5,5′‐Di‐tert‐butyl‐2,2′‐di­hydroxy‐3,3′‐methyl­enedibenz­aldehyde and 6,6′‐di‐tert‐butyl‐8,8′‐methyl­ene­bis­(spiro­[4H‐1,3‐benzodioxin‐2,1′‐cyclo­hexane])

Two related compounds containing p‐tert‐butyl‐o‐methyl­ene‐linked phenol or phenol‐derived subunits are described, namely 5,5′‐di‐tert‐butyl‐2,2′‐di­hydroxy‐3,3′‐methyl­ene­di­benz­aldehyde, C₂₃H₂₈O₄, (I), and 6,6′‐di‐tert‐butyl‐8,8′‐methyl­ene­bis­(spiro­[4H‐1,3‐benzo­di­oxin‐2,1′‐cyclo­hexane]), C₃₅H₄₈O₄, (II). Both compounds adopt a `butterfly' shape, with the two phenol or phenol‐derived O atoms in distal positions. Phenol and aldehyde groups in (I) are involved in intramolecular hydrogen bonds and the two dioxin rings in (II) are in distorted half‐chair conformations.     

Synthesis and micropatterning properties of a novel base‐soluble,positive‐working,photosensitive polyimide having an o‐nitrobenzyl ether group

A novel positive‐working, photosensitive polyimide, poly[1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐di(2‐nitrobenzyloxy)benzophenone‐3,3′,4,4′‐tetracarboxdiimide] (OPI‐Nb), developable with an aqueous base was prepared by the o‐nitrobenzylation of a polyimide, poly(1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐dihydroxybenzophenone‐3,3′,4,4′‐tetracarboxdiimide) (OPI), derived from 2,2′‐dihydroxy‐3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (DHBA) and 4,4′‐oxydianiline, and it micropatterning properties were investigated. The o‐nitrobenzylation of OPI to OPI‐Nb was conducted with o‐nitrobenzyl bromide in N‐methyl‐2‐pyrrolidinone containing Et₃N. The DHBA monomer was synthesized by exhaustive KMnO₄ oxidation of bis(2‐dimethoxy‐3,4‐dimethylphenyl)methane obtained by etherification of bis(2‐hydroxy‐3,4‐dimethylphenyl)methane with iodomethane, followed by deprotection of the methoxy groups and cyclodehydration of the obtained 2,2′‐dihydroxy‐3,3′4,4′‐benzophenonetetracarboxylic acid. The intermediate bis(2‐hydroxy‐3,4‐dimethylphenyl)methane was prepared by the condensation of 2,3‐dimethylphenol with paraformaldehyde. The degree of o‐nitrobenzylation was determined to be over 94 mol % from ¹H NMR absorption of benzylic CH₂ protons. The aromatic OPI was perfectly soluble in a dilute aqueous NaOH solution and tetramethylammonium hydroxide (TMAH), whereas OPI‐Nb was not even swellable in them. In the micropatterning process, OPI‐Nb showed a line‐width resolution of 0.4‐μm and a sensitivity of 5.4 J/cm² when its thin films were irradiated with 365‐nm light and developed with a 2.38% aqueous TMAH solution at room temperature for 90 s. The thickness loss of OPI‐Nb films measured after postbaking at 350 °C was in the 8–9% range. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 776–788, 2007     

Design,Synthesis and Biological Evaluation of Novel N‐(4‐([2,2′:5′,2′′‐Terthiophen]‐5‐yl)‐2‐methylbut‐3‐yn‐2‐yl) Benzamide Derivatives

On the basis of the principle of combination of active groups, a series of novel N‐(4‐([2,2′:5′,2′′‐terthiophen]‐5‐yl)‐2‐methylbut‐3‐yn‐2‐yl) benzamide derivatives were designed, synthesized and systematically evaluated for their antiviral activity against tobacco mosaic virus (TMV). The bioassay results showed that most of these compounds displayed good anti‐TMV activity, and some of them exhibited higher antiviral activity than commercial Ningnanmycin. Especially, compound 8e with excellent anti‐TMV activity (inactivation activity, 92.3%/500 µg·mL^?1; curative activity, 85.7%/500 µg·mL^?1 and protection activity, 64.7%/500 µg·mL^?1) emerged as a potential inhibitor of plant virus TMV. Quantitative structure‐activity relationship studies proved that the van der Waals volume (V) and electronic parameter (∑(∑σ_o+σ_p) and ∑σ_m) for the substituent R¹ were very important for antiviral activities in this class of compounds.     

Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

Synthesis,Modification, and Anticonvulsant Activity of 3′‐R1‐Spiro[indoline‐3,6′‐[1,2,4]triazino[2,3‐c]quinazolin]‐2,2′(7′H)‐diones Derivatives

Previously unknown 3′‐R¹‐5‐R²‐spiro[indoline‐3,6′‐[1,2,4]triazino[2,3‐c]quinazoline]‐2,2′‐(7′H)‐diones and their N‐substituted analogues were obtained via reaction of 6‐R¹‐3‐(2‐aminophenyl)‐1,2,4‐triazin‐5‐ones with isatin and its substituted derivatives. It was shown that alkylation of 3′‐R¹‐5‐R²‐spiro[indoline‐3,6′‐[1,2,4]triazino[2,3‐c]quinazolin]‐2,2′‐(7′H)‐diones by N‐R³‐chloroacetamides or chloroacetonitrile in the presence of а base proceeds by N‐1 atom of isatin fragment. The spectral properties (¹H and ¹³C NMR spectra) of synthesized compounds were studied, and features of spectral patterns were discussed. The high‐effective anticonvulsant and radical scavenging agents among 3′‐R¹‐5‐R²‐spiro[indoline‐3,6′‐[1,2,4]triazino[2,3‐c]quinazolin]‐2,2′(7′H)‐diones and their N‐substituted derivatives were detected. It was shown that compounds 2.2 , 2.8 , and 3.1 exceed or compete the activity of the most widely used in modern neurology drug—lamotrigine on the pentylenetetrazole‐induced seizures model. The aforementioned fact may be considered as a reason for further profound study of synthesized compounds using other pathology models.     

Efficient Preparation of 2, 2′‐Disubstituted‐3, 3′‐(1, 4‐phenylene)bis‐thienopyrimidin‐4‐ones Based on an aza‐Wittig Reaction

Tandem aza‐Wittig reaction of iminophosphorane with 1, 4‐phenylene diisocyanate followed by intramolecular heteroconjugate addition annulation after addition of a nucleophilic reagent (amine, phenol, and alcohol), in the presence of catalytic K₂CO₃ or NaOR, gives selectively the functionalized substituted 2, 2′‐di(alkylamino, aryloxy)‐3, 3′‐(1, 4‐phenylene)bis(thieno[3, 2‐d]pyrimidin‐4(3H)‐ones) and 2, 2′‐di(alkylamino or alkoxy)‐3, 3′‐(1, 4‐phenylene)bis(3, 5, 6, 7‐tetrahydro‐4H‐cyclopenta[4, 5]thieno[2, 3‐d]pyrimidin‐4‐ones).     

[N,N′‐Bis(5‐bromo­salicyl­idene)‐o‐phenylene­diaminato]copper(II)

In the title compound, {4,4′‐di­bromo‐2,2′‐[o‐phenyl­ene­bis­(nitrilo­methyl­idene)]­di­phen­ol­ato‐O,N,N′,O′}copper(II), [Cu(C₂₀H₁₂Br₂N₂O₂], the Cu^II ion shows a slightly distorted square‐planar geometry with the N₂O₂ atoms of the Schiff base imine–phenol tetradentate ligand.     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Synthesis and characterization of fluorine‐containing polybenzimidazole for proton conducting membranes in fuel cells

Two new kinds of fluorine‐containing polybenzimidazoles (PBI), poly(2,2′‐(tetrafluoro‐p‐phenylene)‐5,5′‐bibenzimidazole) and poly(2,2′‐tetradecafluoroheptylene‐5,5′‐bibenzimidazole), were synthesized by condensation polymerization of 3,3′‐diaminobenzidine and perfluoroterephthalic acid (or perfluoroazelaic acid), with polyphosphoric acid as solvent. Thermogravimetric analysis results show that the fluorine‐containing polymers synthesized exhibit promising thermal stability. The film‐forming properties of the fluorine‐containing polymers are improved over nonfluorinated PBI. The introduction of fluorine into the backbone of the polymers has significant positive affection on their chemical oxidation stability demonstrated by Fenton test. Compared with poly(2,2′‐(m‐phenylene)‐5,5′‐bibenzimidazole)/phosphoric acid (PA) composite membrane, the resulting fluorinated membranes with a same PA doping level exhibit better flexibility and higher proton conductivity. The maximum proton conductivity gained is 3.05 × 10^?2 S/cm at 150 °C with a PA doping level of 7. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2115–2122, 2010     

