The mechanism of O(3P) atom reaction with ethylene and other simple olefins

Reactions of oxygen atoms with ethylene, propene, and 2-butene were studied at room temperature under discharge flow conditions by resonance fluorescence spectroscopy of O and H atoms at pressures of 0.08 to 12 torr. The measured total rate constants of these reactions are K = (7.8 ± 0.6)·10^?13cm³s^?1,K = (4.3 ± 0.4) ± 10^?12 cm³ s^?1, K = (1.4 ± 0.4) · 10^?11 cm³ s^?1. The branching ratios of H atom elimination channels were measured for reactions of O atoms with ethylene and propene. No H-atom elimination was found for the reaction of O-atoms with 2-butene. A redistribution of reaction O + C₂ channels with pressure was found. A mechanism of the O + C₂ reaction was proposed and the possibility of its application to other olefins is discussed. On the basis of mechanism the pressure dependence of the total rate constant for reaction O + C₂ was predicted and experimentally confirmed in the pressure range 0.08–1.46 torr.     

The 13C and D kinetic isotope effects in the reaction of CH4 with Cl

The kinetic isotope effects in the reaction of methane (CH₄) with Cl atoms are studied in a relative rate experiment at 298 ± 2 K and 1013 ± 10 mbar. The reaction rates of ¹³CH₄, ¹²CH₃D, ¹²CH₂D₂, ¹²CHD₃, and ¹²CD₄ with Cl radicals are measured relative to ¹²CH₄ in a smog chamber using long path FTIR detection. The experimental data are analyzed with a nonlinear least squares spectral fitting method using measured high‐resolution spectra as well as cross sections from the HITRAN database. The relative reaction rates of ¹²CH₄, ¹³CH₄, ¹²CH₃D, ¹²CH₂D₂, ¹²CHD₃, and ¹²CD₄ with Cl are determined as k/k = 1.06 ± 0.01, k/k = 1.47 ± 0.03, k/k = 2.45 ± 0.05, k/k = 4.7 ± 0.1, k/k = 14.7 ± 0.3. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 37: 110–118, 2005     

Recommendations for measuring second-order rate constants and kinetic solvent isotope effects on acid-catalyzed reactions

Kinetic solvent isotope effects (KSIE) were measured for the hydrolyses of acetals of benzaldehydes in aqueous solutions covering the pH (pD) range of 1–6. For p-methoxybenzaldehyde diethyl acetal, k/k = 1.8–3.1, depending on the procedure used to calculate the KSIE and on the pH (pD) range used as the basis for k(k). It is shown that this variation is an experimental artifact, and is a characteristic of KSIE measurements in general. It is recommended that k be calculated from a least-squares fit of data to the equation k_obs = k[L⁺], and that the KSIE be reported as k/k. The limitation remains, however, that the KSIE measured for a variety of substances over quite different pH (pD) ranges may not be comparable to more than ?20%. The source of these observations is discussed in terms of small changes in the activity coefficient ratios (a specific salt effect), including the solvent isotope effect on the activity coefficient ratio [eq. (3)].     

The kinetics of the reaction F + H2 → HF + H. A critical review of literature data

Published experimental studies concerning the determination of rate constants for the reaction F + H₂ → HF + H are reviewed critically and conclusions are presented as to the most accurate results available. Based on these results, the recommended Arrhenius expression for the temperature range 190–376 K is k = (1.1 ± 0.1) × 10⁻¹⁰ exp |-(450 ± 50)/T| cm³ molecule⁻¹ s⁻¹, and the recommended value for the rate constant at 298 K is k = (2.43 ± 0.15) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. The recommended Arrhenius expression for the reaction F + D₂ → DF + D, for the same temperature range, based on the recommended expression for k and accurate results for the kinetic isotope effect k/k is k = (1.06 ± 0.12) × 10^×10 exp |-(635 ± 55)/T|cm³ molecule⁻¹ s⁻¹, and the recommended value for 298 K is k = (1.25 ± 0.10) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 67–71, 1997.     

