A deteriorating cold standby repairable system with priority in use

In this paper, a cold standby repairable system consisting of two dissimilar components and one repairman is studied. In this system, it is assumed that the working time distributions and the repair time distributions of the two components are both exponential and component 1 is given priority in use. After repair, component 2 is “as good as new” while component 1 follows a geometric process repair. Under these assumptions, using the geometric process and a supplementary variable technique, some important reliability indices such as the system availability, reliability, mean time to first failure (MTTFF), rate of occurrence of failure (ROCOF) and the idle probability of the repairman are derived. A numerical example for the system reliability R(t) is given. And it is considered that a repair-replacement policy based on the working age T of component 1 under which the system is replaced when the working age of component 1 reaches T. Our problem is to determine an optimal policy T^∗ such that the long-run average cost per unit time of the system is minimized. The explicit expression for the long-run average cost per unit time of the system is evaluated, and the corresponding optimal replacement policy T^∗ can be found analytically or numerically. Another numerical example for replacement model is also given.     

Optimal control of the N policy M/G/1 queueing system with server breakdowns and general startup times

This paper deals with an N policy M/G/1 queueing system with a single removable and unreliable server whose arrivals form a Poisson process. Service times, repair times, and startup times are assumed to be generally distributed. When the queue length reaches N(N ? 1), the server is immediately turned on but is temporarily unavailable to serve the waiting customers. The server needs a startup time before providing service until there are no customers in the system. We analyze various system performance measures and investigate some designated known expected cost function per unit time to determine the optimal threshold N at a minimum cost. Sensitivity analysis is also studied.     

The randomized threshold for the discrete-time Geo/G/1 queue

This paper discusses a discrete-time Geo/G/1 queue, in which the server operates a random threshold policy, namely 〈p, N〉 policy, at the end of each service period. After all the messages are served in the queue exhaustively, the server is immediately deactivated until N messages are accumulated in the queue. If the number of messages in the queue is accumulated to N, the server is activated for services with probability p and deactivated with probability (1 − p). Using the generating functions technique, the system state evolution is analyzed. The generating functions of the system size distributions in various states are obtained. Some system characteristics of interest are derived. The long-run average cost function per unit time is analytically developed to determine the joint optimal values of p and N at a minimum cost.     

Optimal inspection policy for three-state systems monitored by control charts

This paper presents the formulations of the expected long-run cost per time unit for a system monitored by a static control chart and by an adaptive control chart respectively. The static chart has a fixed sampling interval and a fixed sample size. The adaptive chart has a fixed sample size but variable sampling intervals. The system is supposed to have three states, normal working state, failure delay time state, and failed state. Two levels of repair are used to maintain the system. A minor repair is used to restore the system if a detectable defect is confirmed by an inspection. A major repair will be performed if the system fails. The expected cost per time unit for maintaining such a system is obtained. The objective of such analysis is to find an optimal sampling policy for the inspection process. An artificially generated data example and a real data example are used to compare the expected cost per time unit for both the static and adaptive control charts.     

The GI/M/1 queue with start-up period and single working vacation and Bernoulli vacation interruption

Consider a GI/M/1 queue with start-up period and single working vacation. When the system is in a closed state, an arriving customer leading to a start-up period, after the start-up period, the system becomes a normal service state. And during the working vacation period, if there are customers at a service completion instant, the vacation can be interrupted and the server will come back to the normal working level with probability p (0 ? p ? 1) or continue the vacation with probability 1 − p. Meanwhile, if there is no customer when a vacation ends, the system is closed. Using the matrix-analytic method, we obtain the steady-state distributions for the queue length at both arrival epochs and arbitrary epochs, the waiting time and sojourn time.     

Cost optimization of a repairable M/G/1 queue with a randomized policy and single vacation

This paper deals with the (p, N)-policy M/G/1 queue with an unreliable server and single vacation. Immediately after all of the customers in the system are served, the server takes single vacation. As soon as N customers are accumulated in the queue, the server is activated for services with probability p or deactivated with probability (1 − p). When the server returns from vacation and the system size exceeds N, the server begins serving the waiting customers. If the number of customers waiting in the queue is less than N when the server returns from vacation, he waits in the system until the system size reaches or exceeds N. It is assumed that the server is subject to break down according to a Poisson process and the repair time obeys a general distribution. This paper derived the system size distribution for the system described above at a stationary point of time. Various system characteristics were also developed. We then constructed a total expected cost function per unit time and applied the Tabu search method to find the minimum cost. Some numerical results are also given for illustrative purposes.     

