Synthesis of <Emphasis Type="Italic">N</Emphasis>-and <Emphasis Type="Italic">C</Emphasis>-trimethylsilyl-substituded anililes

N-Metallation of bromoanilines with ethylmagnesium bromide followed by a reaction with trimethylchlorosilane provided N-mono and N-bis(trimethylsilyl)bromoanilines depending on the structure of substrate. The metallation of bissilylated bromoanilines with butyllithium permitted the introduction of a trimethylsilyl substituent in the aromatic ring. Previously unknown 2-bromo-N,N-bis(trimethylsilyl)aniline, 2,6-dibromo-N-trimethylsilylaniline, 2,6-dibromo-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilylaniline, 2-bromo-6-trimethylsilyl-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilyl-N-trimethylsilylaniline, 2,4,6-tribromo-N-trimethylsilylaniline, and 2,4,6-tribromo-N,N-bis(trimethylsilyl)aniline were prepared. The structures of the compounds obtained were established by the chromato-mass spectrometry and ¹H, ¹³C, and ²⁹Si NMR spectroscopy.     

Synthesis and Luminescence of Eu‐N2,N6‐Bis(2‐hydroxyethyl)pyridine‐2,6‐dicarboxamide Complexes Containing Mesoporous Material

Ligand N²,N⁶‐bis(2‐hydroxyethyl)pyridine‐2,6‐dicarboxamide (L=BHPC) was synthesized and used to construct lanthanide‐based mesoporous material Eu‐L‐MCM‐41. In the structure of resulting Eu‐L‐MCM‐41, Eu³⁺ was chelated by BHPC, and the Eu‐L complexes were anchored into the forming MCM‐41 host by the reaction between the hydroxyl group and active Si‐OH. The mesoporous material Eu‐L‐MCM‐41 was characterized by UV, IR, small‐angle X‐ray diffraction (SAXRD) patterns, nitrogen adsorption/desorption isotherms, TGA and fluorescence spectra. The results indicate that ligand and Eu³⁺ have been introduced into the MCM‐41 host, and Eu‐L‐MCM‐41 exhibits characteristic luminescence of Eu³⁺.     

Investigation of environmental and concentration effects on fluorescence properties of AlQ<Subscript>3</Subscript> using mesoporous silica and polyacrylate

In this work, for the first time, control over the position of maximum emission peak for fluorophore, using embedded tris(8-hydroxyquinoline) aluminum (AlQ₃) complexes into different types of host materials, can be achieved. Moreover, the environmental and concentration effects on luminescent properties were studied. In this regard, different concentrations of AlQ₃ were embedded into the poly(methyl methacrylate-co-butyl acrylate) (PMMA-co-PBuA) nanoparticles as organic host materials by emulsion polymerization. It is established that the dilution of AlQ₃ in the polymer matrix leads to blue-shift of the luminescence maximum up to 0.32 eV compared to pure AlQ₃. Moreover, AlQ₃ was embedded in SBA-15 type mesoporous silica as an inorganic host material by physical adsorption. Finally, this functionalized mesoporous silica was incorporated into PMMA-co-PBuA transparent matrix by blending method to obtain Co-Poly-AlQ₃-SBA-15 as organic–inorganic composite material. It was found that there is no significant wavelength shift on the maximum emission peak of the organic–inorganic composite at various concentrations of AlQ₃-SBA-15. The prepared materials were characterized by powder X-ray diffraction (XRD), N₂ adsorption–desorption, NMR, Fourier transform infrared (FT-IR), dynamic light scattering (DLS), scanning electron microscopy (SEM) and fluorescence spectra.     

Synthesis,structural and spectroscopic properties of asymmetric Schiff bases derived from 2,3-diaminopyridine

Two Schiff base derivatives, 4-(2-amino-3-pyridyliminomethyl)phenol (I) and 3-(2-amino-3-pyridyliminomethyl)nitrobenzene (II), were synthesised and characterised by spectroscopy. The structure of I was determined by single crystal X-ray diffraction studies. The asymmetric Schiff base derived from 2,3-diaminopyridine selectively recognise transition and heavy metal cations, and some anion. Ligands I and II form stable complexes with Cu²⁺, Zn²⁺, Pb²⁺, Al³⁺ whereas ligand I also binds F~ ions. The stoichiometry for the host: cation is 1: 1 and 2: 1. The addition of F~ ion in CH₃CN to ligand I causes a colour change of the solution from colourless to yellow. The binding behaviour of ligand I towards several ions was investigated using density functional theory calculations.     

