Influence of the Nanoscale Morphology on the Photovoltaic Properties of Fullerene/MEH-PPV Composites

The relation between morphology and photoelectric properties of PPV derivatives/fullerene composites forming bulk heterojunction solar cells has been investigated. The solvent used to spin cast the photoactive layers has a main influence on the quenching of the MEH-PPV fluorescence, which could be attributed to different dispersion abilities of C₆₀ in the polymer layer shown by AFM microscopy. Formation of large fullerene aggregates is observed at fullerene concentrations of the order of 10% leading to phase separation for composite layers processed in THF, whereas more dispersed distributions of fullerenes are observed in an aromatic solvent like ODCB which accounts for a more efficient luminescence quenching with increasing filler concentrations. However the improvement of the dissociation of photogenerated charge pairs is counterbalanced by a less efficient charge transport in the composite shown by lower short circuit currents probably due to unfavorable polymer chain arrangement in ODCB. Thin film processing conditions have been modified by the preparation of blends of solutions of the polymer in THF and fullerene in ODCB. The resulting spin casted layers show improved morphologies implying better dispersion of the fullerenes and increased short circuit currents. The improvement of the photovoltaic properties of the MEH-PPV/C₆₀ composites has been attributed to the nanosized fullerene domains formed upon phase separation.     

Structure and electronic properties of highly charged C60 and C58 fullerenes

We present a theoretical study of the structure and electronic properties of positively charged C60(q+) and C58(q+) fullerenes (q = 0-14). Electronic energies and optimum geometries have been obtained using density-functional theory with the B3LYP functional for exchange and correlation. We have found that closed- and semiclosed-shell C60(q+) ions (q = 0, 5, and 10) preserve the original icosahedral symmetry of neutral C60. For other charges, significant distortions have been obtained. The C58(q+) fullerenes are, in general, less symmetric, being C58(8+) the closest to the spherical shape. Most C60(q+) fullerenes follow Hund's rule for spin multiplicity, while most C58(q+) fullerenes are more stable with the lowest spin multiplicity. The calculated ionization potentials for both kinds of fullerenes increase almost linearly with charge, except in the vicinity of C60(10+) and C58(8+). We have also explored the region of the potential-energy surface of C60(q+) that leads to asymmetric fission. Minima and transition states corresponding to the last steps of the fission process have been obtained. This has led us to conclude that, for 3 < or = q < or = 8, C2(+) emission is the preferred fragmentation channel, whereas, for higher q values, emission of two charged atomic fragments is more favorable. The corresponding fission barrier vanishes for q > 14.     

支链带有富勒烯的聚噻吩和齐聚噻吩及其光伏电池研究进展

可溶性聚噻吩和富勒烯(主要是C60)及其衍生物,是聚合物太阳能电池中被广泛使用的给体和受体材料,它们之间的相容性和富勒烯的聚集效应对于太阳能电池能量转换效率有很大影响。将富勒烯与聚噻吩通过共价键连接在一起,可解决它们的共混膜中的相分离问题,有望提高器件效率,是未来有机和聚合物光伏材料研究的一个重要方向。本文按主链是聚噻吩或齐聚噻吩将这种连有富勒烯的材料分为两类,介绍了这些材料的合成方法、电化学性质及基于这些材料的太阳能电池器件近几年来的研究进展。     

Stabilizing bicontinuous nanophase segregation in piCP-C60 donor-acceptor blends

The synthesis and thin film properties of a conjugated polymer bearing graft chains that are compatible with a fullerene, chemically modified with a similar motif, are described. The graft copolymer, obtained by nitroxide-mediated radical polymerization of a vinyl triazole onto a postfunctionalized poly(3-hexylthiophene) (P3HT) backbone, is blended with a fullerene modified with a pendant triazole functionality (TAZC60). For a given ratio of polymer:TAZC60, graft copolymer (P3HT-g-PVTAZ:TAZC60) blends exhibit substantially reduced photoluminescence compared to P3HT:TAZC60 blends, while TEM analysis reveals the graft polymer undergoes extensive mixing with the fullerene to form bicontinuous 10 nm phase domains. Graft polymer blends annealed for 1 h at 140 degrees C retain their nanometer phase separation as evidenced by TEM, UV-vis, XRD, and photoluminescence analysis, and phase purity was enhanced. In contrast, P3HT:TAZC60 blends exhibit micron-sized phase-segregated morphologies before and after annealing. The chemical similarity of the triazole functionality attached to P3HT and the fullerene leads to the formation of films with uniform, stable, nanophase morphologies. This strategy may prove a useful strategy for controlling the extent of phase segregation in electron donor and acceptor blends of pi-conjugated polymers (piCPs) and fullerenes.     

