A helical coordination polymer of zinc(II), 4‐hydroxybenzohydrazide and sulfate ions

In the structure of the novel zinc complex catena‐poly[[diaqua(4‐hydroxybenzohydrazide)zinc(II)]‐μ‐sulfato], [Zn(SO₄)(C₇H₈N₂O₂)(H₂O)₂]_n, the complex cations are linked by sulfate counter‐ions into helical polymeric chains extending along the b axis. Each helix is stabilized by six intrachain hydrogen bonds involving stronger O—H...O (1.83–2.06 Å) and weaker N—H...O (2.20–2.49 Å) interactions. The Zn^II atom displays a distorted octahedral geometry formed by the 4‐hydroxybenzohydrazide ligand, two water molecules and two SO₄²⁻ ions, which is very similar to the metal‐atom environment in a previously reported Co^II complex [Zasłona, Drożdżewski & Kubiak (2010). J. Mol. Struct. 982 , 1–8], especially the Zn—O and Zn—N bond lengths of 2.0453 (12)–2.1602 (9) and 2.1118 (12) Å, respectively.     

Di­chloro­bis­[2‐(o‐tolyl­iminio­methyl)­phenolato‐O]­zinc(II)

In the mononuclear title compound, [ZnCl₂(C₁₄H₁₃NO)₂], the Zn^II ion is located on a twofold axis of the monoclinic space group so that the whole mol­ecule has a twofold symmetry. The Zn^II ion has a tetrahedral coordination consisting of two chlorine ions and the O atoms of the ligands. The coordination angles around zinc have values between 102.89 (8) (O—Zn—O) and 115.83 (5)° (Cl—Zn—O). The Zn—O and Zn—Cl bond lengths are 1.977 (2) and 2.2401 (7) Å, respectively. There are intra‐ and intermolecular hydrogen bonds in the structure.     

Bis­[bis­(diethyl­enetri­amine)­zinc(II)] hexa­cyano­ferrate tetrahydrate

In the crystal structure of the title compound, [Zn(C₄H₁₃N₃)₂]₂[Fe(CN)₆]·4H₂O, the asymmetric unit is formed by a [Zn(dien)₂]²⁺ cation (dien = diethyl­enetri­amine, NH₂CH₂CH₂NHCH₂CH₂NH₂), water mol­ecules and half of the [Fe(CN)₆]^4? anion which is related by inversion symmetry through the Fe atom. The geometry around the Zn and Fe atoms is distorted octahedral and octahedral, respectively. Intramolecular O—H?O hydrogen bonds involving the water mol­ecules, and intermolecular O—H?N hydrogen bonds involving the water mol­ecules and the anions, result in an infinite chain. Intramolecular O—H?O and N—H?N, and intermolecular O—H?N, N—H?O and N—H?N hydrogen bonds form a three‐dimensional framework.     

Cleavage of the Fe—Fe Bond of （Me2SiSiMe2） [η^5－C5H4Fe（CO）2]2 with Na／Hg and Molecular Structure of the Ring－Opened Complex

The reaction of the rifle cyclic complex (1) with sodium amalgam in THF resulted in the expected cleavage of the Fe-Fe bond to afford his-sodium salt ( Me2SiSiMe2 ) [η^5-C5H4Fe(CO)2]2 (4). The latter was not isolated and was used directly to react with MeI, PhCH2Cl, CH3C(O)Cl, PhC(O)Cl,Cy3SnCl (Cy= cyclohexyl) or Ph3SnCl to afford corresponding ring-opened derivatives (Me2SiSiMe2) [η^5-C5H4Fe(CO)2]2 [5, R=Me; 6, R=PhCH2; 7, R=CH3C(O); 8, R=PhC(O); 9, R = Cy3Sn or 10, R = Ph3Sn ]. The crystal and molecular structures of 10 were determined by X-ray diffraction analysis. The molecule took the desired ant/ conformation around the Si-Si bond. The length of the Si--Si bond is 0.2343(3)nm, which is essentially identical to that in the cyclic structure of 1[0.2346(4) tun]. This result unambiguously demonstrates that the Si--Si bond in the cyclic structure of 1 is not subject to obvious strain.     