Mononuclear and heterodinuclear phenanthrolinedione complexes of <Emphasis Type="Italic">d</Emphasis>- and <Emphasis Type="Italic">f</Emphasis>-block elements

1,10-Phenanthroline-5,6-dione (Phd) complexes of group 3 and lanthanide elements having formulae Ln(hfac)₃(Phd) (Ln = Y, Eu, Yb; hfac = hexafluoroacetylacetonate) were synthesised and characterised. Complexes of d-block elements of the type [MCl(Phd)(p-cymene)]⁺ (M = Ru, Os) were also prepared. In all these species, coordination of the polydentate ligand occurs by the N-donor moieties, as indicated by DFT calculations. The novel compounds were tested, together with fac-ReBr(Phd)(CO)₃, as precursors for the preparation of heterobimetallic d/f derivatives. The reaction of the rhenium complex with yttrium or lanthanide anhydrous triflate salts led to the formation of the complexes ReBr(CO)₃(N,N′-Phd-O,O′)Ln(OTf)₃(THF) (Ln = Y, Eu, Yb), where the trivalent ions interacted with the quinonoid moiety. The redox properties of the rhenium centre were strongly affected by the coordination of Ln(OTf)₃, as observed by comparing the cyclic voltammetry measurements carried out on fac-ReBr(Phd)(CO)₃ and on ReBr(CO)₃(N,N′-Phd-O,O′)Y(OTf)₃.     

Rare-earth metal dichloride and bis(alkyl) complexes containing amidinate-amidopyridinate ligands: synthesis,structure, and reactivity

A reaction of anhydrous yttrium chloride with an equimolar amount of lithium amidinateamidopyridinate obtained in situ by metallation of N,N’-bis(2,6-dimethylphenyl)-N-{6-[(2,6-dimethylphenyl)amino]pyridin-2-yl}acetimidamide ((2,6-Me₂C₆H₃)NH(2,6-C₆H₃N)N(2,6-Me₂C₆H₃)C(Me)=N(2,6-Me₂C₆H₃), L¹H) (1) with n-butyllithium in THF at–70 °C was used to synthesize the yttrium dichloride complex (L¹)YCl₂(THF)₂ (2). The lutetium bis(alkyl) complex, namely, N’-(2,6-diisopropylphenyl)-N-(2,6-dimethylphenyl-N-{6-[(2,6-dimethylphenyl)amido]pyridin-2-yl}acetimidoamidinatebis(trimethylsilylmethyl)lutetium (4), was obtained by the reaction of N’-(2,6-diisopropylphenyl)-N-(2,6-dimethylphenyl)-N-(6-((2,6dimethylphenyl)amino)pyridin-2-yl)acetimidamide ((2,6-Me₂C₆H₃)NH(2,6-C₆H₃N)N-(2,6-Me₂C₆H₃)C(Me)=N(2,6-Pr ₂ ⁱ C₆H₃), L²H (3)) with an equimolar amount of Lu(CH₂SiMe₃)₃(THF)₂. Complex 4 was found to be very stable and did not show indications of C—H-activation and other kinds of disintegration in benzene or toluene solution even upon prolonged heating at 60 °C. The reaction of complex 4 with an equimolar amount of 2,6-diisopropylaniline in toluene solution at room temperature led to the formation of the lutetium alkyl-anilide complex (L²)Lu(CH₂SiMe₃)(NH-2,6-Pr ₂ ⁱ C₆H₃) (5). A three-component system 4—AlBu ₃ ⁱ —[X][B(C₆F₅)₄] ([X] = [Ph₃C], [PhNHMe₂], the molar ratio of 1: 10: 1) was found to catalyze polymerization of isoprene.     

Thermodynamic properties of lanthanum and lanthanide halides: III. Thermodynamic functions of LnF<Subscript>2</Subscript> (gas)

The molecular constants of LnF₂ (Ln = La-Lu) have been estimated based on the available spectro-scopic characteristics of lanthanum and lanthanide difluorides. These constants have been used for calculating the reduced Gibbs energy ?[G ⁰(T) ? H ⁰(0)]/T of the compounds in the ideal gas state in the range 298.15–3000 K at the standard pressure p ⁰ = 0.1 MPa. The electronic contribution to thermodynamic functions has been calculated taking into account the excitation energies of low-lying (<10 000 cm^?1) electronic states of Ln²⁺ ions. The splitting of the ground state term of Ln²⁺ in the ligand field is estimated.     

