Theoretical calculation of vertical ionization potentials of B2H6 by means of ΔESCF procedures

The vertical ionization potentials (IPS ) of B₂H₆ are calculated by means of the ΔE_SCF procedure, within the scheme of ab initio LCAO-MO-HF-SCF . The basis set used is LEMAO -3G. The scaling factors of the various atomic orbitals for the ground state and for the various hole states are optimized independently. The iteration procedure is specially designed to avoid the changes of the symmetry of the remaining occupied orbitals. The 1 ag (B1s) hole is found to be localized. The vertical IP of the 1 ag electron is calculated to be 196.5 eV, in fair agreement with experimental value. The D_2h symmetry is thereby broken and reduced to C_2V symmetry. The valence holes are found to be delocalized. The calculated vertical IPS are: 21.781, 16.974, 14.842, 14.389, 13.599, and 12.380 eV for the 2ag, 2b1u, 1b3u, 1b2u, 3ag, and 1b3g electrons, respectively. The agreement with experimental values is much better than the Koopmans' values. All these results are in favor of the concept that the nature of the convelent bond should be considered as a result of the mutual interactions and mutual conditioning between the wave nature of the electronic motion on the one side and the various attractive and repulsive factors on the other side.     

A method for simulation of photochemical processes and calculation of quantum yields of reactions

The possibility of construction of a semiempirical method for simulation of photochemical processes and calculation of quantum yields of reactions has been studied. The practicability of the approach was demonstrated for the o-xylene → m-xylene, m-xylene → p-xylene, m-xylene → o-xylene, and o-diethylbenzene → m-diethylbenzene photoisomerization reactions as an example. The calculated quantum yields of the reactions are in qualitative agreement with experimental data.     

Study of transfer of trace elements from soil to medicinal plants in the environment of Mangalore

The concentration of five trace elements Cr, As, Pb, Rb and Sr in seven medicinal plants Garcinia indica, Ficus benghalensis, Flacartia Montana, Nyctanthes arbor-tristis, Morinda citrifolia, Ficus recemosa, Barringtonia acutangula and associated soils were analyzed using ICP-MS. In plant the elemental concentrations of Cr, Pb, Rb and Sr vary widely and in soil the elemental concentrations of Cr, As and Sr showed wide variation. Selective enrichment of elements Rb and Sr was observed in some plants. The soil to plant transfer ratio was significant for Sr. The results of these systematic investigations are presented and discussed in this paper.     

Effect of temperature of liquid sulphur on kinetics of transformation of chains in its amorphous modification

The rate of transformation of the chains in amorphous sulphur was examined by calorimetry at 298 K. The amorphous samples were remelted at the temperatureT _f in the range from 458 to 573 K. Increase ofT _f decreased the transformation rate. The results satisfy the equationX=1-exp[-(kt)^z] (X=transformation degree,t=time, andk andz=constants). A one-stage transformation was observed for samples remelted atT _f473 K. ForT _f 523 K, transformation in two stages was observed.The effects ofT _f on the kinetics of nucleation and the growth of the nuclei are discussed.     

Molecular characterisation of Bacillus chitinase for bioconversion of chitin waste

In this work chitin was extracted chemically from shrimp shells. Seventeen Bacillus isolates were screened for chitinolytic activity. The chitinolytic strains of Bt. were screened at different temperatures and pHs for their hydrolytic potentials. By using a pair of specific primers, endochitinase gene was amplified from SBS Bt-5 strain through PCR, and then cloned into pTZ57 TA cloning vector and transferred in Escherichia coli DH5α strain. The sequenced gene (GenBank Accession No: HE995800) consists of 2031 nucleotides capable of encoding 676 residues. The protein consisted of three functional domains with a calculated molecular mass of 74.53 kDa and a pI value of 5.83. The amino acid sequence of chi gene showed 99% similarity to the genes of Bt MR11 endochitinase, Bt serovar kurstaki chitinase (kchi), Bt strain MR21 endochitinase and Bacillus cereus B4264.     