Extraction chromatographic separation of iron from complex liquid samples and the determination of <Superscript>55</Superscript>Fe

Summary Iron separation is described from liquid samples with a high concentration of ions that enables simple determination of ⁵⁵Fe. One of the described methods consists of iron precipitation from a large volume seawater by sodium hydroxide and/or ammonium carbonate and separation from other elements (Ca, Sr, Cu, Mg, etc.) on a TRU column with 4M HCl or 8M HNO₃. In the other procedure iron is separated directly from a mixture of seawater samples and HCl on a TRU column. In both methods, the iron recovery is almost 100%. After separation, ⁵⁵Fe is determined by counting with a liquid scintillation counter. The binding of Fe and Zn on TEVA, U/TEVA and TRU resins from seawater solutions of HCl and HNO₃depends on the type of the resin, concentration of acid and other ions. Iron and zinc can be separated from seawater on a U/TEVA column with 2M HCl.     

Tris­[(R)‐lact­amide‐κ2O,O′]­zinc(II) tetra­bromo­zincate

The title compound, tris­[(R)‐2‐hydroxy­propan­amide‐κ²O,O′]­zinc(II) tetra­bromo­zincate, [Zn(C₃H₇NO₂)₃][ZnBr₄], contains one monomeric six‐coordinate zinc complex cation and one tetrahedral [ZnBr₄]²⁻ anion. Both Zn^II atoms lie on threefold axes. Coordination in the cation occurs via the amide and hydroxy O atoms [Zn—O = 2.074 (5) and 2.073 (6) Å] and has a distorted octahedral geometry, with cis‐O—Zn—O angles in the range 76.2 (2)–109.2 (2)°. In the crystal structure, the cations and anions are linked by N—H⋯Br and O—H⋯O hydrogen bonds, generating a three‐dimensional network.     

Aqua(benzene‐1,3‐dicarboxylato)zinc(II)

The title compound, poly­[[aqua­zinc(II)]‐μ‐benzene‐1,3‐di­carboxyl­ato‐O¹:O^1′:O²], [Zn(C₈H₄O₄)(H₂O)]_n, forms a metal–organic coordination network that consists of tetrahedral Zn atoms bonded to one water mol­ecule and three carboxyl­ate groups. Isophthalate groups bridge the four‐coordinate Zn centers to generate two‐dimensional architectures in the ac plane. These planar zinc isophthalate motifs are linked by infinite C=O?H—O—H interactions along the a axis to form a chiral framework. The observed polar structural pattern originates due to the distorted tetrahedral Zn centers [O—Zn—O 100.7 (2)–136.0 (1)°] and the alignment of the water mol­ecules. Bridging isophthalate groups align to form approximate centrosymmetric motifs.     

Reactions of Hydrated Singly Charged First‐Row Transition‐Metal Ions M+(H2O)n (M=V,Cr, Mn,Fe, Co,Ni, Cu,and Zn) toward Nitric Oxide in the Gas Phase

Reactions of M⁺(H₂O)_n (M=V, Cr, Mn, Fe, Co, Ni, Cu, Zn; n≤40) with NO were studied by Fourier transform ion cyclotron resonance (FT‐ICR) mass spectrometry. Uptake of NO was observed for M=Cr, Fe, Co, Ni, Zn. The number of NO molecules taken up depends on the metal ion. For iron and zinc, NO uptake is followed by elimination of HNO and formation of the hydrated metal hydroxide, with strong size dependence. For manganese, only small HMnOH⁺(H₂O)_n?1 species, which are formed under the influence of room‐temperature black‐body radiation, react with NO. Here NO uptake competes with HNO formation, both being primary reactions. The results illustrate that, in the presence of water, transition‐metal ions are able to undergo quite particular and diverse reactions with NO. HNO is presumably formed through recombination of a proton and ³NO^? for M=Fe, Zn, preferentially for n=15–20. For manganese, the hydride in HMnOH⁺(H₂O)_n?1 is involved in HNO formation, preferentially for n≤4. The strong size dependence of the HNO formation efficiency illustrates that each molecule counts in the reactions of small ionic water clusters.     

