Quantitative analysis of geraniol,nerol, linalool,and α-terpineol in wine

A mixture of [(2)H(7)]-geraniol, [(2)H(7)]-nerol, [(2)H(7)]-linalool and [(2)H(7)]-alpha-terpineol was prepared for use as internal standards in a rapid and accurate analytical method, employing gas chromatography-mass spectrometry (GC/MS), to determine the concentration of geraniol, nerol, linalool and alpha-terpineol in wine. The method avoids the possible formation, degradation and interconversion of these compounds during their analysis.     

Optimized method avoiding solvent-induced response enhancement in the analysis of volatile and semi-volatile polyfluorinated alkylated compounds using gas chromatography-mass spectrometry

A method for the analysis of airborne (semi-)volatile polyfluorinated alkyl substances (PFASs) was optimized to avoid solvent-induced response enhancements as observed using ethyl acetate as extraction solvent (recoveries up to 300%, likely due to acetic acid as impurity). Of nine solvents tested, only the use of acetone, dichloromethane, methyl tert-butyl ether, and acetone:petroleum ether (1:1, v/v) resulted in recoveries below 100% and acetone:methyl tert-butyl ether (1:1, v/v) was chosen as suited extraction solvent. An appropriate GC capillary column and the application of mass-labelled internal standards appeared to be essential for these analyses. Instrumental limits of detection of <0.2 pg (dimethylperfluoroocatanesulfonamide, ethyl-[(2)H(5)]perfluorooctanesulfonamide, methyl-[(2)H(3)]perfluorooctanesulfonamide) to 8.2 pg (perfluorooctanesulfonamide) and LOQ of 0.4 pg (dimethylperfluoroocatanesulfonamide, ethyl-[(2)H(5)]perfluorooctanesulfonamide, methyl-[(2)H(3)]perfluorooctanesulfonamide) to 16.4 pg (perfluorooctanesulfonamide) were determined.     

Rapid simultaneous assay of serum estrone, estradiol, and estriol in pregnant women using methyl ether acetate derivatives by capillary gas chromatography and electron-impact mass spectrometry

A simple gas chromatographic--mass spectrometric method capable of measuring estrone, estradiol, and estriol simultaneously with a sensitivity close to that of radioimmunoassay has been developed. The estrogens in serum were extracted with diethyl ether, and internal standards (3-O-C2H3-estrone, 3-O-C2H3-estradiol, and 3-O-C2H3-estriol) were added, followed by converting to methyl ether compounds with an extractive alkylation procedure. The methyl ethers were then acetylated. Analyses were performed using a SP-2250 capillary column gas chromatograph coupled with an electron-impact mass spectrometer. The estrogen methyl ether acetate derivatives were more stable chemically and gave less fragmentation upon electron impact than the conventional trimethylsilyl derivatives. The use of selected ion monitoring of molecular ions and that of the corresponding internal standards (M + 3) provides a sensitivity down to 10 pg for estrone and estradiol and to 200 pg for estriol. The time required for the preparation of multiple samples is within 4 hours.     

Analysis of estrogens in river water and effluents using solid-phase extraction and gas chromatography-negative chemical ionisation mass spectrometry of the pentafluorobenzoyl derivatives

A procedure was developed for the analysis of estrogens in environmental water and effluents. Samples were extracted by passing through polymer-impregnated solid-phase extraction discs or C18 cartridges, followed by gas chromatography-negative chemical ionisation mass spectrometry of the pentafluorobenzoyl derivatives. The derivatives were stable and gave diagnostic negative molecular ions as the base peak for each of the major estrogens studied. The absolute recovery of estrogens spiked into clean groundwater using the disc procedure was 84-116% at the 10 ng l(-1) level (calculation not based on use of internal standards). Using doubly deuterated estradiol as internal standard added prior to extraction, the % relative standard deviation of estrogen extraction and analysis in spiked groundwater at the 10 ng(-1) level was 2.6-9.8%. Detection limits were 0.2 ng l(-1) or below for the major estrogens, based on a 2.5 litre sample. The most abundant estrogen was estrone, with concentrations over the range 6.4-29 ng l(-1) in effluents, and 0.2 to 17 ng l(-1) in water from the River Thames.     