Peculiar kinetics of the complex formation in the iron(III)–sulfate system

The results of comprehensive equilibrium and kinetic studies of the iron(III)–sulfate system in aqueous solutions at I = 1.0 M (NaClO₄), in the concentration ranges of T = 0.15–0.3 mM, and at pH 0.7–2.5 are presented. The iron(III)–containing species detected are FeOH²⁺ (=FeH_?1), (FeOH) (=Fe₂H_?2), FeSO, and Fe(SO₄) with formation constants of log β = ?2.84, log β = ?2.88, log β = 2.32, and log β = 3.83. The formation rate constants of the stepwise formation of the sulfate complexes are k_1a = 4.4 × 10³ M^?1 s^?1 for the ${\rm Fe}^{3+} + {\rm SO}_4^{2-}\,\stackrel{k_{1a}}{\rightleftharpoons}\, {\rm FeSO}_4^+The results of comprehensive equilibrium and kinetic studies of the iron(III)–sulfate system in aqueous solutions at I = 1.0 M (NaClO₄), in the concentration ranges of T = 0.15–0.3 mM, and at pH 0.7–2.5 are presented. The iron(III)–containing species detected are FeOH²⁺ (=FeH_?1), (FeOH) (=Fe₂H_?2), FeSO, and Fe(SO₄) with formation constants of log β = ?2.84, log β = ?2.88, log β = 2.32, and log β = 3.83. The formation rate constants of the stepwise formation of the sulfate complexes are k_1a = 4.4 × 10³ M^?1 s^?1 for the ${\rm Fe}^{3+} + {\rm SO}_4^{2-}\,\stackrel{k_{1a}}{\rightleftharpoons}\, {\rm FeSO}_4^+$ step and k₂ = 1.1 × 10³ M^?1 s^?1 for the ${\rm FeSO}_4^+ + {\rm SO}_4^{2-} \stackrel{k_2}{\rightleftharpoons}\, {\rm Fe}({\rm SO}_4)_2^-$ step. The mono‐sulfate complex is also formed in the ${\rm Fe}({\rm OH})^{2+} + {\rm SO}_4^{2-} \stackrel{k_{1b}}{\longrightarrow} {\rm FeSO}_4^+$ reaction with the k_1b = 2.7 × 10⁵ M^?1 s^?1 rate constant. The most surprising result is, however, that the 2 FeSO? Fe³⁺ + Fe(SO₄) equilibrium is established well before the system as a whole reaches its equilibrium state, and the main path of the formation of Fe(SO₄) is the above fast (on the stopped flow scale) equilibrium process. The use and advantages of our recently elaborated programs for the evaluation of equilibrium and kinetic experiments are briefly outlined. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 114–124, 2008     

Kinetics and mechanism of the oxidation of some carboxylates by a nickel (III) oxime-imine complex

The kinetics of the oxidation of formate, oxalate, and malonate by |Ni^III(L¹)|²⁺ (where HL¹ = 15-amino-3-methyl-4,7,10,13-tetraazapentadec-3-en-2-one oxime) were carried out over the regions pH 3.0–5.75, 2.80–5.50, and 2.50–7.58, respectively, at constant ionic strength and temperature 40°C. All the reactions are overall second-order with first-order on both the oxidant and reductant. A general rate law is given as - d/dt|Ni^III(L¹)²⁺| = k_obs|Ni^III(L¹)²⁺| = (k_d + nk_s |R|)|Ni^III(L¹)²⁺|, where k_d is the auto-decomposition rate constant of the complex, k_s is the electron transfer rate constant, n is the stoichiometric factor, and R is either formate, oxalate, or malonate. The reactivity of all the reacting species of the reductants in solution were evaluated choosing suitable pH regions. The reactivity orders are: k_HCOOH > k; k > k > k, and k > k < k for the oxidation of formate, oxalate, and malonate, respectively, and these trends were explained considering the effect of hydrogen bonded adduct formation and thermodynamic potential. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 225–230, 1997.     

Chemical actinometry at 147.0 nm

Hexafluoroacetone (HFA) and O₂ were photolyzed at 147.0 nm to investigate their use in chemical actinometry. The products, CO for the former and O₃ in the latter case, were monitored. For accurate comparison, both of these substances were irradiated by a single light source with two identical reaction cells at 180° to each other. The light intensities I were measured under the same integrated as well as instantaneous photon flux based on ? and ?_CO (quantum yield) as 2 and 1, respectively. Optimum conditions for maximum product yield were 5.0 torr HFA pressure and an O₂ flow rate of 200 ml/min at 1 atm pressure for a 20-minute photolysis period. For light intensity variations between 1.09 × 10¹⁴ and 2.10 × 10¹⁵ photons absorbed/sec, the ratio I/I_HFA was found to be unity. Calibration with the commonly used N₂O actinometer for a ? value of 1.41 showed that I/I_HFA and I/I are unity. Both HFA and O₂ are suitable chemical actinometers at 147.0 nm with ?_CO and ? of 1 and 2, respectively. The light intensity determination in the first case involves the measurement of only one product which is noncondensible at 77°K, whereas wet analysis for O₃, the only product, in the second actinometer is necessary. Both of these determinations are quite simple and are preferable over product analysis in N₂O actiometry, wherein N₂ separation from other noncondensibles at 77°K is required.     