Spectrophotometric determination of iron(III) with chrome azurol s or eriochrome cyanine r and some cationic surfactants

Sensitive spectrophotometric methods for the determination of iron(III), based on ternary complexes with a triphenylmethane reagent, chrome azurol S (CAS) or eriochrome cyanine R (ECR), and cetyltrimethylammonium (CTA) or cetylpyridinium (CP) ions, are described. For the system Fe—CAS—CTA, the molar absorptivity is 1.35 × 10⁵ l mol^-1 cm^-1 at 645 nm; for Fe—ECR—CTA it is 1.28 × 10⁵ l mol^-1 cm^-1 at 635 nm. Maximum absorbance is attained (at about pH 4) when the molar ratio (to iron) or CAS or ECR is about 20 and that of CTA or CP is 60–80. Citrate, tartrate, oxalate and EDTA interfere. Interference by metals (e.g. Be, Al, Ga, In, Sc, Zr, Th) can be eliminated by preliminary extraction of iron(III) as thiocyanate complex. The method was successfully applied to determining traces of iron in analytical-grade sodium hydroxide.     

BINUCLEAR COMPLEXES OF IRON(III) WITH SALICYLATE LIGANDS

Abstract

Binuclear iron(III) complexes with salicylate ligands, Na₂ [Fe₂ (C₇ H₄ O₃)₄ (H₂O)₂] and Na₄ [Fe₂ (C₇H₄O₃)₄ (OH)₂], crystallize out in the pH range 1–5 and pH 5.5, respectively, from solutions containing iron(III) chloride and a slightly more than two molar proportion of sodium salicylate. Infrared and Mössbauer spectral results and magnetic moment data indicate the presence of non-linear Fe—O—Fe bridge bonds. Evidently two salicylate ligands form bridges between the two iron(III) ions through phenolic oxygen. Mössbauer spectral results indicate the absence of bridging salicylate ligands in solutions of the complex prepared by mixing iron(III) chloride and two to three-fold molar excess of salicylate ions; only mononuclear complexes exist in such solutions.     

Interactive Effects of Molybdenum,Zinc and Iron on the Grain Yield,Quality, and Nodulation of Cowpea (Vigna unguiculata (L.) Walp.) in North-Western India

Micronutrient deficiency is a major constraint for the growth, yield and nutritional quality of cowpea which results in nutritional disorders in humans. Micronutrients including molybdenum (Mo), iron (Fe) and zinc (Zn) play a pivotal role in crop nutrition, and their role in different metabolic processes in crops has been highlighted. In order to increase the nutritional quality of cowpea, a field experiment was conducted for two years in which the effect of Mo along with iron (Fe) and zinc (Zn) on productivity, nitrogen and micronutrient uptake, root length and the number of nodules in cowpea cultivation was investigated. It was found that the foliar application of Fe and Zn and their interaction with Mo application through seed priming as well as soil application displayed increased yield, nutrient concentration, uptake and growth parameters which helped to enhance the nutritional quality of cowpea for consumption by the human population. The results of the above experiments revealed that among all the treatments, the soil application of Mo combined with the foliar application of 0.5% each of FeSO₄·7H₂O and ZnSO₄·7H₂O (M₂F₃ treatment) enhanced the grain and stover yield of cowpea, exhibiting maximum values of 1402 and 6104.7 kg ha⁻¹, respectively. Again, the M₂F₃ treatment resulted in higher Zn, Fe and Mo concentrations in the grain (17.07, 109.3 and 30.26 mg kg⁻¹, respectively) and stover (17.99, 132.7 and 31.22 mg kg⁻¹, respectively) of cowpea. Uptake of Zn, Fe and Mo by the grain (25.23, 153.3 and 42.46 g ha⁻¹, respectively) as well as the stover (104.2, 809.9 and 190.6 g ha⁻¹, respectively) was found to be maximum for the M₂F₃ treatment. The root length (30.5 cm), number of nodules per plant (73.0) and N uptake in grain and stover (55.39 and 46.15 kg ha⁻¹) were also higher for this treatment. Overall, soil application of Mo along with the foliar application of FeSO₄·7H₂O (0.5%) and ZnSO₄·7H₂O (0.5%) significantly improved yield outcomes, concentration, uptake, root length, nodules plant⁻¹ and N uptake of cowpea to alleviate the micronutrient deficiency.     

