Comparison of different flow-through adsorptive stripping voltammetric methods for the determination of molybdenum(VI)

Four different complexing reagents namely chloranilic acid, oxine, tropolone, and cupferron were applied for AdSV determinations of molybdenum. The parameters for the determination using a flow-through cell with a hanging mercury drop (HMDE) as working electrode were examined systematically for all four systems and evaluated. Cyclic voltammograms were recorded to examine the electrode reaction, alternating current (AC) voltammetry was used to determine adsorption processes. The comparison includes sensitivity, detection limit, linear concentration range, the susceptibility to interference by organic compounds or foreign ions, and the applicability to sea and tap water samples. The interpretation of the electrode reaction mechanism for the reduction of the Mo cupferron complex published from Jiao et al. [10] was improved. Received: 12 February 1999 / Revised: 10 May 1999 / Accepted: 14 May 1999     

Comparison of different flow-through adsorptive stripping voltammetric methods for the determination of molybdenum(VI)

Four different complexing reagents namely chloranilic acid, oxine, tropolone, and cupferron were applied for AdSV determinations of molybdenum. The parameters for the determination using a flow-through cell with a hanging mercury drop (HMDE) as working electrode were examined systematically for all four systems and evaluated. Cyclic voltammograms were recorded to examine the electrode reaction, alternating current (AC) voltammetry was used to determine adsorption processes. The comparison includes sensitivity, detection limit, linear concentration range, the susceptibility to interference by organic compounds or foreign ions, and the applicability to sea and tap water samples. The interpretation of the electrode reaction mechanism for the reduction of the Mo cupferron complex published from Jiao et al. [10] was improved. Received: 12 February 1999 / Revised: 10 May 1999 / Accepted: 14 May 1999     

Spectrophotometric determination of molybdenum(VI)

Molybdenum(IV) gives a red colour with ammonium thiocyanate in 5-8M hydrochloric acid medium, the Sandell sensitivity index being 0.018 ppm Mo(VI)/cm(2). Molybdenum(VI) in 4-7M hydrochloric acid medium forms a red complex with ethyl xanthate and ammonium thiocyanate and this can be extracted into acetophenone. Beer's law is obeyed over the range of 1.2-13.8 ppm, and the Sandell indices at 370 and 470 nm are 0.0016 and 0.0068 ppm/cm(2) respectively. The colour is stable for 40 hr. Most cations do not interfere.     

Complexometric determination of molybdenum(VI)

In acidic medium molybdenum(VI) forms a stable complex on boiling with excess of DCTA and hydroxylamine hydrochloride. Molybdenum can then be determined by back-titration of the excess of DCTA either with zinc chloride at pH 5-5.5 or with thorium nitrate at pH 3-4.5, Xylenol Orange being used as indicator in both cases. A simple method for the determination of molybdenum in the presence of moderate amounts of tungsten is also described.     

Method of two reagents on a solid phase for the determination of simultaneously present vanadium(V) and molybdenum(VI)

The possibility of the use of two reagents for the determination of two elements from one sample on one disk of fibrous sorbent was studied. Vanadium(V) and molybdenum(VI) are sorbed on a disk of an anionexchange fibrous material and, next, sequentially detected by diffuse reflection spectrometry with 8-hydroxyquinoline-5-sulfonic acid and phenylfluorone. It was demonstrated that vanadium and molybdenum can be determined when present simultaneously in ratios from 1 : 10 to 10 : 1 in the concentration range 0.01-0.15 ώg/mL (RSD < 15%). The detection limit is 0.005 and 0.003 ώg/mL for vanadium and molybdenum, respectively.     

A new volumetric method for the determination of molybdenum(VI)

Summary A new volumetric method has been developed for the determination of molybdenum(VI). The method consists in the reduction of molybdenum(VI) by heating with a slight excess of hydrazine sulphate in 1 to 2 M hydrochloric acid medium for ten minutes on a water bath. The mixture is cooled and the molybdenum(V) obtained determined by titration with a standard solution of ceric sulphate at an overall acidity of 4 N hydrochloric acid, using diphenyl benzidine as indicator and adding 5 ml of syrupy phosphoric acid for 50 ml of the mixture. Alternately the molybdenum(V) can be titrated with a standard solution of ceric sulphate at an overall acidity of 3 N hydrochloric acid using ferroin as indicator and adding 5 ml of syrupy phosphoric acid for 50 ml of the titration mixture. The molybdenum(V) can also be titrated with a standard solution of sodium vanadate in 8 N sulphuric acid medium, using N-phenyl anthranilic acid as indicator. Alternately, the titration with sodium vanadate can be made with diphenyl benzidine as indicator in 4 N acid medium, adding 5 ml of syrupy phosphoric acid and 1 ml of 1.0 M oxalic acid to catalyse the indicator action. The method now proposed is much more convenient than the methods currently available. It is simple because it does not require any costly chemicals or complicated apparatus. Furthermore, it has the advantages of great rapidity and excellent precision.     