The quantum efficiency of the primary processes in formaldehyde photolysis at 3130 Å and 25°C

The mechanism of the photolysis of formaldehyde was studied in experiments at 3130 Å and in the pressure range of 1–12 torr at 25°C. The experiments were designed to establish the quantum yields of the primary decomposition steps (1) and (2), CH₂O + hν → H + HCO (1): CH₂O + hν → H₂ + CO (2), through the effects of added isobutene, trimethylsilane, and nitric oxide on Φ_CO and Φ. The ratio Φ_CO/Φ was found to be 1.01 ± 0.09(2σ) and (Φ + Φ_CO)/2 = 1.10 ± 0.08 over the range of pressures and a 12-fold change in incident light intensity. Isobutene and nitric oxide additions reduced Φ to about the same limiting value, 0.32 ± 0.03 and 0.34 ± 0.04, respectively, but these added gases differed in their effects on Φ_CO. With isobutene addition Φ_CO/Φ reached a limiting value of 2.3; with NO addition Φ_CO exceeded unity. The addition of small amounts of Me₃SiH reduced Φ to 1.02 ± 0.08 and lowered Φ_CO to 0.7. These findings were rationalized in terms of a mechanism in which the “nonscavengeable,” molecular hydrogen is formed in reaction (2) with ?₂ = 0.32 ± 0.03, while the “free radical” hydrogen is formed in reaction (1) with ?₁ = 0.68 ± 0.03. In the pure formaldehyde system these reactions are followed by (3)–(5): H + CH₂O → H₂ + HCO (3); 2HCO → CH₂O + CO (4); 2HCO → H₂ + 2CO (5). The data suggest k₄/k₅ ? 5.8. Isobutene reduced Φ by the reaction H + iso-C₄H₈ → C₄H₉ (20), and the results give k₂₀/k₃ ? 43 ± 4, in good agreement with the ratio of the reported values of the individual constants k₃ and k₂₀.     

The acetyl radicals CH3CO· and CD3CO· studied by flash photolysis and kinetic spectroscopy

Ultraviolet absorption spectra have been characterized for the acetyl-h₃ and acetyl-d₃ radicals, which were generated by the flash photolysis of the corresponding acetones. The spectra are broad and intense, with values of the extinction coefficient at the respective maxima estimated as: ?CH₃CO(215) = (1.0 ± 0.1) × 10⁴ L/mol·cm and ?CD₃CO(207.5) = (1.0 ± 0.05) × 10⁴ L/mol·cm. Rate constants for the reactions of mutual interaction were estimated as: k = 3.5 × 10¹⁰ L/mol·s and k = 3.4 × 10¹⁰ L/mol·s. Rate constants for the reactions of cross interaction were estimated as: k = 8.6 × 10¹⁰ L/mol·s and k = 5.2 × 10¹⁰ L/mol·s. The related values of the cross interaction ratios k/(kk)^1/2 = 2.6 and k/(kk)^1/2 = 1.6 do not differ significantly from the statistical value of 2. The participation of the radical displacement reactions was estimated in terms of the fractions k/k = 0.38 and k/k = 0.47. Corroborative spectra were obtained from the flash photolysis of methyl ethyl ketone and biacetyl, and the relative rates of the competing primary processes were estimated from the relative peak heights of the acetyl and methyl radicals in each system.     

Kinetics of oxidation of benzyl alcohol by sodium N-chloro-p-toluenesulfonamide

The kinetics of oxidation of benzyl alcohol and substituted benzyl alcohols by sodium N-chloro-p-toluenesulfonamide (chloramine-T, CAT) in HClO₄ (0.1–1 mol/dm³) containing Cl^? ions, over the temperature range of 30–50°C have been studied. The reaction is of first order each with respect to alcohol and oxidant. The fractional order dependence of the rate on the concentrations of H⁺ and Cl^? suggests a complex formation between RNCl^? and HCl. In higher acidic chloride solution the rate of reaction is proportional to the concentrations of both H⁺ and Cl^7hyphen;. The observed solvent isotope effect (k/k) is 1.43 at 30°C. The reaction constant (p = ?1.66) and thermodynamic parameters are evaluated. Rate expressions and probable mechanisms for the observed kinetics have been suggested.     