采用高分子自组装ZnO纳米线及其形成机理

介绍了一种能在各种晶面的硅衬底上制备垂直于衬底取向生长的ZnO纳米线阵列的新方法. 该法采用高分子络合和低温氧化烧结反应, 以聚乙烯醇(PVA)高分子材料作为自组装络合载体来控制晶体成核和生长. 首先通过PVA侧链上均匀分布的极性基团羟基(—OH)与锌盐溶液中的Zn²⁺离子发生络合作用, 然后滴加氨水调节络合溶液pH值为8.5±0.1, 使络离子Zn²⁺转变为Zn(OH)₂, 再将硅片浸入此溶液中, 从而在硅衬底表面得到较均匀的Zn(OH)₂纳米点, 随后在125 ℃左右Zn(OH)₂纳米点通过热分解转化为ZnO纳米点, 其后在420 ℃烧结过程中衬底上的ZnO纳米点在PVA高分子网络骨架对其直径的限域下逐渐取向生长成ZnO纳米线, 并且烧结初期PVA碳化形成的碳通过碳热还原ZnO为Zn, 再在氧气氛中氧化为ZnO的方式在纳米线顶端形成了催化活性点, 促进了纳米线顶端ZnO的吸收. 烧结后碳逐渐氧化被完全去除. 采用场发射扫描电镜(FE-SEM)、透射电镜(TEM, HR-TEM)和X射线衍射(XRD)对纳米线的分析结果表明, ZnO纳米线在硅衬底上分布均匀, 具有六方纤锌矿结构, 并且大多沿[0001]方向择优取向生长, 直径为20～80 nm, 长度可从0.5至几微米. 提出了聚合物控制ZnO结晶和形貌的网络骨架限域模型以解释纳米线的生长行为.     

The polyoctahedral silsesquioxane (POSS) 1,3,5,7,9,11,13,15‐octaphenylpentacyclo[9.5.1.13,9.15,15.17,13]octasiloxane (octaphenyl‐POSS)

Solvent‐free single crystals of 1,3,5,7,9,11,13,15‐octaphenylpentacyclo[9.5.1.1^3,9.1^5,15.1^7,13]octasiloxane (abbreviated as octaphenyl‐POSS), C₄₈H₄₀O₁₂Si₈, were obtained by dehydration/condensation of the tetrol Si₄O₄(Ph)₄(OH)₄. The powder pattern generated from the single‐crystal data matches well with the experimentally measured powder pattern of commercial octaphenyl‐POSS. The geometry of the centrosymmetric molecule in the crystal was compared with that in the gas phase, and had shorter Si—O bond lengths and a broader range of Si—O—Si bond angles. The average Si—O bond length [1.621 (3) Å], and Si—O—Si and O—Si—O bond angles [149 (5) and 109 (1)°, respectively] were within the same range measured previously for octaphenyl‐POSS solvates.     

Rapid determination of molar ratios in binary systems by 14 mev neutron activation analysis

The 14 MeV neutron activation analysis method was applied for the rapid and non-destructive determination of the molar ratios of iron(III) oxide and zinc oxide in zinc ferrites. Iron was detected as⁵⁶Mn produced from⁵⁶Fe by the (n, p) reaction, and zinc as the sum of the coincidence counts of the annihilation radiations of the positrons emitted from⁶³Zn and⁶⁴Cu produced from⁶⁴Zn by the (n, 2n) and (n, p) reactions respectively. The ratios of the counts of⁵⁶Mn and the sum of the coincidence counts were not linearly related to the molar ratios of iron(III) oxide and zinc oxide in zinc ferrites. However, by corrections of the mutual contributions to the counts, linear relations were obtained between the ratios of the counts and the molar ratios when the corrected sum of the coincidence counts was used as an internal standard. The experimental and theoretical slopes of the analytical lines agreed within a difference of approximately 10%. The deviations between the results of the activation analysis and those of the chemical analysis were less than 5% of the chemical results.     

