Synthesis of Diverse Oxa‐Carbocycle‐Annulated Flavones Using the Combined Claisen Rearrangement and Ring‐Closing Metathesis

A simple and efficient route for the synthesis of oxepine‐, oxocine‐, oxepinone‐, and dioxocine‐angularly annulated flavone skeletons has been developed. The combined Claisen rearrangement and the ring‐closing metathesis are used as key steps for the construction of C₇/C₈–C₆–C₆ tricyclic core structures.     

A New Synthesis of Benzofurans from Phenols via Claisen Rearrangement and Ring‐Closing Metathesis

Based on Claisen rearrangement, the double bond isomerization of O‐allyl function together with the formation of O‐vinyl function in one pot, and ring‐closing metathesis (RCM), various phenols were transformed into various benzofurans in good yields.     

Total Synthesis of (+)‐Cryptocaryalactone and of a Diastereoisomer of (+)‐Strictifolione via Ring‐Closing Metathesis (RCM) and Olefin Cross‐Metathesis (CM)

Ring‐closing metathesis (RCM) and olefin cross‐metathesis (CM) reactions were used as the key steps for the synthesis of (+)‐cryptocaryalactone ( 1 ) and the first synthesis of the diastereoisomer 3 of (+)‐strictifolione, starting from the commercially available L ‐malic acid (=(2S)‐2‐hydroxybutanedioic acid).     

Synthesis of 3‐Aryl‐2,5‐Dihydro‐1‐Benzoxepines from Phenol via Ring‐Closing Metathesis

In this paper, the synthesis of 3‐aryl‐2,5‐dihydro‐1‐benzoxepines is described. While the reaction was started from phenol and based on the sequential reactions such as Claisen rearrangement, O‐alkylation, Wittig reaction, and ring‐closing metathesis (RCM), a series of new 3‐aryl‐1‐benzoxepines were prepared in good overall yields.     

Ring‐Closing Metathesis Reactions: Interpretation of Conversion–Time Data

Conversion–time data were recorded for various ring‐closing metathesis (RCM) reactions that lead to five‐ or six‐membered cyclic olefins by using different precatalysts of the Hoveyda type. Slowly activated precatalysts were found to produce more RCM product than rapidly activated complexes, but this comes at the price of slower product formation. A kinetic model for the analysis of the conversion–time data was derived, which is based on the conversion of the precatalyst (Pcat) into the active species (Acat), with the rate constant k_act, followed by two parallel reactions: 1) the catalytic reaction, which utilizes Acat to convert reactants into products, with the rate k_cat, and 2) the conversion of Acat into the inactive species (Dcat), with the rate k_dec. The calculations employ two experimental parameters: the concentration of the substrate (c(S)) at a given time and the rate of substrate conversion (?dc(S)/dt). This provides a direct measure of the concentration of Acat and enables the calculation of the pseudo‐first‐order rate constants k_act, k_cat, and k_dec and of k_S (for the RCM conversion of the respective substrate by Acat). Most of the RCM reactions studied with different precatalysts are characterized by fast k_cat rates and by the k_dec value being greater than the k_act value, which leads to quasistationarity for Acat. The active species formed during the activation step was shown to be the same, regardless of the nature of different Pcats. The decomposition of Acat occurs along two parallel pathways, a unimolecular (or pseudo‐first‐order) reaction and a bimolecular reaction involving two ruthenium complexes. Electron‐deficient precatalysts display higher rates of catalyst deactivation than their electron‐rich relatives. Slowly initiating Pcats act as a reservoir, by generating small stationary concentrations of Acat. Based on this, it can be understood why the use of different precatalysts results in different substrate conversions in olefin metathesis reactions.     

Enantioselective Synthesis of Macrocyclic Heterobiaryl Derivatives of Molecular Asymmetry by Molybdenum‐Catalyzed Asymmetric Ring‐Closing Metathesis

Winding vine‐shaped molecular asymmetry is induced by enantioselective ring‐closing metathesis with a chiral molybdenum catalyst. The reaction proceeds under mild conditions through an E‐selective ring‐closing metathesis leading to macrocyclic bisazoles with enantioselectivities of up to 96 % ee.     

