Determination of the activity of bacteriolytic enzymes and measurement of their sorption in the system of living cells of <Emphasis Type="Italic">Lactobacillus plantarum</Emphasis>

A turbidimetric method for determining the activity of bacteriolytic enzymes against living Lactobacillus plantarum cells as a substrate is developed. A technique for measuring the sorption of an enzyme on living cells in an experiment for activity determination is described, with chicken egg lysozyme being used as a standard model enzyme. The correctness of the calculations of the kinetic parameters is proved by counting the colony-forming units (CFUs). The physical and chemical parameters of the sorption of the enzyme on the cells are calculated and the correctness of the obtained equilibrium desorption constants is confirmed.     

Robust Parameter Identification to Perform the Modeling of <Emphasis Type="Italic">pta</Emphasis> and <Emphasis Type="Italic">poxB</Emphasis> Genes Deletion Effect on <Emphasis Type="Italic">Escherichia Coli</Emphasis>

The aim of this study was to design a robust parameter identification algorithm to characterize the effect of gene deletion on Escherichia coli (E. coli) MG1655. Two genes (pta and poxB) in the competitive pathways were deleted from this microorganism to inhibit pyruvate consumption. This condition deviated the E. coli metabolism toward the Krebs cycle. As a consequence, the biomass, substrate (glucose), lactic, and acetate acids as well as ethanol concentrations were modified. A hybrid model was proposed to consider the effect of gene deletion on the metabolism of E. coli. The model parameters were estimated by the application of a least mean square method based on the instrument variable technique. To evaluate the parametric identifier method, a set of robust exact differentiators, based on the super-twisting algorithm, was implemented. The hybrid model was successfully characterized by the parameters obtained from experimental information of E. coli MG1655. The significant difference between parameters obtained with wild-type strain and the modified (with deleted genes) justifies the application of the parametric identification algorithm. This characterization can be used to optimize the production of different byproducts of commercial interest.     

Synthesis and antibacterial activity of new <Emphasis Type="Italic">N</Emphasis>-substituted 7-amino-4-methyl-2<Emphasis Type="Italic">H</Emphasis>-chromen-2-ones

N-Substituted 7-amino-4-methyl-2H-chromen-2-ones containing one or two functionalized azole or azine moieties were synthesized. The structures of all synthesized compounds were confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy. Some of the synthesized compounds exhibited weak antibacterial activity against Rhizobium radiobacter, Escherichia coli, and Xanthomonas campestris.     

Study of the growth of <Emphasis Type="Italic">Enterococcus faecalis</Emphasis>, <Emphasis Type="Italic">Escherichia coli</Emphasis> and their mixtures by microcalorimetry

In a majority of environments, microbes live as interacting communities. Microbial communities are composed of a mix of microbes with often unknown functions. Polymicrobial diseases represent the clinical and pathological manifestations induced by the presence of multiple infectious agents. These diseases are difficult to diagnose and treat and usually are more severe than monomicrobial infections. The interaction relationship between Enterococcus faecalis and Escherichia coli was researched using a Calvet calorimeter. Three mixtures of both bacteria were prepared in the following proportions: 20 + 80 % (0.2 mL E. faecalis + 0.8 mL E. coli), 50 + 50 % (0.5 mL E. faecalis + 0.5 mL E. coli) and 80 + 20 % (0.8 mL E. faecalis + 0.2 mL E. coli). Experiments were carried out at concentration of 10⁶ CFU mL^?1 and a constant temperature of 309.65 K. The differences in shape of graph of E. faecalis, E. coli and their mixtures were compared. Also, the thermokinetic parameters such as detection time (t _d), growth constant (k), generation time (G) and the amount of heat released (Q) were calculated.     

<Emphasis Type="Italic">CrMAPK3</Emphasis> regulates the expression of iron-deficiency-responsive genes in <Emphasis Type="Italic">Chlamydomonas reinhardtii</Emphasis>

Background

Under iron-deficient conditions, Chlamydomonas exhibits high affinity for iron absorption. Nevertheless, the response, transmission, and regulation of downstream gene expression in algae cells have not to be investigated. Considering that the MAPK pathway is essential for abiotic stress responses, we determined whether this pathway is involved in iron deficiency signal transduction in Chlamydomonas.