液相微萃取-高效液相色谱联用分析化妆品中痕量的雌激素

建立了液相微萃取-高效液相色谱联用(LPME-HPLC)测定爽肤水中痕量的雌三醇、雌二醇、炔雌醇和雌酮的分析方法,研究了萃取溶剂种类、接受相体积、搅拌速度、萃取时间等对萃取效率的影响。结果表明,该方法对4种雌激素的富集倍数可达到247~343倍,方法的线性范围为1~200 μg/L,检出限为0.4~1.0 μg/L,6次平行测定的相对标准偏差为3.6%~7.3%,爽肤水中的加标回收率为101.2%~114.9%。方法简单快速、灵敏度高、环境友好,满足痕量雌激素分析的要求。     

Determination of estrone and 17α‐ethinylestradiol in digested sludge by ultrasonic liquid extraction and high‐performance liquid chromatography with fluorescence detection

Estrone, 17β‐estradiol and 17α‐ethinylestradiol are increasingly recognised as important micropollutants to be monitored in wastewater treatment plants. These estrogens are retained onto sludge due to their high adsorption and since they are largely used in land applications, the monitoring of these chemicals in sludge samples is of great importance. This study describes a method for the determination of estrone and 17α‐ethinylestradiol in fresh sludge samples. After spiking fresh digested sludge with estrone and 17α‐ethinylestradiol and maintaining in contact during 5, 30 and 60 min, the freeze‐dried samples were subjected to ultrasonic liquid extraction, with methanol and acetone, and analysed by high‐performance liquid chromatography with fluorescence detection. The average recoveries obtained for estrone and 17α‐ethinylestradiol using the different contact times were 103 ± 3 and 97 ± 4%, respectively. Fresh sludge samples from one waste water treatment plant located in Portugal were analysed and estrone was detected in primary fresh sludge, anaerobic digested sludge and dehydrated sludge at a concentration in the range of 1–4.8 μg/g. The method here developed does not require any sample clean‐up, being fast and simple, reliable and inexpensive, making possible its application for monitoring the contamination of sludge with these estrogens.     

Quantitation of estrogens in ground water and swine lagoon samples using solid-phase extraction, pentafluorobenzyl/trimethylsilyl derivatizations and gas chromatography-negative ion chemical ionization tandem mass spectrometry

A method was developed for the confirmed identification and quantitation of 17beta-estradiol, estrone, 17alpha-ethynylestradiol and 16alpha-hydroxy-17beta-estradiol (estriol) in ground water and swine lagoon samples. Centrifuged and filtered samples were extracted using solid-phase extraction (SPE), and extracts were derivatized using pentafluorobenzy] bromide (PFBBR) and N-trimethylsilylimidazole (TMSI). Analysis was done using negative ion chemical ionization (NICI) gas chromatography-mass spectrometry-mass spectrometry (GC-MS-MS). Deuterated analogs of each of the estrogens were used as isotope dilution standards (IDS) and were added to the samples before extraction. A limit of quantitation of 1 ng/l in ground water was obtained using 500 ml of ground water sample, 1.0 ml of extract volume and the lowest calibration standard of 0.5 pg/microl. For a 25 ml swine lagoon sample, the limit of quantitation was 40 ng/l. The average recovery of the four estrogens spiked into 500 ml of distilled water and ground water samples (n = 16) at 2 ng/l was 103% (S.D. 14%). For 25 ml of swine lagoon samples spiked at 500, 1000 and 10,000 ng/l, the average recovery for the four estrogens was 103% (S.D. 15%). The method detection limits (MDLs) of the four estrogens spiked at 2 ng/l in a 500 ml of ground water sample ranged from 0.2 to 0.6 ng/l. In swine lagoon samples from three different types of swine operations, estrone was found at levels up to 25,000 ng/l, followed by estriol and estradiol up to levels at 10,000 and 3000 ng/l, respectively. It was found that pretreatment of swine lagoon samples with formaldehyde was necessary to prevent conversion of estradiol to estrone.     

