双端正离子活性链的研究——α,ω—二胺基聚丁二醇-聚酯-聚丁二醇三嵌段低聚物的合成

<正> 本实验室前项工作曾证明用脂肪二酰氯与高氯酸银引发四氢呋喃(THF)在0—50℃下聚合可形成没有链终止和链转移反应的活性聚合链.为了减少聚丁二醇醚结晶趋势,又制备了双端活性的THF-环氧丙烷无规共聚醚链.本文则通过THF的开环聚合,将一个非“活性”的聚酯转变成为双端活性链,合成了伯胺端基聚丁二醇-聚酯-聚丁二醇遥爪低聚物,并用以增韧环氧树脂.     

聚对苯二甲酸乙二醇酯和聚对苯二甲酸丁二醇酯化学扩链反应

综述了用于聚对苯二甲酸乙二醇酯（ＰＥＴ）、聚对苯二甲酸丁二醇酯（ＰＢＴ）化学扩链反应的羧基加成型和羟基加成型扩链剂，以及缩合型扩链反应、羧基加成型扩链反应和羟基加成型扩链反应、羧羟基同时加成型扩链反应。讨论了扩链反应、反应特性和扩链产物的性能，并简要介绍了国内研究概况。参考文献２０篇。     

官能化聚四氢呋喃-b-聚异丁烯-b-聚四氢呋喃三嵌段共聚物的合成与性能

采用2-氯-2,4,4-三甲基戊烷或对二枯基氯为引发剂和TiCl4或FeCl3为共引发剂,引发异丁烯(IB)可控/活性正离子聚合与官能端基转化,设计合成不同分子量及窄分子量分布的端基官能化聚异丁烯,如双端烯丙基溴官能化聚异丁烯(Br-PIB-Br)或双端烯丙基胺官能化聚异丁烯(H2N-PIB-NH2).采用烯丙基溴/高氯酸银体系引发四氢呋喃(THF)开环聚合,合成聚四氢呋喃活性链(PTHF+).进一步通过将IB可控/活性正离子聚合与THF可控/活性正离子开环聚合2种方法相结合,设计合成2种新型官能化聚四氢呋喃-b-聚异丁烯-b-聚四氢呋喃(PTHF-b-PIB-b-PTHF)三嵌段共聚物:(1)以上述Br-PIB-Br为大分子引发剂,在AgClO4作用下引发THF活性正离子开环聚合,采用水终止活性链端,设计合成双端为羟基的HO-PTHF-b-PIB-b-PTHF-OH三嵌段共聚物(简称:FIBF-OH);(2)以上述合成的PTHF+活性链与H2NPIB-NH2链端胺基发生高效亲核取代反应,设计合成中间链段连接点含―NH―官能基团的PTHF-b-HNPIB-NH-b-PTHF三嵌段共聚物(简称:FIBF-NH).在上述三嵌段共聚物中,极性PTHF链段与非极性PIB链段的热力学不相容,导致其呈现明显的微相分离,且微观形态与共聚组成相关.PTHF均聚物易结晶,在上述共聚物中由于PTHF链段单端受限致其结晶性减弱.三嵌段共聚物分子链的中间连接点含―NH―官能基团,具有更强的氢键作用,促进PTHF链段重排并结晶,易形成更紧密的超分子网络结构,导致即使在PTHF链段相对分子量为0.7 kg·mol^-1时仍具有较强的结晶性,且结晶熔融温度明显提高.此外,由于FIBF-NH中形成超分子网络结构,使材料具有优异的自修复性能,材料表面的切痕在常温下10 min后可以完全自愈合.本文设计合成的新型官能化PTHF-b-PIB-b-PTHF三嵌段共聚物兼具有PTHF与PIB的优良性能,在生物医用、智能修复等功能材料领域具有潜在的应用前景.     

高分子量立构复合结晶的三枝化PPO-PDLA-PLLA嵌段共聚物

以三枝化低不饱和度聚环氧丙烷(PPO)引发D-丙交酯(D-LA)逐步开环聚合, 合成了三枝化聚环氧丙烷-聚右旋乳酸(PPO-PDLA)共聚物. 用辛酸亚锡Sn(Oct)₂与PPO-PDLA端羟基反应进行Sn(Oct)封端, 制备了三枝化PPO-PDLA-Sn(Oct)预聚物. 再于130 ℃下, 以其作为大分子引发剂与L-丙交酯(L-LA)开环聚合, 合成了分子量>10⁵的三枝化PPO-PDLA-PLLA嵌段共聚物. 活性端基的引入, 降低了聚合反应温度, 从而降低了聚合中的酯交换或热降解反应发生的概率. 实现了高分子量PPO-PDLA-PLLA嵌段共聚物的合成. 结构测试结果表明, 合成的嵌段共聚物具有分子结构易控及立构规整度高等特点. 在结晶-熔融-再结晶重复热处理下, 三枝化PPO-PDLA-PLLA嵌段共聚物仅发生立构复合聚乳酸结晶, 且结晶能力稳定.     