Alkyl Rearrangement of Derivatives of 2-Anilino-4,6-dialkoxy-1,3,5-triazines in the Solid- and Liquid-state

Abstract

2-Anilino-4,6-dimethoxy-1,3,5-triazine (13), 2-anilino-4,6-diethoxy-1,3,5-triazine (14), 2-(2′-nitoanilino) 4,6-dimethoxy-1,3,5-triazine (15) undergo alkyl rearrangement in the liquid-state, while 2-(4′-nito-anilino) 4,6-dimethoxy-1,3,5-triazine (16) undergoes methyl rearrangement in the solid-state. The crystal structure and thermal behavior of these compounds are described. 13 crystallizes in monoclinic P2₁/c space group, a = 11.030(4), b = 6.345(4), c = 16.315(4) Å, β = 90.76(3)°. The calculated density for Z = 4 is 1.351 Mg/m³. The number of unique reflections collected is 2092, and the final R = 0.0643 [I > 2σ(I)]. 14 crystallizes in triclinic P-1 space group, a = 7.700(2), b = 9.723(3), c = 10.154(3) Å, α = 78.78(3), β = 70.32(3), γ = 73.67(3)°. The calculated density for Z = 2 is 1.266 Mg/m³. The number of unique reflections collected is 2401, and the final R = 0.0561 [I > 2σ(I)]. 15 crystallizes in monoclinic P21/m space group, a = 11.020(3), b = 6.600(2), c = 8.409(3) Å, β = 99.72(3)°. The calculated density for Z = 2 is 1.527 Mg/m³. The number of unique reflections collected is 1153, and the final R = 0.0502 [I > 2σ(I)]. 16 crystallizes in monoclinic P21/c space group, a = 7.499(3), b = 21.846(5), c = 7.895(3) Å, β = 115.42(3)°. The calculated density for Z = 4 is 1.576 Mg/m³. The number of unique reflections collected is 2036, and the final R = 0.0757 [I > 2σ(I)].     

Kinetics of the gas-phase thermal elimination of N-alkyl-pyrazoles

The kinetic study of the gas-phase thermal elimination reactions of N-ethyl-3,5 dimethyl-pyrazole (I), N-ethyl-pyrazole (II), N-sec-butyl-pyrazole (III), and N-tert-butyl-pyrazole (IV) using a flow system is reported. After obtaining activation parameters for I we carried out competitive reactions with II, III and IV using I as internal standard to obtain their E_a. The values of Δ(ΔH) calculated for II, III and IV agree with the little differences in E_a experimentally found.     

Plasma polymerization of tetrafluoroethylene. IV. Comparison of ethylene and tetrafluoroethylene by measurement of electron temperature and density of positive ions

The double probe method was applied to plasma of tetrafluoroethylene (TFE) and ethylene and the electron temperature (T_e) and density of positive ions (n_p) were measured at various discharge wattages. The probe current-probe voltage diagrams for TFE were different from those for ethylene. The shape of its diagram indicates that a considerable number of negative ions exist in TFE plasma. The levels of n_p for TFE were also nearly six times greater than those for ethylene at the same discharge current. The dependence of TFE polymer deposition and the chemical structure of the polymer, based on ESCA data on discharge current, was related to T_e and n_p measured by the probe method. The values of T_e and n_p may not be directly related to the polymer formation in a plasma; the method provides a direct measure of plasma energy density where plasma polymerization takes place, whereas it cannot be accurately estimated by the input energy of a discharge. It was found that plasma energy density based on (n_pT_e) for TFE plasma and that for ethylene differ significantly at the same level of input parameter (W/FM), where W is the discharge wattage, F is the volume flow rate, and M is the molecular weight of the monomer.     

Study of kinetics and mechanism of the acid dissociation of copper(II) complex of novel C-functionalized macrocyclic dioxotetraamines

The kinetics of the acid dissociation of copper(II) complexes of novel C-functionalized macrocyclic dioxotetraamines has been studied by means of a stopped-flow spectrophotometer. The acid dissociation rate follows the law V_d = C_comkK₁K₂H ²/(1+K₁H+K₁K₂H ²). From the experimental facts we have obtained, the dissociation kinetics are interpreted by a mechanism involving the negatively charged carbonyl oxygen of the complex being rapidly protonated in a pre-equilibrium step, the rate-determining step being intramolecular hydrogen (enolic tautomer) migration (to imine nitrogen). The dissociation rate reached a plateau in the strongly acidic solution. By means of temperature coefficient method, ΔH ^φ, ΔS ^φ of the pre-equilibrium step and ΔH ^≠, ΔS^≠ of the rate-determining step were obtained. The results of 13-membered macrocyclic dioxotetraamines have been discussed. The influence of the substituents to the acid dissociation rates has also been discussed. The Bronsted type linear free energy relationships do also exist in these C-functionalized dioxotetraamine copper(II) complexes.     