Synthesis of Carbazole Alkaloids by Ring‐Closing Metathesis and Ring Rearrangement–Aromatization

Aprocess for the assembly of carbazole alkaloids has been developed on the basis of ring‐closing metathesis (RCM) and ringrearrangement–aromatization (RRA) as the key steps. This method is based on allyl Grignard addition to isatin derivatives to provide smooth access to 2,2‐diallyl 3‐oxindole derivatives through a 1,2‐allyl shift. The diallyl derivatives were used as RCM precursors to afford a novel class of spirocyclopentene‐3‐oxindole derivatives, which underwent a novel RRA reaction to afford carbazole derivatives. The synthetic sequence to carbazoles was shortened by combining the RCM and RRA steps in an orthogonal tandem catalytic process. The utility of this methodology was further demonstrated by the straightforward synthesis of carbazole alkaloids, including amukonal derivative, girinimbilol, heptaphylline, and bis(2‐hydroxy‐3‐methylcarbazole).     

Temporary Silicon‐Tethered Ring‐Closing Metathesis: Recent Advances in Methodology Development and Natural Product Synthesis

Temporary silicon‐tethered ring‐closing metathesis represents an important cross‐coupling strategy for the formation of medium‐sized silacycles. These intermediates are valuable synthons in organic synthesis due to their propensity to undergo a facile refunctionalization through protodesilylation, oxidation, silane‐group transfer or transmetallation. A particularly attractive utility of this methodology is an application in the synthesis of biologically important natural products. The purpose of this review article is to highlight the recent progress in methodology development and its strategic application toward the target‐directed synthesis.     

Tandem Ring‐Opening–Ring‐Closing Metathesis for Functional Metathesis Catalysts

Use of a tandem ring‐opening–ring‐closing metathesis (RORCM) strategy for the synthesis of functional metathesis catalysts is reported. Ring opening of 7‐substituted norbornenes and subsequent ring‐closing metathesis forming a thermodynamically stable 6‐membered ring lead to a very efficient synthesis of new catalysts from commercially available Grubbs’ catalysts. Hydroxy functionalized Grubbs’ first‐ as well as third‐generation catalysts have been synthesized. Mechanistic studies have been performed to elucidate the order of attack of the olefinic bonds. This strategy was also used to synthesize the ruthenium methylidene complex.     

Synthesis of C‐Butenyl Linked Disaccharides via Olefin Cross‐Metathesis

Several C‐butenyl linked disaccharides were pre pared in high yields by olefin cross‐metathesis.     

Formal Synthesis of (−)‐Cyclaradine Using Ring Closing Metathesis

The stereoselective formal synthesis of (?)‐cyclaradine from the inexpensively available starting material L ‐glutamic acid is described, using Eschenmoser's reagent, and applying Luche reduction, Grignard reaction, and ring closing metathesis (RCM) as the key steps.     

Phosphate‐Tether‐Mediated Ring‐Closing Metathesis for the Preparation of Complex 1,3‐anti‐Diol‐Containing Subunits

An array of examples of diastereoselective, phosphate‐tether‐mediated ring‐closing metathesis reactions, which highlight the importance of product ring size and substrate stereochemical compatibility, as well as complexity, is reported. Studies focus primarily on the formation of bicyclo[n.3.1]phosphates, involving the coupling of C₂‐symmetric dienediol subunits with a variety of simple, as well as complex, alcohol partners.     

An [(NHC)(NHCEWG)RuCl2(CHPh)] Complex for the Efficient Formation of Sterically Hindered Olefins by Ring‐Closing Metathesis

NHC with EWGs for RCM : Ruthenium complexes with two N‐heterocyclic carbenes (NHCs), one of them substituted with electron‐withdrawing groups (EWGs), are highly efficient (pre)catalysts for the synthesis of tetrasubstituted olefins and trisubstituted olefins by ring‐closing metathesis reactions (RCM, see scheme).

     

[(NHC)(NHCewg)RuCl2(CHPh)] Complexes with Modified NHCewg Ligands for Efficient Ring‐Closing Metathesis Leading to Tetrasubstituted Olefins

