UV/Vis spectra and solubility of some naphthoquinones, and the extraction behavior of plumbagin from Plumbago scandens roots in supercritical CO2

The solubility of 1,4-naphthoquinone, plumbagin, lawsone, and juglone in supercritical carbon dioxide was determined spectroscopically at 40°C, and in the pressure range 8–18 MPa. Their solubilities at 12 MPa were between 0.3 and 10 g L⁻¹. Plumbagin from Plumbago scandens L. roots was extracted at 40°C and 20 MPa. The extracted plumbagin mass fraction was up to 0.2% in fresh roots but down to about 0.006% in aged roots. n-Hexane and chloroform extraction of such aged roots indicates that the older and dryer the roots are, the stronger they bind plumbagin. Reversed-phase HPLC indicated a relatively pure plumbagin extract with supercritical carbon dioxide.      

31P NMR study on the autophosphorylation of insulin receptors in the plasma membrane

A nonradioactive ³¹P nuclear magnetic resonance (NMR) spectroscopy protocol has been developed and used to investigate in vitro autophosphorylation of insulin receptors. Optimum experimental conditions have been explored, and the effects of Mn²⁺ and phosphocreatine (PCr) on the determination of the phosphorylation reaction have been assayed. The method was used to monitor the time courses of the phosphorylation reaction in solution. The results from this NMR study were in agreement with observations of insulin receptor phosphorylation made by using Western blotting.      

Determining sulfamonomethoxine and its acetyl/hydroxyl metabolites in chicken plasma under organic solvent-free conditions

A quantitative technique is described for a sample preparation followed by high performance liquid chromatography method for the simultaneous determination of sulfamonomethoxine and its metabolites, N ⁴-acetyl SMM and 2,6-dihydroxy SMM, in chicken plasma. The average recoveries, analytical total time, and limits of quantitation were ≥80% (relative standard deviations (SD) ≤6%), <30 min sample-1 (12 samples in 2 h), and ≤0.09 μg ml⁻¹, respectively. The procedure, performed under 100% aqueous conditions, uses no organic solvents and toxic reagents at all and is, therefore, harmless to the environment and humans.      

Nanostructured electrochemical DNA biosensors for detection of the effect of berberine on DNA from cancer cells

Multi walled carbon nanotubes (MWNT) in dimethylformamide (DMF) or aqueous sodium dodecyl sulfate (SDS) solution, colloidal gold nanoparticles (GNP) in phosphate buffer solution (PBS), and a GNP–MWNT mixture in aqueous SDS solution have been investigated for chemical modification of a screen-printed carbon electrode used as the signal transducer of a dsDNA-based biosensor. Differential pulse voltammetry of the DNA redox marker and the guanine moiety anodic oxidation and cyclic voltammetry with K₃[Fe(CN)₆] as indicator revealed substantial enhancement of the response of the biosensor, particularly when MWNT in SDS solution was used. The biosensor was used in testing of berberine, an isoquinoline plant alkaloid with significant antimicrobial and anticancer activity. Berberine had a very strong, concentration-dependent, effect on the structural stability of DNA from the human cancer cells (U937 cells) whereas non-cancer cells were changed only when berberine concentrations were relatively high 75 and 50 μg mL⁻¹. Figure Schematic illustration of preparation of the nanostructured films: (a) layer-to-layer coverage (DNA/nanomaterial/SPE); (b) mixed coverage (DNA-nanomaterial/SPE)     

Sensitivity improvement in capillary electrophoresis using organo-aqueous separation buffers and thermal lens detection

It is shown that organo-aqueous separation buffers show much promise when used in capillary electrophoresis separations with photothermal (thermal lens) detection systems. Acetonitrile–water and methanol–water mixtures were selected, as conventionally used in capillary electrophoresis. It is shown that, despite more sophisticated experimental conditions (significant heat outflow from the capillary body) and peak detection, the theoretical ratio of the thermal lens signal for a binary mixture to the thermal lens signal for an aqueous solution (or the corresponding ratio obtained experimentally under bulk batch conditions) can be used to predict the sensitivity of thermal lens detection in capillary electrophoresis. The limits of detection for 2-, 3-, and 4-nitrophenols selected as model compounds in 70% v/v acetonitrile separation buffers are 1×10⁻⁶ M, 1×10⁻⁶ M and 3×10⁻⁷ M, respectively, and are therefore decreased by a factor of six compared to thermal lens detection in aqueous separation buffers. The overall increase in the thermal lens detection sensitivity in a 100% ACN buffer is a factor of 13.      

