Facile and Efficient Synthesis of Indol‐3‐yl Substituted Pyran Derivatives via One‐Pot Multicomponent Reactions under Ultrasonic Irradiation

A series of polysubstituted indol‐3‐yl substituted pyran derivatives have been synthesized via one‐pot multicomponent reactions of aldehydes, malononitrile with 3‐cyanoacetyl indoles under ultrasonic irradiation. This method has the advantages of high yield, easy operation, short‐reaction time, mild‐reaction condition, and catalyst recyclability.     

Design,synthesis and crystallographic study of novel indole‐based cyano derivatives as key building blocks for heteropolycyclic compounds of major complexity

A four‐stage reaction sequence has been designed and developed for the synthesis of highly functionalized enolate esters as key building blocks for the synthesis of novel heteropolycyclic compounds of potential pharmaceutical value. The sequence starts with simple commercially available indoles and proceeds via 3‐(indol‐3‐yl)‐3‐oxopropanenitriles, which react with 2‐bromobenzaldehyde to form the corresponding chalcones; these are readily reduced to dihydrochalcones, which are in turn acylated to form the enolate esters. The compounds in this sequence have been characterized by IR and ¹H and ¹³C NMR spectroscopy, by mass spectrometry and by elemental analysis. The molecular and supramolecular structures are reported for representative examples, namely (E )‐3‐(2‐bromophenyl)‐2‐(1‐methyl‐1H‐indole‐3‐carbonyl)acrylonitrile, C₁₉H₁₃BrN₂O, (Ib ), (2RS )‐2‐(2‐bromobenzyl)‐3‐(1‐methyl‐1H‐indol‐3‐yl)‐3‐oxopropanenitrile, C₁₉H₁₅BrN₂O, (IIb ), and (2RS )‐3‐(1‐benzyl‐1H‐indol‐3‐yl)‐2‐(2‐bromobenzyl)‐3‐oxopropanenitrile, C₂₅H₁₉BrN₂O, (IIc ), the latter two of which crystallize with Z ′ = 2, and (E )‐1‐(1‐acetyl‐1H‐indol‐3‐yl)‐3‐(2‐bromophenyl)‐2‐cyanoprop‐1‐en‐1‐yl acetate, C₂₂H₁₇BrN₂O, (III), and (E )‐1‐(1‐benzyl‐1H‐indol‐3‐yl)‐3‐(2‐bromophenyl)‐2‐cyanoprop‐1‐en‐1‐yl benzoate, C₃₂H₂₃BrN₂O, (IV). The structure of the related chalcone (E )‐2‐benzoyl‐3‐(2‐bromophenyl)prop‐2‐enenitrile, (V), has been redetermined at 100 K, where it is monoclinic, as opposed to the triclinic form reported at ambient temperature.     

An efficient one‐pot synthesis of 2‐benzylpyrroles and 3‐benzylindoles

One‐pot regioselective benzylation of pyrroles and indoles using zirconium tetrachloride is discussed. This has been achieved by in‐situ generation of di(1H‐pyrrol‐1‐yl)zirconium(IV) chloride and di(1H‐indol‐1‐yl)zirconium(IV) chloride. It was observed that benzylation reactions of these complexes using n‐BuLi occurred at C‐2 position for pyrrole and C‐3 for indole. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of Some Novel bis‐Spiro[indole‐pyrazolinyl‐thiazolidine]‐2,4′‐diones

The reaction of 1H‐indol‐2,3‐diones with 1,6‐dibromohexane has resulted in the formation of new 1H‐indol‐2,3‐diones‐1,1′‐(1,6‐hexanediyl)bis in quantitative yields. These compounds have been used for the synthesis of novel [3′‐(2,3‐dimethyl‐5‐oxo‐1‐phenyl‐3‐pyrazolin‐4‐yl)spiro[3H‐indol‐3,2′‐thiazolidine]‐2,4′‐dione]‐1,1′‐(1,6‐hexanediyl)bis via bis Schiff's bases, [3‐(2,3‐dimethyl‐5‐oxo‐1‐phenyl‐3‐pyrazolin‐4‐yl) imino‐1H‐indol‐2‐one]‐1,1′‐(1,6‐hexanediyl)bis.     

