A Green,Organometallic Catalyzed Synthesis of a Series of Novel Functionalized 4‐Aroyl‐4H‐benzo[g]chromenes through One‐pot,Three Component Reaction

A new series of 4‐aroyl‐4H‐benzo[g]chromene derivatives have been synthesized through an efficient, straightforward, and environmentally acceptable one‐pot, three component reaction of malononitrile, different arylglyoxals, and 2‐hydroxy‐1,4‐naphtoquinone (lawsone) in short reaction times and high to excellent yields. The zinc complex of amino acid L‐proline, that is, Zn[L‐proline]₂ has been prepared and used as highly active, recyclable, noncorrosive, and water soluble Lewis acid catalyst for this transformation.     

Zn(L‐proline)2 as an efficient and reusable catalyst for the multi‐component synthesis of pyran‐annulated heterocyclic compounds

We have developed a simple, straightforward and highly efficient multi‐component one‐pot synthesis of 2‐amino‐3‐cyano‐4H‐pyrans and pyran‐annulated heterocyclic compounds. Zn(L‐proline)₂ has been utilized as a mild and efficient Lewis acid catalyst for the three‐component reaction of aromatic aldehydes, malononitrile and enolizable C‐H acids or activated phenols to synthesize pyran‐annulated scaffolds. 3‐Methyl‐1‐phenyl‐2‐pyrazolin‐5‐one, 4‐hydroxycoumarine, dimedone, 4‐hydroxy‐6‐methyl‐2‐pyrone, resorcinol, 1‐naphthol and 2‐naphthol were used as activated C‐H acids. The products were isolated in high yields via vacuum filtration and without using any chromatography. The Zn(L‐proline)₂ was recovered and reused in another reaction (three times) without significant loss of activity.     

Rapid and cleaner synthesis of 1,4‐dihydropyridines in aqueous medium

The present investigation deals with a novel water soluble Lewis acid complex, Zn[(L)proline]₂ catalyzed Hantzsch 1,4‐dihydropyridine derivatives syntheses in aqueous medium assisted by microwave irradiation. The microwave promoted syntheses in aqueous medium afforded moderate to excellent yield (up to 98%) within short reaction time and allowed the reaction to take place with low microwave power (200 W). This synthetic methodology provides easier separation of products and the catalyst exhibits recycling ability without loss of its catalytic activity up to five reaction cycles. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:267–271, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20197     

Zinc (II), palladium (II) and cadmium (II) complexes containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline derivatives: Synthesis,characterization and methyl methacrylate polymerization

A series of Zn (II), Pd (II) and Cd (II) complexes, [(L) _n MX ₂ ] _m (L = L‐a–L‐c; M = Zn, Pd; X = Cl; M = Cd; X = Br; n, m = 1 or 2), containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline ( L‐a ), 4‐methoxy‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐b ) and 4‐methoxy‐N‐methyl‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐c ) have been synthesized and characterized. The X‐ray crystal structures of Pd (II) complexes [L ₁ PdCl ₂ ] (L = L‐b and L‐c) revealed distorted square planar geometries obtained via coordinative interaction of the nitrogen atoms of pyridine and amine moieties and two chloro ligands. The geometry around Zn (II) center in [(L‐a)ZnCl ₂ ] and [(L‐c)ZnCl ₂ ] can be best described as distorted tetrahedral, whereas [(L‐b) ₂ ZnCl ₂ ] and [(L‐b) ₂ CdBr ₂ ] achieved 6‐coordinated octahedral geometries around Zn and Cd centers through 2‐equivalent ligands, respectively. In addition, a dimeric [(L‐c)Cd(μ ‐ Br)Br] ₂ complex exhibited typical 5‐coordinated trigonal bipyramidal geometry around Cd center. The polymerization of methyl methacrylate in the presence of modified methylaluminoxane was evaluated by all the synthesized complexes at 60°C. Among these complexes, [(L‐b)PdCl ₂ ] showed the highest catalytic activity [3.80 × 10⁴ g poly (methyl methacrylate) (PMMA)/mol Pd hr^?1], yielding high molecular weight (9.12 × 10⁵ g mol^?1) PMMA. Syndio‐enriched PMMA (characterized using ¹H‐NMR spectroscopy) of about 0.68 was obtained with T_g in the range 120–128°C. Unlike imine and amine moieties, the introduction of N‐methyl moiety has an adverse effect on the catalytic activity, but the syndiotacticity remained unaffected.     

