Effect of attractions on the structure of polymer solutions confined between surfaces: a density functional approach

A density functional theory is presented to study the effect of attractions on the structure of polymer solutions confined between surfaces. The polymer molecules have been modeled as a pearl necklace of freely jointed hard spheres and the solvent as hard spheres, both having Yukawa-type attractions and the mixture being confined between attractive Yukawa-type surfaces. The present theory treats the ideal gas free energy functional exactly and uses weighted density approximation for the hard chain and hard sphere contributions to the excess free energy functional. The attractive interactions are calculated using the direct correlation function obtained from the polymer reference interaction site model theory along with the mean spherical approximation closure. The theoretical predictions on the density profiles of the polymer and the solvent molecules are found to agree quite well with the Monte Carlo simulation results for varying densities, chain lengths, wall separations, and different sets of interaction potentials.     

Effect of attractive interactions on the structure of polymer melts confined between surfaces: a density-functional approach

A density-functional theory is presented to study the structure of polymers, having attractive interactions, confined between attractive surfaces. The theory treats the ideal-gas free-energy functional exactly and uses weighted density approximation for the hard-chain contribution to the excess free-energy functional. The bulk interactions of freely jointed hard spheres are obtained from generalized Flory equation of state and the attractive interactions are calculated using the direct correlation function obtained from the polymer reference interaction site model theory along with the mean spherical approximation closure. The theoretical predictions are found to be in quite good agreement with the Monte Carlo simulation results for varying densities, chain lengths, and different interaction potentials. The results confirm important implications of using different approximations for the hard-sphere and attractive interactions.     

Structure of short polymers at interfaces: a combined simulation and theoretical study

The structure of polymers confined between surfaces is studied using computer simulation and a density functional approach. The simple model system considers the polymer molecule as a pearl necklace of freely jointed hard spheres, having attractions among the beads, confined between attractive surfaces. This approach uses the universality of the free-energy functional to obtain the self-consistent field required in the single chain simulation. The second-order direct correlation function for the uniform bulk fluid required as input has been calculated from the reference interaction site model integral equation theory using mean spherical approximation. The theoretical results are shown to compare well with the Monte Carlo simulation results for varying densities, chain lengths, and with different attractive interaction parameters. The simulation results on the conformational properties give important indications regarding the behavior of chains as they approach the surfaces.     

A solvation‐free‐energy functional: A reference‐modified density functional formulation

The three‐dimensional reference interaction site model (3D‐RISM) theory, which is one of the most applicable integral equation theories for molecular liquids, overestimates the absolute values of solvation‐free‐energy (SFE) for large solute molecules in water. To improve the free‐energy density functional for the SFE of solute molecules, we propose a reference‐modified density functional theory (RMDFT) that is a general theoretical approach to construct the free‐energy density functional systematically. In the RMDFT formulation, hard‐sphere (HS) fluids are introduced as the reference system instead of an ideal polyatomic molecular gas, which has been regarded as the appropriate reference system of the interaction‐site‐model density functional theory for polyatomic molecular fluids. We show that using RMDFT with a reference HS system can significantly improve the absolute values of the SFE for a set of neutral amino acid side‐chain analogues as well as for 504 small organic molecules. © 2015 Wiley Periodicals, Inc.     

Interactions between surfaces coated with solvophobic and solvophilic homopolymers

Using scaling theory, we investigate the interaction between two planar surfaces that are coated with both A and B homopolymers. The polymers are tethered by one end and grafted at relatively low densities. The B chains are chosen to be solvophobic, while the A polymers are solvophilic. Calculating the energy of interaction versus distance profile, we find that the curve shows a wide attractive region as the surfaces are compressed. The features of this profile can be tailored by varying the length and grafting densities of the different chains. Our results provide guidelines for controlling the interaction between polymer-coated colloidal particles.     

Hydrogen-bonded layer-by-layer films of block copolymer micelles with pH-responsive cores

The structure of grafted adsorbing polymers on surfaces is described as a statistical ensemble of loops generated by an one-dimensional random walk perpendicular to the surface. The configuration of each chain is considered as a succession of closed loops ended by an open loop (a tail). The probability of formation of each individual loop is the product between the probability of first return to the surface and a Boltzmann factor containing the free energy of the Flory-Huggins kind, which is approximated by the minimum free energy of all possible configurations of that loop. At high grafting densities, the attractive interactions between monomers and surface control the fraction of polymer belonging to either closed loops or tails, hence the formation of a stretched grafted brush. At low grafting densities, the increase of that interaction above a critical value generates an abrupt collapse of the brush on the surface. Whereas for long polymers (with more than about 100 Kuhn segments), the structure of the brush can be determined, in general, only via Monte-Carlo sampling, it is argued that the two structural transitions indicated above can be well predicted by simple approximations.     

