不饱和类锗烯H2C=GeLiCl的DFT研究

采用密度泛函理论方法, 在B3LYP/6-311G(d, p)水平上研究了不饱和类锗烯H2C=GeLiCl的结构及异构化反应. 结果表明, 不饱和类锗烯H2C=GeLiCl有三种平衡构型, 其中非平面的p-配合物型构型能量最低, 是其存在的主要构型. 对平衡构型间异构化反应的过渡态进行了计算,求得了转化势垒. 计算预言了最稳定构型的振动频率和红外吸收强度.     

不饱和类锗烯H2C=GeLiCl的DFT研究

采用密度泛函理论方法,在B3LYP/6-311G(d.p)水平上研究了不饱和类锗烯H_2C=GeLiCl的结构及异构化反应.结果表明,不饱和类锗烯H_2C=GeLiCl有三种平衡构型,其中非平面的p-配合物型构型能量最低,是其存在的主要构型.对平衡构型间异构化反应的过渡态进行了计算,求得了转化势垒.计算预言了最稳定构型的振动频率和红外吸收强度.     

不饱和类锗烯H2C=GeNaBr的密度泛函理论研究

应用密度泛函理论DFT方法,在B3LYP/6-311G(d,p)水平上研究了不饱和类锗烯H2C=GeNaBr的结构及异构化反应.结果表明,不饱和类锗烯H2C=GeNaBr有3种平衡构型,其中非平面的p-配合物型构型能量最低,是其存在的主要构型.并对平衡构型间异构化反应的过渡态进行了计算,求得了转化势垒,预言了最稳定构型的振动频率和红外强度.     

不饱和类硅烯H_2CSiNaCl的密度泛函理论研究

采用密度泛函理论方法,在B3LYP/6-311G(d,p)水平上研究了不饱和类硅烯H2CSiNaCl的结构.结果表明,不饱和类硅烯H2CSiNaCl共有4种平衡构型,其中非平面的p-配合物型构型能量最低,是不饱和类硅烯H2CSiNaCl存在的主要构型.对平衡构型间异构化反应的过渡态进行了计算,求得了转化势垒.计算预言了最稳定构型的振动频率和红外强度.     

不饱和类碳烯H2C(=)CLiBr的DFT研究

采用量子化学计算方法，在B3LYP／6－311G^*水平上全优化得到了不饱和类碳烯H2C＝CLiBr的平衡结构，结果表明，不饱和类碳烯H2C＝CLiBr只有两种平衡结构，对这两种平衡结构之间相互转化的过渡态进行计算，求得了转化势垒，根据计算得到的微观性质，采用统计热力学方法，研究了两种平衡结构之间相互转化的热力学性质，进而讨论了两种平衡结构在不同温度下的稳定性问题，在计算得到振动频率及强度的基础上，模拟了稳定平衡结构的红外光谱图。     

不饱和类硅烯H2C＝SiMBr (M＝Li, Na)的DFT研究

采用密度泛函理论方法, 在B3LYP/6-311G (d,p)水平上研究了不饱和类硅烯H₂C＝SiMBr (M＝Li, Na)的结构. 结果表明, 不饱和类硅烯H₂C＝SiLiBr与H₂C＝SiNaBr各有三种平衡构型, 其中非平面的p-配合物型构型能量最低, 是这两种不饱和类硅烯存在的主要构型. 对平衡构型间异构化反应的过渡态进行了计算, 求得了转化势垒. 计算预言了最稳定构型的振动频率和红外强度.     

不饱和类硅烯H2C=SiNaCl的密度泛函理论研究

采用密度泛函理论方法,在B3LYP/6-311G(d,p)水平上研究了不饱和类硅烯H2C=SiNaCl的结构.结果表明,不饱和类硅烯H2C=SiNaCl共有4种平衡构型,其中非平面的p-配合物型构型能量最低,是不饱和类硅烯H2C=SiNaCl存在的主要构型.对平衡构型间异构化反应的过渡态进行了计算,求得了转化势垒.计算预言了最稳定构型的振动频率和红外强度.     

不饱和类碳烯H2C=CLiCI的构型及异构化的理论研

采用量子化学中的DFT理论方法，在B3LYP/6-311G*水平上全优化得到了不饱和类碳烯H2C=CLiCl的平衡结构。结果表明，不饱和类碳烯H2C=CLiCl只有2种平衡结构。对这2种平衡结构之间相互转化的过渡态进行计算，同时，采用统计热力学及过渡态理论，研究了2种平衡结构之间相互转化的热力学及动力学性质，进而讨论了2种平衡结构在不同温度下的稳定性问题，结果表明在所研究的100-600K温度范围内，只有一种平衡结构能够存在，在计算得到振动频率及吸收强度的基础上，模拟了稳定平衡结构的红外光谱图。     

不饱和类锗烯H_2CGeNaBr的密度泛函理论研究

应用密度泛函理论DFT方法,在B3LYP/6-311G(d,p)水平上研究了不饱和类锗烯H2CGeNaBr的结构及异构化反应.结果表明,不饱和类锗烯H2CGeNaBr有3种平衡构型,其中非平面的p-配合物型构型能量最低,是其存在的主要构型.并对平衡构型间异构化反应的过渡态进行了计算,求得了转化势垒,预言了最稳定构型的振动频率和红外强度.     

