微波消解-微波等离子体炬原子发射光谱法测定膨化食品中铅和铝

膨化食品样品经微波消解处理,用微波等离子体炬原子发射光谱法(MPT-AES)测定其中铅和铝的含量。详细考察了分析谱线、微波功率、载气流量、工作气流量等实验参数对元素测定的影响,在最佳条件下测得铅和铝的检出限分别为4.7ng/mL和20.8ng/mL,其线性范围分别为0.01~20μg/mL和0.5~300μg/mL,样品加标回收率为96.4%~104.1%,精密度为1.06%~4.65%。结果表明,MPT-AES测定膨化食品中铅和铝的含量方法简便、高效、消耗试剂少、污染少、准确度高。     

微波消解-微波等离子体炬原子发射光谱测定啤酒中的铜、锌、铁、锰、硒、锶

建立了微波消解-微波等离子体炬原子发射光谱(MPT-AES)法测定啤酒中微量元素。考察了微波前向功率、工作气流量、载气流量等参数,确定了MPT-AES法测定各元素的最佳实验条件。在该条件下铜、锌、铁、锰、硒、锶的检出限分别为7ng.mL-1、46ng.mL-1、13ng.mL-1、8ng.mL-1、1.2ng.mL-1、5.6ng.mL-1。相对标准偏差(RSD)均在0.9%～4.8%之间,线性范围分别为0.1～100μg.mL-1、0.5～100μg.mL-1、0.5～100μg.mL-1、0.1～100μg.mL-1、0.01～10μg.mL-1、0.05～100μg.mL-1,加标回收率均在96%～110%之间。     

微波消解-微波等离子体炬原子发射光谱法测定合金钢中的铜、锰、钼

用微波等离子体炬 (MPT)为激发光源 ,氩气为等离子体工作气体 ,用气动雾化进样 ,研究了微波消解 微波等离子体炬原子发射光谱法 (MPT AES)测定合金钢中铜、锰、钼的方法。考察了微波功率、载气流量、工作气流量、氧屏蔽气流量等实验参数对测定铜、锰、钼的影响。对微波消解合金钢样品的消解条件进行了考察 ,建立了最佳消解程序。测定铜、锰、钼的检出限分别为 3.3、3.7和 42ng mL ,RSD(n =6)分别为 1 7%、2 .4%、3.8% ,并且测得它们的线性范围分别为0 .0 2～ 5 0 μg mL、0 .0 4～ 5 0 μg mL和 0 .2 0～ 5 0 μg mL。     

微波消解-微波等离子体炬原子发射光谱法测定原油和渣油中的铁、镍、铜和钠

采用微波消解技术消解原油和渣油,利用微波等离子体炬原子发射光谱法测定原油和渣油中的Fe、Ni、Cu、Na。考察了原油和渣油的最佳消解条件、各元素测定条件及共存元素对测定的影响。方法对Fe、Ni、Cu和Na元素的检出限分别为22、42、2．0和1．0μg/L;线性范围分别为0．1-100、0．15-50、0．01-5．0和0．006-2．0mg／L,应用该方法测定实际样品中Fe、Ni、Cu和Na的相对标准偏差分别为3．9％、3．6％、5．5％和3．4％。微波消解样品的测定结果与常规干法灰化法的测定结果相吻合。本方法省时、省酸、简便、快速,没有环境污染,具有一定的实际应用价值。     

MPT-AES法同时测定航空润滑油中铁、银和镍

用微波等离子体炬原子发射光谱法(MPT-AES)同时测定未使用过的航空润滑油中铁、银和镍的方法。详细考察了微波功率、载气流量、工作气流量、氧屏蔽气压力等实验参数对铁、银和镍发射强度的影响,并进行了系统优化。测得铁、银和镍的检出限分别为21.94ng/mL0、.36ng/mL9、.82ng/mL,线性范围分别为0.1~100μg/mL、0.001~8μg/mL、0.05~8μg/mL,各元素测定结果的相对标准偏差均小于3.95%,回收率在93.1%~107.4%之间。     