Kinetic-spectrophotometric determination of molybdenum (VI) and tungsten (VI) in mixtures

A simple kinetic-spectrophotometric method is described for the determination of molybdenum(VI) and tungsten(VI) in mixtures, without prior separation. The method is based on the catalytic effect of molybdenum(VI) and tungsten(VI) on the oxidation of 2,4-diaminophenol dihydrochloride (DAP) by hydrogen peroxide in acidic medium. The reaction was followed spectrophotometrically by measuring the rate of change in absorbance with time at 500 nm. A partial inhibition in the catalytic activity of each catalyst, when the other one is present, at all ratios of Mo(VI) W(VI) mixtures studied was observed. On the other hand, the catalytic activity of tungsten(VI) dropped to zero whilst that of molybdenum(VI) decreased slightly, in the presence of citrate ions. Two sets of experiments were carried out, the first in the absence and the other in the presence of citrate, and the resolution of Mo(VI)/W(VI) mixtures was achieved by solving two simultaneous equations. Various molar ratios of Mo(VI) W(VI), at the 10^–6 M level, from 0.2 1 to 5 1 can be determined with satisfactory precision and accuracy. The selectivity of the method was investigated and the method was applied successfully to the determination of molybdenum and tungsten in each other's presence in steel.     

A new method for the voltammetric determination of molybdenum(VI) using carbon paste electrodes modified in situ with cetyltrimethylammonium bromide

Molybdenum(VI) is determined by anodic stripping voltammetry using a carbon paste electrode modified in situ with cetyltrimethylammonium bromide (CTAB). The preconcentration of molybdenum is performed by adsorption and reduction of ion-pairs of cetyltrimethylammonium and molybdenum(VI) oxalate at a potential of −0.4 V vs. the saturated calomel electrode (SCE). The supporting electrolyte contains 0.01 M oxalic acid and 0.075 mM CTAB. Differential pulse anodic stripping voltammetry exploiting the reoxidation signal is used for the determination of trace levels of molybdenum(VI). Linearity between current and concentration exists for a range of 0.5–500 μg 1⁻¹ Mo with proper preconcentration times; the limit of detection (calculated as 3σ) is 0.04 μg 1⁻¹ with an accumulation period of 10 min.     

Polarographic determination of nanomolar concentrations of molybdenum(VI)

Summary Polarographic Determination of Nanomolar Concentrations of Molybdenum (VI) A new differential pulse polarographic method for the determination of Mo(VI) is described. Mo(VI) is first chelated by 7-nitro-8-hydroxychinoline-5-sulfonic acid at pH 1. The complex ion MoO₂L₂ ^2– formed is strongly adsorbed on the surface of a dropping mercury electrode. At a potential difference of 0.95 V the complex ion is reduced to a Mo(V)-complex, which is oxidized very fast by H_aq ⁺ providing the starting complex ion for repeated redox cycles. The net process consists in the catalytic reduction of H_aq ⁺ to 1/2 H₂ in the double layer. H₂ was detected by inductively coupled plasma atomic emission spectrometry. A modified preparation method for the chelating agent and its characterization are also described. The method was used for the determination of Mo(VI) in the surface water of Lake Zürich. An average value of 0.463±0.007 ng/g (4.83±0.07 nM) was calculated from 39 single values. The errors are the confidence intervals of the corresponding means at the 99% confidence level. The standard deviation and the practical detection limit were 0.016 and 0.031 ng/g, respectively, for single determinations on the average.     

Selective voltammetric determination of chromium (VI) with DTPA and nitrate

A voltammetric determination of Cr(VI) in a flow system is described based on the selective accumulation of the reduction product of Cr(VI) on an HMDE, its complexation with DTPA and subsequent reduction of the complex in presence of nitrate. The calibration graphs were linear up to 100 and 5 nmol/L for deposition times 120 and 600 s, respectively. The relative standard deviation was 2.8% (n = 5) for Cr(VI) concentrations of 5 × 10^–8 mol/L. The detection limits (3 σ) for Cr(VI) were 1.0 and 0.12 nmol/L at deposition times of 120 and 600 s, respectively. Typical interferences derived from real water samples are discussed. The method has been applied for the determination of Cr(VI) in spiked natural water samples.     

Method for the determination of chromium (VI) as chromium (VI)-dibenzyidithiocarbamate

Dibenzyldithiocarbamic acid (DBDC) exhibits the ability to speciate between chromium(VI) and chromium(III), since only the chromium(VI) will form complexes with DBDC. The complex is then extracted into an organic solvent and assayed using an ultraviolet-visible (UV-VIS) spectrophotometer at 498.8 nm. Using 250 ml of aqueous sample detection limits less than 1 ng/ml are possible, while the linear range extends to 500 gmg/ml when working at 498.8 nm. Oxidation of the chromium(III) to chromium (VI) using cerium (IV) enables the determination of total chromium and subsequently the chromium (III) in solution. Evaluation of the method with a standard reference material produced only 4.81 part per thousand error in the determination of chromium(VI).     