Quality control in quantification of volatile organic compounds analysed by thermal desorption-gas chromatography-mass spectrometry

This paper presents a detailed study on the calibration of a thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS)-based methodology for quantification of volatile organic compounds (VOCs) in gaseous and liquid samples. For the first time, it is documented to what extent three widely encountered problems affect precise and accurate quantification, and solutions to improve calibration are proposed. The first issue deals with the limited precision in MS quantification, as exemplified by high relative standard deviations (up to 40%, n=5) on response factors of a set of 69 selected VOCs in a volatility range from 16 Pa to 85 kPa at 298 K. The addition of [(2)H(8)]toluene as an internal standard, in gaseous or liquid phase, improves this imprecision by a factor of 5. Second, the matrix in which the standard is dissolved is shown to be highly important towards calibration. Quantification of gaseous VOCs loaded on a sorbent tube using response factors obtained with liquid standards results in systematic deviations of 40-80%. Relative response factors determined by the analysis of sorbent tubes loaded with both analytes and [(2)H(8)]toluene from liquid phase are shown to offer a reliable alternative for quantification of airborne VOCs, without need for expensive and often hardly available gaseous standards. Third, a strategy is proposed involving the determination of a relative response factor being representative for a group of analytes with similar functionalities and electron impact fragmentation patterns. This group method approach indicates to be useful (RSD approximately 10%) for quantifying analytes belonging to that class but having no standards available.     

Multi‐residue method for the analysis of pharmaceutical compounds in sewage sludge,compost and sediments by sonication‐assisted extraction and LC determination

A method for the simultaneous determination of 16 pharmaceutical compounds in three types of sewage sludge (primary, secondary and anaerobically digested dehydrated sludge), compost and sediment samples is described. Pharmaceutical compounds evaluated were nonsteroidal anti‐inflammatory drugs (acetaminophen, diclofenac, ibuprofen, ketoprofen, naproxen and salicylic acid), antibiotics (sulfamethoxazole and trimethoprim), an anti‐epileptic drug (carbamazepine), a β‐blocker (propranolol), a nervous stimulant (caffeine), estrogens (17α‐ethinylestradiol, 17β‐estradiol, estriol and estrone) and lipid regulators (clofibric acid, metabolite of clofibrate and gemfibrozil). The method is based on the ultrasonic‐assisted extraction, clean‐up by SPE and analytical determination by HPLC with diode array and fluorescence detectors. The best extraction recoveries were achieved in a three‐step extraction procedure with methanol and acetone as extraction solvents. Extraction recoveries of several pharmaceutical compounds as caffeine were highly dependent on the type of sample evaluated. The applicability of the method was tested by analyzing primary, secondary and anaerobically digested dehydrated sludge, compost and sediment samples from Seville (Southern Spain). Ten of the sixteen pharmaceutical compounds were detected in sludge samples and five in compost and sediment samples. The highest concentration levels were recorded for ibuprofen in sewage samples, whereas salicylic acid and 17α‐ethinylestradiol were detected in all of the samples analyzed.     

Carbenerhodium complexes of the half-sandwich-type: synthesis, substitution, and addition reactions