Enumeration of the isomers of phenylenes

Summary The [h]phenylene C_6h H_2h+4 isomers are enumerated up toh=12. The numbers are compared with old and new data for C _n H₅ isomers of benzenoids, fluoranthenoids and biphenylenoids.

---

Anzahl möglicher Isomerer von Phenylenen

Zusammenfassung Die Anzahl der [h]Phenylen-Isomeren C_6h H_2h+4 wurde bish=12 ausgewertet. Die Zahlen wurden mit alten und neuen Daten für C _n H _s -Isomere von Benzenoiden, Fluoranthenoiden und Biphenyloiden verglichen.

     

Investigation of the viscosity of solutions of graft copolymers

Living polystyrene was grafted on fractions of poly(methyl methacrylate) by an anionic grafting reaction. Unreacted polystyrene was separated by fractional precipitation. The composition of copolymer, i.e., the molecular weight of main chains and side chains, was determined. The influence of molecular weight and structure of graft copolymers on the intrinsic viscosity of solutions was examined. This may be expressed in the form [η] = KM^agⁿ. The dependence between a and n in this equation was established.     

Polymer reactions. V. Kinetics of autoxidation of polypropylene

The rate constants for the autoxidation of polypropylene were determined by a combined ESR, volumetric, and chemical method. The values of k_i, k_p, and k_t at 110°C. are 3 × 10^?4 sec.^?1, 1.9 l./mole-sec., and 3 × 10⁶ l./mole-sec., respectively. The values of k_i and its activation energy are the same as those for the decomposition of polypropylene hydroperoxide, thus identifying the latter as the principal initiation process. The values of the temperature-independent k_t suggest that secondary peroxy radicals are the terminating species. The rate constants are compared with rate constant ratios for initiated autoxidations of squalane and other related systems.     

Microcalorimetry studies on the antimicrobial actions of volatile oil of dry ginger

The rate of heat output is one of the suitable measurements of metabolic activity of the organism. In this article, microcalorimetry was first applied to study the effect of volatile oil of dry ginger (ginger oil) on Escherichia coli and Staphylococcus aureus growth. The power–time curves were plotted with a TAM air isothermal microcalorimeter. The parameters such as the growth rate constant μ, the peak-time T _p, inhibitory ratio I, and half-inhibitory concentration IC₅₀ were calculated. From the data, the relationships between μ and the concentration of ginger oil c were established. The results revealed that the μ of E. coli and S. aureus both gradually declined with the increase of the c, there were linear relationships between μ and c, and ginger oil had stronger inhibitory effect on S. aureus than on E. coli. Results obtained from our study strongly suggest that microcalorimetry is an ideal method to investigate the effect of drug on microorganism.     

Control of Chromophore Symmetry by Positional Isomerism of Peripheral Substituents

The first example of the control of porphyrinoid chromophore symmetry based on the positional isomerism of peripheral substituents has been achieved by preparing tetraazaporphyrins (TAPs) with C_4h, D_2h, C_2v, and C_s symmetry due to the relative arrangement of peripheral tert‐butylamino and cyano groups as push and pull substituents, respectively. The four structural isomers were successfully isolated and characterized by ¹H NMR spectroscopy and X‐ray crystallography. The band morphology in the Q‐band region varies depending on the molecular symmetry due to the significant perturbation introduced into the chromophore by the push and pull substituents. The C_4h and C_2v isomers exhibit a single Q band, whereas the Q bands of the D_2h and C_s isomers show a marked splitting. The magnetic circular dichroism spectra indicate that the push–pull TAPs retain the properties of the 16‐membered 18π‐electron perimeter generally observed for porphyrinoids. Theoretical calculations have demonstrated that the perturbation introduced by the substituents lowers the D_4h symmetry of the parent TAP π‐conjugated system, and this results in significant spectral changes. A novel approach to the fine‐tuning of the spectral properties of porphyrinoids based on changes in the chromophore symmetry is described.     