Results

Arabidopsis MAPK gene sequences were used as entry data to search for homologous genes in Chlamydomonas reinhardtii genome database to investigate the functions of mitogen-activated protein kinase (MAPK) gene family in C. reinhardtii under iron-free conditions. Results revealed 16 C. reinhardtii MAPK genes labeled CrMAPK2–CrMAPK17 with TXY conserved domains and low homology to MAPK in yeast, Arabidopsis, and humans. The expression levels of these genes were then analyzed through qRT-PCR and exposure to high salt (150 mM NaCl), low nitrogen, or iron-free conditions. The expression levels of these genes were also subjected to adverse stress conditions. The mRNA levels of CrMAPK2, CrMAPK3, CrMAPK4, CrMAPK5, CrMAPK6, CrMAPK8, CrMAPK9, and CrMAPK11 were remarkably upregulated under iron-deficient stress. The increase in CrMAPK3 expression was 43-fold greater than that in the control. An RNA interference vector was constructed and transformed into C. reinhardtii 2A38, an algal strain with an exogenous FOX1:ARS chimeric gene, to silence CrMAPK3. After this gene was silenced, the mRNA levels and ARS activities of FOX1:ARS chimeric gene and endogenous CrFOX1 were decreased. The mRNA levels of iron-responsive genes, such as CrNRAMP2, CrATX1, CrFTR1, and CrFEA1, were also remarkably reduced.

Conclusion

CrMAPK3 regulates the expression of iron-deficiency-responsive genes in C. reinhardtii.

     

Production of <Emphasis Type="Italic">R</Emphasis>-Mandelic Acid Using Nitrilase from Recombinant <Emphasis Type="Italic">E. coli</Emphasis> Cells Immobilized with Tris(Hydroxymethyl)Phosphine

Recombinant Escherichia coli cells harboring nitrilase from Alcaligenes faecalis were immobilized using tris(hydroxymethyl)phosphine (THP) as the coupling agent. The optimal pH and temperature of the THP-immobilized cells were determined at pH 8.0 and 55 °C. The half-lives of THP-immobilized cells measured at 35, 40, and 50 °C were 1800, 965, and 163 h, respectively. The concentration of R-mandelic acid (R-MA) reached 358 mM after merely 1-h conversion by the immobilized cells with 500 mM R,S-mandelonitrile (R,S-MN), affording the highest productivity of 1307 g L^?1 day^?1 and the space-time productivity of 143.2 mmol L^?1 h^?1 g^?1. The immobilized cells with granular shape were successfully recycled for 60 batches using 100 mM R,S-MN as substrate at 40 °C with 64% of relative activity, suggesting that the immobilized E. coli cells obtained in this study are promising for the production of R-MA.     

In Vitro Screening of Indigenous <Emphasis Type="Italic">Lactobacillus</Emphasis> Isolates for Selecting Organisms with Better Health-Promoting Attributes

Lactobacilli have several attributes that provide health benefits to the host. The aim of this study was to screen indigenous lactobacilli from human gut and fermented foods for such attributes as production of β- and α-galactosidase and also their ability to reduce serum cholesterol. Lactobacilli were cultured on MRS broth and β-galactosidase activity was determined using o-nitrophenyl-β-D-galactopyranoside (ONPG) as a substrate. Three isolates Lactobacillus fermentum GPI-3 and L. fermentum GPI-6 and Lactobacillus salivarius GPI-1(S) showed better β-galactosidase activity than the standard strains Lactobacillus rhamnosus GG (LGG) and Lactobacillus plantarum ATCC 8014. The isolates showed variability in assimilating cholesterol during growth. Several isolates showed excellent cholesterol-lowering ability compared to standard strains LGG and L. plantarum ATCC 8014. Isolate L. rhamnosus SCB being the highest acid producer (pH 4.38) also showed the highest cholesterol reduction compared to other strains including standard strains. The ability of these isolates to produce α-galactosidase was also studied and the maximum α-galactosidase activity was found in isolate L. salivarius GPI-1(S) followed by L. fermentum FA-5 and Lactobacillus helveticus FA-7. This study therefore reports Lactobacillus isolates that have superior probiotic properties when compared to the standard strains; hence, they could be considered as potential probiotic strains, which can provide health benefits to the Indian population.     