A new two‐dimensional managnese(II) coordination polymer constructed by 2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylate)

In recent years, N‐heterocyclic carboxylate ligands have attracted much interest in the preparation of new coordination polymers since they contain N‐atom donors, as well as O‐atom donors, and have a rich variety of coordination modes which can lead to polymers with intriguing structures and interesting properties. A new two‐dimensional coordination polymer, namely poly[[μ₃‐2,2′‐(1,2‐phenylene)bis(4‐carboxy‐1H‐imidazole‐5‐carboxylato)‐κ⁶O⁴,N³,N^3′,O^4′:O⁵:O^5′]manganese(II)], [Mn(C₁₆H₈N₄O₈)]_n or [Mn(H₄Phbidc)]_n, has been synthesized by the reaction of Mn(OAc)₂·4H₂O (OAc is acetate) with 2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylic acid) (H₆Phbidc) under solvothermal conditions. In the polymer, each Mn^II ion is six‐coordinated by two N atoms from one H₄Phbidc²⁻ ligand and by four O atoms from three H₄Phbidc²⁻ ligands, forming a significantly distorted octahedral MnN₂O₄ coordination geometry. The Mn^II ions are linked by hexadentate H₄Phbidc²⁻ ligands, leading to a two‐dimensional structure parallel to the ac plane. In the crystal, adjacent layers are further connected by N—H…O hydrogen bonds, forming a three‐dimensional structure in the solid state.     

Spectroscopic,Thermal, and Structural Studies of Two New Co‐Crystals of [4,4′‐Bithiazole]‐2,2′‐diamine

Two new 2 : 1 co‐crystals based on [4,4′‐bithiazole]‐2,2′‐diamine (=2,2′‐diamino‐4,4′‐bithiazole (DABTZ)) with 2,2′‐bipyridine (bipy) and benzo‐18‐crown‐6 (bk) were synthesized by slow‐evaporation method in MeOH. These co‐crystals were characterized by means of elemental analysis, and IR, and ¹H‐ and ¹³C‐NMR spectroscopy. Also, thermal analyses under air atmosphere and X‐ray crystallography have been performed on these structures. X‐Ray single‐crystal analyses revealed that these networks contain large vacant voids. These structures, [(DABTZ)₂(bipy)] and [(DABTZ)₂(bk)(MeOH)], crystallized in monoclinic and triclinic forms with space groups of P2₁/c and P , respectively. The self‐assembly of these compounds in the solid state is likely caused by both H‐bonding and π? π stacking.     

Capillary GC using pyridyl β‐cyclodextrin stationary phase

A new β‐CD derivative, heptakis [2,6‐di‐O‐pentyl‐3‐O‐(4′‐chloro‐5′‐pyridylmethyl)]‐β‐CD, was synthesized by the selective introduction of a pyridyl group on the 3‐positions of β‐CD. The chromatographic properties of the pyridyl β‐CD derivative were studied by using it as the stationary phase in capillary GC. The polarity of the prepared stationary phase was moderate, and the separation results demonstrated that the prepared stationary phase possessed excellent separation ability and chiral recognition for a wide range of analytes. Not only the aromatic positional isomers, such as o‐, m‐, p‐xylene and α‐, β‐naphthol isomers, but also some compounds with multi‐stereogenic centers, such as n‐(1‐methylpropyl)‐3‐(2,2‐dichloroethenyl)‐2,2‐dimethylcyclopropanecarboxamide and n‐(1‐methylpropyl)‐3‐(2‐chloro‐3,3,3‐trifluoropropenyl)‐2,2‐dimethylcyclopropanecarboxamide with three stereogenic centers including eight configurational isomers, were successfully separated. The results also indicated that the polarity of the β‐CD derivative, and the hydrogen bonding between the β‐CD derivative, and the analytes had a very important effect on separation.     