Activated sterically strained C=N bond in <Emphasis Type="Italic">N</Emphasis>-substituted <Emphasis Type="Italic">p</Emphasis>-quinone mono- and diimines: XV. Synthesis,structure, and reactions with alcohols of <Emphasis Type="Italic">N</Emphasis>-carbamoyl-1,4-benzoquinone imines

The reaction of 4-aminophenols with N-nitrourea or with sodium cyanate in acetic acid gave the corresponding 4-ureidophenols which were oxidized to N-carbamoyl-1,4-benzoquinone imines, substituted N-(4-oxocyclohexa-2,5-dien-1-ylidene)ureas. N-(2,6-Dimethyl-4-oxocyclohexa-2,5-dien-1-ylidene)urea possessing activated sterically strained C=N bond reacted with alcohols to afford N-(1-alkoxy-2,6-dimethyl-4-oxocyclohexa-2,5-dienyl)ureas.     

Solubility enhancement of phenanthrene using novel chelating surfactant

A novel chelating surfactant denoted as sodium N-lauroyl ethylenediamine triacetate (N-LED3A) with both surface activity and chelation functions was studied for phenanthrene (PHE) solubilisation ability. The critical micelle concentration (CMC) of N-LED3A was measured, and the effects of the initial N-LED3A concentration, temperature, pH value and coexisting ions (Na⁺, Ca²⁺ and Cu²⁺) on PHE solubilisation by N-LED3A were investigated. The results demonstrated that PHE solubility was efficiently enhanced by N-LED3A, especially with N-LED3A concentrations above the CMC, which was 707 mg L^?1 when measured at 25°C. The temperature influenced the apparent PHE solubility slightly and the apparent solubility of PHE was significantly affected by the pH. Na and Ca were shown to increase the PHE solubility, while Ca exhibited a better promoting ability than Na⁺. A suitable quantity of Cu could significantly enhance the solubilisation capacities of N-LED3A at pH 5. The mechanism of the interaction between Cu⁺ and N-LED3A was further confirmed by Fourier transform infrared spectroscopy (FTIR). These results reveal that Cu²⁺ can be chelated with N-LED3A to form a chelate complex. The results implied that N-LED3A had the potential to remediate soils contaminated by both organics and heavy metals.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-aryl-2-methyl-4-oxo-3,4,5,6-tetrahydro-2<Emphasis Type="Italic">H</Emphasis>-2,6-methano-1,3,5-benzoxadiazocine-11-carboxamides

N-Aryl-2-methyl-4-oxo-3,4,5,6-tetrahydro-2H-2,6-methano-1,3,5-benzoxadiazocine-11-carboxamides were synthesized by three-component reactions of N-aryl-3-oxobutanamides with salicylaldehyde and urea in ethanol in the presence of NaHSO₄ as catalyst. The product structure was determined by IR and ¹H NMR spectroscopy and X-ray analysis.     

Crystal structure,DFT study,antimicrobial properties and DNA cleavage potential and thermal behavior of some new mercury complexes

In this study, a new bidentate Schiff base ligand (L) entitled as N,N’-bis(dimethylaminocinnamaldehyde)-2,2-dimethyl-1,3-propanediamine and its mercury complexes were synthesized. The Schiff base ligand and its complexes were characterized using FT-IR, ¹H-, ¹³C-NMR spectroscopy, molar conductivity and electronic spectral study. Regarding physical and spectral data, the general formula for the complexes was suggested as HgLX₂ (L = Schiff base ligand and X = Cl^?, Br^?, I^?, SCN^?, N₃ ^?). For structural identification of these complexes, crystal structure of mercury iodide complex was analyzed as typical one. In the structure of this complex, Hg ion is surrounded by 2 iodide ions and 2 N atoms from the Schiff base ligand to form a four-coordinated mercury complex in triclinic system with space group of P ₁. Angular index (τ ₄) value was evaluated equal to 0.85, so the geometry around the mercury ion in this complex can be described as trigonal pyramid. A layered supramolecular structure for HgLI₂ complex is stabilized by C–H···I and C–H···π interactions in solid state. DFT study on the ligand and its complexes was also carried out, and then some calculated and experimental structural parameters of HgLI₂ were compared. Thermal behaviors of the titled compounds were investigated by thermogravimetric analyses. Furthermore, biological properties of the ligand and its complexes were examined against some Gram-negative and Gram-positive bacteria and also against 2 fungi. Finally, the interaction of the ligand and its complexes with DNA was investigated by electrophoresis method.     