Imidazolium salts (NHC_ewg ? HCl) with electronically variable substituents in the 4,5‐position (H,H or Cl,Cl or H,NO₂ or CN,CN) and sterically variable substituents in the 1,3‐position (Me,Me or Et,Et or iPr,iPr or Me,iPr) were synthesized and converted into the respective [AgI(NHC)_ewg] complexes. The reactions of [(NHC)RuCl₂(CHPh)(py)₂] with the [AgI(NHC_ewg)] complexes provide the respective [(NHC)(NHC_ewg)RuCl₂(CHPh)] complexes in excellent yields. The catalytic activity of such complexes in ring‐closing metathesis (RCM) reactions leading to tetrasubstituted olefins was studied. To obtain quantitative substrate conversion, catalyst loadings of 0.2–0.5 mol % at 80 °C in toluene are sufficient. The complex with the best catalytic activity in such RCM reactions and the fastest initiation rate has an NHC_ewg group with 1,3‐Me,iPr and 4,5‐Cl,Cl substituents and can be synthesized in 95 % isolated yield from the ruthenium precursor. To learn which one of the two NHC ligands acts as the leaving group in olefin metathesis reactions two complexes, [(FL‐NHC)(NHC_ewg)RuCl₂(CHPh)] and [(FL‐NHC_ewg)(NHC)RuCl₂(CHPh)], with a dansyl fluorophore (FL)‐tagged electron‐rich NHC ligand (FL‐NHC) and an electron‐deficient NHC ligand (FL‐NHC_ewg) were prepared. The fluorescence of the dansyl fluorophore is quenched as long as it is in close vicinity to ruthenium, but increases strongly upon dissociation of the respective fluorophore‐tagged ligand. In this manner, it was shown for ring‐opening metathesis ploymerization (ROMP) reactions at room temperature that the NHC_ewg ligand normally acts as the leaving group, whereas the other NHC ligand remains ligated to ruthenium.     

Asymmetric Synthesis of Densely Functionalized Medium‐Ring Carbocycles and Lactones through Modular Assembly and Ring‐Closing Metathesis of Sulfoximine‐Substituted Trienes and Dienynes

An asymmetric synthesis of densely functionalized 7–11‐membered carbocycles and 9–11‐membered lactones has been developed. Its key steps are a modular assembly of sulfoximine‐substituted C‐ and O‐tethered trienes and C‐tethered dienynes and their Ru‐catalyzed ring‐closing diene and enyne metathesis (RCDEM and RCEYM). The synthesis of the C‐tethered trienes and dienynes includes the following steps: 1) hydroxyalkylation of enantiomerically pure titanated allylic sulfoximines with unsaturated aldehydes, 2) α‐lithiation of alkenylsulfoximines, 3) alkylation, hydroxy‐alkylation, formylation, and acylation of α‐lithioalkenylsulfoximines, and 4) addition of Grignard reagents to α‐formyl(acyl)alkenylsulfoximines. The sulfoximine group provided for high asymmetric induction in steps 1) and 4). RCDEM of the sulfoximine‐substituted trienes with the second‐generation Ru catalyst stereoselectively afforded the corresponding functionalized 7–11‐membered carbocyles. RCDEM of diastereomeric silyloxy‐substituted 1,6,12‐trienes revealed an interesting difference in reactivity. While the (R)‐diastereomer gave the 11‐membered carbocyle, the (S)‐diastereomer delivered in a cascade of cross metathesis and RCDEM 22‐membered macrocycles. RCDEM of cyclic trienes furnished bicyclic carbocycles with a bicyclo[7.4.0]tridecane and bicyclo[9.4.0]pentadecane skeleton. Selective transformations of the sulfoximine‐ and bissilyloxy‐substituted carbocycles were performed including deprotection, cross‐coupling reaction and reduction of the sulfoximine moiety. Esterification of a sulfoximine‐substituted homoallylic alcohol with unsaturated carboxylic acids gave the O‐tethered trienes, RCDEM of which yielded the sulfoximine‐substituted 9–11‐membered lactones. RCEYM of a sulfoximine‐substituted 1,7‐dien‐10‐yne showed an unprecedented dichotomy in ring formation depending on the Ru catalyst. While the second‐generation Ru catalyst gave the 9‐membered exo 1,3‐dienyl carbocycle, the first‐generation Ru catalyst furnished a truncated 9‐membered 1,3‐dieny carbocycle having one CH₂ unit less than the dienyne.     

Low Catalyst Loading in Ring‐Closing Metathesis Reactions

An efficient procedure is described for ring‐closing metathesis reactions. A conversion of 95 % for diethyl diallylmalonate in dilute solution could be achieved within a few minutes, reaching TOF=4173 min^?1, with very low loading of commercially available Ru catalysts that contained unsaturated NHC ligands. In general, only 50 to 250 ppm of the catalyst is required to achieve near‐quantitative conversion into a broad variety of 5–16‐membered heterocyclic compounds. The practicality of this procedure was illustrated in the synthesis of 5–8‐membered N‐tert‐butoxycarbonyl (N‐Boc)‐ and N‐para‐toluenesulfonyl (N‐Ts)‐protected cyclic amines and 9–16‐membered lactones. The synthesis of macrocyclic proline‐based lactams required slightly higher catalyst loadings. Along with monocyclic products, oligomeric byproducts, mostly cyclodimers, were isolated and characterized.