共查询到19条相似文献,搜索用时 203 毫秒
1.
2.
利用结构有限元结合声有限元及边界元方法,建立了任意薄壳腔体弹性壳板振动与内外声场的耦合模型,并计算了激励力与壳板振动和内部声场之间的传递矩阵;湍流边界层脉动压力具有时空随机面激励特性,引入整体形状函数矩阵,进一步推导弹性壳板广义节点力功率谱密度函数矩阵与随机面分布激励力功率谱密度函数的关系,再利用声振耦合传递矩阵,得到弹性壳板振动和内部声场功率谱密度函数与广义节点力功率谱密度函数矩阵的关系,形成随机分布激励下任意薄壳腔体结构振动及内部声场的计算方法。以典型的内外均有声介质且一面为弹性矩形板的矩形腔声振耦合模型为例,计算了弹性壳板振动和内部声场功率谱密度函数,并与解析方法进行了比较,两者基本吻合,偏差分别为1 dB和2 dB左右。传递矩阵法不受腔体结构及其内部区域形状的制约,具有良好的适用性。 相似文献
3.
本文利用固体层状媒质声反射模型,给出了固体中含气泡层声反射和透射系数的表达式,并由此导出沿固体中含气泡薄层对称和反对称模式界面波的特征方程式。本文还介绍了含气泡固体有效弹性模量的估算方法,文中给出的数值计算具体说明了气泡体积浓度和气泡层厚度对声反射系数、声透射系数以及反对称模式界面波传播速度的影响,本文的研究为根据声反射系数和界面波的传播速度的测量反演固体间气泡层的力学性能提供了理论依据。
关键词: 相似文献
4.
将弱电离尘埃等离子体复介电常数表示以jω 为自变量的分式多项式形式, 利用移位算子时域有限差分(SO-FDTD)方法, 给出了弱电离尘埃等离子体频域本构关系的时域形式. 推导了弱电离尘埃等离子体电磁特性的时域递推关系式. 用SO-FDTD方法计算了弱电离尘埃等离子体层的反射和透射系数, 分析了尘埃粒子浓度和尘埃粒子半径的变化对反射系数和透射系数的影响. 结果表明: 有尘埃粒子时的反射系数比没有尘埃粒子时反射系数小, 而透射系数要比没有尘埃粒子时的透射系数大; 当尘埃粒子浓度或尘埃粒子半径增大时, 其反射系数均减小. 相似文献
5.
6.
引入四维波矢的概念,推导出弹性波斜入射到多层介质系统时的转移矩阵以及透射系数和反射系数。利用这些公式计算了纵波和横波正入射到一维掺杂声子晶体时纵波和横波的透射系数。得出:当纵波正入射时,透射波中纵波在一定频率范围内出现了禁带,并且在禁带的中心频率处出现了缺陷模。当横波正入射时也有相同的结果。 相似文献
7.
为评估覆盖层的吸声性能,研究黏弹层在无限大周期加肋双层板背衬下的声反射。首先通过弯曲波与Lamb波的比较,揭示了板近似理论不适用于黏弹性板的原因。为此采用(黏)弹性理论处理(黏)弹性板,而肋板的处理则采用板近似理论,并用Hull提出的方法解决肋板和平板的耦合问题,得到反射声场的解。与板近似理论计算加肋双层板声反射的结果进行比较验证了本文方法的正确性,对反射系数进行计算分析了背衬对声反射的影响,定义平均反射系数比较了不同覆盖层的性能。结果表明,频率较低时覆盖层无法有效抑制背衬的影响,板间流体层与双层板的耦合作用引起共振散射,肋板与双层板的耦合作用降低声反射。 相似文献
8.
9.
10.
针对充液管路系统噪声有源控制问题,研究了次级源和误差传感器布放对带弹性障板的充液直管管路系统有源消声与有源消振复合控制效果的影响。基于声固耦合方法建立了带弹性障板的充液直管管路系统的有限元模型,在声激励下对比了次级声源布放对系统有源消声性能的影响,并在组合激励下分析了次级力源、次级声源和误差传感器布放对系统复合有源控制的影响。结果表明,非对称分布的次级声源容易激起管壁振动,进而带动障板振动,导致有源消声效果不佳;采用对称分布的次级声源可使低频段的降噪量提高10 dB以上。复合有源控制可进一步提升全频段的控制效果。通过增加振动误差传感器数量,可使绝大多数频点的降噪量提高1~20 dB不等。此外,在管壁上布放的两圈次级力源的间距小于管壁振动波长的1/4,且都不位于管壁振动节点附近时控制效果更好。 相似文献
11.