Elucidation of n-butyl benzyl phthalate biodegradation using high-performance liquid chromatography and gas chromatography–mass spectrometry

n-Butyl benzyl phthalate (BBP) is an endocrine-disrupting chemical. A bacterium species capable of using BBP as the sole source of carbon and energy was isolated from mangrove sediment. Effects of BBP concentration, pH, temperature, and salinity on BBP biodegradation were studied. The optimum pH, temperature, and salinity for the BBP biodegradation were 7.0, 37°C, and 15 g L⁻¹, respectively. BBP was completely degraded within 6 days under optimum conditions, and the biodegradation of BBP could be fitted to a first-order kinetic model. The major metabolites of BBP biodegradation were identified as mono-butyl phthalate, mono-benzyl phthalate, phthalic acid, and benzoic acid by using high-performance liquid chromatography and gas chromatography–mass spectrometry. A preliminary metabolic pathway was proposed for the biodegradation of BBP.      

Detection of bacteria by surface-enhanced Raman spectroscopy

The detection and identification of dilute bacterial samples by surface-enhanced Raman spectroscopy has been explored by mixing aqueous suspensions of bacteria with a suspension of nanocolloidal silver particles. An estimate of the detection limit of E. coli was obtained by varying the concentration of bacteria. By correcting the Raman spectra for the broad librational OH band of water, reproducible spectra were obtained for E. coli concentrations as low as approximately 10³ cfu/mL. To aid in the assignment of Raman bands, spectra for E. coli in D₂O are also reported. Figure Light scattering apparatus used to detect bacteria     

Laser ablation inductively coupled plasma mass spectrometry for direct analysis of the spatial distribution of trace elements in metallurgical-grade silicon

The spatial distribution and concentration of impurities in metallurgical-grade silicon (MG-Si) samples (97–99% w/w Si) were investigated by use of laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The spatial resolution (120 μm) and low limits of detection (mg kg⁻¹) for quality assurance of such materials were studied in detail. The volume-dependent precision and accuracy of non-matrix-matched calibration for quantification of minor elements, using NIST SRM 610 (silicate standard), indicates that LA-ICP-MS is well suited to rapid process control of such materials. Quantitative results from LA-ICP-MS were compared with previously reported literature data obtained by use of ICP-OES and rf-GD-OES. In particular, the distribution of element impurities and their relationship to their different segregation coefficients in silicon is demonstrated. Dedicated to Professor Klaus G. Heumann     

Determination of selenium in sediment by isotope-dilution inductively coupled plasma mass spectrometry with an octapole reaction cell

A method is described for determination of selenium in sediment by isotope-dilution inductively coupled plasma mass spectrometry with an octapole reaction cell (ID–ICP–ORCMS). Sediment samples were digested with HNO₃, HClO₄, and HF, and the digestion included an elaborate evaporation process to remove bromine from the digested solution. Simple strong cation-exchange disk filtration was used to remove rare earth elements (REE) from the digested solution, because REE²⁺ seriously interfere with Se isotopes (i.e. ¹⁵⁶Gd²⁺ with ⁷⁸Se⁺, ¹⁶⁰Gd²⁺ with ⁸⁰Se⁺). Addition of acetic acid to the filtrate was examined to improve the sensitivity of ICP–ORCMS measurement of Se⁺ by means of a carbon-enhancement effect. The interfering for selenium isotopes were almost eliminated by use of H₂ as reaction gas. Interference from BrH⁺ formed in the reaction cell was negligible because the Br was removed in the evaporation process. Approximately 99.5% of REE were removed by cation-exchange disk filtration yet more than 99% of Se remained in the filtrate solution. The intensity for Se⁺ was enhanced approximately fourfold by addition of 5% (v/v) of acetic acid whereas that for was barely enhanced. Measured ⁸⁰Se/⁷⁸Se ratios in unspiked digested solutions of the sample were in good agreement with that for an Se standard solution. The analytical results for Se in the certified reference materials MESS-3 and PACS-1 were in good agreement with their certified values, with small uncertainties.      