Radical-Initiated homopolymerization and copolymerization of methylthiomethyl methacrylate

Methylthiomethyl methacrylate (MtMA) was synthesized and homopolymerized in solution. The poly(MtMA) is readily soluble in benzene, acetone, tetrahydrofuran, and methylene chloride at room temperature. The values of K and a in the Mark–Houwink equation, [η] = KM^a, were found to be K = 2.88 × 10^–5 and a = 0.75 when M = M_w. The glass transition temperature of poly(MtMA) was observed to be 72°C by thermomechanical analysis. Intramolecular anhydride formation occurred when poly(MtMA) was heated to 250–300°C. The kinetics of MtMA homopolymerization was investigated in benzene, using azobisisobutyronitrile as initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.5[MtMA]^1.05 and the overall activation energy was calculated to be 75.7 kJ/mol. The relative reactivity ratios of MtMA in styrene copolymerizations (r₁ = 0.33, r₂ = 0.55) were obtained. Applying the Q-e scheme led to Q = 1.07 and e = 0.51 for MtMA.     

The structure of granticin and of granticin B. The crystal structure of tri-O-acetyl-O-iodoacetyl-granaticins

The crystal structure of tri-O-acetyl-O-iodoacetyl-granaticin has been determined by X-ray analysis of threedimensional diffractometer intensity data. The crystals are orthorhombic, a = 17.85, b = 14.90, c = 11.26 Å, Z = 4, space group P2₁2₁2₁. The molecular structure was established by the heavy atom method and refined by full-matrix least-squares analysis. The molecular constitution and configuration is given by formula II. The chirality was determined by the use of anomalous dispersion effects.     

Viscoelasticity and birefringence of polyisoprene

The complex Young's modulus, E^*(ω), and the complex strain-optical coefficient, O^*(ω), which is the ratio of the birefringence to the strain, were measured for polyisoprene (PIP) over a frequency range of 1 ～ 130 Hz and a temperature range of 22 ～ ?100°C. The imaginary part of O^*, O″, was positive at low frequencies and negative at high frequencies. The real part, O′, was always positive and showed a maximum. The complicated behavior of O^* could be understood by the assumption that E^* = E_R^* + E_G^* and O^* = C_RE_R^* + C_GE_G^*, where E_R^* and E_G^* were complex quantities and C_R and C_G were constants. The C_R value, equal to the ordinary stress-optical coefficient measured in the rubbery plateau zone, was 2.0 × 10^?9 Pa^?1. The C_G value, defined as the ratio O″/E″ in the glassy zone, was ?1.1 × 10^?11 Pa^?1. The E_G^*, which was the major component of E^* in the glassy zone, showed almost the same frequency dependence as that of polystyrene and polycarbonate. The E_R^*, which was dominant in the rubbery zone, was described well by the bead-spring theory. The temperature dependence of the E_G^* was stronger than that of the E_R^*. This difference caused the breakdown of the thermorheological simplicity for E^* and O^* around the glass-to-rubber transition zone. © 1995 John Wiley & Sons, Inc.     

Spectral Study of the Reaction of Functionally Substituted Enehydrazides with Proton Donors

Reactions of new enehydrazides, N',N'-dimethyl-N-vinylpropenohydrazide and N',N'-dimethyl-N-vinylbenzohydrazide with chloroform, phenol, and hydrogen chloride in carbon tetrachloride were studied by IR spectroscopy. In the first two cases, molecular complexes are formed between the hydrazide and proton donor. The reaction of N',N'-dimethyl-N-vinylpropenohydrazide with HCl results in formation of dihydropyrazole derivative which exists as a tautomeric mixture of the major lactam and minor lactim forms. N',N'-dimethyl-N-vinylbenzohydrazide reacts with hydrogen chloride to give protonated form in which proton is localized on the amino nitrogen atom. The structure of the initial compounds and the products was analyzed in terms of AM1 quantum-chemical calculations.     

呋喃西林水溶液在光和热作用下的稳定性

The influence of both light and heat on the stability of nitrofurazone aqueous solution was studied. Results show that in either heating experiments or the exposure to light at high temperatures, the degradation rate obeyed zero-order kinetics. The total rate constant ktotal caused by both light and heat can be divided into two parts: ktotal =kdark klight, where kdark and klight are the degradation rate constants caused by heat and light, respectively. The klight can be expressed as klight=Alight*exp(-Ea,light/RT)*E, where E is the illuminance of light, and Alight and Ea,light both are experimental constants. The values of these kinetic parameters were determined based on the experiments in the dark and upon exposure to three different light sources. Results show that the values of Alight and Ea, light varied with the light source. To save time, labor, and drugs, exponential heating experiments were employed and compared with the isothermal experiments. Results indicated that kinetic parameters obtained by exponential heating experiments are comparable to those obtained by isothermal experiments either in the dark or upon exposure to light.