Effect of surface grafted polymers on the adsorption of different model proteins

Adsorption of a model protein to a surface with end-grafted polymers was studied by Monte Carlo simulations. In the model the effect on protein adsorption in the presence of end-grafted polymers was evaluated by calculating the change in free energy between an end-grafted surface and a surface without polymers. The change in free energy was calculated using statistical mechanical perturbation theory. Apart from ordinary athermal polymer-polymer and protein-polymer interactions we also study a broad selection of systems by varying the interaction between proteins and polymers and effective polymer-solvent interactions. The interactions between the molecules span an interval from -0.5 to +0.5 kT. Consequently, general features of protein adsorption to end-grafted surfaces is investigated by systematically changing properties like hydrophilicity/hydrophobicity of the polymer, protein and surface as well as grafting density, degree of polymerization and protein size. Increasing grafting density as well as degree of polymerization decreases the adsorption of protein except in systems with attractive polymer-protein interactions, where adsorption increases with increasing chain length and higher grafting density. At a critical polymer-protein interaction neither chain length nor grafting density affects the free energy of adsorption. Hydrophilic polymers were found to prevent adsorption better than hydrophobic polymers. Very small particles with radii comparable to the size of a polymer segment were, however, better excluded from the surface when using hydrophobic than hydrophilic polymers. For systems with attractive polymer-protein interaction not only the volume of the protein was shown to be of importance but also the size of the exposed surface.     

Density-functional study of interfacial properties of colloid-polymer mixtures

Interfacial properties of colloid-polymer mixtures are examined within an effective one-component representation, where the polymer degrees of freedom are traced out, leaving a fluid of colloidal particles interacting via polymer-induced depletion forces. Restriction is made to zero-, one-, and two-body effective potentials, and a free energy functional is used that treats colloid excluded volume correlations within Rosenfeld's fundamental measure theory, and depletion-induced attraction within first-order perturbation theory. This functional allows a consistent treatment of both ideal and interacting polymers. The theory is applied to surface properties near a hard wall, to the depletion interaction between two walls, and to the fluid-fluid interface of demixed colloid-polymer mixtures. The results of the present theory compare well with predictions of a fully two-component representation of mixtures of colloids and ideal polymers (the Asakura-Oosawa model) and allow a systematic investigation of the effects of polymer-polymer interactions on interfacial properties. In particular, the wall surface tension is found to be significantly larger for interacting than for ideal polymers, whereas the opposite trend is predicted for the fluid-fluid interfacial tension.     

Confinement free energy of surfaces bearing end-grafted polymers in the mushroom regime and local measurement of the polymer density

End-tethered polymer chains usually adopt mushroomlike structures on the surface when their density is low. The behaviors of these surface-attached hemicoils are described by existing polymer theory. Dolan and Edwards derived the free energy of a single polymer chain confined between two planar surfaces. Their theory was used to approximate the steric interaction free energy, E, of two identical surfaces bearing polymers in the mushroom regime and to compare with experimental data obtained from surface force measurements. However, because of a mislabeled plot in the original paper, experimental force profiles did not seem to fit the free energy approximation satisfactorily. We have correctly relabeled the involved plot and derived a new simple expression for E. In order to verify this expression, we have performed experiments on PEG45 polymers incorporated in lipid bilayers using a surface force apparatus. The measured force profiles are in perfect agreement with the prediction. We show that such measurements can be used to determine the local density of grafted polymer with good precision.     

Polydisperse telechelic polymers at interfaces: analytic results and density functional theory

We use a recently developed continuum theory to expand on an exact treatment of the interfacial properties of telechelic polymers displaying Schulz-Flory polydispersity. Our results are remarkably compact and can be derived from the properties of equilibrium, ideal polymers at interfaces. A new surface adsorption transition is identified for ideal telechelic chains, wherein the central block is an equilibrium polymer. This transition occurs in the limit of strong end adsorption. Additionally, closed expressions are derived for the ideal continuum telechelic chain in contact with two large spheres, using the Derjaguin approximation. We analyze the interactions between colloids as a function of polydispersity and molecular weight, and the results are compared with polymer density functional theory in the dilute limit. Significant variations in polymer mediated forces are observed as a function of polydispersity, molecuar weight, and chain stiffness.     