Synthesis of Certain New Thiazole and 1,3,4‐Thiadiazole Derivatives via the Utility of 3‐Acetylindole

2‐(2‐(1‐(1H‐Indol‐3‐yl)ethylidene)‐hydrazinyl)‐4‐substituted 5‐(aryldiazenyl)thiazoles and 5‐((1‐(1H‐indol‐3‐yl)ethylidene)hydrazono)‐2‐substituted‐4‐phenyl‐4,5‐dihydro‐1,3,4‐thiadiazoles were synthesized via reaction of hydrazonoyl halides and 2‐(1‐(1H‐indol‐3‐yl)ethylidene)hydrazine‐1‐carbothioamide and alkyl 2‐(1‐(1H‐indol‐3‐yl)ethylidene)hydrazine‐1‐carbodithioate in ethanolic triethylamine. Structures of the newly synthesis were elucidated on the basis of elemental analysis, spectral data, and alternative synthetic route whenever possible.     

Synthesis of Deuterium Labeled Tryptamine Derivatives

The synthesis of deuterium labeled tryptamine derivatives, [2‐(1H‐indol‐3‐yl)‐[²H₄]‐ethyl]‐dimethylamine (DMT), [²H₁₀]‐diethyl‐[2‐(1H‐indol‐3‐yl)‐ethyl]‐amine (DET), [2‐(1H‐indol‐3‐yl)‐ethyl]‐[²H₆]‐dipropyl‐amine (DPT) and [²H₂]‐alpha‐methyltryptamine (AMT) is described. The isotopically labeled compounds are used as internal standards in gas chromatography‐mass spectrometry (GC‐MS) assays.     

A Facile Synthesis of Novel (Z)‐ethyl‐3‐(5‐substituted‐1‐alkyl/aryl‐1H‐indol‐3‐yl)‐2‐(1H‐tetrazol‐5‐yl)acrylate

A novel route was developed for synthesis of high potential 1H‐tetrazoles by using conventional method. Tetrazole scaffold is a promising pharmacophore fragment, frequently used in the development of various novel drugs. Here, the novel (Z)‐3‐(N‐alkyl‐indol‐3‐yl)‐2‐(1H‐tetrazole‐5‐yl)acrylates 5 ( a – i ) have been synthesized from (Z)‐ethyl‐3‐(1H‐indol‐3‐yl)2‐(1H‐tetrazol‐5‐yl)acrylates 4 ( a – c ) by using various alkylating agents such as Dimethyl Sulphate (DMS), Diethyl Sulphate (DES), and benzyl chloride; 4 ( a – c ) were synthesized from sodium azide in the presence of copper sulfate in dimethylformamide; 3 ( a – c ) have been prepared by Knoevenagel condensation of indole‐3‐carbaldehyde 1 ( a – c ) and ethylcyanoacetate 2 in the presence of L‐Proline as a catalyst at room temperature in ethanol for an hour. This is an efficient and clean click chemistry method that has various advantages such as easy workup, higher yields, shorter reaction times, and more economical.     

Synthesis and Biological Activities of 7‐Arylazo‐7H‐pyrazolo[5,1‐c][1,2,4] Triazol‐6(5H)‐Ones and 7‐Arylhydrazono‐7H‐[1,2,4]triazolo[3,4‐b] [1,3,4]thiadiazines

Two series of 7‐arylazo‐7H‐3‐(2‐methyl‐1H‐indol‐3‐yl)pyrazolo[5,1‐c][1,2,4]triazol‐6(5H)‐ones 4 and 7‐arylhydrazono‐7H‐3‐(2‐methyl‐1H‐indol‐3‐yl)‐[1,2,4]triazolo[3,4‐b][1,3,4]thiadiazines 7 were prepared via reactions of 4‐amino‐3‐mercapto‐5‐(2‐methyl‐1H‐indol‐3‐yl)‐1,2,4‐triazole 1 with ethyl arylhydrazono‐chloroacetate 2 and N‐aryl‐2‐oxoalkanehydrazonoyl halides 5 , respectively. A possible mechanism is proposed to account for the formation of the products. The biological activity of some of these products was also evaluated.     