Cation identity dependence of crown ether photonic crystal Pb<Superscript>2+</Superscript> sensing

We quantitatively modeled the volume phase transition of a hydrogel containing a crystalline colloidal array with a crown ether ligand which binds Pb²⁺. The hydrogel volume response and the wavelength diffracted depend on the Pb²⁺ concentration and on both the ionic strength and the valence of the nonbinding ionic species. We successfully modeled the response of this hydrogel Pb²⁺ sensor to ionic strength and the cation valence of the added salts. Figure Cation identity dependence of crown ether photonic crystal Pb⁺ sensing     

Determination of trace elements in suspensions and filtrates of drinking and surface water by wavelength-dispersive X-ray fluorescence spectrometry

An X-ray fluorescence method (XRF) is presented that allowed low detection limits (at the 0.1–23 ng mL⁻¹ level) to be obtained for Cr, Mn, Fe, Ni, Zn, Sr, Pb, Bi and Br in water. The samples were prepared using a thin layer method. Trace elements were determined via the calibration curve and standard addition. Absorption effects and inhomogenities in prepared samples were checked for using the emission–transmission method and internal standards, respectively. The results from the XRF method were compared with the results from the inductively coupled plasma atomic emission spectrometry method.      

Determination of norfloxacin in human urine by capillary electrophoresis with electrochemiluminescence detection

A fast and sensitive approach that can be used to detect norfloxacin in human urine using capillary electrophoresis with end-column electrochemiluminescence (ECL) detection of is described. The separation column was a 75-μm i.d. capillary. The running buffer was 15 mmol L⁻¹ sodium phosphate (pH 8.2). The solution in the detection cell was 50 mmol L⁻¹ sodium phosphate (pH 8.0) and 5 mmol L⁻¹ The ECL intensity varied linearly with norfloxacin concentration from 0.05 to 10 μmol L⁻¹. The detection limit (S/N=3) was 0.0048 μmol L⁻¹, and the relative standard deviations of the ECL intensity and the migration time for eleven consecutive injections of 1.0 μmol L⁻¹ norfloxacin (n=11) were 2.6% and 0.8%, respectively. The method was successfully applied to the determination of norfloxacin spiked in human urine without sample pretreatment. The recoveries were 92.7–97.9%.      

Colorimetric detection of immunoglobulin G by use of functionalized gold nanoparticles on polyethylenimine film

A method based on use of functionalized gold nanoparticles on polyethylenimine film has been developed for colorimetric detection of immunoglobulin G (IgG). The immunogold nanoparticles were immobilized on quartz slides by recognition between antibody and antigen, with the antigen chemically adsorbed on the polyethylenimine film. By measurement of the UV–visible spectra of the immobilized immunogold, detection of h-IgG was achieved. The detection limit for h-IgG by use of this method can be as low as 0.01 μg mL⁻¹. This method is quite promising for numerous applications in immunoassay. Figure     

Highly sensitive spectrofluorimetric determination of trace amounts of lecithin

A new spectrofluorimetric method was developed for the determination of trace amounts of lecithin using the ciprofloxacin (CIP)–terbium (Tb³⁺) ion complex as a fluorescent probe. In a buffer solution at pH=5.60, lecithin can remarkably reduce the fluorescence intensity of the CIP–Tb³⁺ complex at λ=545 nm. The reduced fluorescence intensity of the Tb³⁺ ion is proportional to the concentration of lecithin. Optimum conditions for the determination of lecithin were also investigated. The linear range and detection limit for the determination of lecithin were 1.0×10⁻⁶–3.0×10⁻⁵ mol L⁻¹ and 3.44×10⁻⁷ mol L⁻¹, respectively. This method is simple, practical, and relatively free of interference from coexisting substances. Furthermore, it has been successfully applied to assess lecithin in serum samples.      

New accessory for studies of isotopic 1H/2H exchange and biomolecular interactions using transmission infrared spectroscopy

We present here a new accessory for IR transmission measurements of ¹H/²H exchange, as an ancillary tool for monitoring structural features of biomolecules in aqueous solution. This new accessory results from the combination of two dialysis membranes and a conventional liquid cell having two cylinders containing ²H₂O buffer. When compared with conventional transmission measurements, carried out either after dissolving lyophilized biomolecules in ²H₂O or after dialyzing the aqueous solution considered against ²H₂O buffer, this accessory shows the following advantages: (1) controlled measurements over the initial steps of this isotopic exchange and absence of molecular aggregation, and (2) smaller sample amounts. This new Fourier transform IR cell can also be used to analyze ligand–biomolecule and drug–cell interactions.      

