Synthesis and photocatalytic performance of Ag/AgCl/ZnO tetrapod composites

Ag/AgCl is a visible-light plasmonic photocatalyst that has attracted considerable attention because of its high visible-light absorption and activity owing to the surface plasmon resonance of noble-metal nanoparticles. In this study, Ag/AgCl/ZnO tetrapod composite was prepared by introducing ZnO tetrapods into Ag/AgCl prepared by a polydopamine reduction route. Ag/AgCl was densely deposited on the three-dimensional support framework provided by the ZnO tetrapods. The framework possessed a certain degree of porosity, thereby improving the specific surface area of the Ag/AgCl/ZnO composite. The interaction of ZnO with Ag/AgCl further increased the separation and transfer of electron–hole pairs. The Ag/AgCl/ZnO composite showed excellent photocatalytic activity and good stability. Under xenon lamp irradiation for 20 min, degradation of rhodamine B reached 90%. After four recycling tests, degradation remained stable without any sign of reduction. Ag/AgCl/ZnO tetrapod composite is shown to be a kind of green photocatalyst offering high activity, good stability, and recyclability.

     

The preparation of a fast response Ag/Ag2SO4 reference electrode

A procedure for the preparation of a fast response Ag/Ag(2)SO(4) reference electrode to be used for the detection of the endpoint of a coulometric titration is described.     

Development of a micro-planar Ag/AgCl quasi-reference electrode with long-term stability for an amperometric glucose sensor

This paper reports a micro-planar Ag/AgCl quasi-reference electrode (QRE) with long-term stability which is characterized by both long-term potential stability and practical immunity to interference species, and which has been applied for use with an amperometric glucose sensor for plasma glucose. For fabrication, we coated a silver/silver chloride (Ag/AgCl) electrode first with γ-aminopropyltriethoxysilane (γ-APTES) and then with perfluorocarbon polymer (PFCP). Tests demonstrate the new electrode’s ability to remain stable over an 82-day period in 150 mM KCl, and also show its imperviousness to the effects of interference species (1 mM KI and 1 mM KBr), pH, and serum. Furthermore, in tests for glucose concentrations in plasma samples, a good correlation coefficient, 0.954 (n=30, Y=1.02X+0.20), was demonstrated between results obtained with a clinical analyzer and those obtained with an amperometric glucose sensor that used the developed Ag/AgCl QRE, showing that the Ag/AgCl QRE functions well as a reference electrode for plasma samples.     

A simple approach for fabrication of dual-disk electrodes with a nanometer-radius electrode and a micrometer-radius electrode

We developed a new simple approach to fabricate dual-disk electrodes with a nanometer-radius electrode and a micrometer-radius electrode. First, nanometer-sized electrodes and micrometer-sized electrodes were constructed using 10-μm-radius metal wires, respectively. To fabricate the nanometer-sized electrode, after the apex of the 10-μm-radius metal wire was electrochemically etched to an ultrafine point with a nanometer-radius, the metal wire was electrochemically coated with a phenol-allyphenol copolymer film. The micrometer-sized electrode was fabricated by directly electrochemical coating the metal wire with an extremely thin phenol-allyphenol copolymer film. Then, the nanometer-radius electrode (the first electrode) and the 10-μm-radius electrode (the second electrode) were inserted into two sides of a thick-septum borosilicate theta (θ) tubing, respectively. The second electrode protruded from the top of the θ tubing. The top of the θ tubing was sealed with insulating ethyl α-cyanoacrylate. The top of the θ tubing with both electrodes was ground flat and polished successively with fine sandpaper and aluminum oxide powder until the tip of the first electrode was exposed. Since the second electrode protruded from the top of the θ tubing, its 10-μm-radius tip was naturally formed during polishing. The dual-disk electrodes were characterized by scanning electron microscopy and cyclic voltammetry. The success rate for fabrication of the dual-disk electrodes is ∼80% due to double insurance from two coating layers of different polymers.     

