Chromogenic azo-coupled calix[4]arenes

Novel 1,3-alternate calix[4]azacrowns having an azo chromophoric pendent group were synthesized, and their 1,3-alternate conformations were confirmed by X-ray crystal structure. In view of the hypsochromical UV band shifting upon cation complexation, azo-coupled calix[4]azacrown-5 (3) showed the most selective shifting with alkali and alkaline metal ions. In addition, 3 revealed K+ ion selectivity not only due to the size comparability between the K+ ion and the azacrown-5 loop but also due to a significant K+-pi interaction between the two aromatic rings and the K+ ion. The UV band shifting is also dependent on the lipophilicity of the species of counteranion used.     

Regioselective complexation of metal ion in chromogenic calix[4]biscrowns

A series of 1,3-alternate chromogenic azo-coupled calix[4]biscrowns in which the crown size varied with crown-5 and crown-6 have been synthesized. From the results of UV/vis band shift upon metal ion complexation, metal ions were entrapped only by the upper crown loop, causing the hypsochromic shift on the UV/vis spectra. Calix[4]bis(crown-5)(crown-6) revealed K(+) ion selectivity while calix[4]bis(crown-6)(crown-6) showed Cs(+) ion selectivity caused by a size complementarity between hosts and guest ions. From the UV band shift of 4 in which the NO(2) group is replaced by the NH(2) group, we observed bathochromic shift upon the metal ion addition, indicating that the metal ion is encapsulated in the lower crown ring because of strengthened pi-cation interaction by introducing the electron-donating NH(2) unit regardless of the steric hindrance between two azo-phenyl groups adjacent to the crown ring.     

A di-aza-benzo crown ether derived fromp-tert-butyl calix[4]arene. Synthesis and complexation of zinc cation

Di-aza-benzo crown etherp-tert-butyl calix[4]arene (1) has been prepared by hydrogenating the already known Schiff-base precursor (2). The metal ion complexing ability of (1) toward zinc cation is presented. The formation of a 2:1 (Zn: (1) complex and the location of zinc cations were deduced from¹H-NMR investigations.     

Synthesis and cation complexation of calix[4]azacrowns and a spirobiscalix[4]azacrown

The synthesis and complexation properties of three new derivatives, one spirobiscalix[4]azacrown (1) and two calix[4]azacrown (2 and 3), are reported. Complexation studies of the three ligands toward transition and heavy metal cations have been carried out and monitored by UV absorption spectrophotometry in acetonitrile. Mononuclear complexes were detected for all complexes, whereas binuclear species (M₂L) were also formed in the case of ligand 1 with Cu²⁺ and Pb²⁺. The extraction properties of 1, 2 and 3 toward Cu²⁺, Zn²⁺, Pb²⁺, Ag²⁺ and Cd²⁺ are also reported. The results showed that complexation is the main factor affecting extraction with ligands 2 and 3, while with ligand 1 it is not.     

Triazole- and azo-coupled calix[4]arene as a highly sensitive chromogenic sensor for Ca and Pb ions

A novel chromogenic calix[4]arene 3, which has within a molecule both the triazoles and the hydroxyl azophenols as the metal-binding sites and the azophenol moiety as a coloration sites was designed and synthesized. Calix[4]arene 3 is highly sensitive to Ca²⁺ and Pb²⁺ ions, which can be detected by the naked eye. Furthermore, the association constants for the 1:1 complexes of 3·Ca²⁺ and 3·Pb²⁺ were determined to be 7.06 × 10⁴ M⁻¹ and 8.57 × 10³ M⁻¹, respectively.     

Fluorescent ratiometry of tetrahomodioxacalix[4]arene pyrenylamides upon cation complexation

[structure: see text] C-1,2-alternate tetrahomodioxacalix[4]arene pyreneamides were synthesized. Pb(2+) coordination gave a quenched monomer and excimer fluorescence emission, while upon Ca(2+) ion binding, the receptor provides an enhanced excimer and declined monomer emission with ratiometric response. The excimer emission spectra changes are rationalized by frontier molecular orbitals that the effective Py-Py interaction induces emission intensity increases upon Ca(2+) ion complexation, whereas there is no such interaction observed upon Pb(2+) binding.     

提篮型杯[4]芳烃冠醚的合成及其对铯离子络合性能的研究

本文从去叔丁基化的杯[4]芳烃出发,先后分别在1,3-和2,4-酚羟基位点上引入正辛烯基和支链冠醚,最后通过烯烃复分解反应,合成了一种新型的提篮型杯芳烃冠醚化合物,产物结构经过1H NMR和HRMSESI表征确定.分别采用1H NMR和UV-vis方法,研究了1,3-桥联成环后张力对另一端冠醚环络合选择性的影响.结果表...     