End‐Anchored Polymers: Compression by Different Mechanisms and Interpenetration of Apposing Layers

Summary: This paper presents a systematic study of the compression of end‐anchored polymer layers by a variety of mechanisms. We treat layers in both good and Θ solvents, and in the range of polymer densities that is normally encountered in experiments. Our primary technique is numerical self‐consistent field (NSCF) theory. We compare the NSCF results for the different mechanisms with each other, and with those of the analytic SCF theory. For each mechanism, we calculate the density profiles, layer thicknesses, and free energies, all as functions of the degree of polymerization and surface coverage. The free energy and the deformation of each layer depend on the compression mechanism, and they can be very different from the ASCF theory. For example, the energy of compression can be as much as three times greater than the analytical SCF (ASCF) prediction, and it does not reduce to simple, universal functions of the reduced distance between the surfaces. The overall physical picture simplifies if the free energy is expressed in terms of the layer deformation, rather than the reduced surface separation. We also examine and quantify the interpenetration of layers, discuss why ASCF theory applies better to some compression mechanisms than others, and end with comments on the difficulties in extracting quantitative information from surface‐forces experiments.

Comparisons of forces of compression in a good solvent for the three different systems, as functions of D/n_b. The lower three curves are for σ* = 3, and the upper three are for σ* = 23.     

Simulating equilibrium surface forces in polymer solutions using a canonical grid method

A new simulation method for nonuniform polymer solutions between planar surfaces at full chemical equilibrium is described. The technique uses a grid of points in a two-dimensional thermodynamic space, labeled by surface area and surface separations. Free energy differences between these points are determined via Bennett's optimized rates method in the canonical ensemble. Subsequently, loci of constant chemical potential are determined within the grid via simple numerical interpolation. In this way, a series of free energy versus separation curves are determined for a number of different chemical potentials. The method is applied to the case of hard sphere polymers between attractive surfaces, and its veracity is confirmed via comparisons with established alternative simulation techniques, namely, the grand canonical ensemble and isotension ensemble methods. The former method is shown to fail when the degree of polymerization is too large. An interesting interplay between repulsive steric interactions and attractive bridging forces occurs as the surface attraction and bulk monomer density are varied. This behavior is further explored using polymer density functional theory, which is shown to be in good agreement with the simulations. Our results are also discussed in light of recent self-consistent field calculations which correct the original deGennes results for infinitely long polymers. In particular, we look at the role of chain ends by investigating the behavior of ring polymers.     

Free energy density functional for adsorption of fluids in nanopores

A classical free energy density functional, which is isomorphic to a usual effective hard sphere model + mean field approximation for tail contribution, is proposed for treatment of real fluids in inhomogeneous states. In the framework of the classical density functional theory (DFT), the present functional is applied to two representative model fluids, namely, a Lennard-Jones fluid and a hard core attractive Yukawa fluid, subject to influence of various external fields. A comprehensive comparison with simulation results and a detailed analysis show that the present functional holds simultaneously all of the desirable properties inherent in an excellent functional, such as high accuracy, computational simplicity, consistency with a hard wall sum rule, nonrecourse to use of adjustable parameter(s) and weighted densities, reproduction of bulk second-order direct correlation function (DCF) in bulk limit, and applicability to subcritical fluid phenomena.     

Surface forces between telechelic brushes revisited: the origin of a weak attraction

Telechelic polymers are useful for surface protection and stabilization of colloidal dispersions by the formation of polymer brushes. A number of theoretical investigations have been reported on a weak attraction between two telechelic brushes when they are at the classical contact, i.e., when the surface separation is approximately equal to the summation of the brush thicknesses. While recent experiments have confirmed the weak attraction between telechelic brushes, its origin remains elusive because of conflicting approximations used in the previous theoretical calculations. In this paper, we have investigated the telechelic polymer-mediated surface forces by using a polymer density functional theory (PDFT) that accounts for both the surface-adhesive energy and segment-level interactions specifically. Within a single theoretical framework, the PDFT is able to capture both the depletion-induced attraction in the presence of weakly adhesive polymers and the steric repulsion between compressed polymer brushes. In comparison of the solvation forces between telechelic brushes with those between brushes formed by surfactant-like polymers and with those between two asymmetric surfaces mediated by telechelic polymers, we conclude that the weak attraction between telechelic brushes is primarily caused by the bridging effect. Although both the surfactant-like and telechelic polymers exhibit a similar scaling behavior for the brush thickness, a significant difference has been observed in terms of the brush microstructures, in particular, the segment densities near the edges of the polymer brushes.     

