Reaction of ω‐carbonyl substituted 1,3,3‐trimethyl‐2‐methyleneindolines with phosphorus(III) halides

The phosphorylation of N‐benzoyl‐2‐(1,3,3‐trimethyl‐2‐methyleneindoline)acetamide ( 2 ) and ω‐(3‐dimethylamino)benzoyl‐1,3,3‐trimethyl‐2‐methyleneindoline ( 6 ) with phosphorus(III) halides resulted in the formation of 2,3‐dihydro‐4H‐1,5,2‐oxazaphosphinin‐4‐one and 1,2‐dihydro‐3H‐phosphindol‐3‐one systems, respectively. The properties of the obtained compounds were studied. Further cyclization of 1,2‐dihydro‐3H‐phosphindol‐3‐one into dihydrophosphindolo[3,2‐c]pyrazole was carried out. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:23–28, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10060     

New N6‐substituted 8‐alkyl‐2‐phenylmethylsulfanyl‐adenines. II

Title compounds bearing substituents on C(2), C(6) and C(8) were prepared from a newly synthesized pyrimidine derivative 11. The new pyrimidine 11 was generated from compound 2 through two different synthetic schemes. In one pathway, compound 2 was nitrosated, reduced and alkylated to produce com pounds 9 , 10 and 11 respectively (Scheme). In an alternate route using compound 2 as the starting material, a coupling reaction using the diazonium salt derived from p‐methylaniline afforded the azo derivative 7 , which was subsequently alkylated and reductively cleaved to form compounds 8 and 11 respectively (See Scheme). Compound 11 was annulated to the corresponding hypoxanthine derivatives 12–14 ; compounds 12 and 13 were chlorinated with phosphorus oxychloride, then reacted with amines to yield compound 17 and 20 respectively. Compounds 21 , 22 and 23 were obtained by oxidation of the corresponding sulfide as depicted in Scheme. Alkylation of the thiol function of 1 gave a mixture of 3 and 4. Compound 3 was chlo rinated to 5. Nitration of 5 resulted in electrophilic aromatic substitution of the aryl ring and concomitant oxidation of the sulfide to the sulfoxide, producing 6.     

(2‐Methyl­quinolin‐8‐olato)­iron(III) and ‐copper(II) complexes

The crystal structures of tris(2‐methyl­quinolin‐8‐olato‐N,O)­iron(III), [Fe­(C₁₀­H₈­NO)₃], (I), and aqua­bis(2‐methyl­quinolin‐8‐olato‐N,O)­copper(II), [Cu­(C₁₀­H₈NO)₂­(H₂O)], (II), have been determined. Compound (I) has a distorted octahedral configuration, in which the central Fe atom is coordinated by three N atoms and three O atoms from three 2‐methylquinolin‐8‐olate ligands. The three Fe—O bond distances are in the range 1.934 (2)–1.947 (2) Å, while the three Fe—N bond distances range from 2.204 (2) to 2.405 (2) Å. In compound (II), the central Cu^II atom and H₂O group lie on the crystallographic twofold axis and the coordination geometry of the Cu^II atom is close to trigonal bipyramidal, with the three O atoms in the basal plane and the two N atoms in apical positions. The Cu—N bond length is 2.018 (5) Å. The Cu—O bond length in the basal positions is 1.991 (4) Å, while the Cu—O bond length in the apical position is 2.273 (6) Å. There is an intermolecular OW—H?O hydrogen bond which links the mol­ecules into a linear chain along the b axis.     