Bis[(L)prolinato‐N,O]Zn in acetic acid–water: a novel catalytic system for the synthesis of β‐amino carbonyls via Mannich reaction at room temperature

Zn[(L)proline]₂ was used as an efficient catalyst for the one‐pot multicomponent reactions (MCR) of different aromatic amines, aromatic aldehyde and ketones in aqueous media. This method provides a novel and improved method for obtaining stereoselective β‐amino carbonyl compounds in terms of good yield. Little catalyst loading, recyclability, easy accessibility of the catalyst and aqueous media are the main features of this protocol. Moreover column chromatography and recrystallization of product are not required as the crude product itself is very pure. Powder XRD and TEM images of the catalyst were taken for the first time. Copyright © 2011 John Wiley & Sons, Ltd.     

Ytterbium(III) triflate: An efficient and simple catalyst for isomerization of 2′‐hydroxychalcone and 2′‐aminochalcones in ionic liquid

Isomerization of 2′‐hydroxychalcone and 2′‐aminochalcone have been investigated using ytterbium(III) trifluromethanesulfonate {Yb(OTf)₃} (30 mol %) as Lewis acid catalyst in [bmim][BF₄] ionic liquid. The effect of different metal triflates as Lewis acid, catalyst loading and reaction media was studied for this isomerization reaction. Advantages of the methodology include short reaction time, excellent yields, catalytic use of Lewis acid, and recovery and reuse of the catalyst. J. Heterocyclic Chem., (2011).     

One‐Dimensional,Cofacial Porphyrin Polymers Formed by Self‐Assembly of meso‐Tetrakis(ERE Donor) Zinc(II) Porphyrins

A series of meso‐tetrakis‐(ERE donor) zinc(II) porphyrins n Zn (ERE donor=4‐R‐3,5‐bis[(E)‐methyl]phenyl; 1 Zn: E=NMe₂, R=Br; 2 Zn: E=NMe₂, R=H; 3 Zn: E=OMe, R=Br; 4 Zn: E=OMe, R=H) have been synthesized in excellent yields. As a result of the combination of a Lewis acidic site and eight Lewis basic sites within one molecule, monomeric molecules of n Zn self‐assemble to form one‐dimensional porphyrin polymers [ n Zn]_∞ in the solid state, as confirmed for 1 Zn and 3 Zn by X‐ray crystallography. The coordination environment around the zinc(II) ions in these polymers is octahedral. They are ligated by four equatorial nitrogen atoms of the porphyrin and two apical E atoms (E=N, O) provided by the EBrE donor groups of adjacent n Zn molecules. Complexes 2 Zn and 4 Zn did not form single crystals, but solid‐state UV/Vis analysis points to the formation of similar structures. Solution UV/Vis and ¹H NMR spectroscopy indicated that interactions between 1 Zn and 2 Zn monomers in the polymers are stronger than between 3 Zn and 4 Zn monomers. Interestingly, they also revealed that the presence of a neighboring bromine atom in the EBrE donor groups has a considerable influence on the coordination properties of the benzylic N or O atoms. The zinc(II) ions of the porphyrins most likely adopt only hexacoordination in the solid state, owing to the unique predisposition of Lewis acidic and basic sites in the n Zn molecules. Several parameters of the aggregates, for example, the interplanar separation between porphyrins and the zinc–zinc distances, change as a function of the coordinating E groups. The high degree of modularity in their synthesis makes these zinc(II) porphyrins an interesting new entry in noncovalent multiporphyrin assemblies.     