微波消解-火焰原子吸收光谱法测定玉米面中的铜、锌和铁

实验采用微波消解系统消解玉米面样品,将样品置于密闭容器内,加入一定量的硝酸和过氧化氢,放在微波炉内进行消解。详细考察了微波消解溶剂、消解时间、消解功率和消解压力对消解效果的影响,采用正交实验设计确定了微波消解的最佳工作参数。用火焰原子吸收光谱法测定玉米面中铜、锌和铁的含量,其相对标准偏差分别为1．99％、0．92％和2．10％（n=6）,平均加标回收率分别为97．5％、102．9％和98．7％。与常压消解法的测定结果进行比较,测定值吻合,准确度和精密度均优于传统方法。     

微波消解-氢化物发生原子荧光光谱法同时测定化肥中砷、汞含量

采用微波消解样品前处理手段以及双道原子荧光光度计,建立了微波消解一氢化物发生原子荧光光谱法同时测定化肥中砷、汞含量的方法。通过试验确定了样品前处理方法,对负高压、灯电流,载气、屏蔽气、原子化器高度、酸度等测试条件进行了优化。在优化的工作条件下,砷、汞含量分别在0-50ng／mL和0—1．0ng／mL范围内与荧光强度呈良好的线性关系,线性相关系数分别为0．9996,0．9996,检出限分别为0．085,0．008ng／mL,回收率分别为88．8％～107．4％,90．0％～120％,测定结果的相对标准偏差均小于7％（n=6）。     

微波消解-氢化物发生原子荧光光谱法测定头发样品中的微量汞

对微波消解-氢化物发生原子荧光光谱法测定头发样品中微量汞的方法进行了研究。采用HNO3和H2O2作消解剂,在最佳微波消解条件和测定条件下,线性回归线方程为Y=259．7c 155.4,相关系数r=0.9996,检出限为0．01ng／mL,线性范围为0-20ng／mL。测定结果的相对标准偏差为0,4％～2．8％,回收率为94,0％-102．0％。     

微波消解MPT-AES测定催化剂中的铈

研究了微波等离子体炬原子发射光谱法(MPT-AES)测定催化剂中稀土元素铈的方法。详细考察了测定铈时的实验参数，进行了系统优化。催化剂处理采用了微波消解技术。方法的检出限为2．56μg／mL，相对标准偏差(n=11)为4．37％，线性范围为20～250μg／mL，回收率在90％～ll0％之间。实验结果表明微波消解和MPT-AES联用可成为测定催化剂中铈含量的简单、快速、准确的分析方法。     

微波辅助萃取气相色谱-质谱联用测定蔬菜中的扑草净

研究了微波辅助萃取气相色谱．质谱联用测定植物样品中扑草净的方法，比较了几种不同溶剂的微波萃取效率，从而选取二氯甲烷为萃取溶剂，并采用三因素三水平的正交设计试验对溶剂体积、微波辐射时间、微波功率进行了优化。在优化的实验条件下分析了合成菠菜样品，对0．2μg/g和0．02μg/g的合成菠菜样品，回收率分别为99．5％和92．5％，相对标准偏差分别为5．0％和ll％，方法的线性范围为1．0—400ng／g，检出限为0．22ng／g。方法适合于分析植物样品中的扑草净。     

Microwave plasma torch analytical atomic spectrometry

The microwave plasma torch (MPT), as a relative new source, has found extensive use in atomic spectrometry. In this review, the fundamental features and characteristics of the MPT are summarized and compared with other kinds of analytical atomic sources, such as the more popularly used inductively coupled plasma (ICP), the direct current plasma (DCP), as well as other kinds of microwave plasmas (MWPs). Since the MPT offers some attractive features, it has been used as an excitation source for atomic emission spectrometry (MPT-AES), including the atomic emission detection (AED) for gas chromatography (GC), liquid chromatography (LC) and supercritical fluid chromatography (SFC). Also, it has been used either as an ionization source for atomic mass spectrometry (MPT-AMS) or an atomization source for atomic fluorescence spectrometry (MPT-AFS). The historical development and recent improvements in these MPT atomic spectrometric techniques are evaluated with emphasis on the analytical advantages and limitations. In addition, the future research directions and the application prospects of MPT atomic spectrometry (MPT-AS) are discussed.     