Friction and normal interaction forces between irreversibly attached weakly charged polymer brushes

Polyelectrolyte brushes were built on mica by anchoring polystyrene-poly(acrylic acid) (PS-b-PAA) diblock copolymers at a controlled surface density in a polystyrene monolayer covalently attached to OH-activated mica surfaces. Compared to physisorbed polymer brushes, these irreversibly attached charged brushes allow the polymer grafting density to remain constant upon changes in environmental conditions (e.g., pH, salt concentration, compression, and shear). The normal interaction and friction forces as a function of surface separation distance and at different concentrations of added salt (NaCl) were investigated using a surface forces apparatus. The interaction force profiles were completely reversible both on loading and receding and were purely repulsive. For a constant polymer grafting density, the influence of the polyelectrolyte charges and the Debye screening effect on the overall interaction forces was investigated. The experimental interaction force profiles agree very well with scaling models developed for neutral and charged polymer brushes. The variation of the friction force between two PAA brushes in motion with respect to each other as a function of surface separation distance appeared to be similar to that observed with neutral brushes. This similarity suggests that the increase in friction is associated with an increase in mutual interpenetration upon compression as observed with neutral polymers. The effect of the PAA charges and added ions was more significant on the repulsive normal forces than on the friction forces. The reversible characteristics of the normal force profiles and friction measurements confirmed the strong attachment of the PAA brushes to the mica substrate. High friction coefficients (ca 0.3) were measured at relatively high pressures (40 atm) with no surface damage or polymer removal.     

Particle interactions in kaolinite suspensions and corresponding aggregate structures

The surface charge densities of the silica face surface and the alumina face surface of kaolinite particles, recently determined from surface force measurements using atomic force microscopy, show a distinct dependence on the pH of the system. The silica face was found to be negatively charged at pH>4, whereas the alumina face surface was found to be positively charged at pH<6, and negatively charged at pH>8. The surface charge densities of the silica face and the alumina face were utilized in this study to determine the interaction energies between different surfaces of kaolinite particles. Results indicate that the silica face-alumina face interaction is dominant for kaolinite particle aggregation at low pH. This face-face association increases the stacking of kaolinite layers, and thereby promotes the edge-face (edge-silica face and edge-alumina face) and face-face (silica face-alumina face) associations with increasing pH, and hence the maximum shear-yield stress at pH 5-5.5. With further increase in pH, the face-face and edge-face association decreases due to increasing surface charge density on the silica face and the edge surfaces, and decreasing surface charge density on the alumina face. At high pH, all kaolinite surfaces become negatively charged, kaolinite particles are dispersed, and the suspension is stabilized. The face-face association at low pH has been confirmed from cryo-SEM images of kaolinite aggregates taken from suspension which show that the particles are mostly organized in a face-face and edge-face manner. At higher pH conditions, the cryo-SEM images of the kaolinite aggregates reveal a lower degree of consolidation and the edge-edge association is evident.     

Interaction forces between silica surfaces in aqueous solutions of cationic polymeric flocculants: effect of polymer charge

Three cationic polymers with molecular weights and charge density of 3.0 x 10(5) g/mol and 10% (D 6010), 1.1 x 10(5) g/mol and 40% (D6040), and 1.2 x 10(5) g/mol and 100% (D6099) were investigated in aqueous NaCl solutions in the presence of silica. The atomic force microscope (AFM) colloidal probe technique was used to determine silica interparticle interaction forces, which were compared to macroscopic information on the strength of interactions such as compressive yield stress measurements. It was found that in 30 mM NaCl solution the 10% charged polymer produced steric repulsion upon approach and long-range adhesion with multiple pull off events upon retraction at the optimum flocculation concentration. This suggests that the polymer was adsorbed in a conformation where segments extend from the surface, resulting in bridging flocculation. The 40 and 100% charged polymers produced attraction upon approach and strong adhesion with snap out from contact upon separation at optimum polymer dosages. This suggests that these polymers are adsorbed with flat conformations and is typical of charge neutralization or patch attraction. The attractions for 40 and 100% charged polymers measured with the AFM are significantly larger than for the 10% charged polymer. The polymer dose that produced the optimum flocculation and the maximum compressive yield stress typically corresponded to the polymer concentration that produced the maximum adhesion for each polymer. It was found that the magnitude of the adhesive force was more significant in determining the compressive yield stresses of the silica particle sediments than the aggregate size and structure.     