Nano‐Zn[2‐boromophenylsalicylaldiminemethylpyranopyrazole]Cl2 as a novel nanostructured Schiff base complex and catalyst for the synthesis of pyrano[2,3‐d]pyrimidinedione derivatives

Nano‐Zn[2‐boromophenylsalicylaldiminemethylpyranopyrazole]Cl₂ (nano‐[Zn‐2BSMP]Cl₂) as a novel nanostructured Schiff base complex was prepared and characterized using several techniques. Nano‐[Zn‐2BSMP]Cl₂ was used as an effective catalyst for the preparation of some pyrano[2,3‐d]pyrimidinedione derivatives by the multicomponent reaction of malononitrile, aryl aldehydes and barbituric acid derivatives. The novelty and efficiency of nano‐[Zn‐2BSMP]Cl₂ as a catalyst, in comparison with some other reported catalysts, for this synthetic transformation are the main features of this work.     

Zn( L‐proline)2 as a powerful and reusable organometallic catalyst for the very fast synthesis of 2‐amino‐4H‐benzo[g]chromene derivatives under solvent‐free conditions

An efficient route for the synthesis of 2‐amino‐4H‐benzo[g]chromenes via a three‐component coupling reaction of aldehydes, malononitrile and 2‐hydroxy‐1,4‐naphthaquinone in the presence of Zn( L ‐proline)₂ is reported. High yields, short reaction times, non‐toxicity and recyclability of the catalyst, and easy work‐up are the main merits of this protocol. Copyright © 2015 John Wiley & Sons, Ltd.     

Solvent‐ and Temperature‐Controlled In Situ Ligand Reactions Mediated by CuII and 3′‐[(E)‐{[(1S,2S)‐2‐Aminocyclohexyl]imino}methyl]‐4′‐hydroxy‐4‐biphenylcarboxlic Acid

Three new compounds, CuL, CuL′, and Cu₂O₂L′′₂ (H₂L=3′‐[(E)‐{[(1S,2S)‐2‐aminocyclohexyl]imino}methyl]‐4′‐hydroxy‐4‐biphenylcarboxlic acid, H₂L′=3′‐[(E)‐{[(1S,2S)‐2‐aminocyclohexyl]imino}methyl]‐4′‐hydroxy‐5′‐nitro‐4‐biphenylcarboxlic acid, H₂L′′=3′‐(N,N‐dimethylamino methyl)‐4′‐hydroxy‐4‐biphenylcarboxlic acid), were selectively synthesized through a controlled in situ ligand reaction system mediated by copper(II) nitrate and H₂L. Selective nitration was achieved by using different solvent mixtures under relatively mild conditions, and an interesting and economical reductive amination system in DMF/EtOH/H₂O was also found. All crystal structures were determined by single‐crystal X‐ray diffraction analysis. Both CuL and CuL′ display chiral 1D chain structures, whereas Cu₂O₂L′′₂ possesses a structure with 13×16 Å channels and a free volume of 41.4 %. The possible mechanisms involved in this in situ ligand‐controlled reaction system are discussed in detail.     

Experimental and Theoretical Studies on the Bismuth‐Triflate‐Catalysed Cycloisomerisation of 1,6,10‐Trienes and Aryl Polyenes

Cycloisomerisation of polyenes such as diethyl geranylprenylmalonate [(E)‐ 1 a ], diethyl geranylphenylmalonate [(E)‐ 2 a ] and diethyl cinnamylgeranylmalonate [(E,E)‐ 3 a ] catalysed by bismuth triflate was studied from experimental and theoretical viewpoints. Several intermediates were isolated and characterised, and calculated transition‐state structures are proposed for the three reactions. The diastereoselectivity observed during the reaction of (E)‐ or (Z)‐ 2 a in favour of the formation of trans‐fused bicyclic products is discussed in detail. The nature of the active catalytic species derived from bismuth triflate was also investigated, and the formation of a hybrid Lewis acid/Brønsted acid catalyst with water molecules is proposed, supported by experimental and theoretical data.     