有延迟修理的两部件串联系统的预防维修策略

研究由两个部件串联组成的系统的预防维修策略, 当系统的工作时间达到T时进行预防维修, 预防维修使部件恢复到上一次故障维修后的状态. 当部件发生故障后进行故障维修, 因为各种原因可能会延迟修理. 部件在每次故障维修后的工作时间形成随机递减的几何过程, 且每次故障后的维修时间形成随机递增的几何过程. 以部件进行预防维修的间隔T和更换前的故障次数N组成的二维策略(T,N)为策略, 利用更新过程和几何过程理论求出了系统经长期运行单位时间内期望费用的表达式, 并给出了具体例子和数值分析.     

An optimal replacement policy for a multistate degenerative simple system

In this paper, a degenerative simple system (i.e. a degenerative one-component system with one repairman) with k + 1 states, including k failure states and one working state, is studied. Assume that the system after repair is not “as good as new”, and the degeneration of the system is stochastic. Under these assumptions, we consider a new replacement policy T based on the system age. Our problem is to determine an optimal replacement policy T^∗ such that the average cost rate (i.e. the long-run average cost per unit time) of the system is minimized. The explicit expression of the average cost rate is derived, the corresponding optimal replacement policy can be determined, the explicit expression of the minimum of the average cost rate can be found and under some mild conditions the existence and uniqueness of the optimal policy T^∗ can be proved, too. Further, we can show that the repair model for the multistate system in this paper forms a general monotone process repair model which includes the geometric process repair model as a special case. We can also show that the repair model in the paper is equivalent to a geometric process repair model for a two-state degenerative simple system in the sense that they have the same average cost rate and the same optimal policy. Finally, a numerical example is given to illustrate the theoretical results of this model.     

A bivariate optimal replacement policy for a cold standby repairable system with preventive repair

In this paper, the repair-replacement problem for a deteriorating cold standby repairable system is investigated. The system consists of two dissimilar components, in which component 1 is the main component with use priority and component 2 is a supplementary component. In order to extend the working time and economize the running cost of the system, preventive repair for component 1 is performed every time interval T, and the preventive repair is “as good as new”. As a supplementary component, component 2 is only used at the time that component 1 is under preventive repair or failure repair. Assumed that the failure repair of component 1 follows geometric process repair while the repair of component 2 is “as good as new”. A bivariate repair-replacement policy (T, N) is adopted for the system, where T is the interval length between preventive repairs, and N is the number of failures of component 1. The aim is to determine an optimal bivariate policy (T, N)^∗ such that the average cost rate of the system is minimized. The explicit expression of the average cost rate is derived and the corresponding optimal bivariate policy can be determined analytically or numerically. Finally, a Gamma distributed example is given to illustrate the theoretical results for the proposed model.     

基于修理设备的冷贮备可修系统的维修策略

本文研究了两同型部件,一个修理设备组成的冷贮备可修系统.在故障部件不能"修复如新"的条件下,分别以系统中部件1故障次数N,工作时间T和(N,T)为维修策略,利用更新过程和几何过程,求出修理设备经长期运行单位时间内平均停工时间表达式.并在部件寿命的分布函数和修理时间的分布函数已知的情况下,以部件1故障次数N为策略证明存在最优N*使修理设备经长期运行单位时间内平均停工时间最长.最后,通过数值例子验证最优策略的存在性.     

Optimal replacement policy for a multistate repairable system

In this paper, a deteriorating simple repairable system with k + 1 states, including k failure states and one working state, is studied. The system after repair is not ‘as good as new’ and the deterioration of the system is stochastic. Under these assumptions, we study a replacement policy, called policy N, based on the failure number of the system. The objective is to maximize the long-run expected profit per unit time. The explicit expression of the long-run expected profit per unit time is derived and the corresponding optimal solution may be determined analytically or numerically. Furthermore, we prove that the model for the multistate system in this paper forms a general monotone process model which includes the geometric process repair model as a special case. A numerical example is given to illustrate the theoretical results.     

自动化车床最优刀具检测模型研究

针对自动化车床工序最优检测和刀具更换问题进行了探讨.将定期检测和将刀具更换作用于同一工序流程,在只考虑刀具故障条件下,通过概率论和更新过程理论建立了以单位时间内期望费用为目标函数的数学模型,以检测间隔和刀具更换间隔为策略,确定最优的策略使得目标函数达到最小,并求出了经长期运行单位时间内期望费用的明显表达式.最后还对结果进行了讨论.     