Synthesis,crystal structure,and fluorescence properties of a two-dimensional copper(II) complex with Schiff base

A new Schiff base ligand C₁₉H₁₃NO₅(H₂L) was synthesized using 2-aminoterephthalic acid and 2-hydroxy-1-naphthaldehyde. A complex of this ligand [Cu(C₁₉H₁₁NO₅)(C₂H₆O)] _n was synthesized and characterized by IR, UV, fluorescence spectroscopy and X-ray diffraction single-crystal analysis. The crystal crystallizes in the monoclinic system, space group Pbca with a = 8.7745(18), b = 18.613(4), c = 24.644(5) Å, V = 4024.9(14) ų, Z = 8, F(000) = 1816, S = 1.009, ρ _calcd = 1.462 g cm^?3, μ = 1.122 mm^?1, the final R = 0.0477 and wR = 0.1594 for 4609 observed reflections (I > 2σ(I)). The Cu(II) is five-coordinated by one N atom and two O atoms from the Schiff base ligand and two carboxylate O atoms from another two ligands to form a distorted square-pyramidal geometry. Each ligand serves as a bridging ligand to link Cu²⁺ ions, leading to a two-dimensional coordination polymer. The fluorescence properties of the ligand and complex were also studied. The ligand shows strong fluorescence, and the fluorescence intensity is weakened after the Cu(II) complex formed.     

Syntheses,structures, and solid-state phosphorescence characteristics of <Emphasis Type="Italic">trans</Emphasis>-bis(salicylaldiminato)Pt(II) complexes bearing perpendicular <Emphasis Type="Italic">N</Emphasis>-aryl functionalities

The syntheses, structures, and solid-state emission characteristics of trans-bis(salicylaldiminato)Pt(II) complexes bearing N-aromatic functionalities are described herein. A series of Pt complexes bearing various N-phenyl (1) and N-(1-naphthyl) (2) groups on the salicylaldiminato ligands were prepared by reacting PtCl₂(CH₃CN)₂ with the corresponding N-salicylidene aromatic amines, and the trans-coordination and crystal packing of these complexes were unequivocally established based on X-ray diffraction (XRD). Complexes with 2,6-dimethylphenyl (1c), 2,6-diisopropylphenyl (1d), 1-naphthyl (2a), and 1-(2-methylnaphthyl) (2b) groups on the N atoms exhibited intense phosphorescent emission at ambient temperature in the crystalline state, while those with phenyl (1a), 2,6-dibromophenyl (1b), and 2,6-bis(N,N-dimethylamino)phenyl (1e) functionalities were either less emissive or non-emissive under the same conditions. XRD analyses identified significant intramolecular interactions between Pt and H atoms of the N-aryl functionalities in the emissive crystals of 1c, 1d, and 2a. These interactions were evidently an important factor associated with intense emission at ambient temperature.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-Aryl- and <Emphasis Type="Italic">N,N</Emphasis>-diethyl-2-methyl-3-phenyl-4-sulfanylidene-3,4,5,6-tetrahydro-2<Emphasis Type="Italic">H</Emphasis>-2,6-methano-1,3,5-benzoxadiazocine-11-carboxamides

N-Aryl- and N,N-diethyl-3-oxobutanamides reacted with salicylaldehyde and N-phenylthiourea in ethanol in the presence of sodium hydrogen sulfate as catalyst to give the corresponding N-substituted 2-methyl-3-phenyl-4-sulfanylidene-3,4,5,6-tetrahydro-2H-2,6-methano-1,3,5-benzoxadiazocine-11-carboxamides.     

Coordination compounds of CuCl<Subscript>2</Subscript> with 1-(<Emphasis Type="Italic">N</Emphasis>-heterylmethyl)silatranes

Reactions of CuCl₂ with 1-(N-indolylmethyl)and 1-(N-carbazolylmethyl)silatranes (L) afforded new complexes CuCl2?L. Quantum chemical calculations of these complexes and a Cu^II complex with 1-(N-pyrrolylmethyl)silatrane showed that the Cu atom is coordinated to both the equatorial O atom of the silatranyl group and the π-system of the ligand? heterocycle.     

<Emphasis Type="Italic">N</Emphasis>-aryl-<Emphasis Type="Italic">o</Emphasis>-iminobenzoquinones as novel regulators of radical polymerization

The effect of a number of quinoid compounds on methyl methacrylate polymerization initiated by azo-bis(isobutyronitrile) has been studied. It has been revealed that N-aryl-o-iminobenzoquinones, in contrast to o-benzoquinones, can provide radical polymerization of methyl methacrylate in controllable mode. The efficiency of the compounds as chain growth regulators has been found to depend on their composition and reaction conditions. It has been established that 4,6-di-tert-butyl-N-(2,6-diethylphenyl)-o-iminobenzoquinone and 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone under radical initiation conditions provide the synthesis of poly(methyl methacrylate) with wide-range molecular weight, retaining polydispersity indices about ~1.4–1.8 up to deep conversions.     