A new one‐dimensional ZnII coordination polymer based on 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate

Multidentate N‐heterocyclic compounds form a variety of metal complexes with many intriguing structures and interesting properties. The title coordination polymer, catena‐poly[zinc(II)‐bis{μ‐2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole}‐κ²N³:N^3′;N^3′:N³‐zinc(II)‐bis(μ‐benzene‐1,2‐dicarboxylato)‐κ²O¹:O²;κ³O¹,O^1′:O²], [Zn₂(C₈H₄O₄)₂(C₁₁H₁₀N₄)₂]_n, has been synthesized by the reaction of Zn(NO₃)₂ with 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole (imb) and benzene‐1,2‐dicarboxylic acid (H₂bdic) under hydrothermal conditions. There are two crystallographically distinct imb ligands [imb(A) and imb(B)] in the structure which adopt very similar coordination geometries. The imb(A) ligand bridges two symmetry‐related Zn1 ions, yielding a binuclear [(Zn1)₂{imb(A)}₂] unit, and the imb(B) ligand bridges two symmetry‐related Zn2 ions resulting in a binuclear [(Zn2)₂{imb(B)}₂] unit. The above‐mentioned binuclear units are further connected alternately by pairs of bridging bdic²⁻ ligands, forming an infinite one‐dimensional chain. These one‐dimensional chains are further connected through N—H...O hydrogen bonds, leading to a two‐dimensional layered structure. In addition, the title polymer exhibits good fluorescence properties in the solid state at room temperature.     

Synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones using nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl2 nanoparticles

Nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl₂ (nano‐[Zn‐2BSMP]Cl₂) as a nanoparticle Schiff base complex and a catalyst was introduced for the solvent‐free synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones by the multicomponent condensation reaction of various aromatic aldehydes, β‐naphthol, ethyl acetoacetate, and phenyl hydrazine at room temperature.     

Di‐nuclear zinc complexes containing tridentate imino‐benzotriazole phenolate derivatives as efficient catalysts for ring‐opening polymerization of cyclic esters and copolymerization of phthalic anhydride with cyclohexene oxide

Zinc catalysts incorporated by imino‐benzotriazole phenolate ( IBTP ) ligands were synthesized and characterized by single‐crystal X‐ray structure determinations. The reaction of the ligand precursor ( ^C1DMeIBTP ‐H or ^C1DIPIBTP ‐H) with diethyl zinc (ZnEt₂) in a stoichiometric proportion in toluene furnished the di‐nuclear ethyl zinc complexes [(μ‐ ^C1DMeIBTP )ZnEt]₂ ( 1 ) and [(μ‐ ^C1DIPIBTP )ZnEt]₂ ( 2 ). The tetra‐coordinated monomeric zinc complex [( ^C1PhIBTP )₂Zn] ( 3 ) or [( ^C1BnIBTP )₂Zn] ( 4 ) resulted from treatment of ^C1PhIBTP ‐H or ^C1BnIBTP ‐H as the pro‐ligand under the similar synthetic method with ligand to metal precursor ratio of 2:1. Single‐crystal X‐ray diffraction of bimetallic complexes 1 and 2 indicates that the ^C1DMeIBTP or ^C1DIPIBTP fragment behaves a NON‐tridentate ligand to coordinate two metal atoms. Catalysis for ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL), β‐butyrolactone (β‐BL), and lactide (LA) of complexes 1 and 2 was systematic studied. In combination with 9‐anthracenemethanol (9‐AnOH), Zn complex 1 was found to polymerize ε‐CL, β‐BL, and L‐LA with efficient catalytic activities in a controlled character. This study also compared the reactivity of these ROP monomers with different ring strains by Zn catalyst 1 in the presence of 9‐AnOH. Additionally, Zn complex 1 combining with benzoic acid was demonstrated to be an active catalytic system to copolymerize phthalic anhydride and cyclohexene oxide. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 714–725     