Temperature-responsive solid-liquid separations with charged block-copolymers of poly(N-isopropyl acryamide)

Temperature responsive charged block-copolymers of poly(N-isopropylacrylamide) (PNIPAM) have been used in the solid-liquid separation of alumina mineral particles from aqueous solution. The effects of temperature, polymer charge-sign and fraction of charged segment have been investigated. Batch settling and adsorption studies showed that rapid sedimentation results for suspensions with polymers of opposite charge-sign to the particle surface-charge (counterionic) at 50 °C. Cooling the suspensions after flocculation at 50 °C was found to increase the final solids volume fraction of the sediment beds formed through a mechanism related to partial desorption of polymer and the reduction of the hydrophobic attraction. Suspension stability results after dosing with polymers of similar charge-sign to the particle surface-charge (co-ionic) at both 25 and 50 °C. Increasing the amount of polymer charge increased the influence of polymer charge-sign on the adsorption and solid-liquid separation behavior. The performance of the charged block copolymers are compared to that of the random charged copolymer and neutral homopolymer PNIPAM structures.     

The influence of polyelectrolyte charges of polyurethane membrane surface on the growth of human endothelial cells

A novel technique to introduce free amino groups onto polyester scaffolds via aminolyzing the ester groups with diamine has been developed recently. The introduction of the free amino groups on these polyester surfaces provides us the possibility to modify polymer surface in a simpler manner, e.g. layer-by-layer assembly of charged species. By this technique, many negatively and positively charged biopolymers were deposited alternatively on polyurethane surface. The deposition process was monitored by fluorescence spectroscopy and advancing contact angle measurements. The result of human endothelial cells cultured in vitro showed that cells on negatively charged surface could not spread and flatten well due to the electrostatic repulsion. The lower attachment ratio induced the lower proliferation ratio. However, after the surface charge was inversed by collagen, both attachment and proliferation ratios increased to different extent. Observed under SEM, cells also presented a flat and spreading morphology.     

Adsorption of midmolecular peptides by fullerene modified silica gel

The adsorption properties of raw and processed silica gels and of silica gels modified with fullerene (fullerene-silica gel nanosystems) toward serum midmolecular peptides of ischemic origin were examined. A high adsorption capacity of the nanosorbents was found. The influence of fullerenes on the condition of silica gel was studied by solid-state NMR, and an increase in the silanol fraction at the adsorbent surface was demonstrated. It was shown that presence of fullerene C₆₀ in nanosorbents enables oxidation reaction of the adsorbed peptides, i.e., sorption of metabolites.     

Mesoscale simulations of the behavior of charged polymer brushes under normal compression and lateral shear forces

Dissipative particle dynamics (DPD) was used to investigate the behavior of two opposing end-grafted charged polymer brushes in aqueous media under normal compression and lateral shear. The effect of polymer molecular weight, degree of ionization, grafting density, ionic strength, and compression on the polymer conformation and the resulting shear force between the opposing polymer layers were investigated. The simulations were carried out for the poly(tert-butyl methacrylate)-block-poly(sodium sulfonate glycidyl methacrylate) copolymer, referred as PtBMA-b-PGMAS, end-attached to a hydrophobic surface for comparison with previous experimental data. Mutual interpenetration of the opposing end-grafted chains upon compression is negligible for highly charged polymer brushes for compression ratios ranging from 2.5 to 0.25. Under electrostatic screening effects or for weakly charged polymer brushes, a significant mutual interpenetration was measured. The variation of interpenetration thickness with separation distance, grafting density, and polymer size follows the same scaling law as the one observed for two opposing grafted neutral brushes in good solvent. However, compression between two opposing charged brushes results in less interpenetration relative to neutral brushes when considering equivalent grafting density and molecular weight. The friction coefficient between two opposing polymer-coated surfaces sliding past each other is shown to be directly correlated with the interpenetration thickness and more specifically to the number of polymer segments within the interpenetration layer.     

