Microwave‐assisted Synthesis of 6‐{(5‐Aryl‐1,3,4‐oxadiazol‐2‐yl)methyl}‐6H‐indolo[2,3‐b]quinoxalines

An efficient and convenient synthesis of a new series of 2‐{(6H‐indolo[2,3‐b]quinoxalin‐6‐yl)methyl}‐5‐aryl‐1,3,4‐oxadiazoles from readily available 1,2‐diaminobenzene and isatins under microwave irradiation conditions was disclosed. The 6‐{(5‐aryl‐1,3,4‐oxadiazol‐2‐yl)methyl}‐6H‐indolo[2,3‐b]quinoxalines were also prepared by the thermal cyclo‐condensation reaction of 2‐(6H‐indolo[2,3‐b]quinoxalin‐6‐yl)acetohydrazides with carboxylic acids in refluxing POCl₃. The microwave‐assisted synthesis was rapid and resulted in higher yield of the products at lower operating temperature with reduced waste generation in comparison with the thermal reaction protocol.     

Synthesis of some N-[pyridyl(phenyl)carbonylamino]-alkyl-1,2,3,6-tetrahydropyridines

Alkyl substituted 2,4-dinitrophenylpyridinium chlorides 3 are formed by the nucleophilic substitution of 1-chloro-2,4-dinitrobenzene with alkyl pyridines. Reaction of pyridyl acid hydrazides or benzoyl hydrazides 4 with the pyridinium chlorides 3 furnish the isolable 2,4-dinitroanilino derivatives 5 which undergo hydrolysis when refluxed in water:p-dioxane mixture (1:4 v/v) to yield the pyridinium ylides 6 . Sodium borohydride reduction of 6 in absolute ethanol at 0° for 4 hours result the formation of the title compounds 7 in moderate to excellent yields.     

Palladium‐Catalyzed One‐Pot Three‐ or Four‐Component Coupling of Aryl Iodides,Alkynes, and Amines through CN Bond Cleavage: Efficient Synthesis of Indole Derivatives

An efficient synthesis of N‐substituted indole derivatives was realized by combining the Pd‐catalyzed one‐pot multicomponent coupling approach with cleavage of the C(sp³)?N bonds. Three or four components of aryl iodides, alkynes, and amines were involved in this coupling process. The cyclopentadiene–phosphine ligand showed high efficiency. A variety of aryl iodides, including cyclic and acyclic tertiary amino aryl iodides, and substituted 1‐bromo‐2‐iodobenzene derivatives could be used. Both symmetric and unsymmetric alkynes substituted with alkyl, aryl, or trimethylsilyl groups could be applied. Cyclic secondary amines such as piperidine, morpholine, 4‐methylpiperidine, 1‐methylpiperazine, 2‐methylpiperidine, and acyclic amines including secondary and primary amines all showed good reactivity. Further application of the resulting indole derivatives was demonstrated by the synthesis of benzosilolo[2,3‐b]indole.     

Rapid Synthesis of 2‐Alkanol‐substituted Pyrrolo[2,3‐b]quinoxalines from Propargylic Alcohols via Copper‐free Sonogashira Coupling Reaction at Room Temperature

A practical and efficient procedure is established for the synthesis of 2‐alkanol‐substituted pyrrolo[2,3‐b]quinoxalines by the reaction of N‐alkyl‐3‐chloroquinoxaline‐2‐amines with propargylic alcohols. The reaction is carried out in the absence of any copper salt but in the presence of a catalytic amount of Pd(PPh₃)₂Cl₂ at room temperature. The Sonogashira coupling reaction step in this procedure is fast, producing clean products with high yields without contamination by unwanted homocoupling Glaser reaction products. The synthesized pyrroloquinoxaline derivatives are also screened against the three bacterial strains Micrococcus luteus, pseudomonas aeruginosa, and Bacillus subtilis.     

Synthesis of alkyl or aryl pyridazinyl ethers

This paper presents the synthesis of some alkyl or aryl pyridazinyl ethers from 2‐alkyl‐4‐halo‐5‐hydroxy‐and 2‐alkyl‐4,5‐dichloropyridazin‐3(2H)‐ones or 3,6‐dichloropyridazine. Reaction of 2‐alkyl‐4‐halo‐5‐hydroxypyridazin‐3(2H)‐ones 1 with 1,2‐dibromoethane or 1,3‐dibromopropane gave the corresponding monopyridazin‐5‐yl ethers 2 and α,ω‐[di(pyridazin‐5‐oxy)]alkanes 3 . Treatment of 4 with 4‐substituted‐phenol afforded 5‐(4‐substituted‐phenoxy)‐2‐(4‐substituted‐phenoxymethyl) derivatives 5 . Reaction of 2‐alkyl‐4,5‐dichloro derivatives 7 with 1 gave the corresponding di(pyridazin‐5‐yl) ethers 8 in good yields. Compound 10 was reacted with catechol to give monopyridazin‐3‐yl ether 11 and/or di(pyridazin‐3‐yl) ether 12 . Also we described the results for the reaction of 2‐alkyl‐4‐chloro‐5‐(4‐substituted‐phenoxy)pyridazin‐3(2H)‐ones with nucleophiles.     