Rhodium complexation with phosphoryl-containing calix[4]resorcine

Complexation of rhodium compounds with phosphoryl-containing calix[4]resorcine in ethanol and acetone has been considered. The structure and properties of the synthesized complexes have been studied by IR and Raman spectroscopy, ¹H and ³¹P NMR, EPR, UV-Vis spectroscopy, and TG/DSC. The effect of the solvent nature and conformation of a macrocyclic ligand on the structure of the resulting complexes has been observed. It has been demonstrated that one of the key factors responsible for complexation in EtOH is self-association of the ligand without the participation of the solvent. Complex formation in acetone is determined by its high ionizing ability. In diamagnetic complexes, the macrocyclic ligand is coordinated to the central atom through the phosphoryl oxygen atoms. For triaquatrichlororhodium in an aprotic medium, coordination occurs through the oxygen atoms of resorcinol moieties, which is accompanied by the formation of resorcinol radical anion and conversion of the diethoxyphosphorylaryl groups into ethoxyhydroxyphosphorylaryl moieties.     

Alkali metal cation complexation by 1,3-alternate,mono-ionisable calix[4]arene-benzocrown-6 compounds

Alkali metal cation extraction behaviour for two series of 1,3-alternate, mono-ionisable calix[4]arene-benzocrown-6 compounds is examined. In Series 1, the proton-ionisable group (PIG) is a substituent on the benzo group of the polyether ring that directs it away from the crown ether cavity. In Series 2, the PIG is attached to one para position in the calixarene framework, thereby positioning it over the crown ether ring. Competitive solvent extraction of alkali metal cations from aqueous solutions into chloroform shows high Cs⁺ efficiency and selectivity. Single-species extraction pH profiles of Cs⁺ for Series 1 and 2 ligands with the same PIG are very similar. Thus, association of Cs⁺ with the calixcrown ring is more important than the position of the PIG relative to the crown ether cavity. Solid-state structures of two unionised ligands from Series 2 are presented. Also described is a crystal containing two different ionised ligand–Cs⁺ complexes.     

The synthesis of calix[4]crown based dendrimer

A second generation of dendrimer with calixcrown as repeat unit was first synthesized. Its structure and conformation was determined by ¹H NMR and MALDI-TOF mass spectra.     

A PCT-based, pyrene-armed calix[4]crown fluoroionophore

A photoinduced charge transfer (PCT)-based 1,3-alternate calix[4]crown fluoroionophore containing two cation recognition sites, a crown ether ring and two facing pyreneamide groups, is synthesized. Upon addition of K+, Pb2+, or Cu2+, wavelength changes are observed in both the fluorescence and absorption spectra, but with different binding modes. With K+, fluorescence emissions of the ligand scarcely change, while addition of Pb2+ or Cu2+ produces a remarkable change in both the excimer and monomer emissions. The observed data indicate that the metal cation is encapsulated in the crown-5 ring for K+ and by the two facing amide groups in the latter case, which is verified by a metal ion exchange experiment. The wavelength shifts in both fluorescence and absorption spectra upon addition of Cu2+ show that, in contrast to Pb2+, Cu2+ interacts with the nitrogen atoms of the amide groups, resulting in a PCT mechanism.     

Sensing of antipyretic carboxylates by simple chromogenic calix[4]pyrroles

We present a simple, two- or three-step method for the synthesis of chromogenic octamethylcalix[4]pyrrole-based (OMCP) sensors for anions. Electrophilic aromatic substitution allows for converting the pyrrole moieties of OMCP into a dye. The formation of a sensor-anion complex results in partial charge transfer and a dramatic change in color. The absorption (UV-vis) and NMR titration experiments show that the chromogenic OMCPs sense anions administered as aqueous solutions, even at high ionic strength ( approximately 0.1 M NaCl), while displaying selectivity for pyrophosphate and carboxylate anions. The experiments with polyurethane sensor films show a strong response for aqueous carboxylates, such as antipyretics naproxen approximately ibuprofen > salicylate, without being biased by bicarbonate or carboxy termini of blood plasma proteins.     

Intermolecular complexation thermodynamics between water-soluble calix[4]arenes and diazacycloalkanes

Calorimetric titration experiments have been performed in pH 2.0 and 7.2 phosphate buffer solutions at 298.15 K to calculate the complex stability constants (K_S) and thermodynamic parameters (ΔG°, ΔH°, and TΔS°) for the stoichiometric 1:1 inclusion complexation of water-soluble calix[4]arene tetrasulfonate (CAS) and thiacalix[4]arene tetrasulfonate (TCAS) with some diazacycloalkane guests, i.e. piperazine (1), homopiperazine (2) and 1,5-diazacyclooctane (3). The results indicated that complexes of CAS and TCAS with diazacycloalkane guests were enthalpy-stabilized, and an acidic environment was more favorable to host-guest complexation than a neutral one. CAS forms more stable complexes with guest molecules than TCAS due to the more favorable enthalpic gain.     