A kinetic study of the autocatalytic permanganate oxidation of formic acid

The kinetics of the permanganate oxidation of formic acid in aqueous perchloric acid has been studied. The results indicate that this reaction is autocatalyzed by both manganese(II) ion (formed as a reaction product) and colloidal manganese dioxide (formed as an intermediate). The apparent rate constants corresponding to the noncatalytic and autocatalytic reaction pathways are given, respectively, by the following equations The activation energies associated with the true rate constants, ??, ??, ??, ??, ??, and ?? are 37.2, 62.5, 70.9, 52.5, 40.8, and 59.9 kJ mol^?1, respectively. The percentage of the total reaction corresponding to each pathway is given for typical experimental conditions. Mechanisms in agreement with the kinetic data are proposed for the six different reaction pathways observed.     

A pulse radiolysis study of I and (SCN) in aqueous solutions over the temperature range 15–90°C

The extinction coefficients and the decay kinetics of I and (SCN) have been characterized over the 15–90°C-temperature range. The extinction coefficients of I at 385 and 725 nm were determined to be 10,000 and 2560M^?1 cm^?1, respectively, based on the extinction coefficient of (SCN) at 475 nm being equal to 7600M^?1 cm^?1. At these three wavelengths, all extinction coefficients were constant over the temperature range studied. The rate of decay of both I and (SCN) was found to be a function of I^? and SCN^? concentration, respectively, as well as temperature.     

Kinetics and mechanism of oxidation of indole by HSO

Mechanistic studies on the oxidation of indole [IND] by HSO in aqueous CH₃CN medium (80:20 v/v) have been carried out, and the reaction is characterized by the rate law ?d[HSO]/dt = k[IND][HSO]HSO and SO are probably the respective electrophiles in acidic and basic mediums. Nucleophilic attack of the ethylenic bond on the persulfate oxygen is envisaged to explain the reactivity. The reaction fails to initiate polymerization, and a radical mechanism is ruled out. Thermodynamic parameters very much suggest a bimolecular process. No significant catalytic activity is observed for the reaction system in the presence of Ag⁺, Cu²⁺, and heteroaromatic N‐bases. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 39: 46–51, 2007     

Oxidation of thallium(I) by hexacyanoferrate(III) in aqueous acetic acid

The hexacyanoferrate(III)-thallium(I) reaction in aqueous acetic acid containing large concentrations of hydrochloric acid is considerably accelerated both by hydrogen and chloride ions as well as increasing acetic acid in the medium. The experimental results obey the rate law (1) where β₁ to β₆ are the cumulative stability constants of the species TlCl, TlCl, TlCl, HFe(CN), H₂Fe(CN) and H₃Fe(CN)₆ respectively and k_a and k_b are the rate constants associated with the mono- and di-protonated oxidant species. The main active species are H₂Fe(CN) and TlCl.     

Kinetics of reaction of copper with substituted benzyl chlorides in dipolar aprotic solvents

The reaction of copper with benzyl chlorides in dipolar aprotic solvents has been investigated. The kinetic and thermodynamic parameters of the reaction of copper with benzyl chloride in dimethyl sulfoxide, dimethylacetamide, and hexamethylphosphoramide have been obtained. Hammett plots of log (k/k°) versus the substituent constant σ gave good correlation. The structure of the organic group has little effect on the rate of reaction of benzyl chloride with copper. The kinetic and thermodynamic parameters were correlated with donor number of solvent (DN). The ratio k_RBr/k_RCl and Hammett ρ values provide evidence in favor of the halogen atom transfer mechanism. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 547–555, 2007     

Disproportionation-to-combination ratios for cyclohexyl-h11 and -d11 radicals in the gas phase as determined by the radiolysis of water vapor–cyclohexane mixtures

In the radiolysis of water vapor containing small concentrations of cyclohexane, the principal products which account for about 98% of all end products are found to be hydrogen, cyclohexene, and bicyclohexyl. Cyclohexene and bicyclohexyl yields were determined over a range of temperatures (70–200°C), total pressures (50–2400 torr), and total doses (0.15–2.0 Mrad). The disproportionation–combination ratio k/k for c-C₆H₁₁ radicals could be determined as 0.56 ± 0.01 from the ratio of cyclohexene to bicyclohexyl yield. By using c-C₆D₁₂, the ratio k/k for c-C₆D₁₁ radicals is found to be 0.38 ± 0.01. Comparison of the reactivity pattern of C₆H₁₁ and C₆D₁₁ radicals leads to (k)/(k)/(k/k) = 1.47 ± 0.02. The corresponding values for the reactions of c-C₆H₁₁ with c-C₆D₁₁ were also determined.     