Highly Efficient [3 + 2] Cycloaddition: Click Synthesis of Novel 1H‐indol‐3‐yl‐benzo[d]imidazole Bis‐triazoles

A series of novel 1‐((1H‐1,2,3‐triazol‐4‐yl)methyl)‐2‐(1‐((1H‐1,2,3‐triazol‐4‐yl)methyl)‐5‐substituted‐1H‐indol‐3‐yl)‐6‐substituted‐1H‐benzo[d]imidazoles 5a – i have been prepared using click chemistry as an ideal strategy where [3 + 2] cycloaddition of azides with terminal alkynes has been developed as the target compounds. In route‐II, 5‐substituted‐1H‐indole‐3‐carbaldehydes 1a – c react with 5‐substituted orthophenylenediamine 8 to give desired products, that is, 6‐substituted‐2‐(5‐substituted‐1H‐indol‐3‐yl)‐1H‐benzo[d]imidazole 6a – i . Here, 6a – i react with 2 equiv of propargylbromide 7 to give novel 6‐substituted 2‐(5‐substituted‐1‐(prop‐2‐yn‐1‐yl)‐1H‐indol‐3‐yl)‐1‐(prop‐2‐yn‐1‐yl)‐1H‐benzo[d]imidazole 4a – i . 4a – i were reacted with 2 equiv of NaN₃ in t‐butanol/water (1:2) and add catalytic amount of CuSO₄.5H₂O. Stir the reaction mixture at room temperature to get the target products 5a – i . Here, obtained products contain four rings, that is, one indole, two triazoles, and one benzimidazole. The main advantages of this method are short reaction times, easy workup, higher yields (88–92%), and no by‐products formation.     

Synthesis and NMR spectral assignments of indol‐3‐yl pyridines through one‐pot multi‐component reaction

Asimple protocol for the efficient preparation of 6‐(ferrocene‐1‐yl)‐2‐(indol‐3‐yl)pyridine and 2‐(1H‐indol‐3‐yl)‐6‐(2‐thienyl)pyridine derivatives has been achieved through multi‐component reaction, and these compounds were thoroughly characterised by 2D NMR spectral techniques. Copyright © 2010 John Wiley & Sons, Ltd.     

Pd‐Catalyzed Cyclocarbonylation of 2‐(2‐Bromoaryl)indoles with CO as a C1 Source: Selective Access to 6 H‐Isoindolo[2,1‐a]indol‐6‐ones and Indeno[1,2‐b]indol‐10(5 H)‐ones

A highly efficient and regioselective synthetic route to 6 H‐isoindolo[2,1‐a]indol‐6‐ones and indeno[1,2‐b]indol‐10(5 H)‐ones through the Pd‐catalyzed cyclocarbonylation of 2‐(2‐bromoaryl)indoles under atmospheric CO pressure has been achieved. Notably, the regioselectivity of the reaction was exclusively dependent on the structural characteristics of the indole substrates. With N‐unsubstituted indoles as the starting materials, the reaction afforded 6H‐isoindolo[2,1‐a]indol‐6‐ones in good‐to‐excellent yields. On the other hand, with N‐substituted indoles as the substrates, the reaction gave indeno[1,2‐b]indol‐10(5 H)‐ones in a highly regioselective manner.     