Copper(II)‐ and gold(III)‐mediated cyclization of a thiourea to a substituted 2‐aminobenzothiazole

Benzothiazole derivatives are a class of privileged molecules due to their biological activity and pharmaceutical applications. One route to these molecules is via intramolecular cyclization of thioureas to form substituted 2‐aminobenzothiazoles, but this often requires harsh conditions or employs expensive metal catalysts. Herein, the copper(II)‐ and gold(III)‐mediated cyclizations of thioureas to substituted 2‐aminobenzothiazoles are reported. The single‐crystal X‐ray structures of the thiourea N‐(3‐methoxyphenyl)‐N ′‐(pyridin‐2‐yl)thiourea, C₁₃H₁₃N₃OS, and the intermediate metal complexes aquabis[5‐methoxy‐N‐(pyridin‐2‐yl‐κN )‐1,3‐benzothiazol‐2‐amine‐κN ³]copper(II) dinitrate, [Cu(C₁₃H₁₁N₃OS)₂(H₂O)](NO₃)₂, and bis{2‐[(5‐methoxy‐1,3‐benzothiazol‐2‐yl)amino]pyridin‐1‐ium} dichloridogold(I) chloride monohydrate, (C₁₃H₁₂N₃OS)₂[AuCl₂]Cl·H₂O, are reported. The copper complex exhibits a distorted trigonal–bipyramidal geometry, with direct metal‐to‐benzothiazole‐ligand coordination, while the gold complex is a salt containing the protonated uncoordinated benzothiazole, and offers evidence that metal reduction (in this case, Au^III to Au^I) is required for the cyclization to proceed. As such, this study provides further mechanistic insight into the role of the metal cations in these transformations.     

Tris(2‐methyl­quinoline‐8‐seleno­lato‐κ2N,Se)antimony(III)

The title complex, [Sb(C₁₀H₈NSe)₃], has a 3Se+3N distorted octa­hedral geometry at the Sb atom. The structure is stabilized by weak inter­molecular C—H⋯π(arene) inter­actions.     

Synthesis,structural analysis,and visualization of poly(2‐ethynyl‐9‐substituted carbazole)s and poly(3‐ethynyl‐9‐substituted carbazole)s containing chiral and achiral minidendritic substituents

The synthesis of 2‐ethynyl‐9‐substituted carbazole and 3‐ethynyl‐9‐substituted carbazole monomers containing first‐generation chiral and achiral dendritic (i.e., minidendritic) substituents, 2‐ethynyl‐9‐[3,4,5‐tris(dodecan‐1‐yloxy)benzyl]carbazole (2ECz), 3‐ethynyl‐9‐[3,4,5‐tris(dodecan‐1‐yloxy)benzyl]carbazole (3ECz), 2‐ethynyl‐9‐{3,4,5‐tris[(S)‐2‐methylbutan‐1‐yloxy]benzyl}carbazole (2ECz*), and 3‐ethynyl‐9‐{3,4,5‐tris[(S)‐2‐methylbutan‐1‐yloxy]benzyl}carbazole (3ECz*), is presented. All monomers were polymerized and copolymerized by stereospecific polymerization to produce cis‐transoidal soluble stereoisomers. A structural analysis of poly(2ECz), poly(2ECz*), poly(3ECz), poly(3ECz*), poly(2ECz*‐co‐2ECz), and poly(3ECz*‐co‐3ECz) by a combination of techniques, including ¹H NMR, ultraviolet–visible, and circular dichroism spectroscopy, thermal optical polarized microscopy, and X‐ray diffraction experiments, demonstrated that these polymers had a helical conformation that produced cylindrical macromolecules exhibiting chiral and achiral nematic phases. Individual chains of these cylindrical macromolecules were visualized by atomic force microscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3509–3533, 2002     

meso‐(2‐Pyridyl)‐boron(III)‐subporphyrin: Perimeter Iridium(III) Coordination

Peripherally metalated porphyrinoids are promising functional π‐systems displaying characteristic optical, electronic, and catalytic properties. In this work, 5‐(2‐pyridyl)‐ and 5,10,15‐tri(2‐pyridyl)‐B^III‐subporphyrins were prepared and used to produce cyclometalated subporphyrins by reactions with [Cp*IrCl₂]₂, which proceeded through an efficient C?H activation to give the corresponding mono‐ and tri‐Ir^III complexes, respectively. While the mono‐Ir^III complex was obtained as a diastereomeric mixture, a C₃‐symmetric tri‐Ir^III complex with the three Cp*‐units all at the concave side was predominantly obtained in a high yield of 90 %, which displays weak NIR phosphorescence even at room temperature in degassed CH₂Cl₂, differently from the mono‐Ir^III complexes.     