类硅烯H2C=SiLiBr与RH(R=F,OH,NH2)的插入反应

采用DFT B3LYP和QCISD方法研究了类硅烯H2C＝SiLiBr与RH (R＝F, OH, NH2)的插入反应. 在B3LYP/6- 311＋G(d,p)水平上优化了反应势能面上的驻点构型. 结果表明, H2C＝SiLiBr与HF, H2O或NH3发生插入反应的机理相同. QCISD/6-311＋＋G(d,p)//B3LYP/6-311＋G(d,p)计算的三个反应的势垒分别为148.62, 164.42和165.07 kJ•mol－1, 反应热分别为－69.63, －43.02和－28.27 kJ•mol－1. 相同条件下发生插入反应时, 反应活性都是H—F＞H—OH＞H—NH2.     

钠氟类硅烯插入RH键(R=F,OH,NH2,CH3)反应的理论研究

用密度泛函方法研究了钠氟类硅烯插入R_H键(R=F,OH,NH2,CH3)的反应机理.4个反应的机制类似,反应经历了类硅烯的亲电接近、亲核插入和取代三个阶段之后,形成中间络合物,4个反应的势垒分别为0.9,61.7,114.6和190.6kJ/mol(经零点能校正).中间络合物可以解离为取代硅烷和NaF,这是一个无过渡态的过程.反应能分别是-122.6,-96.3,-6.8和50.2kJ/mol.     

Probing the imine silylenoid HN=SiNaF and its insertions reaction with R–H (R=F,OH, NH<Subscript>2</Subscript>, CH<Subscript>3</Subscript>) using DFT

The geometries and isomerization of the imine silylenoid HN=SiNaF as well as its insertion reactions with some R–H molecules have been systematically investigated theoretically, where R=F, OH, NH₂, and CH₃, respectively. The barrier heights for the four insertion reactions are 67.7, 115.6, 153.5, and 271.5 kJ/mol at the B3LYP/6-311+G* level of theory, respectively. Here, all the mechanisms of the four reactions are identical to each other, i.e., a stable intermediate has been formed during the insertion reaction. Then, the intermediate could dissociate into the substituted silylene (HN=SiHR) and NaF with a barrier corresponding to their respective dissociation energies. Correspondingly, the reaction energies for the four reactions are 71.8, 95.5, 123.3, and 207.6 kJ/mol, respectively, which are linearly correlated with the calculated barrier heights. Furthermore, the effects of halogen substitutions (F, Cl, and Br) on the reaction activity have also been discussed. As a result, the relative reactivity among the four insertion reactions should be as follows: H–F > H–OH > H–NH₂ > H–CH₃.     

Mechanism of Insertion Reactions between Silylenoid H2SiLiF and GeH3R (R =F,OH, NH2): a Theoretical Study

Theoretical investigations on the insertion reaction mechanisms of three- membered-ring silylenoid H2 Si Li F with GeH 3R(R = F, OH, NH2) have been systematically carried out by combined density functional theory(DFT) and ab initio quantum chemical calculations. The geometries of all stationary points for these reactions were optimized using the B3 LYP method and then the QCISD method was used to calculate the single-point energies. The calculated results indicate that, there are one precursor complex(Q), one transition state(TS), and one intermediate(IM) which connect the reactants and the products along the potential energy surface. The insertion reactions of three-membered-ring silylenoid with Ge H3 R proceed in a concerted manner, forming H2RSi-Ge H3 and Li F. The calculated potential energy barriers of the three reactions are 29.17, 30.90, and 54.07 k J/mol, and the reaction energies for the three reactions are –127.05, –116.91, and –103.31 k J/mol, respectively. The insertion reactions in solvents are similar to those in vacuum. Under the same situation, the insertion reactions should occur easily in the following order: GeH 3-F GeH 3-OH GeH 3-NH2. The elucidations of the mechanism of these insertion reactions provided a new mode of silicon-germanium bond formation.     

Equilibrium Structures and Isomerization Reactions of the Unsaturated Germylenoid H2C=GeLiF

The unsaturated germylenoid H2C=GeLiF has been studied by using DFT method at the B3LYP/6-311+G (d, p) level. Geometry optimization calculations indicate that H2C=GeLiF has three equilibrium configurations, in which the p-complex is the lowest in energy and the most stable structure. Two transition states for isomerization reactions of H2C=GeLiF are located and the energy barriers are calculated. For the most stable one, vibrational frequencies and infrared intensities have been predicted.     

Equilibrium Structures and Isomerization Reactions of the Unsaturated Carbenoid H2Ge=CLiF

The novel carbenoid H2Ge=CLiF was studied by using the DFT B3LYP and QCISD methods. Geometry optimization calculations indicate that H2Ge=CLiF has three equilibrium configurations, in which the three-membered structure is the lowest in energy and thus the most stable. Two transition states for isomerization reactions of H2Ge=CLiF were located and the energy barriers were calculated. For the most stable one, the vibrational frequencies and infrared intensities were predicted.