Selective voltammetric determination of chromium (VI) with DTPA and nitrate

A voltammetric determination of Cr(VI) in a flow system is described based on the selective accumulation of the reduction product of Cr(VI) on an HMDE, its complexation with DTPA and subsequent reduction of the complex in presence of nitrate. The calibration graphs were linear up to 100 and 5 nmol/L for deposition times 120 and 600 s, respectively. The relative standard deviation was 2.8% (n = 5) for Cr(VI) concentrations of 5 × 10^–8 mol/L. The detection limits (3 σ) for Cr(VI) were 1.0 and 0.12 nmol/L at deposition times of 120 and 600 s, respectively. Typical interferences derived from real water samples are discussed. The method has been applied for the determination of Cr(VI) in spiked natural water samples. Received: 18 June 1998 / Revised: 28 September 1998 / Accepted: 5 October 1998     

Use of organic reagents for the voltammetric determination of rare-earth elements

The data on organic reagents used for the voltammetric determination of rare-earth elements (REE) is surveyed. The mechanisms of the reduction of complexes formed by REE with some reagents are presented. Procedures for determining REE in real samples using organic reagents are briefly characterized.__________Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 4, 2005, pp. 342–348.Original Russian Text Copyright © 2005 by Dubenskaya, Levitskaya, Poperechnaya.     

A reliable and ultrasensitive voltammetric method for the determination of molybdenum

Summary The determination of molybdenum(VI) in aquatic media by polarography, voltammetry and adsorptive stripping voltammetry using the formation of a Mo-chlorate-mandalic acid complex at +100 mV (SCE) is described. The 3 s_blank-detection limit is 0.1 nmol/l with differential pulse adsorptive stripping voltammetry (DPAdsSV, catalytic current). The calibration graphs are linear up to 200 nmol/l for the latter, 400 nmol/l for staircase voltammetry without accumulation time and 1 mg/l for staircase polarography. The accuracy of the DPAdsSV method was checked by analysis of a standard reference water material. The utility of differential pulse voltammetry was tested in different aquatic media, e.g., tap water, ground water, surface water.

---

Eine zuverlässige und äußerst empfindliche Methode zur Bestimmung von Molybdän

     

Pyrogallol red and bromopyrogallol red in new optical methods for the determination of molybdenum(VI) and tungsten(VI)

The complexation of molybdenum(VI) and tungsten(VI) with pyrogallol red (PR) and bromopyrogallol red (BPR) in the presence of a cationic surfactant, cetylpyridinium bromide was studied. Conditions of the preconcentration of molybdenum(VI) and tungsten(VI) as complexes with PR and BPR on Silochrom S-120 were found. The concentration coefficients were no lower than 67 for a volume of the aqueous phase of 20 mL and a mass of the sorbent of 0.3 g. Chromaticity characteristics of the complexes in solutions and on the sorbent were determined. It was demonstrated that the complex of molybdenum(VI) with BPR in the presence of cetylpyridinium bromide should be used in the analysis of materials with low concentrations of molybdenum.     

Catalytic spectrophotometric determination of molybdenum (VI) with the hydrazine-metanil yellow system

A new catalytic Spectrophotometric method for the determination of trace amounts of molybdenum (VI) has been proposed. The method is based on the catalytic effect of Mo(VI) on the reduction of metanil yellow by hydrazine dihydrochloride. Under experiment condition, the linear range of determination is 20–160 ng/mL for molybdenum and the detection limit is 11.2ng/mL. The method has been used to determine trace molybdenum in bean samples with the recovery of 96.0–99.0%, with relative standard deviations of 1.50–2.53%.     

LIX 84 as an extractant for throium(IV), uranium(VI) and molybdenum(VI)

The extraction order of Th(IV), U(VI) and Mo(VI) based on pH_0.5 values is Mo(VI)>U(VI)>Th(IV). Quantitative extraction has been observed for U(VI) by mixture of 10% (v/v) LIX 84 and 0.1M dibenzoylmethane at pH 4.2 and by mixture of 10% LIX 84 and 0.05M HTTA in the pH range 5.5–7.3 and for Mo(VI) by 10% LIX 84 from chloride media at pH 1.5. The order of extraction of Mo(VI) from 1N acid solutions is HCl>H₂SO₄>HNO₃>HClO₄ and extraction decreases very rapidly with increase in the concentration of HCl as compared to that from H₂SO₄, HNO₃ and HClO₄ acid solutions. The diluents C₆H₆, CCl₄ and CHCl₂ are found to be superior ton-butyl alcohol and isoamyl alcohol for extraction of Mo(VI). Influence of concentration of different anions on the extraction of U(VI) and Mo(VI) has been studied. Very little extraction has been observed in case of Th(IV) by LIX 84 or its mixtures with other chelating extractants or neutral donors.     

Some pyridylazo compounds as sensitive reagents for the spectrophotometric determination of nickel

Six 2-(2-pyridylazo)-5-alkoxyphenol derivatives were synthesized, and their application to the spectrophotometric determination of nickel was studied; 2-(2-pyridylazo)-5-methoxyphenol and the corresponding ethoxyphenol are very sensitive and selective. The molar absorptivity of the nickel chelate of the former is 11.3 × 10⁴ l mol^-1 cm^-1. A solvent extraction procedure for the selective determination of 1–8 μg of nickel is described.