Alkaloids from the Bulbs of Lycoris aurea

Two new and ten known alkaloids have been isolated from the bulbs of Lycoris aurea (Amaryllidaceae). The two new compounds, lycosinine A (=[2‐(2,3‐dihydro‐1‐methyl‐1H‐indol‐7‐yl)‐4,5‐dimethoxyphenyl]methanol; 1 ) and lycosinine B (=2‐(2,3‐dihydro‐1‐methyl‐1H‐indol‐7‐yl)‐4,5‐dimethoxybenzaldehyde; 2 ), were fully characterized by spectroscopic methods. In addition, a plausible biogenesis of homolycorine from 1 and 2 is proposed (Scheme).     

A simple synthesis of 4‐chloro‐5‐hydroxy‐1H‐benzo[g]indoles

The reaction of methyl 2‐(3‐chloro‐1,4‐dioxo‐1,4‐dihydronaphthalen‐2‐yl)propenoate ( 2a ) with primary amines gave 4‐chloro‐5‐hydroxy‐3‐methoxycarbonyl‐1H‐benzo[g]indoles 5a‐f as major compounds and 3‐methoxycarbonyl‐4,9‐dioxo‐2,3,4,9‐tetrahydro‐1H‐benzo[f]indoles 6a‐d as minor ones. Whereas the reaction of 3‐(3‐chloro‐1,4‐dioxo‐1,4‐dihydronaphthalen‐2‐yl)‐3‐buten‐2‐one ( 2b ) with primary amines afforded the corresponding 1H‐benzo[g]indoles 5g‐i as major products and 3‐acetyl‐4,9‐dihydro‐4,9‐dioxo‐1H‐benzo[f]indoles 7g, h as minor products.     

Synthesis and crystal structures of some bis(3‐methyl‐1H‐indol‐2‐yl)(salicyl)methanes

Four 2,2′‐bisindolylmethanes (BIMs), a useful class of polyindolyl species joined to a central carbon, were synthesized using salicylaldehyde derivatives and simple acid catalysis; these are 2‐[bis(3‐methyl‐1H‐indol‐2‐yl)methyl]‐6‐methylphenol, (IIa), 2‐[bis(3‐methyl‐1H‐indol‐2‐yl)methyl]‐4,6‐dichlorophenol, (IIb), 2‐[bis(3‐methyl‐1H‐indol‐2‐yl)methyl]‐4‐nitrophenol, (IIc), and 2‐[bis(3‐methyl‐1H‐indol‐2‐yl)methyl]‐4,6‐di‐tert‐butylphenol, (IId). BIMs (IIa) and (IIb) were characterized crystallographically as the dimethyl sulfoxide (DMSO) disolvates, i.e. C₂₆H₂₄N₂O·2C₂H₆OS and C₂₅H₂₀Cl₂N₂O·2C₂H₆OS, respectively. Both form strikingly similar one‐dimensional hydrogen‐bonding chain motifs with the DMSO solvent molecules. BIM (IIa) packs into double layers of chains whose orientations alternate every double layer, while (IIb) forms more simply packed chains along the a axis. BIM (IIa) has a remarkably long c axis.     

New and Convergent Synthesis of Osimertinib

New and convergent synthetic route of osimertinib is described on a dozen of grams scale. A key cyclization of 1‐(4‐((2‐(dimethylamino)ethyl)(methyl)amino)‐2‐methoxy‐5‐nitrophenyl)guanidine and 3‐(dimethylamino)‐1‐(1‐methyl‐1H‐indol‐3‐yl)prop‐2‐en‐1‐one is adopted to give the 4‐(1H‐indol‐3‐yl)‐N‐phenylpyrimidin‐2‐amine structure. Osimertinib is prepared in 40.4% yield over six steps and 99.1% purity (HPLC). Purification methods of the intermediates involved in the route are also given.     