12.
为实现水下宽带隔声,提出了一种由弹性元件支撑两块刚性端板构成的双层弹性支撑板结构。采用弹簧振子振动分析法和声传播理论,建立了平面波入射的水下隔声理论模型,分析了结构参数对隔声量的影响规律,结果表明足够小的弹性元件单位面积弹性系数或足够大的端板单位面积质量都可以连续一致地提高隔声量.仿真分析了双层弹性支撑板的振动位移和声输入阻抗,比较了双层弹性支撑板与连续介质层的隔声特性,结果表明,降低弹性元件质量,有助于在低频段消除半波全透射现象.在同厚度、同质量、同静态压缩率条件下,双层弹性支撑板能更好的降低两侧流体的振动及声耦合,隔声频带更宽,带内一致性更好,隔声量更大. 相似文献
13.
14.
A Lamb wave interdigital transducer mounted on a layered substrate composed of two plates, a thin piezoelectric ceramic plate and an acrylic plate, operating at a liquid-solid boundary, is investigated for ultrasonic nondestructive testing of the layer thickness in human teeth. A higher-order mode having a phase velocity higher than the longitudinal wave velocity in the human teeth can be used for nondestructive testing. In the combination of the two layers, the fourth mode of leaky Lamb wave is most favorable for a frequency-controllable radiation angle of an ultrasound beam into a water layer as an acoustic coupler. In the configuration of an acoustic delay line, the layer-thickness measurement in vivo, evaluated from the time interval between two reflected ultrasound echoes, is successfully realized under a thin water layer as the acoustic coupler. 相似文献
15.
P.J.T. Filippi 《Journal of sound and vibration》1983,91(1):65-84
In has been shown that the sound field reflected by the plane boundary of a layered ground can always be described by a specularly reflected wave, and layer potentials. Despite its generality, this representation is not quite suitable for numerical computation. Dealing with a very simple case, Weyl, and later on Ingard and Thomasson, proposed a representation of the solution in which the layer potential terms are replaced by the sum of surface wave and a Laplace type integral. Such an integral is very convenient for numerical purposes. In this paper, it is shown that this kind of representation can be obtained for a very wide class of sound propagation problems above or within layered media: a half-space bounded by a locally reacting surface, a finite layer of porous medium, a porous medium with depth-varying porosity, a thin elastic plate; wave propagation in shallow water with an impedance bottom. Many other applications could be developed. 相似文献
16.
WANG Yaojun 《声学学报:英文版》1993,(2)
Using a general mode for sound reflection from multilayered media,we present in this paper the expressions for sound reflection and transmissioncoefficients on void-containing interface layer in solid and derive the character-istic equation for symmetric and antisymmetric modes of the interface wavesalong the layer.The method for evaluating the effective elastic moduli ofvoid-containing solid is also introduced.The numerical calculation given in thispaper shows the influences of the void volume concentration and layer thick-ness on the sound reflection coefficients and interface wave velocity,providing atheoretical basis for inverse of the mechanical properties of void-containinglayer based on the ultrasonic measurement. 相似文献
17.
18.
运用FDTD(时域有限差分法)研究了弹性波/声波通过二维正方形排列的铁/水声子晶体的传播特性.发现铁/水声子晶体在高频范围存在完全带隙,软包层铁/水声子晶体在低频范围出现共振带隙,它们分别对应于不同的带隙形成机理.通过铁/水声子晶体和软包层铁/水声子晶体的组合,可以得到从高频到低频的组合宽带隙结构,从而达到在更宽频范围内控制弹性波传播的目的;而且通过调整包层的厚度、铁芯的大小、以及填充率等结构参数,可以有效地调节组合宽带隙的频率结构. 相似文献
19.
The effect of a metal layer over an elastic substrate on surface acoustic wave propagating in the structure can be evaluated precisely for semi-infinite solids and infinite plates, but there is no accurate analytical solution if the finite size of the plate has to be considered. By expanding displacements with eigensolutions of surface acoustic waves in a semi-inifite solid, a set of two-dimensional equations similar to the Mindlin plate theory are obtained. Then for a thin electrode layer, the effect is considered through the approximation of displacements in the metal layer with the ones in the substrate, and an integration over the thickness incorporated the properties of the metal layer into equations through the modification of material properties with the decaying indices of surface acoustic waves and the thickness of the metal layer. Using AT-cut quartz crystal as the substrate, we present the effect of silver electrode layers of finite thickness on the phase velocity of propagating surface acoustic waves. 相似文献