Certification of SRM 1589a PCBs,pesticides, PBDEs,and dioxins/furans in human serum

The Certificate of Analysis for SRM 1589a PCBs, Pesticides, PBDEs, and Dioxins/Furans in Human Serum has been updated to include certified concentration values for 27 polychlorinated biphenyl (PCB) congeners, three chlorinated pesticides, and four polybrominated diphenyl ether (PBDE) congeners as well as reference concentration values for 27 additional PCB congeners, six additional chlorinated pesticides, three additional PBDE congeners, and selected polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). This represents an addition of concentration values for 29 PCB congeners and for PBDE congeners that were not quantified in the previous issue of SRM 1589a. With the increased number of certified and reference concentration values for PCBs and the inclusion of certified and reference concentration values for PBDEs, this serum material will be more useful as a reference material for contaminant monitoring in human tissues and fluids. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Sonochemical synthesis of Ag/AgCl nanocubes and their efficient visible-light-driven photocatalytic performance

A novel one-step sonochemical approach to synthesize a plasmonic photocatalyst of AgCl nanocubes (ca. 115 nm in edge length) with a small amount of Ag metal species is presented. The nanoscale Ag/AgCl hybrid photocatalysts with cubic morphology are readily formed under ambient ultrasonic conditions and neither external heat treatment nor reducing agents are required. The size of the Ag/AgCl photocatalysts could be controlled by changing the concentrations of Ag(+) ions and polyvinylpyrrolidone molecules in precursor solutions. The compositions, microstructures, influencing factors, and possible growth mechanism of the Ag/AgCl hybrid nanocubes were systematically investigated. The Ag/AgCl photocatalysts show excellent photocatalytic performance for degradation of various dye molecules under visible light.     

流动注射比浊法测定人体血清总蛋白

基于磺基水杨酸 硫酸钠混合试剂与蛋白质发生浊度反应,设计了具有一个汇合点的FIA单道流路,运用正交实验优化了影响比浊反应的主要因素,并探讨了流动注射分析条件,从而提出了流动注射比浊法测定人血清中总蛋白的新方法。本法实验结果与双缩脲法一致,每小时进样60次,线性范围为0.14～1.40mg mL。     

Automated free-solution isotachophoresis: Instrumentation and fractionation of human serum proteins

An automated free-solution isotachophoresis system (FS-ITP) for preparative fractionation of biopolymers is described, operated in a batch mode. The dimension of the separation chamber allows an up to 1200-fold higher sample load compared to separation in capillaries of 180 μm inner diameter as used in analytical capillary isotachophoresis (C-ITP). The preparative capacity of the system is within the milligram range. The method is fully compatible with analytical C-ITP, which is essential for preparative-scale isotachophoresis with regard to optimization of electrolyte systems and the search for suitable spacers. As a model application the fractionation of human serum proteins is reported. The collected fractions were analyzed by C-ITP and agarose gel electrophoresis.     

On-line SFE-GC for determination of PCBs in human milk and blood serum

On-line coupled supercritical fluid extraction and gas chromatography (SFE-GC) has been utilized for the determination of PCBs and other organochlorine compounds in human milk and blood serum. The procedure involved preconcentration of the sample on C₁₈-silica sorbent in an extraction cell: after precipitation of the proteins up to 20 ml of human milk was concentrated on 0.5 g of sorbent. Serum (up to 5 ml) was applied to the C₁₈ material without pretreatment. Basic alumina was utilized as a selective adsorbent for lipids in the on-line SFE-GC system. The method was used to analyze milk and serum spiked with 0.5 and 10 ng of Aroclor 1260 and the results compared with those obtained by liquid–liquid extraction of serum.     

Quantitative determination of lansoprazole in human serum by HPLC

Summary Lansoprazole is a new inhibitor of gastric proton secretion. An HPLC method for the quantitative determination of lansoprazole in serum is described. The method consists of liquid-liquid extraction and enrichment of the analyte and subsequent reverse-phase liquid chromatography with UV detection. The method is specific, sensitive and practical. It has been applied to serum from healthy volunteers. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Cathodic stripping voltammetric detection and determination at a hanging mercury-drop electrode of dye contaminants in purified biomaterials: study of the human serum albumin and reactive dye 120 system

