Convenient access to substituted acridines by a Buchwald-Hartwig amination

A convenient, high yield procedure for the synthesis of anthranilic acids carrying a variety of different substituents as well as their straightforward transformation into the corresponding 9-chloroacridines could be established by using modified Buchwald-Hartwig amination conditions.     

Ethylene polymerization with long‐lifetime monopendant thienyl‐substituted group 4 metallocenes

A series of group 4 metallocenes (RCp)[Cp―(bridge)―(2‐C₄H₃S)]MCl₂ [M = Ti ( C1 , C2 , C3 , C4 ); M = Zr ( C5 , C6 , C7 , C8 )] bearing a pendant thiophene group on a cyclopentadienyl ring have been synthesized, characterized and tested as catalyst precursors for ethylene polymerization. The molecular structures of representative titanocenes C2 and C4 were confirmed by single‐crystal X‐ray diffraction and revealed that both complexes exist in an expected coordination environment for a monomeric bent metallocene. No intramolecular coordination between the thiophene group and the titanium center could be observed in the solid state. Upon activation by methylaluminoxane (MAO), titanocenes C1 , C2 , C3 , C4 showed moderate catalytic activities and produced high‐ or ultra‐high‐molecular‐weight polyethylene (M_v 70.5–227.1 × 10⁴ g mol^?1). Titanocene C3 is more active and long‐lived, with a lifetime of nearly 9 h at 30 °C. At elevated temperatures of 80–110 °C, zirconocenes C5 , C6 , C7 , C8 displayed high catalytic activities (up to 27.6 × 10⁵ g PE (mol Zr)^?1 h^?1), giving high‐molecular‐weight polyethylene (M_v 11.2–53.7 × 10⁴ g mol^?1). Even at 80 °C, a long lifetime of at least 2 h was observed for the C8/MAO catalyst system. Copyright © 2014 John Wiley & Sons, Ltd.     

Different hydrogen‐bonded structures in three 2‐thienyl‐substituted tetrahydro‐1,4‐epoxy‐1‐benzazepines

The molecules of (2RS,4SR)‐2‐exo‐(5‐bromo‐2‐thienyl)‐7‐chloro‐2,3,4,5‐tetrahydro‐1H‐1,4‐epoxy‐1‐benzazepine, C₁₄H₁₁BrClNOS, (I), are linked into cyclic centrosymmetric dimers by C—H...π(thienyl) hydrogen bonds. Each such dimer makes rather short Br...Br contacts with two other dimers. In (2RS,4SR)‐2‐exo‐(5‐methyl‐2‐thienyl)‐2,3,4,5‐tetrahydro‐1H‐1,4‐epoxy‐1‐benzazepine, C₁₅H₁₅NOS, (II), a combination of C—H...O and C—H...π(thienyl) hydrogen bonds links the molecules into chains of rings. A more complex chain of rings is formed in (2RS,4SR)‐7‐chloro‐2‐exo‐(5‐methyl‐2‐thienyl)‐2,3,4,5‐tetrahydro‐1H‐1,4‐epoxy‐1‐benzazepine, C₁₅H₁₄ClNOS, (III), built from a combination of two independent C—H...O hydrogen bonds, one C—H...π(arene) hydrogen bond and one C—H...π(thienyl) hydrogen bond.     

Convenient synthesis of novel 5‐substituted 3‐methylisoxazole‐4‐sulfonamides

A number of novel sulfonamide derivatives of 5‐substituted‐3‐methylisoxazole were synthesized and characterized, starting from 3,5‐dimethylisoxazole. Key steps include the generation of 3,5‐dimethylisoxazole‐4‐sulfonamides followed by their reactions with N‐(dimethoxymethyl)‐N,N‐dimethylamine or various aromatic and heteroaromatic aldehydes. As a result, a series of novel aryl/heteroaryl‐ and aminovinylsubstituted derivatives of the isoxazole heterocycle were obtained. The scope and limitations of the developed approach are discussed.     

Regioselective 5‐endo‐dig Electrophilic Iodocyclization of Enediynes: A Convenient Route to Iodo‐substituted Indenes and Cyclopenta‐Fused Arenes

An efficient iodine‐mediated regioselective tandem approach for the synthesis of symmetric and asymmetric iodo‐substituted indenes and stereoselective cyclopenta [b]pyridine/thiophenes from easily accessible enediynes that proceeds by in situ formation of an iodonium intermediate followed by a regioselective 5‐endo‐dig cyclization has been described. The intramolecular electrophilic iodocyclization was selectively triggered by a distribution of electronic density along the alkyne bond. Subsequently, the iodo‐substituted indenes were diversified by employing palladium‐catalyzed cross‐coupling reactions and the coupled products were further confirmed by X‐ray crystallographic studies.     