One‐Pot Synthesis of 1,4‐Oxathiino[2,3‐b]quinoxalines or ‐pyrazines from 2,3‐Dichloroquinoxaline or ‐pyrazine and 1‐Aryl‐2‐bromoalkan‐1‐ones

An efficient one‐pot synthesis of novel heterocyclic derivatives, 2‐aryl‐1,4‐oxathiino[2,3‐b]quinoxalines or ‐pyrazines 5 , via the reaction of 2,3‐dichloroquinoxaline or ‐pyrazine with Na₂S?9 H₂O, and subsequent treatment of the resulting 2‐chloro‐3‐sodiosulfanylquinoxaline or ‐pyrazine 2 with 1‐aryl‐2‐bromo‐1‐alkanones and then NaH under mild conditions is described.     

Using Calcium Carbide as an Acetylene Source for Cascade Synthesis of Pyrrolo[2,3‐b]quinoxalines via Copper‐Free Sonogashira Coupling Reaction

A palladium‐catalyzed cascade protocol has been established for the synthesis of 4‐methyl‐1‐(1H‐pyrrolo[2,3‐b]‐quinoxalin‐2‐yl)cyclohexanols and 2‐phenyl‐1‐(1H‐pyrrolo[2,3‐b]quinoxalin‐2‐yl)propan‐1‐ols through the reaction of N‐alkyl(aryl)‐3‐chloroquinoxalin‐2‐amines with calcium carbide and cyclohexanones or 2‐phenylpropanal. This one‐pot process, carried out without any copper salt in the key step of the Sonogashira coupling reaction, provides an efficient method for the synthesis of 2,3‐disubstituted pyrrolo[2,3‐b]quinoxalines in the presence of catalytic amounts of Pd(PPh₃)₂Cl₂ in DMSO/H₂O with high yields. The benefit of this strategy is the use of a commercially available, inexpensive, and less hazardous primary chemical feedstock, calcium carbide, as an acetylene source in a wet solvent.     

Novel One‐Pot Synthesis of Aziridines Containing Sydnone Moiety

A novel series of 1,1a‐dihydro‐1‐aryl‐2‐(3‐aryl‐sydnone‐4‐yl)‐azirino[1,2‐a] quinoxalines were prepared in a one‐pot reaction of 2,3‐dibromo‐1‐(3‐arylsydnone‐4‐yl‐)‐3‐arylpropan‐1‐one with o‐phenylenediamine employing triethylamine in ethanol. The new compounds were well characterized by IR,¹H NMR, mass spectra, and C,H,N analysis.     

Ruthenium Catalyzed C−H Acylmethylation of N‐Arylphthalazine‐1,4‐diones with α‐Carbonyl Sulfoxonium Ylides: Highway to Diversely Functionalized Phthalazino‐fused Cinnolines

A direct ortho‐Csp²‐H acylmethylation of 2‐aryl‐2,3‐dihydrophthalazine‐1,4‐diones with α‐carbonyl sulfoxonium ylides is achieved through a Ru^II‐catalyzed C?H bond activation process. The protocol featured high functional group tolerance on the two substrates, including aryl‐, heteroaryl‐, and alkyl‐substituted α‐carbonyl sulfoxonium ylides. Thereafter, 2‐(ortho‐acylmethylaryl)‐2,3‐dihydrophthalazine‐1,4‐diones were used as potential starting materials for the expeditious synthesis of 6‐arylphthalazino[2,3‐a]cinnoline‐8,13‐diones and 5‐acyl‐5,6‐dihydrophthalazino[2,3‐a]cinnoline‐8,13‐diones under Lawesson's reagent and BF₃?OEt₂ mediated conditions, respectively. Of these, the BF₃?OEt₂‐mediated cyclization proceeded in DMSO as a solvent and a methylene source via dual C?C and C?N bond formations.     