Procion red HE-3B (RR120) is an example of dye currently used in affinity purification. A method is described for determining trace amounts of RR120 dye contaminant in human serum albumin by cathodic stripping voltammetry. The method is based on a measure of a well-defined peak at −0.58 V, obtained when samples of HSA protein (0.01-2% w/v) containing dye concentrations are submitted to a heating time of 330 min at 80 °C in NaOH, pH 12.0 and the samples are removed to a solution containing Britton-Robinson buffer, pH 4.0. Using an optimum accumulation potential and time of 0 V and 240 s, respectively, linear calibration curves were obtained from 1.0×10⁻⁹ to 1.0×10⁻⁸ mol l⁻¹ for RR120 dye. Leakage/hydrolysis of reactive red 120 from an agarose support (e.g. at pH 2 or 12) can also be conveniently determined at very low levels (sub-μg ml⁻¹) by means of cathodic stripping voltammetry, which involves adsorptive accumulation of the dye onto the hanging mercury-drop electrode.     

基于Ag/AgCl丝双涂膜司帕沙星选择电极的研制与应用

以Ag/AgCl丝为基体依次外涂含0.1 mol/L KCl的琼脂凝胶膜及含四苯硼-司帕沙星缔合物的PVC膜,制备了一种双涂膜司帕沙星选择电极。采用正交设计法,研究了离子缔合物的种类、活性物在膜中的浓度及增塑剂三因素对电极的影响。电极的线性范围为1.0×10-5~1.0×10-3mol/L,检出限为2.4×10-6mol/L,斜率为28.8 mV/decade(16℃),可直接用于司帕沙星片剂的含量测定,回收率为99.6%~101.1%,结果与文献法一致。     

The preparation of a fast response Ag/Ag 2SO 4 reference electrode

A procedure for the preparation of a fast response Ag/Ag₂SO₄ reference electrode to be used for the detection of the endpoint of a coulometric titration is described.     

Molecularly imprinted solid-phase extraction for the selective determination of bromhexine in human serum and urine with high performance liquid chromatography

In this work, a novel method is described for the determination of bromhexine in biological fluids using molecularly imprinted solid-phase extraction as the sample cleanup technique combined with high performance liquid chromatography (HPLC). The water-compatible molecularly imprinted polymers (MIPs) were prepared using methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross-linker, chloroform as porogen and bromhexine as the template molecule. The novel imprinted polymer was used as a solid-phase extraction sorbent for the extraction of bromhexine from human serum and urine. Various parameters affecting the extraction efficiency of the polymer have been evaluated. The optimal conditions for molecularly imprinted solid-phase extraction (MISPE) consisted of conditioning 1 mL methanol and 1 mL of deionized water at neutral pH, loading of 5 mL of the water sample (25 μg L⁻¹) at pH 6.0, washing using 2 mL acetonitrile/acetone (1/4, v/v) and elution with 3× 1 mL methanol/acetic acid (10/1, v/v). The MIP selectivity was evaluated by checking several substances with similar molecular structures to that of bromhexine. Results from the HPLC analyses showed that the calibration curve of bromhexine using MIP from human serum and urine is linear in the ranges of 0.5-100 and 1.5-100 μg L⁻¹ with good precisions (3.3% and 2.8% for 5.0 μg L⁻¹), respectively. The recoveries for serum and urine samples were higher than 92%.     

Measurement of bisphenol A in human serum by gas chromatography/mass spectrometry

The purpose of this study is to establish an easy and accurate method for the determination of bisphenol A (BPA) in the human serum. The samples were applied to the C₁₈ solid phase extraction (SPE) column for clean up of samples. The BPA is conjugated with tetrabutylammonium hydrogen sulfate as the counter ion in alkali solution. The ion paired BPA is moves from the aqueous phase to the organic phase as an ion paired extraction. BPA extracted from human serum were derivatized with pentafluorobenzyl bromide (PFBBr). The derivative was analyzed by gas chromatography (GC)/mass spectrometry (MS) using negative chemical ionization (NCI). The instrumental detection limit of BPA was 5 pg/ml (10 fg). The instrumental response between 0.01 and 100 pg/ml of BPA standards was linear (r²=0.998). The recovery of BPA spiked into human serum was 101.0±4.63 (1 pg/ml) and 100.9±3.75 (10 pg/ml), respectively. The concentration of BPA in the human serum from 20 individuals was 0.54 pg/ml.     