Synthesis and membrane-protective activity of 2,6-diisobornylphenol derivatives with <Emphasis Type="Italic">N</Emphasis>- and <Emphasis Type="Italic">O</Emphasis>-containing fragments at position 4

Two series of new amide derivatives containing 2,6-diisobornylphenol moiety were synthesized based on 3,5-diisobornyl-4-hydroxybenzoic acid and 4-butylaminomethyl-2,6-diisobornylphenol. Toxicity, membrane-protective (MP) and antioxidant (AO) activity of the obtained compounds were evaluated using red blood cells of laboratory mice as the test object. The tests demonstrated the absence of hemolytic activity for all the synthesized derivatives and the presence of high MP and AO activity under conditions of acute H₂O₂-induced oxidative stress for (3,5-diisobornyl-4-hydroxyphenyl)(morpholino)methanone and N-n-butyl-N-(3,5-diisobornyl-4-hydroxybenzyl)acetamide. A comparison of the data of the newly obtained compounds and those of described earlier 2,6-diisobornylphenol derivatives with N- and O-containing fragments at position 4 (alkoxymethyl, carboxy, and aminomethyl derivatives) led to a conclusion that the most promising for further studies of pharmacological activity are compounds containing methoxycarbonyl, methoxymethyl, ethoxymethyl, morpholinomethyl, di-n-butylaminomethyl, (azepan-1-yl)methyl, or N-acetyl-N-alkylaminomethyl function, which provide low toxicity and high MP and AO activity.     

Experimental and theoretical investigation of topological and energy characteristics of electron density in crystals of SbVo-amidophenolate complexes

Experimental and theoretical investigations of electron density in the complexes [4,6-ditert-butyl-N-(2,6-diisopropylphenyl)-1,2-amidophenolato]tricyclohexylantimony(V) (1) and [4,6-di-tert-butyl-N-(2,6-dimethylphenyl)-1,2-amidophenolato]tri-4-fluorophenylantimony(V) (2) were performed based on high-resolution X-ray diffraction data and density functional theory calculations (B3LYP/DGDZVP). The nature of chemical bonding, the energy of intraand intermolecular interactions in the crystals, and the atomic charge distribution were studied.     

Thermodynamic properties of lanthanum and lanthanide halides: IV. Enthalpies of atomization of LnCl,LnCl<Superscript>+</Superscript>, LnF,LnF<Superscript>+</Superscript>, and LnF<Subscript>2</Subscript>

The results of measurement of equilibrium constants of 30 reactions involving lanthanum and lanthanide fluorides (LnF, LnF₂, and LnF₃) and 14 reactions involving lanthanum and lanthanide monochlorides (Ln = La-Lu) have been summarized. These constants have been used for calculating the enthalpies of reactions by the second and third laws, from which the enthalpies of atomization Δ_at H ₀ ⁰ of LnCl, LnF, and LnF₂ have been determined. Comparison of the calculation results shows that the thermodynamic functions of LnCl and LnF (Ln = Ce-Yb) in which the electronic excitation contribution has been calculated from the excitation energies of Ln⁺ ions allow one to adequately determined the Δ_at H ₀ ⁰ values from experimental data. Using the trends in the change in Δ_at H ₀ ⁰ as a function of the atomic number of a lanthanide, the enthalpies of atomization of compounds for which experimental data are lacking have been estimated. The Δ_at H ₀ ⁰ values for LnCl⁺ ions have been calculated. The reliability of the Δ_at H ₀ ⁰ values for LnF⁺ ions have been assessed.     

Structural characterisation and photoluminescence of a pyridine–diimine compound

A pyridine–diimine compound N,N′-[pyridine-2,6-diyldi(E)methylylidene]bis(4-chloroaniline) is synthesised by a Schiff base condensation of 2,6-diformylpyridine with 4-chloroaniline in methanol and characterised by spectroscopic and analytical techniques. The molecular structure of the compound is determined by the single crystal X-ray diffraction study. The compound crystallizes in the monoclinic crystal system, I2/c space group with unit cell parameters a = 7.0843(12) Å, b = 6.1909(11) Å, c = 36.262(6) Å, β = 91.576(3)°, V = 1589.8(5) ų and Z = 4. There is an intermolecular hydrogen bonding in the molecule resulting in a 1D hydrogen bonding chain and these hydrogen bonding chains are linked by Cl…HC(aromatic) interactions forming a 2D network. Crystal packing of the compound is determined by Cl…HC and π–π interactions. In the fluorescence emission spectra in CH₃CN, DMF, DMSO and EtOH, the compound shows only one emission maximum.