Modeling of protein interactions with surface-grafted charged polymers. Correlations between statistical molecular modeling and a mean field approach

Ion exchange media involving charge groups attached to flexible polymers are widely used for protein purification. Such media often provide enhanced target protein purity and yield. Yet, little is understood about protein interaction with such media at the molecular level, or how different media architectures might affect separation performance. To gain a better understanding of such adsorptive systems, statistical mechanical perturbation calculations, utilizing a Debye-Hückel potential, were performed on surface-grafted charged polymers and their interaction with model proteins. The studied systems were weakly charged, and the polymers were linear and relatively short (degree of polymerization is 30). Segment distributions from the surface were also determined. The interaction of spherical model protein particles of 12-30 A radius were investigated with respect to polymer grafting density, distance from matrix surface, protein charge, and ionic strength. The partitioning coefficient of the model proteins was determined for different distances from the surface. An empirical mean field theory that scales the entropy of the protein with the square of the protein radius correlates well to Monte Carlo statistical modeling results. Upon adsorption to the polymer layers, the model proteins exhibit a critical surface charge density that is proportional to the ionic strength, independent of the grafting density, and appears to be a fundamental determinant of protein adsorption. Partitioning of protein-like nanoparticles to the charged polymer surface is only favored above the particle critical charge density.     

Effect of organic solvent, electrolyte salt and a loading of cellulose tris (3,5-dichlorophenyl-carbamate) on silica gel on enantioseparation characteristics in capillary electrochromatography

The effect of the amount of the chiral selector, cellulose tris(3,5-dichlorophenylcarbamate) (CDCPC) on the separation characteristics of enantiomers of some charged and neutral analytes was studied in capillary electrochromatography (CEC). For better understanding of the effect of the loading of the chiral selector on the particles and pore size of the packing material, laser-beam particle size analyzer and scanning electron microscopy (SEM) were used. As shown in this study, CDCPC can be used for CEC enantioseparations of a wide range of chiral charged and neutral analytes with high efficiency. The loading of the polysaccharide derivative on the surface of silica materials even in high amounts does not markedly affect the particle size and porous structure of the packing material. The separation characteristics are strongly affected by the loading of CDCPC onto silica gel in both CEC and capillary liquid chromatography (CLC).     

Zwitterionic stationary phase with covalently bonded phosphorylcholine type polymer grafts and its applicability to separation of peptides in the hydrophilic interaction liquid chromatography mode

A novel phosphorylcholine type zwitterionic stationary phase was synthesized by graft polymerization of 2-methacryloyloxyethyl phosphorylcholine onto the surface of porous silica particles. The resulting material possesses both negatively charged phosphoric acid and positively charged quaternary ammonium groups, which renders it a low net charge over a wide pH range. The composition of the surface grafts were determined by elemental analysis and solid state NMR, and the surface charge (zeta-potential) in different buffer solutions were measured using photon correlation spectroscopy. Separation of several peptides was investigated on packed columns in the hydrophilic interaction liquid chromatography (HILIC) separation mode. It was shown that small peptides can be separated based on hydrophilic interaction and ionic interaction between the stationary phase and analyte. The organic solvent composition, the pH and the salt concentration of the eluent have strong effects on the retention time. Compared to native silica before grafting, the newly synthesized zwitterionic material gave more stable retention times for basic peptides over pH range 3-7 due to elimination of the dissociation of silanol groups.     

Synergistic effects of polymers and surfactants on depletion forces

This work investigates the synergistic effects of a neutral polymer and an anionic surfactant on depletion forces as a function of bulk polymer and bulk surfactant concentration. In this work, we measure the force between a silica particle and a silica plate in aqueous solutions of the polymer and the surfactant using atomic force microscopy. The polymer is the triblock copolymer poly(ethylene oxide-block-propylene oxide-block-ethylene oxide) (Pluronic F108), and the surfactant is sodium dodecyl sulfate (SDS). In F108-only solutions, the force between the silica particle and the silica plate is primarily repulsive for polymer concentrations ranging from 200 to 10 000 ppm. In SDS-only solutions, the net force between the silica surfaces is repulsive at all separations for concentrations below 16 mM SDS and is attractive with a structural force character above 16 mM SDS. When both F108 and SDS are present in the solution, a net attractive force is observed at SDS concentrations as low as 4 mM, a factor of 2 below the critical micelle concentration (cmc). We attribute this synergistic effect to the complexation of F108 with SDS in bulk solution at a critical aggregation concentration (cac) that is less than the cmc, producing a relatively large, charged complex that creates a significant depletion force between the particle and plate.     