Synthesis,Structures, Magnetic and Luminescent Properties of a Series of Iron(II) and Zinc(II) Coordination Frameworks with Versatile 4‐Substitued 1, 2,4‐Triazole Ligands

Three multi‐dentate 1, 2,4‐triazole derivative ligands containing different 4‐substituted groups, namely N‐1, 2,4‐triazol‐4‐yl(pyridin‐3‐yl)methylenimine (L₁), N‐1, 2,4‐triazol‐ 4‐yl(pyridin‐4‐yl)methylenimine (L₂), and 4‐(2‐pyridine)‐1, 2,4‐triazole (L₃) were used to isolate five iron(II) and zinc(II) coordination frameworks, [Zn(μ₂‐L₁)Cl₂] ( 1 ), [Zn(μ₂‐L₂)Br₂] ( 2 ), [Fe(L₁)₂(NCS)₂(H₂O)₂] ( 3 ), [Fe(L₃)₂(dca)₂(H₂O)₂] ( 4 ), and [Fe(L₃)₂(μ₂‐dca)] ( 5 ) (dca = dicyanamide anion). When different zinc(II) salts were used to react with L₁ and L₂ under solvothermal conditions, two one‐dimensional (1D) zinc(II) coordination frameworks 1 and 2 containing four‐coordinate central zinc(II) atoms were isolated. 1 is a 3D achiral supra‐molecular framework, whereas 2 is a 3D chiral supra‐molecular framework containing helical chains on a 2₁ axis. 3 is a mono‐nuclear iron(II) coordination framework containing six‐coordinate central Fe^II atoms. When L₃ was employed, mono‐nuclear iron(II) framework 4 and 1D iron(II) chain 5 could be isolated when different amounts of Nadca were introduced into the reaction system. Variable‐temperature magnetic susceptibility data of 3 – 5 were recorded in the 2–300 K temperature range indicating weak anti‐ferromagnetic interactions. The solid‐state luminescent properties of coordination polymers 1 and 2 were also investigated at room temperature.     

Mechanism of NiZn ferrite formation

The regularities in the change of character of the ferrite formation process as a function of Ni_1?xZn_xFe₂O₄ solid solution and of the degree of zinc oxide saturation of the Ni_1?xZn_xO solid solution (x = 0.14; 0.29; 0.43) are established in the temperature range 1220–1305°C. It is shown that in the reaction zone of interacting NiO, (Ni, ZnO), or ZnO with Fe₂O₃ the ferrite phase crystallizes only on iron oxide. The distribution of the Fe, Ni, and Zn concentrations over the reaction layer thickness using electron probe and X-ray spectrum analysis is obtained. The interdiffusion coefficients over the investigated temperature range calculated in the (Ni, Zn, Fe)O and ferrite phases change from (0.8 – 7.0) × 10^?9 to (1.0 – 12.0) × 10^?10 cm²/sec, respectively. The interaction of (Ni, Zn)O with Fe₂O₃ takes place by the mechanism of interaction of interdiffusion of Fe³⁺, Fe²⁺ and Ni²⁺, Zn²⁺ along with a current of Zn²⁺ ions and electrons or oxygen ions directed to the $\text{ferrite}\text{Fe}{}_2\text{O}{}_3$ interface.     

Hydrate isomerism in [Cu(en)2(H2O)1.935]2[Fe(CN)6]·4H2O

The title compound, bis[di­aqua­bis­(ethyl­enedi­amine‐κ²N,N′)copper(II)­] hexa­cyano­iron(II) tetrahydrate, [Cu(C₂H₈N₂)₂(H₂O)_1.935]₂[Fe(CN)₆]·4H₂O, was crystallized from an aqueous reaction mixture initially containing CuSO₄, K₃[Fe(CN)₆] and ethyl­enedi­amine (en) in a 3:2:6 molar ratio. Its structure is ionic and is built up of two crystallographically different cations, viz. [Cu(en)₂(H₂O)₂]²⁺ and [Cu(en)₂(H₂O)_1.87]²⁺, there being a deficiency of aqua ligands in the latter, [Fe(CN)₆]⁴⁻ anions and disordered solvent water mol­ecules. All the metal atoms lie on centres of inversion. The Cu atom is octahedrally coordinated by two chelate‐bonded en mol­ecules [mean Cu—N = 2.016 (2) Å] in the equatorial plane, and by axial aqua ligands, showing very long distances due to the Jahn–Teller effect [mean Cu—O = 2.611 (2) Å]. In one of the cations, significant underoccupation of the O‐atom site is observed, correlated with the appearance of a non‐coordinated water mol­ecule. This is interpreted as the partial contribution of a hydrate isomer. The [Fe(CN)₆]⁴⁻ anions form quite regular octahedra, with a mean Fe—C distance of 1.913 (2) Å. The dominant intermolecular interactions are cation–anion O—H⋯N hydrogen bonds and these inter­actions form layers parallel to (001).     