Shielding of Electron Acceptors Coordinated to Rhenium(I) by Carboxylato Groups. Intraligand and Charge‐Transfer Excited‐State Properties of fac‐(‘Anthraquinone‐2‐carboxylato')(2,2′‐bipyridine)tricarbonylrhenium (fac‐[ReI(aq‐2‐CO2)(2,2′‐bipy)(CO)3])

The photophysical and photochemical properties of (OC‐6‐33)‐(2,2′‐bipyridine‐κN¹,κN¹′)tricarbonyl(9,10‐dihydro‐9,10‐dioxoanthracene‐2‐carboxylato‐κO)rhenium (fac‐[Re^I(aq‐2‐CO₂)(2,2′‐bipy)(CO)₃]) were investigated and compared to those of the free ligand 9,10‐dihydro‐9,10‐dioxoanthracene‐2‐carboxylate (=anthraquinone‐2‐carboxylate) and other carboxylato complexes containing the (2,2′‐bipyridine)tricarbonylrhenium ([Re(2,2′‐bipy)(CO)₃]) moiety. Flash and steady‐state irradiations of the anthraquinone‐derived ligand (λ_exc 337 or 351 nm) and of its complex reveal that the photophysics of the latter is dominated by processes initiated in the Re‐to‐(2,2′‐bipyridine) charge‐transfer excited state and 2,2′‐bipyridine‐ and (anthraquinone‐2‐carboxylato)‐centered intraligand excited states. In the reductive quenching by N,N‐diethylethanamine (TEA) or 2,2′,2″‐nitrilotris[ethanol] TEOA, the reactive states are the 2,2′‐bipyridine‐centered and/or the charge‐transfer excited states. The species with a reduced anthraquinone moiety is formed by the following intramolecular electron transfer, after the redox quenching of the excited state: [Re^I(aq−2−CO₂)(2,2′‐bipy^.)(CO)₃]⁻⇌[Re^I(aq−2−CO₂^.)(2,2′‐bipy)(CO)₃]⁻ The photophysics, particularly the absence of a Re^I‐to‐anthraquinone charge‐transfer excited state photochemistry, is discussed in terms of the electrochemical and photochemical results.     

A Facile Synthesis of Enantiomerically Pure (R)‐6‐Arylbinols

This work reported a convenient method for the preparation of enantiomerically pure 6‐aryl‐2,2′‐dihydroxy‐1,1′‐binaphthyl derivatives starting from the commercially available (R)‐2,2′‐hydroxy‐1,1′‐binaphthyl [(R)‐ 1 ] via bromination, hydrolysis and Suzuki cross coupling reaction. This novel synthetic method was characterized with high regioselectivity, simple operation, mild reaction conditions, and excellent yield (up to 73%). On the other hand, we synthesized the target unknown compounds, which were confirmed by IR, ¹H NMR, ¹³C NMR, MS and elementary analysis.     

Synthesis and properties of new aromatic poly‐(ether benzoxazole)s from 2,2′‐bis(4‐amino‐3‐hydroxyphenoxy)biphenyl and aromatic dicarboxylic acid chlorides

A new bis(o‐aminophenol) with a crank and twisted noncoplanar structure and ether linkages, 2,2′‐bis(4‐amino‐3‐hydroxyphenoxy)biphenyl, was synthesized by the reaction of 2‐benzyloxy‐4‐fluoronitrobenzene with biphenyl‐2,2′‐diol, followed by reduction. Biphenyl‐2,2′‐diyl‐containing aromatic poly(ether benzoxazole)s with inherent viscosities of 0.52–1.01 dL/g were obtained by a conventional two‐step procedure involving the polycondensation of the bis(o‐aminophenol) monomer with various aromatic dicarboxylic acid chlorides, yielding precursor poly(ether o‐hydroxyamide)s, and subsequent thermal cyclodehydration. These new aromatic poly(ether benzoxazole)s were soluble in methanesulfonic acid, and some of them dissolved in m‐cresol. The aromatic poly(ether benzoxazole)s had glass‐transition temperatures of 190–251 °C and were stable up to 380 °C in nitrogen, with 10% weight losses being recorded above 520 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2656–2662, 2002     

