response as well as color change are hence particularly promising for the practical utility of the sensors.     

Synthesis, characterization, DNA binding and cleavage studies of mixed-ligand Cu(II) complexes of 2,6-bis(benzimidazol-2-yl)pyridine

Four novel copper(II) complexes of the composition [CuLX] where L = 2,6-bis(benzimidazole-2yl)pyridine, X = dipyridophenazine (L₁), 1,10-phenanthroline (L₂), hydroxyproline (L₃) and 2,6-pyridine dicarboxylic acid (L₄) were synthesized and characterized by using elemental analysis, FT-IR, UV–vis, ESI-MS, molar conductance and magnetic susceptibility measurements. The complexes [CuLL₁](NO₃)₂ [1], [CuLL₂](NO₃)₂ [2], [CuLL₃](NO₃) [3] and [CuLL₄] (NO₃) [4] are stable at room temperature. In DMSO the complexes [1] and [2] are 1:2 electrolytes, [3] and [4] are 1:1 electrolytes. Based on elemental and spectral studies five coordinated geometry is assigned to all the four complexes. The interaction of four copper ion complexes with calf thymus DNA were carried out by UV–vis titrations, fluorescence spectroscopy, thermal melting and viscosity measurements .The binding constant (K_b) of the above four metal complexes were determined as 5.43 × 10⁴ M_,⁻¹ 2.56 × 10⁴ M⁻¹, 1.21 × 10⁴ M⁻¹ and 1.57 × 10⁴ M⁻¹ respectively. Quenching studies of the four complexes indicates that these complexes strongly bind to DNA, out of all complex 1 is binding more strongly. Viscosity measurements indicate the binding mode of complexes with CT DNA by intercalation through groove. Thermal melting studies also support intercalative binding. The nuclease activity of the above metal complexes shows that 1, 2 and 3 complexes cleave DNA through redox chemistry.     

A Coumarin-Based Fluorescent Chemosensor for Zn<Superscript>2+</Superscript> in Aqueous Ethanol Media

A coumarin-based fluorescent chemosensor 1 for Zn²⁺ was designed and synthesized. Compound 1 exhibits lower background fluorescence due to intramolecular photoinduced electron transfer. However, upon mixing with Zn²⁺ in 30% (v/v) aqueous ethanol, a “turn-on” fluorescence emission is observed. The fluorescence emission increases linearly with Zn²⁺ concentration in the range 0.5–10 μmol L⁻¹ with a detection limit of 0.29 μmol L⁻¹. No remarkable emission enhancement was, however, observed for other metal ions. The proposed chemosensor was applied to the determination of Zn²⁺ in water samples with satisfactory results.     

A New Fluorescent “Turn-Off” Coumarin-Based Chemosensor: Synthesis,Structure and Cu-Selective Fluorescent Sensing in Water Samples

We report the synthesis and characterization two coumarin-based fluorescence probes, N′-{[7-(diethylamino)-2-oxo-2H-chromen-3-yl]carbonyl}pyridine-3-carbohydrazide (3) and N′-benzoyl-7-(diethylamino)-2-oxo-2H-chromene-3-carbohydrazide (4), proposed as a novel fluorescent chemosensor. The two probes designed showed an instant turn-off fluorescence response to Cu²⁺ over other metal ions in ethanol-water mixture based on intramolecular charge transfer (ICT). It was found that pyridine-analogue coumarin is highly selective and sensitive sensor for Cu²⁺. The 3 sensor coordinates Cu²⁺ in 1:1 stoichiometry with a binding constant, K_a = 5.22 M^?1 and the detection limit was calculated 1.97 × 10^?9 M.     

A Highly Selective and Sensitive Fluorescent Chemosensor for Aluminum Ions Based on Schiff Base

An efficient “off–on” type fluorescent chemosensor, (E)-N′-(4-(diethylamino)-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H ₂ L), based on Schiff base for the determination of Al³⁺ has been designed, synthesized, and evaluated. Upon treated with Al³⁺, the fluorescence of H ₂ L was enhanced 45-fold due to the chelation-enhanced fluorescence (CHEF) effect based on the formation of a 1:1 complex between the chemosensor and Al³⁺. Other metal ions, such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Cu²⁺, Ga³⁺, Zn²⁺, Cr³⁺, Cd²⁺, Ag⁺, Fe³⁺, In³⁺, Mn²⁺, Pb²⁺, Co²⁺, and Ni²⁺ had little effect on the fluorescence. The results demonstrate that the chemosensor H ₂ L has stronger affinity with Al³⁺ than other metal ions. The detection limit of H ₂ L for sensing Al³⁺ is 3.60 × 10^?6 M in EtOH–H₂O (3:7, v/v) solution. And the recognizing behavior has been investigated both experimentally and computationally.     