纳米SiO2表面上的聚对苯二甲酸丁二醇酯预聚物接枝改性

纳米SiO2表面上的聚对苯二甲酸丁二醇酯预聚物接枝改性;纳米粒子; 表面改性;接枝; 聚对苯二甲酸丁二醇酯     

接枝树形支化分子双亲性嵌段共聚肽的合成及性能研究

分别以叠氮丙胺和丙炔胺为引发剂,采用氨基酸环内酸酐开环聚合法(NCA-ROP),引发L-谷氨酸-γ-苄酯-N-羧基-环内酸酐和L-谷氨酸-γ-氯乙醇酯-N-羧基-环内酸酐聚合得到链端基为叠氮基的聚(L-谷氨酸-γ-苄酯)(PBLG)和链端基为炔基的聚(L-谷氨酸-γ-氯乙醇酯)(PCELG)均聚物.联合点击化学法(click chemistry)制备了一系列聚(L-谷氨酸-γ-苄酯)-b-聚(L-谷氨酸-γ-氯乙醇酯)(PBLG-b-PCELG),再通过对嵌段共聚物侧基氯进行化学修饰,将二代的甲基烷氧醚类亲水性树形枝化分子(G2)接枝到侧链上,形成一系列树形支化分子接枝聚肽双亲性嵌段共聚物,通过核磁(NMR)、红外光谱(IR)和凝胶渗透色谱(GPC)对其化学结构进行了表征,并采用紫外-可见光谱(UV-Vis)研究了聚合物结构及其溶液浓度对其温敏行为的影响规律.     

生物可降解聚乙二醇-b-聚对苯二甲酸丁二醇酯共聚物载药微球的制备

嵌段共聚物;生物可降解性;左炔诺孕酮;载药性;生物可降解聚乙二醇-b-聚对苯二甲酸丁二醇酯共聚物载药微球的制备     

两亲性聚肽三嵌段共聚物的自组装行为

通过开环反应,合成了聚（L-谷氨酸-γ-苯甲酯）-b-聚乙二醇-b-聚（L-谷氨酸-γ-苯甲酯）（PBLG-b-PEG-b-PBLG）三嵌段聚肽共聚物。运用核磁共振氢谱和凝胶渗透色谱表征了聚合物的结构。凝胶渗透色谱测试表明合成的聚合物分子量分布窄。以选择性溶剂透析的方法制备了自组装聚集体,通过透射电子显微镜、扫描电子显...     

用三氟化硼引发体系制备聚丁二醇

分子量在3000以下特别是1000或2000的聚丁二醇(PTMG)是制备嵌段聚醚聚氨酯及嵌段聚醚聚醋弹性体的重要软段原料。用三氟化硼(BF_3)体系引发制备PTMG巳有报道,但尚难在工业上采用,主要是引发效率低。前已报道,BF_3-环氧氯丙烷(ECH)体系的引发效率比BF_3-环氧乙烷(EO)体系高2.5～6倍,比BF_3-环氧丙烷(PO)体系高2～3倍。本文用BF_3-ECH为引发体系,并用水为分子量调节剂制备分子量1000或2000的PTMG,测     

聚对苯二甲酸乙二醇酯/聚乙二醇醚插层嵌段共聚物的结晶性能

合成了不同用量、不同分子量的聚乙二醇醚(PEG)或聚丁二醇醚(PTMC)与聚对苯二甲酸乙二醇酯(PET)/蒙脱土(MMT)的嵌段共聚物。研究了MMT在共聚物中的分散状态及PEG或PTMG对PET/MMT插层聚合物结晶性能的影响。结果表明,MMT在共聚物中以纳米尺寸分散;加入PEG或PTMG增强了聚酯链段的柔顺性,使共聚物熔体降温过程的结晶温度提高,冷结晶温度降低,即插层嵌段共聚物的结晶速率提高;在合成的共聚物中,分子量为2000,用量为DMT的6%的PEG对插层共聚物结晶速率的促进作用最大     