Selective Determination of Zn2+ Ion in Various Environmental,Biological and Medicinal Plant Samples Using a Novel Coated Graphite Electrode

Novel Zn²⁺ ion‐selective PVC based coated graphite electrodes were fabricated using the ionophores N‐((1H‐indol‐3‐yl)methylene)thiazol‐2‐amine (I₁), N‐((1H‐indol‐3‐yl)methyl)‐thiazol‐2‐amine (I₂) and 1‐((1H‐indol‐3‐yl)methylene)urea (I₃). Their potentiometric performance was examined in dependence of the addition of plasticizers and anion excluders and compared. It is found that the coated graphite electrode with the composition I₁:KTpClPB:o‐NPOE:PVC=9 : 1.5 : 51 : 38.5 is the best with respect to the wide working concentration range (4.2×10^?8–1.0×10^?1 mol L^?1), low detection limit (1.6×10^?8 mol L^?1) and wide pH range of 3.0–8.0. The proposed electrode was successfully applied to quantify Zn²⁺ in various environmental, biological and medicinal plant samples and used as indicator electrode.     

Green approach for the synthesis of 3‐methyl‐1‐phenyl‐4‐((2‐phenyl‐1H‐indol 3‐yl)methylene)‐1H‐pyrazole‐5(4H)‐ones and their DNA Cleavage,antioxidant, and antimicrobial activities

3‐Methyl‐1‐phenyl‐4‐((2‐phenyl‐1H‐indol‐3‐yl)methylene)‐1H‐pyrazol‐5(4H)‐ones (5a‐i) was prepared by the condensation reaction of different 3‐formyl‐2‐phenylindole derivatives (2a‐i) and 3‐methyl‐1‐phenyl‐2‐pyrazoline‐5‐one in quantitative yield by applying various green synthetic methods as grinding, microwave irradiation using different catalysts under solvent‐free mild reaction conditions with high product yields. The structures of the synthesized compounds were characterized on the basis of elemental analysis, infrared, ¹HNMR, ¹³C NMR, and mass spectral data. The synthesized compounds were screened for free radical scavenging, antimicrobial, and DNA cleavage activities. Most of the tested compounds belonging to the 3‐methyl‐1‐phenyl‐4‐((2‐phenyl‐1H‐indol‐3‐yl)methylene)‐1H‐pyrazol‐5(4H)‐ones series exhibited promising activities.     

Synthesis,crystal structures,antiproliferative activities and reverse docking studies of eight novel Schiff bases derived from benzil