Synthesis of oxo derivatives of <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">p</Emphasis>-tolysulfonyl)hexahydrocycloalka[<Emphasis Type="Italic">b</Emphasis>]indoles

Hydroxymercuration-demercuration of N-p-tolysulfonyl-4,4a,9,9a-tetrahydro-3H-carbazoles and N-p-tolyl(or methyl)sulfonyl-1,3a,4,8b-tetrahydrocyclopenta[b]indoles leads to the formation of the corresponding N-p-tolylsulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-2-ols and N-p-tolyl(or methyl)sulfonyl-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indol-2-ols. The latter are oxidized to 2-oxo derivatives with potassium dichromate. The oxidation of 2-methoxy-8-methyl-N-p-tolylsulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-1-ol under analogous conditions gives 2-methoxy-8-methyl-N-p-tolysulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-1-one.     

Functional Analysis of Ribonucleotide Reductase from <Emphasis Type="Italic">Cordyceps militaris</Emphasis> Expressed in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Cordyceps militaris produces cordycepin (3′-deoxyadenosine), which has various activities, including anti-oxidant, anti-tumoral, anti-viral, and anti-inflammatory. Ribonucleotide reductase (RNR) seems to be a candidate to produce cordycepin in C. militaris because RNR catalyzes the reduction of nucleotides to 2′-deoxynucleotides, whose structures are similar to that of cordycepin. However, the role of RNR has not been confirmed yet. In this study, complementary DNAs (cDNAs) of C. militaris RNR (CmRNR) large and small subunits (CmR1 and CmR2) were cloned from C. militaris NBRC9787 to investigate the function of CmRNR for its cordycepin production. C. militaris NBRC9787 began to produce cordycepin when grown in a liquid surface culture in medium composed of glucose and yeast extract for 15 days. CmR1 cDNA and CmR2 cDNA were obtained from its genomic DNA and from total RNA extracted from its mycelia after cultivation for 21 days, respectively. Recombinant CmR1 and CmR2 were expressed individually in Escherichia coli and purified. Purified recombinant CmR1 and CmR2 showed RNR activity toward adenosine diphosphate (ADP) only when two subunits were mixed but only show the reduction of ADP to 2′-deoxyADP. These results indicate that the pathway from ADP to 3′deoxyADP via CmRNR does not exist in C. militaris and cordycepin production in C. militaris may be mediated by other enzymes.     

Reactions of <Emphasis Type="Italic">N</Emphasis>-acetyl- and <Emphasis Type="Italic">N</Emphasis>-ethoxycarbonyl-2-(1-cycloalken-1-yl)anilines with <Emphasis Type="Italic">meta</Emphasis>-cloroperbenzoic acid

Reaction of N-ethoxycarbonyl-2-(1-cycloalken-1-yl)anilines with meta-cloroperbenzoic acid leads to the corresponding 2-[1-o-(3-chlorobenzoyl)-2-hydroxycyclopent-1-yl]anilines. 5-(2-Acetylaminophenyl)-5-oxopentanic or 6-oxohexanic acids are formed as main products in the reaction of N-acetyl-2-(1-cycloalken-1-yl)anilines with m-chloroperbenzoic acid in CH₂Cl₂. N-Acetyl-2-(1-cyclopenten-1-yl)-3,6-dimethylaniline is an exception in this series since its reaction stops at the stage of epoxide formation.     