Convenient access to C-2 or C-5 substituted 4-azaindole derivatives

Functionalization at C-2 and C-5 of N-benzenesulfonyl-4-azaindole 1 was performed by lithiation reactions and original palladium-catalyzed chemistry. It led to very useful new substituted 4-azaindole derivatives in fair to high yields.     

Convenient synthesis of some new substituted pyrazolyl‐1,3,4‐oxadiazoles and pyrazolyl‐1,2,4‐triazoles

A simple and versatile method for the synthesis of pyrazol‐3‐yl‐1,3,4‐oxadiazole, pyrazol‐3‐yl‐1,2,4‐triazole, (1,5‐diphenylpyrazol‐3‐yl)‐(3,5‐dimethyl‐1‐carbonyl)pyrazole and (1,5‐diphenylpyrazol‐3‐yl)‐(5‐hydroxy‐3‐metheyl‐1‐carbonyl)pyrazole derivatives from 1,5‐diphenylpyrazole‐3‐carboxylic acid hydrazide has been developed.     

Convenient synthesis of N‐substituted 1‐alkyl and 1‐aryl‐3‐aminoisoquinolines

Cyclocondensation of 2‐acylphenylacetonitriles 1 with amines affords 1‐substituted 3‐aminoisoquinolines 2 in good yields.     

A Convenient and Efficient Approach for the Synthesis of New 2‐N‐substituted 2,5‐dihydrofuran‐3‐carboxamides

In order to obtain potent biological active compounds, a convenient and efficient method for the synthesis of compounds comprising 2‐imino‐2,5‐dihydrofuran, aromatic, sulfamoyl, and heterocyclic fragments has been presented. This environmentally friendly method was based on the reaction of 2‐imino‐2,5‐dihydrofuran‐3‐carboxamides with analgesic and sulfanilamide drugs and 4‐aminoantipyrine in glacial acetic acid and afforded high yields of the products.     

Convenient access to functionalized vinylcyclopentenols from alkynyloxiranes

Beta,gamma-alkynyl aldehydes, generated in situ by treatment of alkynyloxiranes with a catalytic amount of Sc(OTf)3 or BF3.OEt2, are effectively trapped by a variety of allyl nucleophiles to afford homopropargylic homoallylic alcohols in good yield and selectivity. Such products are used as substrates for the synthesis of functionalized vinylcyclopentenols via enyne metathesis.     

Coordination complexes of 2‐thienyl‐ and 2‐furyl‐mercurials

The reactions of di(2‐thienyl)mercury, 2‐thienylmercury chloride and 2‐furylmercury chloride with a variety of nitrogen‐ and phosphorus‐containing ligands have been studied. The presence of the electron‐withdrawing heteroatoms results in these mercurials being stronger acceptors than the corresponding phenylmercury compounds. The complexes have been characterized by elemental analysis, melting points, infrared, and ¹⁹⁹Hg NMR spectroscopy. 2,9‐Dimethyl‐ and 3,4,7,8‐tetramethyl‐phenanthroline form 1:1 chelate complexes, as does 1,2‐bis(diphenylphosphino)ethane, whereas ethylenediamine and 2,2′‐bipyridyl do not form complexes. Though non‐chelating ligands such as 2,4′‐ and 4,4′‐bipyridyl do not form complexes, bis(diphenylphosphino)methane forms 1:2 complexes in which the ligand bridges two mercury atoms. Monodentate ligands, such as triphenylphosphine, cause disproportionation of the organomercury chloride. 2‐Thienylmercury chloride forms a 4:1 complex with 4,4′‐dipyridyl disulfide in which it is believed that a molecule of the organomercurial is coordinated to both of the nitrogen and both of the sulfur atoms. Copyright © 2004 John Wiley & Sons, Ltd.     

Convenient access to bicyclic and tricyclic diazenes

Heating the tosylhydrazone of an omega-alkenyl ketone or aldehyde to reflux in toluene in the presence of K(2)CO(3) delivered the bicyclic diazene. Irradiation of the diazene converted it to the cyclopropane. This appears to be a generally useful method for the construction of substituted cyclopentanes and cyclohexanes.     