Synthesis of novel 5‐aryl‐1H‐tetrazoles

In this study phenylselenocyanate and some of its derivatives (o‐Cl, p‐Cl, p‐Br, o‐NO₂, p‐NO₂, o‐CH₃, p‐CH₃, o‐COOH, p‐COOH, p‐OCH₃ substituted) were synthesized ( 3a–3j ). The synthesized compounds were converted to 5‐aryl‐1H‐tetrazole ( 4a–4j ), by Et₃N ċ HCl‐NaN₃ in toluene, which are a new series of phenylselanyl‐1H‐tetrazoles. The structure of all the presently synthesized compounds were confirmed using spectroscopic methods (FTIR, ¹H NMR, MS). © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:255–258, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20293     

New Chiral Ligand N—Toluenesulfony1—2,2‘—dimethoxy—6,6’—di—aminobiphenyl for Catalytic Asymmetric Transfer Hydrogenation of Ketones

A new chiral ligand N‐p‐toluenesulfonyl‐2,2′‐dimethoxy‐6,6′‐diaminobiphenyl (Ts‐DMBDPPA) was prepared from 2,2′‐dimethoxy‐6,6′‐diaminobiphenyl via N‐tosylation. Its Ru(II) complex was effective catalysts for catalytic asymmetric transfer hydrogenation of aromatic ketones (with ee's up to 69.3%).     

Syntheses,Structure, Electrochemistry,and Optical Properties of 1,3‐Diethyl‐2,3‐dihydro‐1‐H‐1,3,2‐pyrido‐[4,5‐b]‐diazaboroles

Reaction of 2,5‐bis(dibromoboryl)thiophene ( 4 ) or 1,4‐bis(dibromoboryl)benzene ( 6 ) with two equivalents of N,N′‐dilithiated 2,3‐diaminopyridine ( 3 ) led to the generation of the pyridodiazaboroles 5 and 7 in which the two diazaborole rings are linked by 2,5‐thiophen‐diyl or 1,4‐phenylene units via the boron atom. The novel compounds were characterized by elemental analyses and spectroscopy (¹H‐, ¹¹B‐, ¹³C‐NMR, MS, and UV‐VIS). The molecular structure of 5 was elucidated by X‐ray diffraction. Cyclovoltammograms of 5 and 7 show two irreversible oxidation waves at 0.76 and 0.73 V, respectively vs Fc/Fc⁺. The novel compounds display intense blue luminescence with Stokes shifts of 76 and 74 nm and relative quantum yields of 39 and 43 % vs Coumarin 120 (Φ = 50 %).     

Influence of 1,4‐dioxane solvent inclusion on the crystal structure of 5,5′‐diphenyl‐2,2′‐(p‐phenylene)di‐1,3‐oxazole (POPOP)

Crystallization of 5,5′‐diphenyl‐2,2′‐(p‐phenylene)di‐1,3‐oxazole (POPOP), C₂₄H₁₆N₂O₂, from chloroform or 1,4‐dioxane yielded crystals in pure and solvated forms, respectively. The solvated crystals of POPOP were found to contain 1,4‐dioxane in a strict 1:2 compound–solvent stoichiometry, C₂₄H₁₆N₂O₂·C₄H₈O₂, thus being a defined solvent‐inclusion compound. The crystal system is monoclinic in both cases and the asymmetric unit of the cell contains only half of the molecule (plus one dioxane molecule in the case of the solvated structure), owing to the centrosymmetry of the di‐1,3‐oxazole molecule.     

Study of 1,3‐Dipolar Cycloaddition and Ring Contraction of New 1,4‐Phenylene‐bis[1,5]benzothiazepine Derivatives

Some 1,4‐phenylene‐bis[1,2,4]oxadiazolo‐[5,4‐d][1,5]benzothiazepine derivatives ( 4a , 4b , 4c ) were synthesized by 1,3‐dipolar cycloaddition reaction of benzohydroximinoyl chloride with 1,4‐phenylene‐bis(4‐aryl)‐2,3‐dihydro[1,5]benzothiazepine ( 2a , 2b , 2c ); meanwhile, compounds 2a , 2b , 2c also occurred ring contraction under acylating condition to obtain bis[2‐aryl‐2′‐(β‐1,4‐phenylenevinyl)‐3‐acetyl]‐2,3‐dihydro[1,5]benzothiazoles ( 3a , 3b , 3c ). The structures of some novel compounds were confirmed by IR, ¹H‐NMR, elemental, and X‐ray crystallographic analysis.