Direct Precipitation of Spinel-Type Zn(Fe, Ga)2O4 Solid Solutions from Aqueous Solutions at 90°C: Influence of Iron Valence of Starting Salt on Their Crystallite Growth

Spinel-type solid solutions in the whole range of compositions between ZnGa₂O₄ and ZnFe₂O₄ were directly precipitated as nanoparticles by dropping the starting mixed solutions of zinc sulfate, gallium sulfate, and either divalent iron chloride or trivalent iron nitrate into aqueous ammonia at 90°C. Direct precipitation of nanosized spinel-type Zn(Ga,Fe)O₄ solid solutions was also achieved by aging the mixed solutions in the presence of either urea or hexamethylenetetramine at 90°C except for one case (i.e., aging the solutions using trivalent iron salt in the presence of urea). With increased iron content in the spinel-type solid solution precipitates, their crystallite size decreased when trivalent iron salt was used, but increased when divalent iron salt was used. Change of lattice parameter a₀ of the spinel-type solid solutions was confirmed to follow the Vegard's Law.     

New fluorescent compounds based on zinc thiocyanate: influence of structure on spectral properties

New coordination compounds based on zinc thiocyanate, namely (acetone thiosemicarbazone‐κ²N ¹,S )bis(isothiocyanato‐κN )zinc(II) monohydrate, [Zn(NCS)₂(C₄H₉N₃S)]·H₂O, (I), and diaquatetrakis(urea‐κO )zinc(II) tetrakis(isothiocyanato‐κN )zinc(II), [Zn(CH₄N₂O)₄(H₂O)₂][Zn(NCS)₄], (II), were synthesized and studied by UV–Vis, fluorescence and IR spectroscopy. Coordination salt (II) forms a rare system composed of two different coordination units of the same metal and it is the first example of a compound with two completely different zinc coordination units, of which one contains a tetrakis(urea)zinc unit. Both (I) and (II) possess fluorescence properties and produce blue and green emissions, respectively, upon irradiation with violet light. The spectral properties were correlated with the observed molecular and supramolecular structures. The acetone thiosemicarbazone ligand of (I) exhibits (upon coordination) red shifts of bands corresponding to N=C and C=S stretching vibration frequencies, which is not typical for chelating molecules.     

μ‐Oxo‐bis{[(6‐hydroxy­methyl‐2‐pyridyl­methyl)­bis(2‐pyridyl­methyl)­amine‐κ5N,N′,N′′,N′′′,O]­iron(III)} tetrakis­(perchlorate)

The novel μ‐oxo‐diiron complex [Fe₂O(BPHPA)₂](ClO₄)₄ [BPHPA is (6‐hydroxy­methyl‐2‐pyridyl­methyl)­bis(2‐pyridyl­methyl)­amine, C₁₉H₂₀N₄O], contains a binuclear centrosymmetric [Fe₂O(BPHPA)₂]⁴⁺ cation (the bridging O atom lies on an inversion centre) and four perchlorate anions. Each iron ion is coordinated by four N atoms [Fe—N = 2.117 (5)–2.196 (5) Å] and one O atom [Fe—O = 2.052 (5) Å] from a BPHPA ligand, and by one bridging oxo atom [Fe—O = 1.7896 (9) Å], forming a distorted octahedron. There are hydrogen bonds between the hydroxy group and perchlorate O atoms [O—H·O = 2.654 (7) Å].