A series of carbenerhodium(I) complexes of the general composition [(eta5-C5H5)Rh(=CRR')(L)] (2a-2i) with R = R'= aryl and L = SbiPr3 or PR3 has been prepared from the square-planar precursors trans-[RhCl(=CRR')(L)2] and NaC5H5 in excellent yields. Reaction of the triisopropylsibane derivative 2a. which contains a rather labile Rh-Sb bond, with CO, PMe3, and CNR (R = Me, CH2Ph, tBu) leads to the displacement of the SbiPr3 ligand and affords the substitution products [(eta5-C5H5)Rh(=CPh2)(L)] (3-7). In contrast, treatment of the triisopropylphosphane compound 2c with CO and CNtBu leads to the cleavage of the Rh=CPh2 bond and gives besides [(eta5-C5H5)Rh(PiPr3)(L)] (10, 12) by metal-assisted C-C coupling diphenylketene Ph2C=C=O (11) or the corresponding imine Ph2C=C=NtBu (13). While the reaction of 2a, c with C2H4 yields [(eta5-C5H5)Rh(C2H4)(L)] (14, 15) and the trisubstituted olefin Ph2C=CHCH3 (16), treatment of 2a, c with RN3 leads to the cleavage of both the Rh-EiPr3 and Rh=CPh2 bonds and gives the chelate complexes [(eta5-C5H5)Rh(kappa2-RNNNNR)] (19, 20). The substitution products 3 (L=CO) and 4 (L= PMe3) react with an equimolar amount of sulfur or selenium by addition of the chalcogen to the Rh=CPh2 bond to generate the complexes [(eta5-C5H5)Rh(kappa2-ECPh2)(L)] (21-24) with thio- or selenobenzophenone as ligand. Similarly, treatment of 3 with CuCl affords the unusual 1:2 adduct [(eta5-C5H5)(CO)Rh(mu-CPh2)(CuCl)2] (25), which reacts with NaC5H5 to form [(eta5-C5H5)(CO)Rh(muCPh2)Cu(eta5-C5H5)] (26). The molecular structures of 3 and 22 have been determined by X-ray crystallography.     

Effects of Pt...Pt bonding, anions, solvate molecules, and hydrogen bonding on the self-association of Chugaev's cation, a platinum complex with a chelating carbene ligand

Five salts, [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)](BPh(4)).CH(3)OH, [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)](PF(6)).CH(2)Cl(2), [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.4H(2)O, [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Br.3.5H(2)O, and [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.0.1H(2)O, have been crystallized and examined by single crystal X-ray diffraction. While the internal structure of the cation is similar in all salts, the interactions between cations vary in the different salts. Yellow [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)](BPh(4)).CH(3)OH and red [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)](PF(6)) form face-to-face dimers with Pt...Pt separations of 3.6617(6) and 3.340(2) A, respectively. In the latter, hydrogen bonding of the chelating ligand to adjacent anions facilitates the close approach of pairs of cations. The salts [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.4H(2)O, [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Br.3.5H(2)O, and [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.0.1H(2)O form columnar structures with Pt...Pt separations that range from 3.2514(5) to 3.5643(6) A. The water molecules and anions surround these columns and form bridges between neighboring columns. The electronic spectra of aqueous solutions of [(C(4)H(9)N(4))Pt(II)(CNCH(3))(2)]Cl.4H(2)O show spectral changes upon increasing concentrations of the platinum complex that are indicative of the formation of a dimer in solution with an equilibrium constant for dimerization of 23(1).     

Synthesis, characterization, and DNA-binding and -photocleavage properties of water-soluble lanthanide porphyrinate complexes

A series of cationic lanthanide porphyrinate complexes of the general formula [(Por)Ln(H(2)O)(3)](+) (Ln(3+)=Yb(3+) and Er(3+)) were synthesized in moderate yields through the interaction of meso-pyridyl-substituted porphyrin free bases (H(2)Por) with [Ln{N(SiMe(3))(2)}(3)]·x[LiCl(thf)(3)], and the corresponding neutral derivatives [(Por)Ln(L(OMe))] (L(OMe)(-)=[(η(5)-C(5)H(5))Co{P(=O)(OMe)(2)}(3)](-)) were also prepared from [(Por)Ln(H(2)O)(3)](+) by the addition of the tripodal anion, L(OMe)(-), an effective encapsulating agent for lanthanide ions. Furthermore, the water-soluble lanthanide(III) porphyrinate complexes--including [(cis-DMPyDPP)Yb(H(2)O)(3)]Cl(3) (cis-DMPyDPP=5,10-bis(N-methylpyridinium-4'-y1)-15,20-di(phenyl)porphyrin), [(trans-DMPyDPP)Yb(H(2)O)(3)]Cl(3) (trans-DMPyDPP=5,15-bis(N-methylpyridinium-4'-y1)-10,20-di(phenyl)porphyrin), [(TMPyP)Yb(L(OMe))]I(4), and [(TMPyP)Er(L(OMe))]I(4) (TMPyP=tetrakis(N-methylpyridinium-4-y1)porphyrin)--were obtained by methylation of the corresponding complexes with methyl iodide and unambiguously characterized. The binding interactions and photocleavage activities of the water-soluble lanthanide(III) porphyrinate complexes towards DNA were investigated by UV-visible, fluorescence, and near-infrared luminescence spectroscopy, as well as circular dichroism and gel electrophoresis.     