Reaction of 4‐substituted thiosemicarbazides with (2,4,7‐trinitro‐9H‐fluoren‐9‐ylidene)propanedinitrile

4‐Substituted thiosemicarbazides 4a‐c reacted with (2,4,7‐trinitro‐9H‐fluoren‐9‐ylidene)‐propanedinitrile ( 2 ) in pyridine with admission of air to form spiro[fluorene‐9,3′‐(1,2,4‐triazole)]derivatives 5a‐c and (4‐substituted thiosemicarbazono)propanedinitriles 6a‐c in modest yields. 2,4,7‐Trinitro‐9‐fluorenone ( 8 ) as well as one reduction product thereof and of 2 , namely compounds 9 and 10 , respectively are also found. A rationale for the conversions observed is presented.     

Rhodium(III)‐Catalyzed Alkenylation Reactions of 8‐Methylquinolines with Alkynes by C(sp3)H Activation

The alkenylation reactions of 8‐methylquinolines with alkynes, catalyzed by [{Cp*RhCl₂}₂], proceeds efficiently to give 8‐allylquinolines in good yields by C(sp³)? H bond activation. These reactions are highly regio‐ and stereoselective. A catalytically competent five‐membered rhodacycle has been structurally characterized, thus revealing a key intermediate in the catalytic cycle.     

Ten‐vertex rhodadithiaborane ­chemistry: [8‐{I(CH2)5}‐3‐(η5‐C5Me5)‐arachno‐3,7,8‐RhS2B8H9]

Neutral 8‐(5‐iodo‐n‐pentyl)‐3‐(η⁵‐penta­methyl­cyclo­pentadi­enyl)‐arachno‐3‐rhoda‐7,8‐di­thia­undecaborane, [Rh(C₅H₁₉B₈­IS₂)­(C₁₀H₁₅)], obtained from the [arachno‐7,8‐S₂B₉H₁₀]^? anion by treatment with I(CH₂)₅I followed by [Rh(C₅Me₅)Cl₂]₂ and N,N,N′,N′‐tetra­methyl‐1,8‐di­amino­naphthalene, has the 11‐vertex cluster geometry of [arachno‐7,8‐S₂B₉H₁₀]^?, but with an {Rh(C₅Me₅)} unit in the 3‐position instead of a {BH} unit, and with a –(CH₂)₅I chain attached exo to an S atom.     

1,2‐Ph2‐9‐I‐1,2‐closo‐C2B10H9

The title compound, 9‐iodo‐1,2‐di­phenyl‐1,2‐dicarba‐closo‐dodecaborane(9), C₁₄H₁₉B₁₀I, has the expected pseudo‐icosahedral cluster geometry, with a cage C—C distance of 1.724 (4) Å, comparable to that in the non‐iodinated parent. However, the twist angles, θ, of the phenyl rings are 2.1 (6) and 27.6 (5)°, the latter being unusually large.     

Synthesis and characterization of di‐n‐butyltin(IV) complexes with 4′/2′‐nitrobiphenyl‐2‐carboxylic acids: X‐ray crystal structures of [{(n‐C4H9)2Sn(OCOC12H8NO2−4′)}2O]2 and (n‐C4H9)2Sn{OCOC12H8NO2−4′}2