Solid-phase microbead array for multiplex O-serotyping of <Emphasis Type="Italic">Escherichia coli</Emphasis>

Typing and classification of Escherichia coli (E. coli) according to cell wall components, like polysaccharides, is routinely done by serotyping. Given the presence of 188 known O-antigens, this process is complex. The authors present a proof-of-concept planar microbead array for multiplexed O-serotyping. Ten clinically relevant E. coli serotypes associated with high risk for diarrhea in humans were examined (O26, O55, O78, O118, O124, O127, O128, O142, O145 and O157). Antisera were assigned to specific microbead populations, which can be differentiated by size and fluorescence color. Automatted image processing and data analysis were conducted by a microscopic interpretation platform. Homogenous antiserum coating of the microbeads was demonstrated by an intra-population CV that ranges from 3.3 to 6.3% and by an inter-population CV of 9.5%. Typical detections limits are in the range from 0.31 to 0.71 refMFI. Significantly elevated fluorescence signals revealed that E. coli of a certain serogroup bound specifically to microbeads with the matching antiserum (p < 0.001). In our perception, the method represents a viable diagnostic tool for automated multiplex serotyping of E. coli. It enables simultaneous and high-throughput screening for different O-antigens by a simple staining and binding protocol.

Open image in new window

Graphical abstract Schematic of a planar microbead array for the typing and classification of E. coli according to cell wall components. Based on coated fluorescent microbeads, multiplex O-serotyping of E. coli is accomplished via fluorescence imaging.

     

Death kinetics of <Emphasis Type="Italic">Escherichia coli</Emphasis> in goat milk and <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> in cloudberry jam treated by ohmic heating

The influence of ohmic heating on the death kinetic parameters of Escherichia coli ATCC® 25922 in goat milk and spores of Bacillus licheniformis ATCC® 14580 in cloudberry jam was investigated and compared with that of conventional heating. Ohmic treatment of goat milk shortened the decimal reduction time D in comparison with the D values obtained at conventional treatment. Similarly, the z value, increase of temperature required for a ten-fold reduction of D, was also lower at ohmic treatment. The death kinetics of Bacillus licheniformis ATCC® 14580 spores in cloudberry jam was also studied employing both types of heat treatment. Similar conclusions were obtained for the D values as in the case of goat milk. However, the differences between the z values obtained for ohmic and conventional heating were not significant.     

Engineering <Emphasis Type="Italic">Pichia pastoris</Emphasis> for Efficient Production of a Novel Bifunctional <Emphasis Type="Italic">Strongylocentrotus purpuratus</Emphasis> Invertebrate-Type Lysozyme

Lysozymes are known as ubiquitously distributed immune effectors with hydrolytic activity against peptidoglycan, the major bacterial cell wall polymer, to trigger cell lysis. In the present study, the full-length cDNA sequence of a novel sea urchin Strongylocentrotus purpuratus invertebrate-type lysozyme (sp-iLys) was synthesized according to the codon usage bias of Pichia pastoris and was cloned into a constitutive expression plasmid pPIC9K. The resulting plasmid, pPIC9K-sp-iLys, was integrated into the genome of P. pastoris strain GS115. The bioactive recombinant sp-iLys was successfully secreted into the culture broth by positive transformants. The highest lytic activity of 960 U/mL of culture supernatant was reached in fed-batch fermentation. Using chitin affinity chromatography and gel-filtration chromatography, recombinant sp-iLys was produced with a yield of 94.5 mg/L and purity of >?99%. Recombinant sp-iLys reached its peak lytic activity of 8560 U/mg at pH 6.0 and 30 °C and showed antimicrobial activities against Gram-negative bacteria (Vibrio vulnificus, Vibrio parahemolyticus, and Aeromonas hydrophila) and Gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis). In addition, recombinant sp-iLys displayed isopeptidase activity which reached the peak at pH 7.5 and 37 °C with the presence of 0.05 M Na⁺. In conclusion, this report describes the heterologous expression of recombinant sp-iLys in P. pastoris on a preparative-scale, which possesses lytic activity and isopeptidase activity. This suggests that sp-iLys might play an important role in the innate immunity of S. purpuratus.     