A systematic investigation to optimize simultaneous extraction and liquid chromatography tandem mass spectrometry analysis of estrogens and their conjugated metabolites in milk

In this study, the simultaneous extraction of estrone (E1), 17β-estradiol (E2), estriol (E3), ethinylestradiol (EE2), and their glucuronated and sulfated metabolites in milk was optimized using solid-phase extraction (SPE). The aim of this research was to analyze estrogens and their conjugated metabolites by liquid chromatography with tandem mass spectrometry (LC–MS/MS) in a single run, without the need to perform enzymatic cleavage and derivatization. Two SPE cartridges in tandem were used, consisting of sorbents based on the hydrophilic–lipophilic balance and amine-functionalized packing materials. To monitor analyte loss at every step of the SPE procedure ¹⁴C-labeled E2 was spiked into the milk sample and the radioactivity was monitored at all stages of the SPE. In addition, non-radiolabeled standards of estrogens and metabolites were used to optimize solvent systems for the SPE and LC–MS/MS. The optimized method described in this paper can achieve recoveries ranging from 72% to 117% for the free estrogens (E1, E2, E3, and EE2), and 62% to 112% for seven conjugated metabolites. The three doubly conjugated, highly polar metabolites included in this study gave lower recoveries (≤43%) due to poor retention in SPE. Finally, commercial milk samples were analyzed for the presence of estrogens and their conjugated metabolites. Estrone (concentration range: 23–67 ng/L) was found to be the major free estrogen present in all milk samples. Estradiol was consistently observed in milk, but the concentrations were below the limit of detection (LOD of 10 ng/L), and no estriol and ethinylestradiol were detected. Several conjugated estrogen metabolites were identified, 17β-estradiol-3-glucuronide (71–289 ng/L), estrone-3-sulfate (60–240 ng/L), 17β-estradiol-3,17β-sulfate (<LOD to 30 ng/L), and estrone-3-glucuronide (<LOQ of 25 ng/L). This method proved efficient in the simultaneous analysis of estrogens and their metabolites in milk.     

Solution and solid-state structure of the anion [Ag(2)[closo-CB(11)H(12)](4)](2-)

Addition of the carbene 1,3-dimesitylimidazol-2-ylidene (IMes) to a toluene solution of Ag[closo-CB(11)H(12)] results in the formation of the complex [(IMes)(2)Ag](2)[Ag(2)[closo-CB(11)H(12)](4)], the anionic component of which contains two silver(I) centers bridged by two carboranes in addition to one terminally bound carborane on each metal, in the solid-state. Comparison of the observed (11)B[(1)H] NMR chemical shifts of [(IMes)(2)Ag](2)[Ag(2)[closo-CB(11)H(12)](4)] or Ag[closo-CB(11)H(12)] with [NBu(4)][closo-CB(11)H(12)] in CD(2)Cl(2) demonstrates that the silver ion interacts significantly with the cage in solution. Theoretical investigations using the ab initio/GIAO/NMR method of [closo-CB(11)H(12)](-) and Na[closo-CB(11)H(12)] as model geometries for the silver salts support experimental evidence for these Ag...[BH] interactions in solution.     