Synthesis,self-assembly,and pH-responsive drug release of PHMEMA-PEG-PHMEMA ABA triblock copolymers

Abstract

A series of tertiary amine containing PHMEMA-PEG-PHMEMA ABA triblock copolymers were synthesized by atom transfer radical polymerization (ATRP) using bromine-capped poly(ethylene glycol) (Br-PEG-Br) and 2-(hexamethyleneimino)ethyl methacrylate (HMEMA) as macro-initiator and monomers, respectively. The chemical structures and molecular weights of triblock copolymers were characterized by ¹H NMR and gel permeation chromatography (GPC). The self-assembly behaviors of copolymers in different pH conditions were studied by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Triblock copolymers self-assembled into micelles in water (pH 7.4) and the micelles disassembled at acidic pH (pH 5.0). Anticancer drug doxorubicin (DOX) was used as a drug model and physically encapsulated into polymeric micelles. The drug release of DOX-loaded polymeric micelles was pH-responsive; the drug-loaded micelles that had higher contents of tertiary amine in polymer pendant groups showed faster release speed. In addition, the drug-loaded micelles showed excellent inhibition efficacy against HeLa cells in vitro.     

Precise Synthesis of New Triblock Co- and Terpolymers by a Methodology Combining Living Anionic Polymers with a Specially Designed Linking Reaction

Five A-B-A′, A-C-A′, B-A-B′, C-A-C′, and C-B-C′ triblock terpolymers with block orders difficult to synthesize by sequential polymerization have been successfully synthesized by a new methodology combining living anionic polymers with a specially designed linking reaction using α-phenylacrylate as the reaction site. Here, A(A′), B(B′), and C(C′) represent groups of polymers (having chain-end anions with different nucleophilicities), which are only polymerizable from A(A′) to B(B′) to C(C′) via sequential polymerization. The corresponding polymers are polystyrene (A) and poly(α-methylstyrene) (A′), poly(2-vinylpyridine) (B) and poly(4-vinylpyridine) (B′) and polymers from methacrylate type monomers like poly(methyl methacrylate) (C), poly(tert-butyl methacrylate) (C′), poly(2-hydroxyethyl methacrylate) (C′), poly(2,3-dihydroxypropyl methacrylate) (C′), and poly(ferrocenylmethyl methacrylate) (C′). Furthermore, three synthetically difficult B-A-B, C-A-C, and C-B-C triblock copolymers with molecular asymmetry in both side blocks have also been synthesized by the developed methodology. All of the polymers thus synthesized are quite new triblock terpolymers and copolymers with well-defined structures, i.e., precisely controlled molecular weights, compositions and narrow molecular weight distributions (M_w/M_n ≤ 1.05).     

Hydrocarbon polymers containing six-membered rings in the main chain. Microstructure and properties of poly(1,3-cyclohexadiene)

The relationship between the microstructure and the properties of poly(1,3-cyclohexadiene)s, obtained by living anionic polymerization with an alkyllithium/amine system, and their hydrogenated derivatives are reported. The 1,2-bond/1,4-bond molar ratio of poly(1,3-cyclohexadiene) was determined by measuring 2D-NMR with the H H COSY method. The glass transition temperature of poly(1,3-cyclohexadiene) was found to rise with an increase in the ratio of 1,2-bonds to 1,4-bonds or with an increase of the number average molecular weight. The 1,2-bond of the polymer chain gives a high flexural strength and heat distortion temperature. Hydrogenated poly(1,3-cyclohexadiene) has the highest T_g (231°C) among all hydrocarbon polymers ever reported. 1,3-Cyclohexadiene–butadiene–1,3-cyclohexadiene triblock copolymer and 1,3-cyclohexadiene–styrene–1,3-cyclohexadiene triblock copolymer have high heat resistance and high mechanical strength. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1657–1668, 1998     

Preparation and properties of phenylene oxide–aryl ether sulphone block copolymers and their blends

We have prepared triblock copolymers of poly(phenylene oxide) (PPO) and polysulphone (PSF) of the form PPO–PSF–PPO in order to assess their intrinsic mechanical properties and their potential as interfacial compatibilizers in polystyrene/PSF blends. For sufficiently long polysulphone block lengths, we observed microphase separation both in the triblock copolymers and in their blends with polystyrene. The triblock polymers, nevertheless, showed very similar microdeformation behavior to the PPO homopolymer, suggesting the phase separation to play a minor role. On the other hand, the compatibility of the poly(phenylene oxide) blocks and polystyrene ensured a high degree of interphase adhesion in blends containing both polystyrene and free PSF, even for relatively high homopolymer molecular weights. © 1996 John Wiley & Sons, Inc.     