Eight novel Schiff bases derived from benzil dihydrazone ( BDH ) or benzil monohydrazone ( BMH ) and four fused‐ring carbonyl compounds (3‐formylindole, FI ; 3‐acetylindole, AI ; 3‐formyl‐1‐methylindole, MFI ; 1‐formylnaphthalene, FN ) were synthesized and characterized by elemental analysis, ESI–QTOF–MS, ¹H and ¹³C NMR spectroscopy, as well as single‐crystal X‐ray diffraction. They are (1Z,2Z)‐1,2‐bis{(E)‐[(1H‐indol‐3‐yl)methylidene]hydrazinylidene}‐1,2‐diphenylethane ( BDHFI ), C₃₂H₂₄N₆, (1Z,2Z)‐1,2‐bis{(E)‐[1‐(1H‐indol‐3‐yl)ethylidene]hydrazinylidene}‐1,2‐diphenylethane ( BDHAI ), C₃₄H₂₈N₆, (1Z,2Z)‐1,2‐bis{(E)‐[(1‐methyl‐1H‐indol‐3‐yl)methylidene]hydrazinylidene}‐1,2‐diphenylethane ( BMHMFI ) acetonitrile hemisolvate, C₃₄H₂₈N₆·0.5CH₃CN, (1Z,2Z)‐1,2‐bis{(E)‐[(naphthalen‐1‐yl)methylidene]hydrazinylidene}‐1,2‐diphenylethane ( BDHFN ), C₃₆H₂₆N₄, (Z)‐2‐{(E)‐[(1H‐indol‐3‐yl)methylidene]hydrazinylidene}‐1,2‐diphenylethanone ( BMHFI ), C₂₃H₁₇N₃O, (Z)‐2‐{(E)‐[1‐(1H‐indol‐3‐yl)ethylidene]hydrazinylidene}‐1,2‐diphenylethanone ( BMHAI ), C₂₄H₁₉N₃O, (Z)‐2‐{(E)‐[(1‐methyl‐1H‐indol‐3‐yl)methylidene]hydrazinylidene}‐1,2‐diphenylethanone ( BMHMFI ), C₂₄H₁₉N₃O, and (Z)‐2‐{(E)‐[(naphthalen‐1‐yl)methylidene]hydrazinylidene}‐1,2‐diphenylethanone ( BMHFN ) C₂₅H₁₈N₂O. Moreover, the in vitro cytotoxicity of the eight title compounds was evaluated against two tumour cell lines (A549 human lung cancer and 4T₁ mouse breast cancer) and two normal cell lines (MRC‐5 normal lung cells and NIH 3T3 fibroblasts) by MTT assay. The results indicate that four ( BDHMFI , BDHFN , BMHMFI and BMHFN ) are inactive and the other four ( BDHFI , BDHAI , BMHFI and BMHAI ) show severe toxicities against human A549 and mouse 4T₁ cells, similar to the standard cisplatin. All the compounds exhibited weaker cytotoxicity against normal cells than cancer cells. The Swiss Target Prediction web server was applied for the prediction of protein targets. After analyzing the differences in frequency hits between these active and inactive Schiff bases, 18 probable targets were selected for reverse docking with the Surflex‐dock function in SYBYL‐X 2.0 software. Three target proteins, i.e. human ether‐á‐go‐go‐related (hERG) potassium channel, the inhibitor of apoptosis protein 3 and serine/threonine‐protein kinase PIM1, were chosen as the targets. Finally, the ligand‐based structure–activity relationships were analyzed based on the putative protein target (hERG) docking results, which will be used to design and synthesize novel hERG ion channel inhibitors.     

Synthesis of some polycyclic 1,2,4‐triazines disposing of acidic N‐H group

7‐(6‐Azauracil‐5‐yl)‐isatin 1 was converted through its thiosemicarbazone 2 to 6‐(6‐azauracil‐5‐yl)‐2,3‐dihydro‐5H‐1,2,4‐triazino[5,6‐b]indol‐3‐thione 3 and through the thiosemicarbazone of appropriate isatinic acid to 2‐(2‐thio‐6‐azauracil‐5‐yl)‐6‐(6‐azauracil‐5‐yl)‐aniline 4. The course of the cyclocondensation of this compound was studied and the reaction was found to proceed in both possible ways, resulting in a mixture of compound 3 and regioisomer 6‐(2‐thio‐6‐azauracil‐5‐yl)‐2,3‐dihydro‐5H‐1,2,4‐triazino[5,6‐b]‐indol‐3‐one 5. Substituted aniline 4 was oxidized to 2,6‐bis‐(6‐azauracil‐5‐yl)‐aniline 7 , which served for the preparation of hydrazone 8 , cyclization of which led to 1‐[2,6‐bis‐(6‐azauracil‐5‐yl)‐phenyl]‐6‐azauracil‐5‐carbonitrile 9. This is the first tricyclic 6‐azauracil with vicinal arrangement of 6‐azauracil rings.     

The Synthesis of 6‐Substituted Pyrido[2,3‐d]pyrimidine‐2,4(1H,3H)‐diones Using Aminomethylene Malondialdehydes and 6‐Aminouracils

Variously substituted aminomethylene malondialdehydes (2‐(3,3‐dimethylindolin‐2‐ylidene)malondialdehydes) were reacted with some 6‐aminouracils, to give 6‐(3,3‐dimethyl‐3H‐indol‐2‐yl)pyrido[2,3‐d]pyrimidine‐2,4‐(1H,3H)‐diones in good yields.