Enantioselective separation of racemic juvenile hormone III by normal-phase high-performance liquid chromatography and preparation of [(2)H(3)]juvenile hormone III as an internal standard for liquid chromatography-mass spectrometry quantification

Juvenile hormone III (JH III) racemate was prepared from methyl (2E,6E)-farnesoate via epoxidation with 3-chloroperbenzoic acid (mCPBA). Enantioselective separation of JH III was conducted using normal-phase high-performance liquid chromatography (HPLC) on a chiral stationary phase. [(2)H(3)]Methyl (2E,6E)-farnesoate was also prepared from (2E,6E)-farnesoic acid and [(2)H(4)]methanol (methanol-d(4)) using 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC) and 4-dimethylaminopyridine (DMAP); the conjugated double bond underwent isomerization to some degree. Epoxidation of [(2)H(3)]methyl (2E,6E)-farnesoate with mCPBA gave a novel deuterium-substituted internal standard [(2)H(3)]JH III (JH III-d(3)). The standard curve was produced by linear regression using the peak area ratios of JH III and JH III-d(3) in liquid chromatography-mass spectrometry (LC-MS).     

Reversible capture of small molecules on bimetallaborane clusters: synthesis, structural characterization, and photophysical aspects

Metallaborane compounds containing two adjacent metal atoms, [(PMe(2)Ph)(4)MM'B(10)H(10)] (where MM' = Pt(2), 1; PtPd, 7; Pd(2), 8), have been synthesized, and their propensity to sequester O(2), CO, and SO(2) and to then release them under pulsed and continuous irradiation are described. Only [(PMe(2)Ph)(4)Pt(2)B(10)H(10)], 1, undergoes reversible binding of O(2) to form [(PMe(2)Ph)(4)(O(2))Pt(2)B(10)H(10)] 3, but solutions of 1, 7, and 8 all quantitatively take up CO across their metal-metal vectors to form [(PMe(2)Ph)(4)(CO)Pt(2)B(10)H(10)] 4, [(PMe(2)Ph)(4)(CO)PtPdB(10)H(10)] 10, and [(PMe(2)Ph)(4)(CO)Pd(2)B(10)H(10)] 11, respectively. Crystallographically determined interatomic M-M distances and infrared CO stretching frequencies show that the CO molecule is bound progressively more weakly in the sequence {PtPt} > {PtPd} > {PdPd}. Similarly, SO(2) forms [(PMe(2)Ph)(4)(SO(2))Pt(2)B(10)H(10)] 5, [(PMe(2)Ph)(4)(SO(2))PtPdB(10)H(10)] 12, and [(PMe(2)Ph)(4)(SO(2))Pd(2)B(10)H(10)] 13 with progressively weaker binding of the SO(2) molecule. The uptake and release of gas molecules are accompanied by changes in their absorption spectra. Nanosecond transient absorption spectroscopy clearly shows that the O(2) and CO molecules are liberated from the bimetallic binding site with high quantum yields of about 0.6. For 3, in addition to dioxygen release in the triplet ground state, singlet oxygen O(2)((1)Δ(g)) was also detected with a quantum yield <0.01. In most cases, the release and rebinding of the gas molecules can be cycled with little photodegradation of the compounds. Femtosecond transient absorption spectroscopy further reveals that the photorelease of the O(2) and CO molecules, from 3 and 4 respectively, is an ultrafast process taking place on a time scale of tens of picoseconds. For SO(2), the release is even faster (<1 ps), but only in the case of mixed metal PtPd adducts, most probably because of the metal-metal bonding asymmetry in the mixed metal clusters; for the corresponding symmetric Pt(2) and Pd(2) adducts, 5 and 13, the release of SO(2) is significantly slower (>1 ns). All these compounds may have potential to serve as light-triggered local and instantaneous sources of the studied gases.     