Controlled association in suspensions of charged nanoparticles with a weak polyelectrolyte

The properties of high-pH suspensions of mixtures of silica with low-molecular-weight samples of the water-soluble polymer polyethylenimine (PEI) have been studied. At pH > 10 and low ionic strength, silica nanoparticles are stabilized by a negative surface charge, and PEI has only a very low positive charge. The adsorption of PEI induces a localized positive charge on the segments of polymer closest to the silica surface. The parts of the molecule furthest away from the surface have little charge because of the high pH of the medium. The polymer-covered particle remains negatively charged, imparting some electrostatic stabilization. Suspensions of silica and low-molecular-weight PEI are low-viscosity fluids immediately after mixing, but aggregation occurs leading to the eventual gelation (or sedimentation at lower concentrations) of these mixtures, indicating colloidal instability. The gelation time passes through a minimum with increasing surface coverage. The rate of gelation increases exponentially with molecular weight: for molecular weight > or = 10,000 Da PEI, the instability is so severe that uniform suspensions cannot be produced using simple mixing techniques. The gelation rates increase rapidly with temperature, ionic strength, and reduction in pH. The rate of gelation increases with increasing particle concentration at low surface coverage but decreases at high coverage as a consequence of a small increase in pH. Gels are broken by application of high shear into aggregates that re-gel more rapidly than the original discrete coated particles.     

Fullerene black: Structure, properties and possible applications

This review concerns the fullerene black, a poorly known nano-sized carbon material, the insoluble residue after extraction of fullerenes from fullerene soot obtained by arc vaporization of carbon material (usually graphite) in a helium atmosphere. This by-product of the production of fullerenes, whose yield reaches 80 wt %, is a finely dispersed material with a particle size of 40–50 nm. It includes amorphous carbon, graphitized particles, and graphite. Test reactions showed the presence in the structure of fullerene black of curved surfaces, and, like fullerenes, of alternating nonconjugated ordinary and double bonds. In addition to the double bonds, its structure includes dangling bonds in the concentration not higher than one per 1200 carbon atoms. Fullerene black absorbs oxygen from the atmosphere and water, and enters into the reactions of nucleophilic addition. The fullerene black cannot be graphitized, and its application is extremely important. The fullerene black was shown to activate hydrogen and thus to undergo a hydrogenolysis in the absence of a catalyst and to catalyze the dehydrogenation and dehydrocyclization of alkanes. This carbon nanomaterial can be used as a sorbent and a catalyst carrier, a tribotechnical additive; it can interact with carbide-forming metals and harden their surface.     

Separation of C60 and C70 fullerenes on silica modified by polyaromatic and π-acid aromatic compounds

Separation of C₆₀ and C₇₀ fullerenes by HPLC was studied using sorbents synthesized by reaction of perylenedicarboxylic anhydride, dimethoxyviolanthrene, the tetramer of chromotropic acid with formaldehyde (TCA), trinitrobenzoyl chloride, or chlorotrinitrobenzene with γ-aminopropyl silica. These sorbents possess satisfactory chromatographic properties. The sorbent based on TCA is effective for separation of preparative amounts of fullerenes. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1544–1546, August, 1997.     

Probing the spatial requirements for [60]fullerene-[60]fullerene π-stacking and the syn addition of [60]fullerenes across acenes

The reaction between 2 equiv of [60]fullerene and 6,8,15,17-tetraphenylheptacene-7,16-quinone leads to both cis and trans-bis[60]fullerene adducts. This result contrasts sharply with the highly diastereoselective syn additions of [60]fullerenes across 6,13-diphenylpentacene and 6,8,15,17-tetraphenylheptacene. The importance of spatially dependent [60]fullerene-[60]fullerene π-stacking interactions in promoting a syn addition of [60]fullerenes is discussed.     

Electronic and Chemical Characterization of Aluminum–Nitrogen (AlN) Substituted Fullerenes: C58AlN to C24Al12N12

Density functional theory calculations (B3LYP/6-311G*) are applied to devise a series of AlN-substituted C₆₀ fullerenes, avoiding weak homonuclear Al–Al and N–N bonds. The substitutional structures, energy gaps between the highest occupied molecular orbital and the lowest unoccupied molecular orbital, ionization potentials, binding energies, as well as dipole moments have been systematically investigated. The band gap (HOMO–LUMO gap) is larger for all the AlN-substituted fullerenes than C₆₀. The properties of heterofullerenes, especially, the HOMO–LUMO strongly depend on the number of AlN units. Natural charge analyses indicate that doping of fullerene with AlN units exerts electronic environment diversity to the cage. High charge transfer on the surfaces of our heterofullerenes provokes more studies on their possible application for hydrogen storage.