Cesium ion selective electrode based on calix[4]crown ether-ester

The potentiometric response characteristics of cesium ion selective PVC membrane electrode employing calix[4]crown ether-ester as an ionophore were investigated. The electrode exhibit a good response for cesium ion over wide concentration range of 5.0x10(-6)-1.0x10(-1) M with a Nernstian slope of 59 mV per decade. The detection limit of electrode is 5.0x10(-6) M. The electrode was found to have selectivity for cesium ion over alkali, alkaline and transition metals. The response time of the electrode is less than 20 s and can be used for more than 4 months without observing any divergence in potentiometric response. The electrode response was stable over wide pH range.     

Supramolecular complexation studies of [60]fullerene with calix[4]naphthalenes—a reinvestigation

Estimations of equilibrium or association constant (K_ASSOC) values reported by many other groups for the supramolecular complexation between [60]fullerene (‘C₆₀’) with different macrocyclic hosts, in solvents such as toluene or carbon disulfide, for example, is often conducted by UV-vis absorption and/or ¹H NMR spectroscopy. In this paper, the complexation behaviour of two calix[4]naphthalene hosts with C₆₀ in toluene and carbon disulfide has been re-examined, using both of these methods. An analysis is presented of the data newly obtained, in light of recent advances and understanding published by others of the limitations of, in particular, the absorption spectroscopic methods. The discussion presented is also intended to aid those who may be unfamiliar with the nuances and limitations of the analytic models involving C₆₀ supramolecular complexation. Also presented is a general mechanism for C₆₀ supramolecular complexation studies, which lay the groundwork for further experiments.     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

Aggregation and complexation in a series of tetramethylenesulfonate-substituted calix[4]resorcinarenes

NMR methods are employed to study the effects of inorganic salts, solvents, and guest molecules of methylviologen (MV²⁺) and choline (Ch⁺) on the aggregation properties of water-soluble tetramethylene-sulfonate-substituted calix[4]resorcinarenes containing methyl (1), amyl (2), and heptyl (3) substituents in the lower rim. It is established that, in aqueous solutions at concentrations of 1?C10 mM, compound 1 exists in the monomeric form; the size of aggregates of amphiphilic compound 2 gradually increases (aggregation number varies from 1 to 20); and hydrophobic compound 3 dissolves only in slightly alkaline aqueous solutions to form large micellar aggregates. For macrocycles 2 and 3, which are inclined to aggregation, the aggregate sizes depend on the concentration, pH, and ionic strength of solutions, as well as on the presence of organic solvents. Macrocycle 1 binds guest molecules Ch⁺ and MV²⁺ to yield inclusion complexes. In the presence of aggregates of substance 2, the binding of guest molecules is more efficient and they are encapsulated between the rim of one molecule and the tail of another molecule of compound 2. The presence of guest molecules enhances the aggregation of macrocycle 2. In the case of compound 3 solutions, guest Ch⁺ molecules are predominantly localized in the hydrophobic environment of alkyl substituents of the host.     

Unusual stoichiometry of urea-derivatized calix[4]arenes induced by anion complexation

Calix[4]arenes bearing two p-nitrophenyl-ureido functions at the upper rim are effective anion binders. The stoichiometry of complexation depends on the substitution pattern (distal vs proximal) and anion concentration. While the distally substituted receptor forms 1:1 complexes with anions, the corresponding proximal derivative prefers the 2:1 stoichiometry (calixarene:anion) under identical conditions.     

Computational study of calix[4]arene derivatives and complexation with Zn

High level DFT was applied to study structure and conformational equilibrium of amino and mercaptocalix[4]arenes possessing methylene groups or sulfur atoms at their four junctions. All the calculations point to cone and 1,3-alternate as the most stable conformers for sulfur and methylene bridged compounds, respectively. The presence of four sulfur atoms in place of the methylene bridges can lead to novel features in the complexation with transition metals. The host–guest 1:1 complexes between Zn²⁺ and each conformer of tetraaminothiacalix[4]arene were also investigated at the same DFT level. The four nitrogens of amino groups play a dominant role in the interaction with Zn²⁺ via distorted tetrahedral coordination for 1,3-alternate, or distorted square planar for partial cone and 1,2-alternate. On the other hand, the 2:1 complexes with cone show that the sulfur bridges can also bind Zn²⁺ and contribute to form two sets of five-membered chelated rings with two N donor atoms.