Diversity‐Oriented Synthesis of Substituted Benzo[b]thiophenes and Their Hetero‐Fused Analogues through Palladium‐Catalyzed Oxidative CH Functionalization/Intramolecular Arylthiolation

An efficient, high yielding route to multisubstituted benzo[b]thiophenes has been developed through palladium‐catalyzed intramolecular oxidative C?H functionalization–arylthiolation of enethiolate salts of α‐aryl‐β‐(het)aryl/alkyl‐β‐mercaptoacrylonitriles/acrylates or acrylophenones. The overall strategy involves a one‐pot, two‐step process in which enethiolate salts [generated in situ through base‐mediated condensation of substituted arylacetonitriles, deoxybenzoins, or arylacetates with (het)aryl (or alkyl) dithioates] are subjected to intramolecular C?H functionalization–arylthiolation under the influence of a palladium acetate (or palladium chloride)/cupric acetate catalytic system and tetrabutylammonium bromide as additive in N,N‐dimethylformamide (DMF) as solvent. In a few cases, the yields of benzo[b]thiophenes were better in a two‐step process by employing the corresponding enethiols as substrates. In a few examples, Pd(OAc)₂ (or PdCl₂) catalyst in the presence of oxygen was found to be more efficient than cupric acetate as reoxidant, furnishing benzothiophenes in improved yields by avoiding formation of side products. The method is compatible with a diverse range of substituents on the aryl ring as well as on the 2‐ and 3‐positions of the benzothiophene scaffold. The protocol could also be extended to the synthesis of a raloxifene precursor and a tubulin polymerization inhibitor in good yields. The versatility of this newly developed method was further demonstrated by elaborating it for the synthesis of substituted thieno‐fused heterocycles such as thieno[2,3‐b]thiophenes, thieno[2,3‐b]indoles, thieno[3,2‐c]pyrazole, and thieno[2,3‐b]pyridines in high yields. A probable mechanism involving intramolecular electrophilic arylthiolation via either a Pd‐S adduct or palladacycle intermediate has been proposed on the basis of experimental studies.     

Synthesis of Arylnaphthoquinones and Their Reactions with o‐Substituted Primary Aromatic Amines

Cycloaddition reaction of 2‐aryl‐1,4‐benzoquinones 1a‐d with a number of different dienes, namely 2,3‐dimethylbutadiene; 1,4‐diphenylbutadiene and anthracene yield 2‐aryl‐6,7‐dimethyl‐1,4‐ naphthoquinones 3a,b ; 2,5,8‐triphenyl‐1,4‐naphthoquinone 4 and 2‐aryl‐1,4,9,10‐tetrahydro‐9,10‐o‐benzoanthracene‐1,4‐dione 5 , respectively were investigated. In addition, the cycloaddition reaction of 2‐aryl‐1,4‐benzoquinones 1d,e with 2,3‐dimethylbutadiene was also investigated to yield 2‐aryl‐5,8‐dihydro‐6,7‐dimethyl‐1,4‐naphthohydroquinones 2a,b . Cyclocondensation reactions of Diels‐Alder adducts 2b, 3b, 5a with ethylenediamine, o‐substituted primary aromatic amines gave quinoxaline, phenazine, phenoxazine and phenothiazine ocyclic derivatives 6–14.     

Density functional study on the effect of substituent group for the monomer of donor‐acceptor copolymer

The effect of the substituent groups (alkyl or aryl) on the structure, electronic, optical properties, ionization potentials (IPs), electron affinities (EAs), and reorganization energy of the donor–acceptor monomers 5,8‐di‐2‐thienyl‐quinoxaline (T[Q]T), 4,9‐di‐2‐thienylpyrazine[2,3‐g]quinoxaline (T[PQ]T) were studied theoretically. The lowest‐lying absorption in assigned to π→π* transition, and the fluorescence can be described as originating from the ¹[ππ*] excited state. The lowest‐lying absorption and emission spectrum of T[Q]T and T[PQ]T with alkyl groups exhibit blue‐shifted, while T[Q]T and T[PQ]T with aryl groups exhibit the opposite result. The extra absorption bond at 400 nm of T[Q]T‐Bph is contributed by the π‐π* transitions between the biphenyl and acceptor fragment. Orbital compositions transfer coefficient (χ) of the donor in LUMOs is reduced with the aryl groups on the acceptor, which illuminates that the aryl contributes to intramolecular charge transfer, and the result is in accord with the analysis of reorganization energy. IPs is brought down by both of the alkyl and aryl groups, but EAs is raised only by aryl, therefore, aryl is conductive to forming excitons for D‐A‐D molecule. Consequently, T[Q]T and T[PQ]T with aryl groups are more reasonable monomers of donor–acceptor copolymers as a solar cell materials comparing with the alkyl‐introduced ones. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Synthesis of 2,3‐dihydro‐1,3‐thiazin‐4(1H)‐ ones and their remarkably facile recyclization to 2,3‐dihydropyrimidin‐4(1H)‐ones