Further research on the photo-SPME of triclosan

In this study the photoinduced degradation of triclosan has been investigated by photo-solid-phase microextraction (photo-SPME). In photo-SPME, photodegradation is carried out on the SPME fibre containing the target compound. Triclosan was extracted from aqueous solutions by use of polydimethylsiloxane SPME fibres and these were subsequently exposed to UV irradiation (power 8 W, wavelength 254 nm) for different times (from 2 to 60 min). The photodegradation kinetics of triclosan were investigated, the photoproducts generated were tentatively identified, and the photochemical behaviour of these products was studied by use of this on-fibre approach followed by gas chromatographic–mass spectrometric analysis. Eight photoproducts were tentatively identified, including chlorinated phenols, chlorohydroxydiphenyl ethers, 2,8-dichlorodibenzo-p-dioxin, and a possible dichlorodibenzodioxin isomer or dichlorohydroxydibenzofuran. The main photodegradation mechanisms were postulated and photodegradation pathways proposed. The effect of pH on triclosan degradation and on triclosan-to-dioxin conversion was also investigated. Triclosan degradation occurred, and generation of 2,8-dichlorodibenzo-p-dioxin was confirmed, throughout the pH range studied (from 3 to 9).      

Observation of salt-induced β-lactoglobulin aggregation using sedimentation field-flow fractionation

Sedimentation field-flow fractionation (SdFFF) was applied in order to characterize particle sizes of β-lactoglobulin aggregates induced by Ca²⁺ or Zn²⁺. Aggregation induced by Zn²⁺ was faster than that induced by Ca²⁺. Effects of Zn²⁺ and β-lactoglobulin concentrations, as well as contact time, on the aggregation of β-lactoglobulin were examined. All factors exhibited a combined effect on the size of aggregates, whereby larger aggregates were obtained at increased concentrations of Zn²⁺ and β-lactoglobulin. At fixed concentrations of 2% (w/v) β-lactoglobulin and 10 mM Zn²⁺, the particle size of the aggregates increased from 0.19 μm (at 15 min) to 0.38 μm (at 2880 min). Further, a hyphenated technique of SdFFF and inductively coupled plasma–optical emission spectrometry (ICP–OES) was used to examine whether intermolecular ionic bridges take part in salt-induced β-lactoglobulin aggregation. With SdFFF–ICP–OES, protein–cation–protein cross-linkages were observed for β-lactoglobulin aggregation induced by Zn²⁺, but not for that induced by Ca²⁺.      

A novel headspace solid-phase microextraction method for the exact determination of organochlorine pesticides in environmental soil samples

A novel method of determining organochlorine pesticides (OCPs) is described. It is based on solid-phase microextraction (SPME) and gas chromatography–electron capture detection. During the development of the method, soil samples were prepared, spiked with standard solution, and then aged for some time. Extraction conditions such as the extraction time, the NaCl content, the volume of water, the extraction temperature and the desorption time were investigated and optimized. The limits of detection obtained using the method ranged from 0.10 to 0.51 ng g⁻¹, and relative standard deviations were lower than 10% for most organochlorine pesticides. Real soil samples were successfully analyzed using the proposed method. The results from the method developed here were in good agreement with those obtained using ultrasonic extraction. The result demonstrates that aging soils spiked with standard solution is an important method development step, because the soil samples obtained using this approach are more like real soils than those obtained when aging is not used.      

Direct electrochemistry and electrochemical catalysis of immobilized hemoglobin in an ethanol–water mixture

Hemoglobin (Hb) was immobilized on a glassy carbon electrode (GCE) surface by konjac glucomannan (KGM). KGM hydrogel films on GCE have relatively high stabilities in aqueous–ethanol mixtures. The entrapped hemoglobin undergoes fast direct electron transfer reactions in aqueous–organic solvent mixtures. The peak current is bigger, the peak-to-peak separation smaller and the formal potential observed in the cyclic voltammogram is more negative for Hb–KGM/GCE in ethanol–PBS compared to Hb–KGM/GCE in PBS. The electrochemical properties of the Hb in aqueous–organic solution are almost unchanged from with those observed for the purely aqueous solution, suggesting that water pools in the KGM hydrogel play an important role in preventing changes in conformation and making proteins unreactive with polar organic solvents. The immobilized Hb was able to catalyze the reduction of nitric oxide, peroxides (hydrogen peroxide, cumene hydroperoxide, t-butyl hydroperoxide, 2-butanone peroxide), and the dehalogenation of haloethanes (hexachloroethane, pentachloroethane, tetrachloroethane, etc.). The stability and reproducibility of the modified electrode meant that it could be used to determine these substances.