Efficient Synthesis of 3,3‐diaryloxindoles Catalyzed by L‐prolinate Anion Immobilized onto Amberlite as a Novel Heterogeneous Organocatalyst

L‐prolinate anion immobilized onto amberlite IRA900OH ([Amb]L‐Prolinate) is reported as a new, reusable and cheap organocatalyst for the condensation of indoles with isatins to afford the corresponding 3,3′‐diaryloxindol derivatives in ethanol under reflux condition. [Amb]L‐Prolinate was achieved by the treatment of a MeOH/H₂O solution of L‐proline with amberlite IRA900OH at 60 °C. The procedure for heterogenization of L‐proline organocatalyst is based on non‐covalent ion‐pair immobilization of L‐proline on the surface of anion‐exchange resin amberlite IRA900OH (AmbIRA900OH) as a commercially accessible cationic polymer support. The prepared heterogeneous organocatalyst was well characterized by using of FTIR, TGA, DTG, XRD and elemental analysis techniques. The catalytic activity of the catalyst was also examined in the reaction of indole and isatin. The catalyst has been recovered and its reusability confirmed in 8 runs     

A density functional theory study on lewis acid‐catalyzed transesterification of β‐oxodithioesters

The detailed mechanisms of the Lewis acid‐catalyzed transesterification of β‐oxodithioesters at a solvent‐free condition were studied using density functional theory. Five possible reaction pathways, including one noncatalyzed (channel 1) and four Lewis acid‐catalyzed channels (SnCl₂‐catalyzed channels 2 and 3 and SnCl₂·2H₂O‐catalyzed channels 4 and 5), were investigated. Our calculated results indicate that the energy barriers of the catalyzed channels are significantly lower than that of channel 1. Channel 5, which has an energy barrier of 33.70 kcal/mol as calculated at the B3LYP/[6‐31G(d, p)+LANL2DZ] level, is the most energy‐favorable channel. Moreover, one water molecule of SnCl₂·2H₂O participated in the transesterification in channel 5. Thus, we report a novel function of the SnCl₂·2H₂O catalyst, which is quite different from the function of the conventional nonhydrated Lewis acid SnCl₂. To understand the function of these two Lewis acid catalysts better, the global reactivity indexes and natural bond orbital charge were analyzed. This work helps in understanding the function of the Lewis acid in transesterification, and it can provide valuable insight for the rational design of new Lewis acid catalysts. © 2014 Wiley Periodicals, Inc.     

A Planar‐Chiral Rhodium(III) Catalyst with a Sterically Demanding Cyclopentadienyl Ligand and Its Application in the Enantioselective Synthesis of Dihydroisoquinolones

The rapid development of enantioselective C?H activation reactions has created a demand for new types of catalysts. Herein, we report the synthesis of a novel planar‐chiral rhodium catalyst [(C₅H₂^tBu₂CH₂^tBu)RhI₂]₂ in two steps from commercially available [(cod)RhCl]₂ and tert‐butylacetylene. Pure enantiomers of the catalyst were obtained through separation of its diastereomeric adducts with natural (S)‐proline. The catalyst promoted enantioselective reactions of aryl hydroxamic acids with strained alkenes to give dihydroisoquinolones in high yields (up to 97 %) and with good stereoselectivity (up to 95 % ee).     