Properties and <Emphasis Type="Italic">N</Emphasis>-glycosylation of recombinant endoglucanase II from <Emphasis Type="Italic">Penicillium verruculosum</Emphasis>

Cellulases are the main components of enzyme complexes used in biotransformation processes of plant raw materials into valuable commercial products. Endoglucanase II (EG II) from the Penicillium verruculosum fungus was cloned into Penicillium canescens. The homogeneous recombinant EGII form is isolated and its properties are studied in comparison with the native enzyme. The N-glycosylation sites and the structure of the N-linked glycans are been determined using mass spectrometry. The biochemical and catalytic properties, as well as the N-glycosylation type of the obtained recombinant EGII form, appear to be close to the native enzyme. At the two potential N-glycosylation sites (N42 and N194) of both forms of the enzyme, N-linked high mannose glycans (or their enzymatic “trimming” products) according to the general formula (Man)_1–9(GlcNAc)₂ are detected. No glycosylation is found at the third potential site (N19).     

Viscosities and Surface Tensions of Phenetole with <Emphasis Type="Italic">N</Emphasis>-Methyl-2-pyrrolidone, <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethylformamide and Tetrahydrofuran Binary Systems at Three Temperatures

Viscosities, η, and surface tensions, σ, of binary systems of phenetole (ethoxy benzene or ethyl phenyl ether) with N-methyl-2-pyrrolidone, N,N-dimethylformamide or with tetrahydrofuran were measured over the entire mole fraction range and at (298, 303 and 308) K. The experimental data was used to compute the deviations in viscosity, Δη, and surface tension, Δσ. Values of the excess Gibbs energy of activation G*^E, surface entropy S _σ and surface enthalpy H _σ were calculated. Viscosity data of the binary systems were calculated using the Grunberg and Nissan and the three-body and four-body McAllister correlations. The Redlich–Kister method was used for evaluation of coefficients and standard deviations for Δη, Δσ and G*^E. The results were interpreted in terms of the probable effect of molecular interactions between components as well as polarity.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-and <Emphasis Type="Italic">C</Emphasis>-trimethylsilyl-substituded anililes

N-Metallation of bromoanilines with ethylmagnesium bromide followed by a reaction with trimethylchlorosilane provided N-mono and N-bis(trimethylsilyl)bromoanilines depending on the structure of substrate. The metallation of bissilylated bromoanilines with butyllithium permitted the introduction of a trimethylsilyl substituent in the aromatic ring. Previously unknown 2-bromo-N,N-bis(trimethylsilyl)aniline, 2,6-dibromo-N-trimethylsilylaniline, 2,6-dibromo-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilylaniline, 2-bromo-6-trimethylsilyl-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilyl-N-trimethylsilylaniline, 2,4,6-tribromo-N-trimethylsilylaniline, and 2,4,6-tribromo-N,N-bis(trimethylsilyl)aniline were prepared. The structures of the compounds obtained were established by the chromato-mass spectrometry and ¹H, ¹³C, and ²⁹Si NMR spectroscopy.     

Compositions and structures of nanoparticles of trigonal symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>3<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

A method has been developed for the determination of the structure and number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group. The formulas for calculation of the number of particles of symmetry D _3d have been reported. It has been shown that the number of atoms in trigonal shells is determined by three structurally invariant numbers and the quantum number of the group order n. All possible nanostructures of symmetry D _3d have been classified: C_{θ + 6z} , z = 0, 1, 2, ..., where the basic shells are C_θ = C₆, C₈, and C₁₄. A sum rule has been obtained for the coordination numbers of the shell sites located on symmetry axes. Trigonal nanoparticles are parent ones for obtaining (3,0), (6,0), and (9,0) nanotubes of trigonal type. The general formulas of these nanotubes with icosahedral, dodecahedral, and cubic caps are N_{8 + 12p} , N_{20 + 24p} , and N_{60 + 36p} (p = 1, 2, ...), respectively. The graphical constructions of all classes of trigonal nanoparticles and nanotubes are reported.     