Functionalized 2,3‐dihydro‐1,3‐thiazin‐4(1H)‐one derivatives have been synthesized by cyclocondensation of 3‐alkyl(aryl)amino‐2‐cyano‐3‐mercaptoacrylamides with aldehydes and ketones under acidic catalysis. 6‐Alkyl(aryl)amino‐5‐cyano‐2,3‐dihy‐ dro‐1,3‐thiazin‐4(1H)‐ones, when treated with a dilute solution of potassium hydroxide, are converted into the potassium salts of isomeric compounds, 1‐alkyl‐ (aryl)‐5‐cyano‐6‐mercapto‐2,3‐dihydropyrimidin‐ 4(1H)‐ones. Alkylation of the latter with dimethyl sulfate in situ furnishes 1‐alkyl(aryl)‐6‐alkylthio‐5‐ cyano‐2,3‐dihydropyrimidin‐4(1H)‐ones, whereas boiling them in ethanol with an excess of hydrochloric acid leads to starting 2,3‐dihydro‐1,3‐thiazin‐4(1H)‐ones. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:426–436, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20129     

Synthesis of bis‐N‐alkyl imidazolium salts and their palladium(0)(NHC)(η2‐MA)2 complexes

New N‐Alkyl‐substituted imidazolium salts as well as a series of their corresponding [Pd(NHC)(MA)₂] complexes have been obtained by three routes in good yield. The previously reported synthesis for the analogous N‐aryl substituted [Pd(NHC)(MA)₂] complexes has been improved. The N‐alkyl‐substituted [Pd(NHC)(MA)₂] complexes are thermally more labile than their N‐aryl counterparts. Catalytic transfer semi‐hydrogenation of phenylpropyne resulted in good to excellent chemo‐ and stereo‐ selectivity conversion into (Z)‐phenylpropene. The size of the alkyl substituents correlates with the rate of hydrogenation in the sense that more bulky substituents give rise to faster transfer hydrogenation rates. Copyright © 2012 John Wiley & Sons, Ltd.     

Functionalization of Quinoxalines by Using TMP Bases: Preparation of Tetracyclic Heterocycles with High Photoluminescene Quantum Yields

Tetracyclic heterocycles that exhibit high photoluminescence quantum yields were synthesized by anellation reactions of mono‐, di‐, and trifunctionalized 2,3‐dichloroquinoxalines. Thus, treatment of 2,3‐dichloroquinoxaline with TMPLi (TMP=2,2,6,6‐tetramethylpiperidyl) allows a regioselective lithiation in position 5. Quenching with various electrophiles (iodine, (BrCl₂C)₂, allylic bromide, acid chloride, aryl iodide) leads to 5‐functionalized 2,3‐dichloroquinoxalines. Further functionalization in positions 6 and 8 can be achieved by using TMPLi or TMPMgCl ? LiCl furnishing a range of new di‐ and tri‐functionalized 2,3‐dichloroquinoxalines. The chlorine atoms are readily substituted by anellation with 1,2‐diphenols or 1,2‐dithiophenols leading to a series of new tetracyclic compounds. These materials exhibit strong, tunable optical absorption and emission in the blue and green spectral region. The substituted O‐heterocyclic compounds exhibit particularly high photoluminescence quantum yields of up to 90 %, which renders them interesting candidates for fluorescence imaging applications.     

Highly Enantioselective Synthesis of Indolines: Asymmetric Hydrogenation at Ambient Temperature and Pressure with Cationic Ruthenium Diamine Catalysts

A highly enantioselective synthesis of indolines by asymmetric hydrogenation of 1H‐indoles and 3H‐indoles at ambient temperature and pressure, catalyzed by chiral phosphine‐free cationic ruthenium complexes, has been developed. Excellent enantio‐ and diastereoselectivities (up to >99 % ee, >20:1 d.r.) were obtained for a wide range of indole derivatives, including unprotected 2‐substituted and 2,3‐disubstituted 1H‐indoles, as well as 2‐alkyl‐ and 2‐aryl‐substituted 3H‐indoles.     

