稀土材料的磁热效应及其应用

本文介绍了稀土金属及其合金的磁热效应。综述了磁热效应(MCE)的热力学理论、测量MCE的实验方法;稀二金属及其合金约MCE研究结果以及磁热材料在磁致冷器方面的应用。     

（La0.5Gd0.2）Sr0.3MnO3中的磁热效应

对A位掺杂的超大磁阻材料(La0.5Gd0.2)Sr0.3MnO3的磁热效应进行了研究，通过不同温度下等温磁化(M-H)曲线的测量和计算，发现伴随铁磁．顺磁相变出现大的磁热效应，额外的磁性交换作用将导致额外的磁熵变化。     

关于室温磁制冷材料的评价

如何评价开发的新型材料是否适合在室温磁制冷机中使用，有不同的看法。将最近报道的有影响的磁制冷材料如Gd-Si-Ge系列合金，La-Fe-Si系列合金与金属钆进行对比，说明不能仅仅根据等温磁熵变的数据判断它是否适用于磁制冷机中。应该以金属钆作为室温磁制冷材料的基准材料，全面评定各个新开发的磁制冷材料的绝热温变、使用温度区间、单位体积磁熵变等参数。数据说明，金属钆在综合性能上具有优势，是目前室温磁制冷机主要采用的磁制冷剂。     

Gd7Pd3-xFex合金磁性及磁热效应的研究

采用电弧熔炼和高温退火的方法制备了Gd7Pd3-xFex(x=0, 0.2, 0.5, 0.8和1)合金材料,并对该系列合金材料的磁特性及磁热效应进行了研究。X射线粉末衍射研究表明,所有的材料均形成Th7Fe3型结构。并且随着x的增大,晶格常数、居里温度、饱和磁化强度和最大磁熵变均有所降低。相比于Gd7Pd3,掺入Fe元素的材料可以获得更接近室温的居里温度和更宽的工作温区,从而导致了7 T磁场下高达1096 J·kg^-1的相对制冷能力(RCP), Gd7Pd3-xFex有望被用于室温附近的磁制冷。     

钆基低温磁制冷无机化合物的研究进展

简要介绍了磁制冷的基本原理、表征及磁热效应的影响因素,综述了近期钆基无机化合物磁致冷剂的研究进展。近年来通过将碳酸根、硫酸根、磷酸根、氢氧根、卤素离子等相继引入钆基化合物,得到了一系列在超低温范围内具有高的磁熵变的钆基无机化合物,通过对这些钆基无机框架化合物的总结和讨论,探究了这类磁致冷材料的发展趋势。     

磁制冷材料实用化研究进展

作为新一代的制冷技术,磁制冷技术已经进入到实用化研究阶段.主要评述了最有希望实用化的La-Fe-Si系磁制冷材料的研究进展,总结了材料的成相机制,以及热处理时间、温度、不同元素等因素对成相规律的影响,介绍了最新的制备加工工艺和氢化工艺,并讨论了 La-Fe-Si材料在磁制冷机中的应用进展,展望了磁制冷材料的发展趋势.     

Dy(Co1-xMx)2(M=Al, Si)系列合金的磁熵变研究

利用电弧熔炼的方法制备Dy(Co1-xMx)2(M=Al，si)系列合金；发现用少量的Al或Si替代Co后所形成的系列合金的居里温度都有显著的提高。且随着替代量的增大，样品的相变类型从一级转为二级。文中着重研究了Dy(Co1-xMx)2系列合金的在较低磁场下(1T)的磁熵变，并且讨论了该系列合金具有较大磁熵变的原因以及用少量Al或Si替代Co后对磁熵变的影响，同时对它们的应用前景也进行了探讨分析。     

La0.7Ca0.3MnO3薄膜庞磁电阻(CMR)现象的分析

针对La0.7Ca0．3MnO3薄膜材料中磁团簇的特性及其对材料庞磁电阻(CMR)现象的影响进行了研究。根据实验数据，利用Wagner等提出的数学模型，对La0.7Ca0.3MnO3薄膜中的磁团簇随温度的变化行为特性进行了研究；通过对La0.7Ca0．3MnO3薄膜相关实验数据的拟合，发现La0．7Ca0．3MnO3薄膜的居里温度范围应当在245～250K之间，从而进一步缩小了该材料居里温度的误差范围；还通过计算MR随磁团簇总角量子数J的变化，研究了制约和影响MR值的主要因素，发现磁团簇尺寸在La0．7Ca0.3MnO3薄膜的CMR现象中扮演了重要角色。     

不同工艺和原料对Mn_(1.2)Fe_(0.8)P_(0.48)Si_(0.52)化合物磁热效应的影响

用不同的工艺和原料制备了3个名义成分相同的Mn1.2Fe0.8P0.48S i0.52化合物。X射线衍射结果表明,3个化合物均为Fe2P型六角结构(空间群为P-62m),并且存在少量的(Fe,Mn)3S i相。通过磁性测量发现,3个样品的居里温度有所不同,但是都在室温附近(270~290 K)。以Fe2P为原料制备的化合物具有较大的磁熵变,在1.5 T的磁场变化下其最大磁熵变为13.6 J.(kg.K)-1。以行星样品球磨机制备的化合物具有较小的热滞,最小热滞为6.7 K。这些表明不同的制备工艺和原料对化合物的居里温度、热滞和磁熵变都具有一定的影响。同时低成本的原料、简单的制备工艺、较小的热滞和较大的磁熵变使得Mn1.2Fe0.8P0.48S i0.52化合物成为一种理想的室温磁致冷候选材料。     

定向凝固法制备稀土超磁致伸缩材料

对Ｔｂ０３Ｄｙ０７Ｆｅ１９５超磁致伸缩材料定向凝固过程进行了研究和分析，结合ＴｂＤｙＦｅ合金凝固特性，研究了凝固参数（包括定向凝固速率Ｖ和固液界面温度梯度Ｇ）、样品尺寸及起始晶粒取向三个主要因素对ＴｂＤｙＦｅ合金样品轴向取向的影响。当定向凝固参数（Ｇ／Ｖ）控制在适当范围，有利于保持平直的固液界面，因此有利于形成轴向＜１１２＞取向；当Ｖ增大或Ｇ减小，固液界面出现下凹，将影响择优取向的形成。样品尺寸与Ｇ和Ｖ应该相匹配，样品直径太大不利于保持平直的固液界面，因此不利于形成轴向＜１１２＞取向。采用＜１１２＞取向的晶粒作籽晶可以加快晶粒的择优竞争生长过程，有利于形成轴向完全＜１１２＞取向。这些因素的恰当控制，制备出了轴向具有完全＜１１２＞取向的Ｔｂ０３Ｄｙ０７Ｆｅ１９５合金样品，对样品进行高温退火处理，磁致伸缩性能达到了近１７００×１０－６。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.