Cycloheptatrienyl zirconium sandwich complexes with lewis basic phospholyl ligands (phosphatrozircenes): synthesis, structure, bonding and coordination chemistry

The transmetalation reaction between [(η(7) -C(7) H(7) )ZrCl(tmeda)] (1; tmeda=N,N,N',N'-tetramethylethylenediamine) and various phospholide anions leads to a new class of mixed sandwich complexes: [(η(7)-C(7)H(7))Zr(η(5)-C(4)PMe(4))] (2), [(η(7)-C(7)H(7))Zr(η(5)-C(4)PH(2)Me(2))] (3) and [(η(7)-C(7)H(7))Zr(η(5)-C(4)PPhHMe(2))] (4). The presence of Lewis basic phosphorus atoms and Lewis acidic zirconium atoms allows ambiphilic behaviour to be observed, and X-ray diffraction analysis reveals dimeric arrangements for 2 and 3 with long intermolecular Zr-P bonds, whereas 4 remains monomeric in the solid state. DFT calculations indicate that the metal-phosphorus interaction is weak, and accordingly, complexes 2-4 act as monodentate ligands upon reaction with [W(CO)(5)(thf)]. The resulting complexes [W(CO)(5)(L)] 5-7 (L=2-4) were studied by IR spectroscopy and compared with the [W(CO)(5) ] complex 9, containing the phosphane-functionalised trozircene [(η(7)-C(7)H(7))Zr(η(5)-C(5)H(4)PPh(2))] (8). They all show a close resemblance to simple phosphanes, such as PMe(3) , although molecular orbital analysis of 2 reveals that the free electron pair in the phosphatrozircenes is not the HOMO. Four equivalents of 2 can replace 1,4-cyclooctadiene (COD) in [Ni(cod)(2)] to form the homoleptic, distorted tetrahedral complex [Ni{2}(4)] (10).     

Dinitrogen functionalization with terminal alkynes, amines, and hydrazines promoted by [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2): observation of side-on and end-on diazenido complexes in the reduction of N2 to hydrazine

Functionalization of the N2 ligand in the side-on bound dinitrogen complex, [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2), has been accomplished by addition of terminal alkynes to furnish acetylide zirconocene diazenido complexes, [(eta5-C5Me4H)2Zr(C[triple bond]CR)]2(mu2,eta2,eta2-N2H2) (R = nBu, tBu, Ph). Characterization of [(eta5-C5Me4H)2Zr(C[triple bond]CCMe3)]2(mu2,eta2,eta2-N2H2) by X-ray diffraction revealed a side-on bound diazenido ligand in the solid state, while variable-temperature 1H and 15N NMR studies established rapid interconversion between eta1,eta1 and eta2,eta2 hapticity of the [N2H2]2- ligand in solution. Synthesis of alkyl, halide, and triflato zirconocene diazenido complexes, [(eta5-C5Me4H)2ZrX]2(mu2,eta1,eta1-N2H2) (X = Cl, I, OTf, CH2Ph, CH2SiMe3), afforded eta1,eta1 coordination of the [N2H2]2- fragment both in the solid state and in solution, demonstrating that sterically demanding, in some cases pi-donating, ligands can overcome the electronically preferred side-on bonding mode. Unlike [(eta5-C5Me4H)2ZrH]2(mu2,eta2,eta2-N2H2), the acetylide and alkyl zirconocene diazenido complexes are thermally robust, resisting alpha-migration and N2 cleavage up to temperatures of 115 degrees C. Dinitrogen functionalization with [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) was also accomplished by addition of proton donors. Weak Br?nsted acids such as water and ethanol yield hydrazine and (eta5-C5Me4H)2Zr(OH)2 and (eta5-C5Me4H)2Zr(OEt)2, respectively. Treatment of [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) with HNMe2 or H2NNMe2 furnished amido or hydrazido zirconocene diazenido complexes that ultimately produce hydrazine upon protonation with ethanol. These results contrast previous observations with [(eta5-C5Me5)2Zr(eta1-N2)]2(mu2,eta1,eta1-N2) where loss of free dinitrogen is observed upon treatment with weak acids. These studies highlight the importance of cyclopentadienyl substituents on transformations involving coordinated dinitrogen.     