Compositions and structures of nanoparticles of pentagonal axial symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>5<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

The method of determination of the structure and the number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group has been developed. The formulas for the calculation of the number of particles with symmetry group D _5d are reported. The number of particles in these shells is determined by three structurally invariant numbers and the “quantum number” of the group order n. The classification of all possible nanostructures with symmetry group D _5d is given: C _θ+10z , z = 0, 1, 2, …, where the basic shells are C _θ = C ₂, C ₁₀, C ₁₂. The sum rule has been obtained for the coordination numbers of shell sites located at symmetry axes. Pentagonal axial nanoparticles are shown to be the initial shells for obtaining (5,5) and (10,10) armchair nanotubes or (5,0) and (10,0) zigzag nanotubes. The general formula of these nanotubes closed with icosahedral and dodecahedral caps is N _20+10p , N _60+10p (p = 1, 2, …). The graphical constructions of all classes of nanoparticles and nanotubes of the pentagonal axial type are reported.     

Soluble expression of recombinant midgut zymogen (native propeptide) proteases from the <Emphasis Type="Italic">Aedes aegypti</Emphasis> Mosquito Utilizing <Emphasis Type="Italic">E. coli</Emphasis> as a host

Background

Studying proteins and enzymes involved in important biological processes in the Aedes aegypti mosquito is limited by the quantity that can be directly isolated from the mosquito. Adding to this difficulty, digestive enzymes (midgut proteases) involved in metabolizing blood meal proteins require a more oxidizing environment to allow proper folding of disulfide bonds. Therefore, recombinant techniques to express foreign proteins in Escherichia coli prove to be effective in producing milligram quantities of the expressed product. However, with the most commonly used strains having a reducing cytoplasm, soluble expression of recombinant proteases is hampered. Fortunately, new E. coli strains with a more oxidizing cytoplasm are now available to ensure proper folding of disulfide bonds.

Results

Utilizing an E. coli strain with a more oxidizing cytoplasm (SHuffle® T7, New England Biolabs) and changes in bacterial growth temperature has resulted in the soluble expression of the four most abundantly expressed Ae. aegypti midgut proteases (AaET, AaSPVI, AaSPVII, and AaLT). A previous attempt of solubly expressing the full-length zymogen forms of these proteases with the leader (signal) sequence and a modified pseudo propeptide with a heterologous enterokinase cleavage site led to insoluble recombinant protein expression. In combination with the more oxidizing cytoplasm, and changes in growth temperature, helped improve the solubility of the zymogen (no leader) native propeptide proteases in E. coli. Furthermore, the approach led to autocatalytic activation of the proteases during bacterial expression and observable BApNA activity. Different time-points after bacterial growth induction were tested to determine the time at which the inactive (zymogen) species is observed to transition to the active form. This helped with the purification and isolation of only the inactive zymogen forms using Nickel affinity.

Conclusions

The difficulty in solubly expressing recombinant proteases in E. coli is caused by the native reducing cytoplasm. However, with bacterial strains with a more oxidizing cytoplasm, recombinant soluble expression can be achieved, but only in concert with changes in bacterial growth temperature. The method described herein should provide a facile starting point to recombinantly expressing Ae. aegypti mosquito proteases or proteins dependent on disulfide bonds utilizing E. coli as a host.

     

Synthesis of ethyl (2<Emphasis Type="Italic">E</Emphasis>,4<Emphasis Type="Italic">E</Emphasis>)- and (2<Emphasis Type="Italic">E</Emphasis>,4<Emphasis Type="Italic">Z</Emphasis>)-5-chloropenta-2,4-dienoates

An efficient synthetic approach to 2E,4E and 2E,4Z isomers of ethyl 5-chloropenta-2,4-dienoate has been developed on the basis of one-pot oxidation–olefination of readily accessible (E)- and (Z)-3-chloroprop-2-en-1-ols by the action of barium manganate and ethyl (triphenyl-λ⁵-phosphanylidene)acetate.