Separation of lansoprazole enantiomers in human serum by HPLC

Summary A new and simple HPLC method is described for the separation and quantitative determination of the (+)-and (−)-enantiomers of lansoprazole. The analytes were extracted from serum as previously described for whole lansoprazole [K. Borner, Chromatographia 45, 450–452 (1997)]. The enantiomers were separated by chromatography on a CHIRAL-AGP^R column which contained covalently bound acid α₁-glycoprotein as chiral selector. In the pure drug the (−)/(+) ratio was 0.99:1.01. In serum of twelve human volunteers the concentration of the (−)-enantiomer was 3 to 5 times higher than that of the (+)-enantiomer. Both enantiomers differ remarkably in their pharmacokinetics.     

钙黄绿素分光光度法测定人血清白蛋白

基于在pH为3.5的Clark-Lubs缓冲溶液条件下,人血清白蛋白与钙黄绿素结合使钙黄绿素的吸光度降低的原理,建立了钙黄绿素分光光度法测定人血清白蛋白测定方法,质量浓度在1.14～17.1 mg/L范围内,吸光度的降低与人血清白蛋白质量浓度呈线性关系,检出限为0.94 mg/L.     

布南色林与人血清白蛋白相互作用的光谱学研究

采用荧光光谱研究了模拟生理务件下抗精神病药布南色林与人血清白蛋白的相互作用,结果表明,布南色林对人血清白蛋白的内源性荧光具有猝灭作用且猝灭方式为静态猝灭.布南色林与人血清白蛋白形成了1∶1的复合物,结合常数K=1.80×104L/mol,且金属离子对结合反应具有较显著的影响.根据不同温度下的热力学函数确定了布南色林与人...     

Preparation and photocatalytic activity of carbon dot/Ag/AgCl

CD (carbon dot)/Ag/AgCl compound photocatalysts with different compounding degrees were prepared via a precipitation method, and their physiochemical properties were characterized by X‐ray diffraction, FE‐SEM, UV–vis and the like. Through the degradation experiment of methyl orange (MO), the effects of different compounding amount and methyl orange concentration on photocatalytic degradation were investigated to find the best ratio. It was found the photocatalytic activity of CD/Ag/AgCl was significantly higher than Ag/AgCl, and the best compounding dosage was 6 mg/l carbon dot. The degradation rate of CD/Ag/AgCl was lower when the initial MO concentration was higher. Five repeated experiments were conducted to test the stability of the catalysts, and showed the MO degradation rates were all above 85%, indicating the CD/Ag/AgCl compound photocatalysts all showed high stability and repeatability. The reaction mechanism of CD/Ag/AgCl photocatalyst was studied by electrochemical experiments and ESR experiments. The results show that the doping of CD effectively improves the photocatalytic degradation ability of MO.     

Fluorescence study on the interaction of human serum albumin with bromsulphalein

The binding of bromsulphalein (BSP) with human serum albumin was investigated at different temperatures, 298 and 308 K, by the fluorescence spectroscopy at pH 7.24. The binding constant was determined by Stern-Volmer equation based on the quenching of the fluorescence HSA in the presence of bromsulphalein. The effect of various metal ions on the binding constants of BSP with HSA was investigated. The thermodynamic parameters were calculated according to the dependence of enthalpy change on the temperature as follows: DeltaH and DeltaS possess small negative (9.3 kJ mol(-1)) and positive values (22.3 J K(-l)mol(-l)), respectively. The experimental results revealed that BSP has a strong ability to quench the intrinsic fluorescence of HSA through a static quenching procedure. The binding constants between BSP to HSA were remarkable and independent on temperature. The binding constants between HSA and BSP decreased in the presence of various ions, commonly decreased by 30-55%. The hydrophobic force played a major role in the interaction of BSP with HSA. All these experimental results and theoretical data clarified that BSP could bind to HSA and be effectively transported and eliminated in body, which could be a useful guideline for further drug design.