Three closely related thienyl‐substituted 1,4‐epoxynaphtho[1,2‐b]azepines: hydrogen‐bonded assembly in one,two and three dimensions

(2R,4S)‐2‐(3‐Methylthiophen‐2‐yl)‐2,3,4,5‐tetrahydro‐1,4‐epoxynaphtho[1,2‐b]azepine, C₁₉H₁₇NOS, (I), crystallizes with a single enantiomer in each crystal, whereas its geometrical isomer (2RS,4SR)‐2‐(5‐methylthiophen‐2‐yl)‐2,3,4,5‐tetrahydro‐1,4‐epoxy‐naphtho[1,2‐b]azepine, (II), and (2RS,4SR)‐2‐(5‐bromothiophen‐2‐yl)‐2,3,4,5‐tetrahydro‐1,4‐epoxynaphtho[1,2‐b]azepine, C₁₈H₁₄BrNOS, (III), both crystallize as racemic mixtures. A combination of one C—H...O hydrogen bond and two C—H...π(arene) hydrogen bonds links the molecules of (I) into a three‐dimensional framework; the molecules of (II) are linked into a C(4)C(4)[R₂²(7)] chain of rings by a combination of C—H...N and C—H...O hydrogen bonds; and in (III), where Z′ = 2, a combination of four C—H...π(arene) hydrogen bonds and two C—H...π(thienyl) hydrogen bonds links the molecules into complex sheets. Comparisons are made with the assembly patterns in some aryl‐substituted 1,4‐epoxynaphtho[1,2‐b]azepines.     

Convenient synthesis of some 2‐substituted 4(3H)‐quinazolinone derivatives

A series of 2‐substituted‐4(3H)‐quinazolinones 13‐20 has been synthesized in good yields using the reaction of double lithiated 2‐methylquinazolinone‐4 with a variety of aromatic aldehydes. They have been easily transformed in high yields into the corresponding 2‐substituted conjugated derivatives 21‐28 bearing terminal aryl groups by F₃CCOOH mediated dehydration.     

Convenient access to bis-indole alkaloids. Application to the synthesis of topsentins

Topsentins and related bis-indole alkaloids may be efficiently synthesized through an addition/oxidation sequence leading to 2-(3-indolylcarbonyl)-imidazole derivatives followed by a Pd-catalyzed heteroarylation with the appropriate 3-stannylindoles.     

Convenient way to 5‐substituted 4‐amino‐2,3‐dihydro‐4H‐1,2,4‐triazole‐3‐thiones

Various 4‐amino‐2,3‐dihydro‐4H‐triazoles with aromatic, aliphatic and heterocyclic substituents at the C(5) position were synthesized from corresponding esters and thiocarbohydrazide. This method allows the synthesis these heterocycles in a short time and at reduced expenses.     

Synthesis of thiophene/phenylene co‐oligomers. III . thienyl‐capped oligophenylenes

The author reports the synthesis of thienyl‐capped oligophenylenes via improved synthetic schemes. These schemes are based on either the Grignard or Suzuki coupling reaction and enable the author to obtain the target compounds at appreciably high yields. Regarding several of these compounds, their synthesis and characterization are believed to be reported for the first time. The resulting materials have been fully characterized through the nmr and ir spectroscopy. The ir analysis is particularly useful in characterizing the materials of higher molecular weight, since those materials are difficult to dissolve in organic solvents.     

A photochemical route to ferrocenyl‐substituted ferrapyrrolinone complexes

In the presence of iron pentacarbonyl, photochemical reaction between phenylisocyanate and ferrocenylacetylene results in ferrapyrrolinone complex [Fe₂(CO)₆(μ₂‐η³‐FcC═C(H)C(O)NPh)] ( 1 ) and maleimide 3‐ferrocenyl‐1‐phenyl‐1H ‐pyrrole‐2,5‐dione ( 2 ). Under similar experimental conditions, ferrocenyl−/phenyl‐substituted butadiyne primarily shows the activation of only one C☰C bond and results in ferrapyrrolinone complexes [Fe₂(CO)₆(μ₂‐η³‐FcC═C(C☰CR)C(O)NPh)] ( 3 , R = Fc; 3a , R = Ph), maleimides 3‐ferrocenyl‐1‐phenyl‐4‐(ferrocenylethynyl)‐1H –pyrrole‐2,5‐dione ( 5 ) and 3‐ferrocenyl‐1‐phenyl‐4‐(phenylethynyl)‐1H –pyrrole‐2,5‐dione ( 5a ) and [Fe₂(CO)₆(μ₂‐η³‐FcC═C(R)C(O)NPh)] ( 4 ; R  = 3‐ferrocenyl‐1‐phenyl‐1H ‐pyrrole‐2,5‐dione). Compound 4 consists of ferrapyrrolinone and a maleimide unit, formed by the activation of both C☰C bonds of diferrocenylbutadiyne. Activation of both C☰C bonds in a substituted butadiyne is a rare observation. Formation of the ferrapyrrolinone compounds is an advance over the earlier reported methods which generally use internal alkynes and involve prior synthesis of other clusters.