Reactions of di‐n‐butyltin(IV) oxide with 4′/2′‐nitrobiphenyl‐2‐carboxylic acids in 1 : 1 and 1 : 2 stoichiometry yield complexes [{(n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′/2′)}₂O]₂ ( 1 and 2 ) and (n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′/2′)₂ ( 3 and 4 ) respectively. These compounds were characterized by elemental analysis, IR and NMR (¹H, ¹³C and ¹¹⁹Sn) spectroscopy. The IR spectra of these compounds indicate the presence of anisobidentate carboxylate groups and non‐linear C? Sn? C bonds. From the chemical shifts δ (¹¹⁹Sn) and the coupling constants ¹J(¹³C, ¹¹⁹Sn), the coordination number of the tin atom and the geometry of its coordination sphere have been suggested. [{(n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′)}₂O]₂ ( 1 ) exhibits a dimeric structure containing distannoxane units with two types of tin atom with essentially identical geometry. To a first approximation, the tin atoms appear to be pentacoordinated with distorted trigonal bipyramidal geometry. However, each type of tin atom is further subjected to a sixth weaker interaction and may be described as having a capped trigonal bipyramidal structure. The diffraction study of the complex (n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′)₂ ( 3 ) shows a six–coordinate tin in a distorted octahedral frame containing bidentate asymmetric chelating carboxylate groups, with the n‐Bu groups trans to each other. The n‐Bu? Sn? n‐Bu angle is 152.8° and the Sn? O distances are 2.108(4) and 2.493(5) Å. The oxygen atom of the nitro group of the ligand does not participate in bonding to the tin atom in 1 and 3 . Crystals of 1 are triclinic with space group P1 and of that of 3 have orthorhombic space group Pnna. Copyright © 2003 John Wiley & Sons, Ltd.     

Tetraphenylphosphonium bis(2‐thioxo‐1,3‐dithiole‐4,5‐dithiolato)aurate(III) acetone solvate and ethyltriphenylphosphonium bis(2‐thioxo‐1,3‐dithiole‐4,5‐dithiolato)aurate(III)

In the two title complexes, (C₂₄H₂₀P)[Au(C₃S₅)₂]·C₃H₆O, (I), and (C₂₀H₂₀P)[Au(C₃S₅)₂], (II), the Au^III atoms exhibit square‐planar coordinations involving four S atoms from two 2‐thioxo‐1,3‐dithiole‐4,5‐dithiolate (dmit) ligands. The Au—S bond lengths, ranging from 2.3057 (8) to 2.3233 (7) Å in (I) and from 2.3119 (8) to 2.3291 (10) Å in (II), are slightly smaller than the sum of the single‐bond covalent radii. In (I), there are two halves of independent Ph₄P⁺ cations, in which the two P atoms lie on twofold rotation axis sites. The Ph₄P⁺ cations and [Au(C₃S₅)₂]⁻ anions are interspersed as columns in the packing. Layers composed of Ph₄P⁺ and [Au(C₃S₅)₂]⁻ are separated by layers of acetone molecules. In (II), the [Au(C₃S₅)₂]⁻ anions and EtPh₃P⁺ counter‐cations form a layered arrangement, and the [Au(C₃S₅)₂]⁻ anions form discrete pairs with a long intermolecular Au...S interaction for each Au atom in the crystal structure.     

Synthesen und Eigenschaften von Pentafluorethylkupfer(I)‐ und ‐(III)‐Verbindungen: Cu(C2F5) · D, [Cu(C2F5)2]– und (C2F5)2CuSC(S)N(C2H5)2

Syntheses and Properties of Pentafluoroethylcopper(I) and ‐copper(III) Compounds: CuC₂F₅ · D, [Cu(C₂F₅)₂]^–, and (C₂F₅)₂CuSC(S)N(C₂H₅)₂ The reactions of Cd(C₂F₅)₂ · D and Zn(C₂F₅)₂ · D (D = 2 CH₃CN, 2 DMF), respectively, with copper(I) halides in the presence of halides quantitatively yield the CuC₂F₅ compounds CuC₂F₅ · D and [Cu(C₂F₅)₂]^–. The CuC₂F₅ complexes are identified by NMR spectroscopy, while [Cu(C₂F₅)₂]^– is isolated as PNP salt (PNP = (C₆H₅)₃PNP(C₆H₅)₃⁺). Both compounds are excellent C₂F₅ group transfer reagents, even at low temperature. Oxidation of [Cu(C₂F₅)₂]^– with [(C₂H₅)₂NC(S)S]₂ yields the crystalline Cu(III) compound (C₂F₅)₂CuSC(S)N(C₂H₅)₂ (monoclinic, C2/c).     