有两种故障状态的两部件串联系统的预防维修策略

本文研究的是由两个部件串联组成且有两种故障状态的系统的预防维修策略, 当系统的工作时间达到T时进行预防维修, 预防维修使部件恢复到上一次故障维修后的状态。每个部件发生故障都有两种状态, 可维修和不可维修。当部件的故障为可维修故障时, 修理工对其进行故障维修, 且每次故障维修后的工作时间形成随机递减的几何过程, 每次故障后的维修时间形成随机递增的几何过程。当部件发生N次可维修故障或一次不可维修故障时进行更换。以部件进行预防维修的间隔和更换前的可维修故障次数N组成的二维策略(T, N) 为策略, 利用更新过程和几何过程理论求出了系统经长期运行单位时间内期望费用的表达式, 并给出了具体例子和数值分析。     

在D-策略控制下服务员单重休假且休假不中断的M/G/1排队系统分析

该文研究在D-策略控制下服务员单重休假且休假不中断的M/G/1 排队系统,其中当服务员休假结束归来时,如果系统中等待服务的顾客所需的总服务时间之和不小于事先给定的正数阀值D,服务员就立即开始服务.运用全概率分解技术、更新过程理论和拉普拉斯变换工具,本文在任意初始状态下讨论了队长的瞬态分布,导出了队长瞬态分布的拉普拉斯变...     

The performance measures and randomized optimization for an unreliable server M/G/1 vacation system

This paper examines an M^[x]/G/1 queueing system with a randomized vacation policy and at most J vacations. Whenever the system is empty, the server immediately takes a vacation. If there is at least one customer found waiting in the queue upon returning from a vacation, the server will be immediately activated for service. Otherwise, if no customers are waiting for service at the end of a vacation, the server either remains idle with probability p or leaves for another vacation with probability 1 − p. This pattern continues until the number of vacations taken reaches J. If the system is empty by the end of the Jth vacation, the server becomes idle in the system. Whenever one or more customers arrive at server idle state, the server immediately starts providing service for the arrivals. Assume that the server may meet an unpredictable breakdown according to a Poisson process and the repair time has a general distribution. For such a system, we derive the distributions of important system characteristics, such as system size distribution at a random epoch and at a departure epoch, system size distribution at busy period initiation epoch, the distributions of idle period, busy period, etc. Finally, a cost model is developed to determine the joint suitable parameters (p^∗, J^∗) at a minimum cost, and some numerical examples are presented for illustrative purpose.     

An extended replacement policy for a deteriorating system with multi-failure modes

In this paper, the maintenance problem for a deteriorating system with k + 1 failure modes, including an unrepairable failure (catastrophic failure) mode and k repairable failure (non-catastrophic failure) modes, is studied. Assume that the system after repair is not “as good as new” and its deterioration is stochastic. Under these assumptions, an extended replacement policy N is considered: the system will be replaced whenever the number of repairable failures reaches N or the unrepairable failure occurs, whichever occurs first. Our purpose is to determine an optimal extended policy N^∗ such that the average cost rate (i.e. the long-run average cost per unit time) of the system is minimized. The explicit expression of the average cost rate is derived, and the corresponding optimal extended policy N^∗ can be determined analytically or numerically. Finally, a numerical example is given to illustrate some theoretical results of the repair model proposed in this paper.     

Single machine scheduling problems with controllable processing times and total absolute differences penalties

In this paper, we consider single machine scheduling problem in which job processing times are controllable variables with linear costs. We concentrate on two goals separately, namely, minimizing a cost function containing total completion time, total absolute differences in completion times and total compression cost; minimizing a cost function containing total waiting time, total absolute differences in waiting times and total compression cost. The problem is modelled as an assignment problem, and thus can be solved with the well-known algorithms. For the case where all the jobs have a common difference between normal and crash processing time and an equal unit compression penalty, we present an O(n log n) algorithm to obtain the optimal solution.     

Working vacations queueing model with multiple types of server breakdowns

This paper deals with a single server working vacation queueing model with multiple types of server breakdowns. In a working vacations queueing model, the server works at a different rate instead of being completely idle during the vacation period; the arrival rate varies according to the server’s status. It is assumed that the server is subject to interruption due to multiple types of breakdowns and is sent immediately for repair. Each type of breakdown requires a finite random number of stages of repair. The life time of the server and the repair time of each phase are assumed to be exponentially distributed. We propose a matrix–geometric approach for computing the stationary queue length distribution. Various performance indices namely the expected length of busy period, the expected length of working vacation period, the mean waiting time and average delay, etc. are established. In order to validate the analytical approach, by taking illustration, we compute numerical results. The sensitivity analysis is also performed to explore the effect of different parameters.     

A geometric process maintenance model with preventive repair

In this paper, a geometric process maintenance model with preventive repair is studied. A maintenance policy (T, N) is applied by which the system will be repaired whenever it fails or its operating time reaches T whichever occurs first, and the system will be replaced by a new and identical one following the Nth failure. The long-run average cost per unit time is determined. An optimal policy (T^∗, N^∗) could be determined numerically or analytically for minimizing the average cost. A new class of lifetime distribution which takes into account the effect of preventive repair is studied that is applied to determine the optimal policy (T^∗, N^∗).