Ring‐opening polymerization of β‐butyrolactone catalyzed by efficient magnesium and zinc complexes derived from tridentate anilido‐aldimine ligand

Magnesium (Mg) and zinc (Zn) complexes incorporating tridentate anilido‐aldimine ligand, (E)‐2, 6‐diisopropyl‐N‐(2‐((2‐(piperidin‐1‐yl)ethylimino)methyl)phenyl)aniline ( AA ^Pip ‐H, 1 ), were synthesized and structurally characterized. The reaction of AA ^Pip ‐H ( 1 ) with MgⁿBu₂ or ZnEt₂ in equivalent proportions afforded the monomeric complex [( AA ^Pip )MgⁿBu] ( 2 ) or [( AA ^Pip )ZnEt] ( 3 ), respectively. The coordination modes of these complexes differ in the solid state: Mg complex 2 shows a four‐coordinated and distorted tetrahedral geometry, whereas Zn complex 3 adopts a trigonal planar geometry with a three‐coordinated Zn center. Complexes 2 and 3 are efficient catalysts for the ring‐opening polymerization of β‐butyrolactone (β‐BL) in the presence of 9‐anthracenemethanol (9‐AnOH). The polymerization of β‐BL with the Zn catalyst system is demonstrated in a living fashion with a narrow polydispersity index, PDI = 1.01–1.10. The number‐averaged molecular weight (M_n) of the produced poly(3‐hydroxybutyrate) (PHB) is quite close to the expected M_n over diverse molar ratios of monomer to 9‐AnOH. A greater ratio of monomer to alcohol catalyzed by Zn complex 3 served to form PHB with a large molecular weight (M_n > 60000). An effective method to prepare PHB‐b‐PCL and PEG‐b‐PHB by the ring‐opening copolymerization of β‐BL catalyzed by zinc complex 3 is reported. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Syntheses of new conformationally constrained S‐[2‐[(1‐iminoethyl)amino] ethyl]homocysteine derivatives as potential nitric oxide synthase inhibitors

The efficient syntheses of two new types of conformationally constrained S‐[2‐[(1‐iminoethyl)amino]ethyl]homocysteine derivatives, 1‐amino‐3‐[2[(1‐iminoethyl)amino]ethylthio]cyclobutane carboxylic Acid ( 5 ) and (4S)‐4‐[[2‐[(1‐Iminoethyl)amino]ethyl]thio]‐L‐proline ( 6 ), are reported. These molecules represent the first attempts to probe conformational constraint near the α‐amino acid moiety of known homocysteine‐based inhibitors of nitric oxide synthase. Targets 5 and 6 were evaluated as potential inhibitors of the three human isoforms of nitric oxide synthase. © 2002 John Wiley & Sons, Inc. Heteroatom Chem 13:77–83, 2002; DOI 10.1002/hc.1109     

Palladium‐Catalyzed Annulation of 1,2‐Diborylalkenes and ‐Arenes with 1‐Bromo‐2‐[(Z)‐2‐bromoethenyl]arenes: A Modular Approach to Multisubstituted Naphthalenes and Fused Phenanthrenes

(Z)‐1,2‐Diaryl‐1,2‐bis(pinacolatoboryl)ethenes underwent double‐cross‐coupling reactions with 1‐bromo‐2‐[(Z)‐2‐bromoethenyl]arenes in the presence of [Pd(PPh₃)₄] as a catalyst and 3 M aqueous Cs₂CO₃ as a base in THF at 80 °C. The double‐coupling reaction gave multisubstituted naphthalenes in good to high yields. Annulation of 1,2‐bis(pinacolatoboryl)arenes with bromo(bromoethenyl)arenes in the presence of a catalyst system that consisted of [Pd₂(dba)₃] (dba=dibenzylideneacetone) and 2‐dicyclohexylphosphino‐2′,6′‐dimethoxybiphenyl (SPhos) under the same conditions produced fused phenanthrenes in good to high yields. The first annulation coupling occurred regiospecifically at the bromoethenyl moiety. This procedure is applicable to the facile synthesis of polysubstituted anthracenes, benzothiophenes, and dibenzoanthracenes through a double annulation pathway by using the corresponding dibromobis[(Z)‐2‐bromoethenyl]benzenes as diboryl coupling partners.