Microwave Flow Chemistry as a Methodology in Organic Syntheses,Enzymatic Reactions,and Nanoparticle Syntheses

Several studies have used microwaves as a heat source for carrying out various types of reactions employing circulation reaction vessels. The microwave flow chemical synthesis methodology is most appropriate in the use of microwaves in chemical syntheses. It can attenuate the problem of microwave heating (non‐uniform heating and penetration depth) and maximize the benefits (rapid heating and first temperature adjustments). In this brief review, we examine and explain some of the relevant features of microwave heating with applicative examples of the usage of microwave flow chemistry equipment in carrying out organic syntheses, enzymatic reactions, and (not least) nanoparticle syntheses.     

Microwave mediated hydrogen deuterium exchange: a rapid synthesis of H-substituted benzimidazole

Deuterium aromatic substituted compounds were prepared by microwave irradiation of the parent unlabeled compounds in the presence of deuterium oxide and deuterium chloride. The percentage of deuterium incorporation was investigated under various reaction conditions. A rapid synthesis of ²H-substituted benzimidazole under microwave irradiation is described.     

Microwave-assisted one-pot synthesis of 2,3-disubstituted 3H-quinazolin-4-ones

A practical synthesis of 2,3-disubstituted 3H-quinazolin-4-ones 1 with broad chemistry scope is described. The key step is the microwave promoted one-pot, two-step reaction sequence combining anthranilic acids, carboxylic acids, and amines providing efficient access to this important class of heterocycles.     

微波辅助提取（MAE）研究进展

在过去的十几年来,微波能已广泛应用于食品加工、农业,林业,轻工业,医疗卫生,橡胶和塑料的固化,陶瓷烧结,提取冶金,有机合成,生物样品水解,微波辅助提取等领域。特别是微波辅助提取技术近年来发展较快,引起化学工作者的极大兴趣。本文初步探讨了微波加热的机理,特点及近十年来微波辅助提取研究和应用的进展,并展望了微波辅助提取的发展前景。     

调控微波等离子体能量进行药片活性分子结构的质谱分析

采用微波等离子体质谱(MPT-MS)技术,对替硝唑和马来酸氯苯那敏药片进行快速质谱分析.通过调控等离子体能量,在一级谱图中可得到目标物的准分子离子及丰富的碎片离子,这些碎片离子与其对应串联质谱数据基本一致,甚至更加丰富;结合标准品比对分析,最终确定这些碎片离子来自目标物而非基质.因此,MPT兼具硬电离和软电离性质,采用MPT-MS技术从一级质谱图中获得的数据可对药片中活性分子的结构进行鉴定.该方法具有快速、准确及环保等特点,在发展MPT与简单的质量分析器联用,实现质谱仪的小型化等方面有广阔的应用前景.     

微波在分析化学及有机合成中的应用

综述了近10年来微波技术在分析化学和有机合成中的应用，着重介绍了微波消解在分析化学和微波辐射在有机合成反应中的应用进展。     

Microwave Heating Outperforms Conventional Heating for a Thermal Reaction that Produces a Thermally Labile Product: Observations Consistent with Selective Microwave Heating

Microwave (MW) heating is more effective than conventional (CONV) heating for promoting a high‐temperature oxidative cycloisomerization reaction that was previously reported as a key step in a total synthesis of the natural product illudinine. The thermal reaction pathway as envisioned is an inverse electron‐demand dehydro‐Diels–Alder reaction with in situ oxidation to generate a substituted isoquinoline, which itself is unstable to the reaction conditions. Observed reaction yields were higher at a measured bulk temperature of 200 °C than at 180 °C or 220 °C; at 24 hours than at earlier or later time points; and when the reaction solution was heated using MW energy as opposed to CONV heating with a metal heat block. Selective MW heating of polar solute aggregates is postulated to explain these observations.     

Microwave-Promoted Rapid Synthesis of 1-Aryl-1,2,3-Triazoles

1, 2, 4- and 1, 2, 3-triazole derivatives have found wide applications as plant growth regulators1, bactericides and medical fungicides2, insecticides3 and in dyeing and color development4.One of the general routes of synthesis of 1-aryl-1, 2, 3-triazoles was to treat aryl azides with a-keto phosphorus ylides in dry refluxing benzene for 0.5 to 2 days5. Herein we report, for the first time, a very quick and simple, microwave-promoted synthesis of 1-aryl-1, 2, 3-triazoles 3 from aryl azides 1 an…