Preparation of 6‐, 7‐, and 8‐substituted derivatives of 2‐Oxa‐1,3,4,10‐tetraazacyclopenta[b]fluoren‐9‐one

The preparation of a variety of derivatives of 2‐oxa‐1,3,4,10‐tetraazacyclopenta[b]fluoren‐9‐one 1 is described. A series of substituted indan‐1‐ones were prepared and oxidized with N‐bromosuccinimide and dimethyl sulfoxide to the corresponding ninhydrin derivatives. Cyclization of the ninhydrins with furazan‐3,4‐diamine yielded the target tetracycles. Appropiate choice of substituents in ninhydrins led to a preference for one regioisomer in the target tetracycles. This permitted the synthesis of a variety of 8‐substituted hetero‐cycles. In those instances where isomer formation was possible, structural assignments were confirmed by X‐ray crystallography.     

Tris[2‐(morpholin‐4‐ylmethyl)phenyl‐κ2C1,N]antimony(III)

The title compound, [Sb(C₁₁H₁₄NO)₃], is monomeric with the Sb atom located on a threefold axis. The complex exhibits distorted trigonal–antiprismatic geometry around the Sb atom, owing to the presence of intramolecular N→Sb interactions. H...phenyl intermolecular interactions lead to the formation of dimers stacked along the c axis. The morpholine rings exhibit almost ideal chair conformations. No intermolecular interactions between the morpholine rings of neighbouring molecules were observed.     

Rhodium(III)‐ and Iridium(III)‐Catalyzed C7 Alkylation of Indolines with Diazo Compounds

A Rh^III‐catalyzed procedure for the C7‐selective C?H alkylation of various indolines with α‐diazo compounds at room temperature is reported. The advantages of this process are: 1) simple, mild, and pH‐neutral reaction conditions, 2) broad substrate scope, 3) complete regioselectivity, 4) no need for an external oxidant, and 5) N₂ as the sole byproduct. Furthermore, alkylation and bis‐alkylation of carbazoles at the C1 and C8 positions have also been developed. More significantly, for the first time, a successful Ir^III‐catalyzed intermolecular insertion of arene C?H bonds into α‐diazo compounds is reported.     

Three monoalkoxy‐substituted nido‐platinaboranes: [(PPh3)2PtB10H11‐8‐(OCH3)], [(PPh3)2PtB10H11‐8‐{OCH(CH3)2}] and [(PPh3)2PtB10H10‐9‐{OCH(CH3)2}]

Each of the title compounds, 8‐methoxy‐7,7‐bis­(tri­phenyl­phosphine‐P)‐8,9:10,11‐di‐μH‐7‐platina‐nido‐undecaborane di­chloro­methane hemisolvate, [Pt(CH₁₄B₁₀O)(C₁₈H₁₅P)₂]·0.5CH₂Cl₂, (I), 8‐isopropoxy‐7,7‐bis­(tri­phenyl­phosphine‐P)‐8,9:10,11‐di‐μH‐7‐platina‐nido‐undecaborane di­chloro­methane solvate, [Pt(C₃H₁₈B₁₀O)(C₁₈H₁₅P)₂]·CH₂Cl₂, (II), and 9‐isopropoxy‐7,7‐bis­(tri­phenyl­phosphine‐P)‐8,9:10,11‐di‐μH‐7‐platina‐nido‐undecaborane di­chloro­methane solvate, [Pt(C₃H₁₈B₁₀O)(C₁₈H₁₅P)₂]·CH₂Cl₂, (III), has an 11‐vertex nido polyhedral skeleton, with the 7‐platinum centre ligating to two exo‐polyhedral PPh₃ groups and an alkoxy‐substituted polyhedral borane ligand. Compounds (II) and (III) are isomers. The Pt—B distances are in the range 2.214 (7)–2.303 (7) Å for (I), 2.178 (16)–2.326 (16) Å for (II) and 2.205 (6)–2.327 (6) Å for (III).