Modular One‐Step Three‐Component Synthesis of Tetrahydroisoquinolines Using a Catellani Strategy

Reported is a modular one‐step three‐component synthesis of tetrahydroisoquinolines using a Catellani strategy. This process exploits aziridines as the alkylating reagents, through palladium/norbornene cooperative catalysis, to enable a Catellani/Heck/aza‐Michael addition cascade. This mild, chemoselective, and scalable protocol has broad substrate scope (43 examples, up to 90 % yield). The most striking feature of this protocol is the excellent regioselectivity and diastereoselectivity observed for 2‐alkyl‐ and 2‐aryl‐substituted aziridines to access 1,3‐cis‐substituted and 1,4‐cis‐substituted tetrahydroisoquinolines, respectively. Moreover, this is a versatile process with high step and atom economy.     

Hydriodic Acid‐Mediated Cyclization of α‐Substituted Secondary 2‐Ethenylbenzamides: Synthesis of 2‐Substituted 2,3‐Dihydro‐3,3‐dimethyl‐1H‐isoindol‐1‐ones and 3,3‐Disubstituted (E)‐1‐(Arylimino)‐1,3‐dihydroisobenzofurans

A new and facile method for the preparation of 2‐substituted 2,3‐dihydro‐3,3‐dimethyl‐1H‐isoindol‐1‐ones 3 and 3,3‐disubstituted (E)‐1‐(arylimino)‐1,3‐dihydroisobenzofurans 6 has been developed. Thus, treatment of N‐alkyl(or aryl)‐2‐(1‐methylethen‐1‐yl)benzamides 2 with concentrated hydriodic acid (HI) in MeCN at room temperature afforded 3 . Similar treatment of N‐aryl‐2‐(1‐phenylethen‐1‐yl)benzamide 5 with concentrated HI at 0° afforded 6 .     

3,4‐Bis(bromomethyl)thieno[2,3‐b]thiophene: Versatile Precursors for Novel Bis(triazolothiadiazines), Bis(quinoxalines), Bis(dihydrooxadiazoles), and Bis(dihydrothiadiazoles)

A synthesis of novel bis(triazolothiadiazines) 11 , 12 , 13 , 14 , bis(quinoxalines) 16 and 17 , bis(thiadiazoles) 24 and 25 , and bis(oxadiazole) 31 , which are linked to the thieno[2,3‐b]thiophene core via phenoxymethyl group, was reported. Thus, reaction of the bis(α‐bromoketones) 6 and 7 with the corresponding 4‐amino‐3‐mercapto‐1,2,4‐triazole derivatives 8 , 9 , 10 in ethanol–DMF mixture in the presence of a few drops of triethylamine as a catalyst under reflux afforded the novel bis(5,6‐dihydro‐s‐triazolo[3,4‐b]thiadiazines) 11 , 12 , 13 , 14 in 60–72% yields. The bis(quinoxalines) 16 and 17 were also synthesized as a sole product in high yields by the reaction of 6 and 7 with o‐phenylenediamine 15 in refluxing acetonitrile in the presence of piperidine as a catalyst. Cyclization of the bis(aldehyde thiosemicarbazones) 20 and 21 with acetic anhydride afforded the corresponding bis(4,5‐dihydro‐1,3,4‐thiadiazolyl) derivatives 24 and 25 in good yield. Bis(5‐phenyl‐2,3‐dihydro‐1,3,4‐oxadiazole) derivative 31 could be obtained in 67% yield by cyclization of the appropriate bis(N‐phenylhydrazone) 29 in refluxing acetic anhydride for 3 h.     

Synthesis of heterocyclic nitrogen derivatives from aryl‐1,4‐benzoquinones

Treatment of 2‐aryl‐3,6‐bis(arylamino)‐1,4‐benzoquinones 2a‐h with different acid chlorides, namely acetyl, phenylacetyl and chloroacetyl chloride yields 3a,7a‐dihydropyrrolo[2,3‐f]indole‐2,6‐dione 3, 5‐(N‐phenylacetylarylamino)‐3‐phenylindole‐2,6‐dione 4 and 3‐chloro‐5‐(N‐chloroacetylarylamino)indole‐2,6‐dione 5 respectively. Stirring 2‐aryl‐1,4‐benzoquinones ( 1 ) with ethylenediamine and/or o‐phenyl‐enediamine in methylene chloride gives pyrazino[2,3‐g]quinoxalines derivative 6 and/or tetrapentacene derivative 7 respectively. The products 5‐aryl‐ and 6‐aryl‐1/H‐indazole‐4,7‐diones 8 and 9 were obtained in the 1,3‐dipolar cycloaddition of diazomethane to ( 1 ).