Density functional theory of homopolymer mixtures confined in a slit

A density functional theory (DFT) is developed for polymer mixtures with shorted-ranged attractive interparticle interactions confined in a slit. Different weighting functions are used separately for the repulsive part and the attractive part of the excess free energy functional by applying the weighted density approximation. The predicted results by DFT are in good agreement with the corresponding simulation data indicating the reliability of the theory. Furthermore, the center-of-mass profiles and the end-to-end distance distributions are obtained by the single chain simulation; the predictions also agree well with simulation data. The results reveal that both the attraction of the slit wall and the temperature has stronger effect on longer chains than on shorter ones because the intrasegment correlation of chains increases with increasing chain length.     

Phase behavior of polymer/nanoparticle blends near a substrate

We use the recent fluids density functional theory of Tripathi and Chapman [Phys. Rev. Lett. 94, 087801 (2005); J. Chem. Phys. 122, 094506 (2005)] to investigate the phase behavior of athermal polymer/nanoparticle blends near a substrate. The blends are modeled as a mixture of hard spheres and freely jointed hard chains, near a hard wall. There is a first order phase transition present in these blends in which the nanoparticles expel the polymer from the surface to form a monolayer at a certain nanoparticle concentration. The nanoparticle transition density depends on the length of the polymer, the nanoparticle diameter, and the overall bulk density of the system. The phase transition is due to both packing entropy effects related to size asymmetry between the components and to the polymer configurational entropy, justifying the so-called "entropic push" observed in experiments. In addition, a layered state is found at higher densities which resembles that in colloidal crystals, in which the polymer and nanoparticles form alternating discrete layers. We show that this laminar state has nearly the same free energy as the homogeneously mixed fluid in the bulk and is nucleated by the surface.     

Simple model for grafted polymer brushes

The first theories of grafted polymer brushes assumed a step profile for the monomer density. Later, the real density profile was obtained from Monte Carlo or molecular dynamics simulations and calculated numerically using a self-consistent field theory. The analytical approximations of the solutions of the self-consistent field equations provided a parabolic dependence of the self-consistent field, which in turn led to a parabolic distribution for the monomer density in neutral brushes. As shown by numerical simulations, this model is not accurate for dense polymer brushes, with highly stretched polymers. In addition, the scaling laws obtained from the analytical approximations of the self-consistent field theory are identical to those derived from the earlier step-profile-approximation and predict a vanishing thickness of the brush at low graft densities, and a thickness exceeding the length of the polymer chains at high graft densities. Here a simple model is suggested to calculate the monomer density and the interaction between surfaces with grafted polymer brushes, based on an approximate calculation of the partition function of the polymer chains. The present model can be employed for both good and poor solvents, is compatible with a parabolic-like profile at moderate graft densities, and leads to an almost steplike density for highly stretched brushes. While the thickness of the brush depends strongly on solvent quality, it is a continuous function in the vicinity of the temperature. In good and moderately poor solvents, the interactions between surfaces with grafted polymer brushes are always repulsive, whereas in poor solvents the interactions are repulsive at small separations and become attractive at intermediate separation distances, in agreement with experiment. At large separations, a very weak repulsion is predicted.     

Demixing in athermal mixtures of colloids and excluded-volume polymers from density functional theory

We study the structure and interfacial properties of model athermal mixtures of colloids and excluded volume polymers. The colloid particles are modeled as hard spheres whereas the polymer coils are modeled as chains formed from tangentially bonded hard spheres. Within the framework of the nonlocal density functional theory we study the influence of the chain length on the surface tension and the interfacial width. We find that the interfacial tension of the colloid-interacting polymer mixtures increases with the chain length and is significantly smaller than that of the ideal polymers. For certain parameters we find oscillations on the colloid-rich parts of the density profiles of both colloids and polymers with the oscillation period of the order of the colloid diameter. The interfacial width is few colloid diameters wide and also increases with the chain length. We find the interfacial width for the end segments to be larger than that for the middle segments and this effect is more pronounced for longer chains.     

Polymer depletion profiles around nonspherical colloidal particles

We study the effect of chain self-avoidance on the polymer density profiles that are induced by a single colloidal particle of nonspherical shape such as an ellipsoid, a dumbbell, or a lens in a solution of nonadsorbing polymers. For colloid sizes sigma much smaller than the size R(x) of the polymers, we observe a pronounced difference between ideal and self-avoiding chains. In the case of ideal polymers, the surfaces of constant density always have the same character as the surface of the particle, e.g., are oblate for an oblate ellipsoid. In the self-avoiding case, however, the character changes with increasing distance r from the particle, and an oblate particle induces prolate surfaces of constant density if sigma相似文献