疏水链段对两亲性三嵌段共聚物在水中聚集行为的影响

以结构明确的两端为短的聚苯乙烯(PS)或聚甲基丙烯酸甲酯(PMMA)链段,中间为长的聚乙二醇(PEG)链段的PS-b-PEG-b-PS和PMMA-b-PEG-b-PMMA两亲性三嵌段共聚物为对象,研究了PS和PMMA链段对其在水中形成胶束和凝胶的影响.两种三嵌段共聚物在水中形成以PS或PMMA链段为核、PEG链段为壳的球形胶束,流体力学半径Rh,app为15.3~24.3 nm,并随PEG链段长度增长而增大.临界胶束浓度CMC均小于0.01 mg/mL,随着PS和PMMA链段长度的增加而减小.PS-b-PEG-b-PS浓度高于4.5 wt%可形成较强的疏水缔合的物理凝胶,平衡模量Ge可达到103Pa;PMMA-b-PEG-b-PMMA浓度高于7.5 wt%可以形成弱的凝胶,Ge<10 Pa.凝胶的储存模量G′和损耗模量G″均随着PS或PMMA链段的增长而增大.     

Synthesis and characterization of PISOZ-PDMS-PISOZ triblock polymer vesicles

In this project, we synthesized poly(2-isopropyl-2-oxazoline)-block- poly(dimethyl-siloxane)-block-poly(2-isopropyl-2-oxazoline) (PISOZ-PDMS-PISOZ) triblock polymer, which has been prepared as vesicles. The triblock polymer was characterized by ¹H-NMR, F-NMR, LS and TEM. The size of the empty vesicle is about 60 nm. When curcumin was encapsulated into PISOZ-PDMS-PISOZ triblock polymer, formed well defined vesicles in a size about 70 nm.     

SYNTHESIS OF TRIBLOCK COPOLYMERS OF STYRENE AND ISOPRENE BY A NITROXIDE-MEDIATED LIVING FREE RADICAL POLYMERIZATION

The controlled free radical polymerization of styrene and isoprene initiated with benzoyl peroxide (BPO) in the presence of 2,2,6,6-tetramethyl piperidine-N-oxyl (TEMPO) at 125 ℃ were performed. The obtained polyisoprene and polystyrene homopolymers served as macroinitiators for block copolymerization of isoprene and styrene to synthesize poly(styrene-b-isoprene) and poly(isoprene-b-styrene) diblock copolymers. Diblock copolymers with well-defined structures as well as controlled and narrow molecular weight distribution wereobtained from the lower-mass polystyrene and polyisoprene homopolymers. These copolymers were found to be active as macroinitiators in the synthesis of the poly(styrene-b-isoprene-b-styrene) and poly(isoprene-b-styrene-b-isoprene) triblock copolymers. 1H-NMR spectroscopy and gel permeation chromatography (GPC) were used for the investigation of polymer strucmre, molecular weight and polydispersity (PD).     

双亲性三嵌段共聚物/水体系超分子结构的研究

利用小角 X-射线散射技术研完了双亲性聚氧化乙烯-聚二甲基硅氧烷-聚氧化乙烯三嵌段共聚物/水体系在高浓度的溶致性液晶相,测定了亲水区、疏水区随浓度和结构变化的尺寸等超分子结构参数。用简单的几何模型可满意地解释实验结果。     

Vesicular and tubular structures prepared from self‐assembly of novel amphiphilic ABA triblock copolymers in aqueous solutions

A kind of novel soft amphiphilic ABA triblock copolymers, poly(L ‐lysine)‐b‐poly(tetrahydrofuran)‐b‐poly(L ‐lysine), was synthesized by the anionic ring‐opening polymerization of ε‐benzyloxycarbonyl‐L ‐lysine N‐carboxyanhydride using amine‐terminated poly(tetrahydrofuran) as a macroinitiator and subsequent removal of the protecting group. The resulting copolymers possessing a nearly symmetrical and narrow molecular weight distribution were dissolved in water at an appropriate concentration range at room temperature to yield vesicles as confirmed by using negative stain TEM and DLS. Meanwhile, nanotubes were obtained as the result of the conjunction of vesicles by reducing the medium temperature as evidenced by TEM. The effect of pH and salt concentration variations on the self‐assembly behavior was also examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1042–1050, 2008