Simultaneous voltammetric determination of Mo(VI) and W(VI) by adsorptive differential pulse stripping method using adaptive neuro-fuzzy inference system

An adsorptive differential pulse stripping method is proposed for the simultaneous determination of molybdenum and tungsten based on the formation of their complexes with a novel proton transfer compound, [phenH]⁺[pyzdc]^?, containing both pyrazine-2,3-dicarboxylic acid and 1,10-phenanthroline. The optimum experimental conditions were obtained using 0.052 mM [phenH]⁺[pyzdc]^? ligand, pH 3.3, accumulation potential of ?0.1 V versus Ag/AgCl, accumulation time of 60 s and scan rate of 33.3 mV/s. An adaptive neuro-fuzzy inference system (ANFIS) was utilized for the analysis of the voltammogram data. The detection limits were 4.0 ng/mL for Mo(VI) and 3.0 ng/mL for W(VI). The influence of potential interfering ions on the determination of molybdenum and tungsten was studied. The procedure was applied to the simultaneous determination of molybdenum and tungsten in some water samples.     

Simultaneous determination of copper, bismuth and lead by adsorptive stripping voltammetry in the presence of thymolphthalexone.

A novel, sensitive and selective adsorptive stripping procedure for simultaneous determination of copper, bismuth and lead is presented. The method is based on the adsorptive accumulation of thymolphthalexone (TPN) complexes of these elements onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. The influences of control variables on the sensitivity of the proposed method for the simultaneous determination of copper, lead and bismuth were studied using the Derringer desirability function. The optimum analytical conditions were found to be TPN concentration of 4.0 microM, pH of 9.0, and accumulation potential at -800 mV vs. Ag/AgCl with an accumulation time of 80 s. The peak currents are proportional to the concentration of copper, bismuth and lead over the 0.4-300, 1-200 and 1-100 ng mL(-1) ranges with detection limits of 0.4, 0.8 and 0.7 ng mL(-1), respectively. The procedure was applied to the simultaneous determination of copper, bismuth and lead in the tap water and some synthetic samples with satisfactory results.     

Determination of nifuroxazide with polarography and adsorptive stripping voltammetry at mercury and carbon paste electrodes

A simple method for the determination of the urinary tract antibiotic nifuroxazide has been developed. The electrochemical reduction of the nitro group at mercury and carbon paste electrodes can be used for the determination with and without adsorptive preconcentration. The influence of parameters like pH of the background electrolyte, preconcentration potential and preconcentration time on the sensitivity of the method has been studied. Modification of the carbon paste by addition of nonpolar polystyrene/divinylbenzene particles has been investigated to enhance the adsorption properties of the surface. Concentrations as low as 10 ng/mL could be determined in urine without interferences.     

Determination of nifuroxazide with polarography and adsorptive stripping voltammetry at mercury and carbon paste electrodes

A simple method for the determination of the urinary tract antibiotic nifuroxazide has been developed. The electrochemical reduction of the nitro group at mercury and carbon paste electrodes can be used for the determination with and without adsorptive preconcentration. The influence of parameters like pH of the background electrolyte, preconcentration potential and preconcentration time on the sensitivity of the method has been studied. Modification of the carbon paste by addition of nonpolar polystyrene/divinylbenzene particles has been investigated to enhance the adsorption properties of the surface. Concentrations as low as 10 ng/mL could be determined in urine without interferences. Received: 6 October 1997 / Revised: 22 January 1998 / Accepted: 26 January 1998     

Adsorptive-catalytic stripping voltammetry for determination of ultratrace titanium

An extremely sensitive stripping voltammetric procedure for determination of ultratrace titanium is reported. The method is based on the interfacial preconcentration of titanium-cupferron complex onto the hanging mercury drop electrode, followed by catalytic reduction of the adsorbed complex for the presence of cupferron. The peak currents are directly proportional to titanium in the ranges of 0.06-1.0 ng/ml and 1.0-30.0 ng/ml. Moreover, the character of stripping current has also been studied with various polarographic methods. Such coupling of catalytic and adsorptive collection processes holds great promise for the development of an ultrasensitive voltammetric procedure for other metals.     

Catalytic adsorptive stripping voltammetry determination of ultra trace amount of molybdenum using factorial design for optimization

A highly sensitive procedure is presented for the determination of ultra-trace concentration of molybdenum by catalytic adsorptive stripping voltammetry. The method is based on adsorptive accumulation of the molybdenum (Mo)-pyrocatechol violet (PCV) complex on to a hanging mercury drop electrode, followed by reduction of the adsorbed species by voltammetric scan using differential pulse modulation. The reduction current is enhanced catalytically by chlorate. The influence of variables was completely studied by factorial design analysis. Optimum analytical conditions for the determination of molybdenum were established. Molybdenum can be determined in the range 1.0 × 10⁻³-100.0 ng ml⁻¹ with a limit of detection of 0.2 pg ml⁻¹. The influence of potential interfering ions on the determination of molybdenum was studied. The procedure was applied to the determination of molybdenum in mineral water and some analytical grade substances with satisfactory results.     