2–Butoxyethanol and benzyl alcohol reactions with the nitrate radical: Rate coefficients and gas‐phase products

The bimolecular rate coefficients k and k were measured using the relative rate technique at (297 ± 3) K and 1 atmosphere total pressure. Values of (2.7 ± 0.7) and (4.0 ± 1.0) × 10^?15 cm³ molecule^?1 s^?1 were observed for k and k, respectively. In addition, the products of 2‐butoxyethanol + NO₃^? and benzyl alcohol + NO₃^? gas‐phase reactions were investigated. Derivatizing agents O‐(2,3,4,5,6‐pentafluorobenzyl)hydroxylamine and N, O‐bis (trimethylsilyl)trifluoroacetamide and gas chromatography mass spectrometry (GC/MS) were used to identify the reaction products. For 2‐butoxyethanol + NO₃^? reaction: hydroxyacetaldehyde, 3‐hydroxypropanal, 4‐hydroxybutanal, butoxyacetaldehyde, and 4‐(2‐oxoethoxy)butan‐2‐yl nitrate were the derivatized products observed. For the benzyl alcohol + NO₃^? reaction: benzaldehyde ((C₆H₅)C(?O)H) was the only derivatized product observed. Negative chemical ionization was used to identify the following nitrate products: [(2‐butoxyethoxy)(oxido)amino]oxidanide and benzyl nitrate, for 2‐butoxyethanol + NO₃^? and benzyl alcohol + NO₃^?, respectively. The elucidation of these products was facilitated by mass spectrometry of the derivatized reaction products coupled with a plausible 2‐butoxyethanol or benzyl alcohol + NO₃^? reaction mechanisms based on previously published volatile organic compound + NO₃^? gas‐phase mechanisms. © 2012 Wiley Periodicals, Inc.

1 This article is a U.S. Government work and, as such, is in the public domain of the United States of America.

© 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 778–788, 2012     

Kinetics and mechanisms of substitution reactions with sulfur-containing nucleophiles in aqueous acid solutions. I—rates of reactions of some tetrahalopalladate (II) anions with thiourea and selenourea

The activation energy parameters for the reaction of PdX (X=Cl^?, Br^?) in aqueous halide acid solution with thiourea (tu) and selenourea (seu) have been determined. High rates of reaction parallel low enthalpies and appreciable negative entropy of activation. The rate law in each case simplifies to k_obs=k[L] where L=tu or seu, and only ligand-dependent rate constants are observed at 25°C. The ligand-dependent rate constants for the first identifiable step in the PdCl + X system is (9.1±0.1) × 10³ M^?1 sec^?1 and (4.5±0.1) × 10⁴ M^?1 sec^?1 for X=tu and seu, respectively, while for the PdBr + X system it is (2.0±0.1) × 10⁴ M^?1 sec^?1 and (9.0±0.1) × 10⁴ M^?1 sec^?1 for X=tu and seu, respectively.     

Consistency of theory and experiment in the ethane–methyl radical system

The thermal decomposition of ethane has been reinvestigated using the single pulse, reflected shock technique. Reflected shock temperatures were corrected for boundary layer-induced nonidealities using the thermal decomposition of cyclohexene as a kinetic standard. The rate constant for the reaction was calculated from the rate of formation of methane under conditions of very low extent of reaction, over a temperature range of 1000–1241 K. Ethane compositions of 1% and 3% in argon at total reaction pressures of 3 and 9 atm were used, and a small pressure dependence of k₁ was observed. An RRKM model is described which gives excellent agreement with this and other recent dissociation and recombination rate constant data in light of a recent revision to the thermochemistry of the methyl radical. In the range of 1000–1300 K an RRKM extrapolated k is given by the expression, log k = 17.2 ? 91,000/2.3RT, while at 298 K the calculation gives log k (l/mol sec) = 10.44, where k is calculated from k and the equilibrium constant.     

Kinetics and equilibria of the reaction between bromine and ethyl ether. The C?H bond dissociation energy in ethyl ether

The kinetics and equilibria of the reaction: have been studied in the temperature range 298–333 K by using the very low pressure reactor (VLPR) technique. Combining the estimated entropy change of reaction (1), ΔS = 8.1 ± 1.0 eu, with the measured ΔG, we find ΔH = 4.2 ± 0.4 kcal/mol; ΔH(CH₃CHOC₂H₅) = ?20.2 kcal/mol, and DH° [Et OCH(Me)-H] = 91.7 ± 0.4 kcal/mol. We find: where θ = 2.3 RT in kcal/mol. It has been shown that the reaction proceeds via a loose transition state and the “contact TS” model calculation gives a very good agreement with the observed value.