Molybdenocene trihydride complexes: influence of a [Me2Si] ansa bridge on classical versus nonclassical nature, stability with respect to elimination of dihydrogen, and acidity

Experimental and computational studies on a series of cationic molybdenocene trihydride complexes, namely [Cp(2)MoH(3)]+, [(Cp(Bu)t)(2)MoH(3)]+, [Cp(2)MoH(3)]+, and ([Me(2)Si(C(5)Me(4))(2)]MoH(3))+, demonstrate that the most stable form for the ansa molybdenocene derivative is a nonclassical dihydrogen-hydride isomer, ([Me(2)Si(C(5)Me(4))(2)]Mo(eta(2)-H(2))(H))+, whereas the stable forms for the non-ansa complexes are classical trihydrides, [Cp(2)Mo(H)(3)]+, [(Cp(Bu)t)(2)Mo(H)(3)]+, and [Cp(2)Mo(H)(3)]+. In addition to altering the classical versus nonclassical nature of [Cp(2)MoH(3)]+ and ([Me(2)Si(C(5)Me(4))(2)]Mo(eta(2)-H(2))(H))+, the [Me(2)Si] ansa bridge also markedly influences the stability of the complex with respect to elimination of H(2) and dissociation of H+. Finally, computational studies on ([H(2)Si(C(5)H(4))(2)]MoH(2)D)+ and ([H(2)Si(C(5)H(4))(2)]MoHD(2))+ establish that deuterium exhibits a greater preference than hydrogen to occupy dihydrogen versus hydride sites.     

Synthesis, structure, and reactivity of palladacycles that contain a chiral rhenium fragment in the backbone: New cyclometalation and catalyst design strategies

The bromocyclopentadienyl complex [(eta5-C5H4Br)Re(CO)3] is converted to racemic [(eta5-C5H4Br)Re(NO)(PPh3)(CH2PPh2)] (1 b) similarly to a published sequence for cyclopentadienyl analogues. Treatment of enantiopure (S)-[(eta5-C5H5)Re(NO)(PPh3)(CH3)] with nBuLi and I2 gives (S)-[(eta5-C5H4I)Re(NO)(PPh3)(CH3)] ((S)-6 c; 84 %), which is converted (Ph3C+ PF6 -, PPh2H, tBuOK) to (S)-[(eta5-C5H4I)Re(NO)(PPh3)(CH2PPh2)] ((S)-1 c). Reactions of 1 b and (S)-1 c with Pd[P(tBu)3]2 yield [{(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(mu-X)}2] (10; X = b, Br, rac/meso, 88 %; c, I, S,S, 22 %). Addition of PPh3 to 10 b gives [(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(PPh3)(Br)] (11 b; 92 %). Reaction of (S)-[(eta5-C5H5)Re(NO)(PPh3)(CH2PPh2)] ((S)-2) and Pd(OAc)(2) (1.5 equiv; toluene, RT) affords the novel Pd3(OAc)4-based palladacycle (S,S)-[(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(mu-OAc)2Pd(mu-OAc)2Pd(mu-PPh2CH2)(Ph3P)(ON)Re(eta5-C5H4)] ((S,S)-13; 71-90 %). Addition of LiCl and LiBr yields (S,S)-10 a,b (73 %), and Na(acac-F6) gives (S)-[(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(acac-F6)] ((S)-16, 72 %). Reaction of (S,S)-10 b and pyridine affords (S)-[(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(NC5H5)(Br)] ((S)-17 b, 72 %); other Lewis bases yield similar adducts. Reaction of (S)-2 and Pd(OAc)2 (0.5 equiv; benzene, 80 degrees C) gives the spiropalladacycle trans-(S,S)-[{(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)}2Pd] (39 %). The crystal structures of (S)-6 c, 11 b, (S,S)- and (R,R)-132 C7H8, (S,S)-10 b, and (S)-17 b aid the preceding assignments. Both 10 b (racemic or S,S) and (S)-16 are excellent catalyst precursors for Suzuki and Heck couplings.