Adsorptive stripping voltammetric determination of traces of molybdenum in natural water in the presence ofα-benzoinoxime

The electrochemical behavior of the molybdenum complex of -benzoinoxime was investigated using cyclic voltammetry and linear scan voltammetry, after adsorptive accumulation of the complex onto a hanging mercury drop electrode (HMDE). The signal corresponds to the reduction of molybdenum in the complex adsorbed at the HMDE surface. Under optimal conditions, the adsorptive stripping voltammetric procedure gave an extremely low detection limit of 0.1 nM (9.6ng/l) Mo(VI) following stirred accumulation for 5 min at 0.0 V (vs. Ag/AgCl). The reduction cur rent-[Mo(VI)] relationships were linear up to 25 and 100 nM. Repetitive determinations of 10 nM solutions gave relative standard deviations of 2.2 and 3.5%, for 1 and 5-min accumulation periods, respectively. Most of the ions investigated did not interfere with the determination of molybdenum, except for tungsten. Excellent selectivity against copper was observed. The proposed procedure was applied to the direct determination of molybdenum in natural water.     

Quantification of Sub‐Nanomolar Levels of Aluminum by Adsorptive Stripping Voltammetry Using Rubeanic Acid as a Selective Chelating Agent

A novel, sensitive and selective adsorptive stripping procedure for determination of aluminum is presented. The method is based on the adsorptive accumulation of dithiooxamide (Rubeanic acid) complex of aluminum onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. The influences of control variables on the sensitivity of the proposed method for the determination of aluminum were studied. The optimum analytical conditions were found to be Rubeanic acid (RA) concentration of 8.0×10^?5 M, ammonia buffer (NH₃? NH₄Cl) pH of 6.5, and accumulation potential at ?50 mV vs. Ag/AgCl with an accumulation time of 60 s. The peak currents are proportional to the concentration of aluminum over the 0.3–70 ng mL^?1 ranges with detection limit of 0.012 ng mL^?1. The procedure was applied to the determination of aluminum in the Lab. Water, HCl of Merck and potato samples with satisfactory results.     

Adsorptive stripping voltammetric determination of copper(II) ion using phenyl pyridyl ketoneoxime (PPKO)

A sensitive and selective procedure is presented for the voltammetric determination of copper(II) ion. The procedure involves an adsorptive accumulation of Cu2+-PPKO on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of reduction current of adsorbed complex at about -0.30 V (vs. SCE). The optimum conditions for the analysis of copper(II) ion include pH (5.8-7.0), 60 microgM PPKO and an accumulation potential of -0.5 V (vs. SCE). The peak current is proportional to the concentration of copper over the range 0.3-76 ng mL(-1) with a detection limit of 0.01ng mL(-1) with an accumulation time of 60 s. The speciation of different forms of complex between copper(II) ion and PPKO, using the Best (Martell program), followed pH measurement were examined. The method was applied to the determination of copper(II) ion content in real samples successfully.     

Kinetic-Spectrophotometric Determination of Tellurium (IV) by Its Catalytic Effect on the Reduction of Thionine by Sodium Sulfide in Cationic Micellar Medium

A simple and highly sensitive method is proposed for the determination of Te(IV) by its catalytic effect on the reduction of thionine by sodium sulfide in the presence of cetyl trimethyl ammonium bromide as a micelle media. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of thionine at 600 nm with a fixed time of 0.5-2.5 min from initiation of the reaction. Tellurium can be measured in the concentration range of 0.6-500.0 ng/mL, with a limit of detection of 0.3 ng/mL Te(IV). The influence of more than thirty potential interfering ions was studied on the determination of tellurium. The relative standard deviation for ten replicate measurements of 0.020 and 50.0 ng/mL Te(IV) was 2.1 and 1.9%, respectively. The method was applied for the determination of tellurium in synthetic samples.     