Interaction between 1-[p-(dimethylamino) benzoyl]-4′-phenyl-semicarbazide and Cu

A new compound, 1-[p-(dimethylamino)benzoyl]-4′-phenyl-semicarbazide (1) was synthesized and showed highly selective response to Cu²⁺ over other metal ions such as Pb²⁺, Mg²⁺, Fe²⁺, Co²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Ca²⁺, Ag⁺, Na⁺, K⁺, and Li⁺. The control compound, 1-[p-(dimethylamino)benzoyl]-4-phenyl-thiosemicarbazide (2), showed different fluorescence spectral response to Cu²⁺. A 1:1 complex between Cu²⁺ and 1 was formed while 1:1 and 1:2 complexes between Cu²⁺ and 2 were formed. The binding model between the receptor (1 or 2) and Cu²⁺ was supported by IR spectra, mass spectra, and computation model. 1 possessed higher selectivity towards Cu²⁺ compared with 2 owing to the difference of complexation ability between urea and thiourea groups.     

Rhod-5N as a Fluorescent Molecular Sensor of Cadmium(II) Ion

The photophysical and complexing properties of Rhod-5N (commercially available) in MOPS buffer are reported. This fluorescent molecular sensor consists of a BAPTA chelating moiety bound to a rhodamine fluorophore. Its fluorescence quantum yield is low and a drastic enhancement of fluorescence intensity upon cation binding was observed. Special attention was paid to the complexation with Cd²⁺, a well known toxic metal ion. Possible interference with other metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Zn²⁺, Pb²⁺) was examined. Rhod-5N was found to be highly selective of Cd²⁺ over those interfering cations except Pb²⁺. The limit of detection is 3.1 μg l⁻¹.     

Oxygen-dependent Oxidation of Fe(II) to Fe(III) and Interaction of Fe(III) with Bovine Serum Albumin, Leading to a Hysteretic Effect on the Fluorescence of Bovine Serum Albumin

The serum albumin is the most abundant protein in blood plasma and the iron is essential for many cellular processes. However, the interaction between Fe³⁺ and haem-free serum albumin remains unclear. Here we provide evidence for the fact that haem-free BSA possesses one specific Fe³⁺-binding site. The binding of Fe³⁺ to BSA results in a significant quenching of the Trp fluorescence of BSA. The average apparent dissociation constant value for the interaction of Fe³⁺ and BSA is 3.46 × 10⁻⁸ ± 3 × 10⁻¹⁰ M at 37 °C and 3.30 × 10⁻⁸ ± 5 × 10⁻¹⁰ M at 25 °C, respectively, as determined by fluorescence titration. Addition of 50 μM Fe²⁺ to 1 μM BSA results in an obvious hysteretic effect on the fluorescence of BSA. The time-dependent fluorescence quenching of BSA by Fe²⁺ is not caused by the Fe²⁺-induced conformational change of BSA, but the oxygen-dependent oxidation of Fe²⁺ to Fe³⁺. Fe²⁺ undergoes an oxygen-dependent oxidation to Fe³⁺ under aerobic conditions, which is accelerated by the interaction of BSA with Fe³⁺ and extensively inhibited under anaerobic conditions. The results suggest that BSA may take part in non-transferrin bound iron transfer.     

A New Piperidine Derivatized-Schiff Base Based “Turn-on” Cu<Superscript>2+</Superscript>Chemo-Sensor

In this study, we report the synthesis of new Schiff base E-1-(((1-benzylpiperidin-4-yl)imino)methyl)naphthalenee-2-ol (L) and evaluation of its fluorescence response toward Cu²⁺ ion. Preliminary, solvent effect, metal selectivity and metal ligand ratio were analyzed through UV-Visible study. Fluorescence response toward Cu²⁺ was carried to assess the fluorescent property of synthesized Schiff base. The probe exhibited a higher fluorescence enhancement in the presence of Cu²⁺ over other metal ions (Ni²⁺, Zn²⁺, Hg²⁺, Co²⁺, Cd²⁺, Al³⁺, Fe²⁺, and Pb²⁺). The binding stoichiometry between L and Cu²⁺ has been investigated using Job’s plot and Benesi-Hildebrand equation and it was found that ligand L can form 1:1 L-Cu²⁺ complex with binding constant (K _a) of 4?×?10⁴ LM^?1.     

A Novel Ratiometric Fluorescent Chemosensor for Cd2+

Novel ratiometric fluorescent chemosensor C7 was synthesized and characterized by UV–vis and fluorescence spectroscopy. C7 showed high sensitivity for Cd²⁺ among Na⁺, Mg²⁺, Cu²⁺, Pb²⁺, Ni²⁺, Fe³⁺, Zn²⁺, Ag⁺ Hg²⁺ and Cd²⁺ in ethanol.