Determination of Trace Amounts of Copper by Adsorptive Stripping Voltammetry

ABSTRACT

A technique is presented for the determination of trace amounts of copper(II) by adsorptive cathodic stripping voltammetry. The procedure is based on adsorptive accumulation of copper(II)-Alizarin Red S (ARS) complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the reduction current of the adsorbed complex at -0.16 V (vs. Ag/AgCl). The height of the copper -ARS reduction peak is linearly dependent upon the copper(II) concentration between 0.2-15 and 15-500 ng.ml^?1. The detection limit of the technique is 0.05 ng.ml^?1 copper(II) for a collection time of 1 minute. The method is free from most interferences. The procedure has been successfully applied to the determination of trace amounts of copper(II) in some analytical grade salts.     

Trace amounts determination of lead,zinc and copper by adsorptive stripping voltammetry in the presence of dopamine

A selective and sensitive method for simultaneous determination of lead, zinc and copper by adsorptive differential pulse cathodic stripping voltammetry is presented. The method is based on adsorptive accumulation of the complexes of Pb(II), Zn(II), and Cu(II) ions with dopamine onto hanging mercury drop electrode (HMDE), followed by reduction of adsorbed species by differential pulse cathodic stripping voltammetry. The effect of experimental parameters such as pH, dopamine concentration, accumulation time and potential and scan rate were examined. Under the optimized conditions, linear calibration curves were established for the concentration of Pb, Zn, and Cu in the ranges of 5–150, 5–250, and 1–150 ng/mL, respectively. Detection limits of 0.06, 0.25, and 0.04 ng/mL for Pb, Zn, and Cu were obtained. An application of the proposed method is reported for the determination of these elements in some real samples such as natural waters and alloys.     

Simultaneous Determination of Iron,Copper, and Cadmium by Adsorptive Stripping Voltammetry in the Presence of Thymolphthalexone

A novel, sensitive and selective adsorptive stripping procedure for simultaneous determination of iron, copper and cadmium is presented. The method is based on the adsorptive accumulation of thymolphthalexone (TPN) complexes of these elements onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. The influences of control variables on the sensitivity of the proposed method for the simultaneous determination of iron, copper and cadmium were studied using the Derringer desirability function. The optimum analytical conditions were found to be TPN concentration of 2.0 μM, pH of 9.5, and accumulation potential at ?0.4 V vs. Ag/AgCl with an accumulation time of 60 s. The peak currents are proportional to the concentration of iron, copper and cadmium over the 1–80, 0.5–100 and 1–100 ng mL^?1 ranges with detection limits of 0.5, 0.4 and 0.9 ng mL^?1_, respectively. The R.S.D. at a concentration level of 20 ng mL^?1 of iron, copper and cadmium were 2.5%, 0.9% and 1.5% (n=6), respectively. The procedure was applied to the simultaneous determination of iron, copper and cadmium in the tap water and some synthetic samples with satisfactory results.     

Determination of cobalt by catalytic-adsorptive differential pulse voltammetry in the presence of 2-aminocyclopentene-1-dithiocarboxylic acid and nitrite

A novel method for the determination of cobalt(II) by stripping voltammetry is described. It involves an adsorptive accumulation of the cobalt(II)-2-aminocyclopentene-1-dithiocarboxylic acid complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the catalytic reduction current of the complex at –1.4 V at pH = 9 (vs. Ag/AgCl). The effects of various experimental parameters on the catalytic current were investigated. An accumulation time of 60 s results in a low experimental limit of detection of 0.1 ng/mL of Co(II), and 0.50 to 40.0 ng/mL of cobalt can be determined. The relative standard deviation at 0.50 ng/mL is 2.8%. Possible interferences from co-existing ions were also investigated. Received: 17 August 1998 / Revised: 16 November 1998 / Accepted: 20 November 1998     

Speciation analysis of inorganic form of arsenic in ground water samples by hydride generation atomic absorption spectrometry with insitu trapping in graphite tube

This paper presents the results of a study on the optimization of the determination of total arsenic and its species using the absorption atomic spectrometry method combined with hydride generation and in-situ concentration on the inner walls of the graphite tube. To ensure a maximum efficiency of the in-situ analyte concentration on the graphite tube walls, a palladium modifier subjected to preliminary thermal reduction was used. The limits of detection (3σ) were 0.019 ng/mL for total As and 0.031 ng/mL for As(III) at the preliminary analyte concentration for 60s. The optimised procedure of the analyte concentration on the inner walls of the atomiser (graphite tube) was applied for determinations of arsenic in samples of ground water. The content of arsenic in the samples studied varied from 0.21 ng/mL to 0.80 ng/mL for As(III), and from 0.19 ng/mL to 1.24 ng/mL for As(V).     

Determination of cobalt by catalytic-adsorptive differential pulse voltammetry in the presence of 2-aminocyclopentene-1-dithiocarboxylic acid and nitrite

A novel method for the determination of cobalt(II) by stripping voltammetry is described. It involves an adsorptive accumulation of the cobalt(II)-2-aminocyclopentene-1-dithiocarboxylic acid complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the catalytic reduction current of the complex at –1.4 V at pH = 9 (vs. Ag/AgCl). The effects of various experimental parameters on the catalytic current were investigated. An accumulation time of 60 s results in a low experimental limit of detection of 0.1 ng/mL of Co(II), and 0.50 to 40.0 ng/mL of cobalt can be determined. The relative standard deviation at 0.50 ng/mL is 2.8%. Possible interferences from co-existing ions were also investigated. Received: 17 August 1998 / Revised: 16 November 1998 / Accepted: 20 November 1998     

Use of the differential pulse cathodic adsorptive stripping voltammetric method for the simultaneous determination of trace amounts of cadmium and zinc

A selective and sensitive method for the determination of cadmium and zinc is presented. The method is based on the adsorptive accumulation of the complexes of Cd(II) and Zn(II) ions with 4-amiono-5-methyl-2.4-dihydro-3H-1,2,4-triazol-3-tion (MMTT) onto hanging mercury drop electrode (HMDE), followed by the reduction of the adsorbed species using a voltammetric scan using differential pulse modulation. The ligand concentration, pH, potential and time of accumulation, scan rate, and pulse height were optimized. Under the optimized conditions, a linear calibration curve was obtained for the concentration of Cd(II) and Zn(II) in the range of 5–450 and 5–850 ng/mL, respectively, with a detection limit of 1.7 ng/mL Cd(II) and 1.3 ng/mL Zn(II). The ability of the method was evaluated by analysis of cadmium and zinc in water and alloy samples The text was submitted by the authors in English.     

Highly sensitive and selective measurements of cobalt by catalytic adsorptive cathodic stripping voltammetry

A very sensitive and selective catalytic adsorptive cathodic stripping procedure for trace measurements of cobalt is presented. The method is based on adsorptive accumulation of the cobalt-MTB (methyl thymol blue) complex onto a hanging mercury drop electrode, followed by reduction of the adsorbed species by voltammetric scan using differential pulse modulation. The reduction current is enhanced catalytically by nitrite. The optimum conditions for the analysis of cobalt include pH 9.0 (ammonia buffer), 2.0 μM methyl thymol blue, 0.8 M sodium nitrite and an accumulation potential of −0.5 V (versus Ag/AgCl). The peak current is proportional to the concentration of cobalt over the entire concentration range tested (0.02–500 ng ml⁻¹) with a detection limit of 0.005 ng ml⁻¹ for an accumulation time of 60 s. The method was applied to determination of cobalt in a mineral water sample and some analytical grade salts with satisfactory results.     

电感耦合等离子体发射质谱法测定钨矿石中的钨华

建立电感耦合等离子体发射质谱法测定钨矿石中钨华的含量。用氨水溶液对矿石样品进行浸取分离,将浸取液稀释10倍体积后测定,以3%盐酸溶液作为测定介质。WO3的质量浓度在0~100 ng/m L范围内与信号强度呈良好的线性关系,相关系数为0.999 9,方法检出限为0.5 ng/m L。用该方法对5个钨矿石样品和2个标准物质样品中的钨华进行测定,测定结果的相对标准偏差为2.15%~9.46%(n=12),且与经典方法极谱法测定结果的相对偏差小于10%。该方法快速、简便,精确度较高,可用于钨矿石中钨华的测定。     

Highly Selective Adsorptive Cathodic Stripping Voltammetric Determination of Uranium in the Presence of Pyromellitic Acid

A very sensitive and selective adsorptive cathodic stripping procedure for trace measurement of uranium is presented. The method is based on adsorptive accumulation of the uranium‐pyromellitic acid (benzene‐1,2,4,5‐tetracarboxylic acid) complex onto a hanging mercury drop electrode, followed by reduction of the adsorbed species by voltammetric scan using differential pulse modulation. Influences of effective parameters such as pH, concentration of pyromellitic acid, accumulation potential and accumulation time on the sensitivity were studied. The peak current was proportional to the concentration of U(IV) up to 40 ng mL^?1 with a limit of detection of 0.136 ng mL^?1 with an accumulation time of 120 s. The range of linearity enhanced to 71.4 ng mL^?1and the detection limit improved to 0.058 ng mL^?1with accumulation times of 60 s and 300 s respectively. The relative standard deviation for 10 replicate determination of 4.76 ng mL^?1 U(IV) was equal to 2.7%. The possible interference by major cations and anions are investigated. The method was applied to the determination of uranium in some analytical grade salts, seawater and in synthetic samples corresponding to some uranium alloys with satisfactory results.