Hydrothermal synthesis and characterization of In<Superscript>3+</Superscript> modified BiVO<Subscript>4</Subscript> nanoparticles with enhanced photocatalytic activity

In³⁺-doped BiVO₄ nanoparticles with enhanced visible light activity have been successfully synthesized by a hydrothermal method. The synthesized materials were characterized by X-ray diffraction, Raman, X-ray photoelectron spectroscopy, scanning electron microscopy, BET surface areas analysis, and ultraviolet–visible diffuse reflectance spectra. In comparison with pure BiVO₄, the In³⁺-doped BiVO₄ displayed greater photocatalytic activity in the degradation of methyl blue under visible light illumination. All samples possessed a single monoclinic structure. The introduction of In ions resulted in structural distortion and the decreased band gap energy, producing more electrons and holes for photocatalytic reaction. In the meantime, the doping In ions entails a red shift in the absorption edge and an increase in the intensity of light absorption. The best photocatalytic performance was obtained with the BiVO₄ sample containing 5.0 mol% In ions.     

Synthesis,Characterization and Photocatalytic Activity of Ag+‐ and Sn2+‐Doped KTi0.5Te1.5O6

In this study, the photocatalytic dye degradation efficiency of KTi_0.5Te_1.5O₆ synthesized through solid‐state method was enhanced by cation (Ag⁺/Sn⁺²) doping at potassium site via ion exchange method. As prepared materials were characterized by XRD, SEM‐EDS, IR, TGA and UV–Vis Diffuse reflectance spectroscopic (DRS) techniques. All the compounds were crystallized in cubic lattice with space group. The bandgap energies of parent, Ag⁺‐ and Sn⁺²‐doped KTi_0.5Te_1.5O₆ materials obtained from DRS profiles were found to be 2.96, 2.55 and 2.40 eV, respectively. Photocatalytic efficiency of parent, Ag⁺‐ and Sn⁺²‐doped materials was evaluated against the degradation of methylene blue (MB) and methyl violet (MV) dyes under visible light irradiation. The Sn⁺²‐doped KTi_0.5Te_1.5O₆ showed higher activity toward the degradation of both MB and MV dyes and its higher activity is ascribed to the lower bandgap energy compared to the parent and Ag⁺‐doped KTi_0.5Te_1.5O₆. The mechanistic degradation pathway of methylene blue (MB) was studied in the presence of Sn²⁺‐doped KTi_0.5Te_1.5O₆. Quenching experiments were performed to know the participation of holes, super oxide and hydroxyl radicals in the dye degradation process. The stability and reusability of the catalysts were studied.     

Structural characterization and photocatalytic properties of novel Bi<Subscript>2</Subscript>FeVO<Subscript>7</Subscript>

Bi₂FeVO₇ was prepared by a solid-state reaction technique for the first time and the structural and photocatalytic properties of Bi₂FeVO₇ were studied. The results shows that this compound crystallized in the tetragonal crystal system with space group I4/mmm. Moreover, the band gap of Bi₂FeVO₇ was estimated to be about 2.22(6) eV. For the photocatalytic water splitting reaction, H₂ or O₂ evolution was observed from pure water with Bi₂FeVO₇ as the photocatalyst by ultraviolet light irradiation. Degradation of aqueous methylene blue (MB) dye by photocatalytic way over this compound was further studied under visible light irradiation. Bi₂FeVO₇ shows higher catalytic activity compared to TiO₂ (P-25) for MB photocatalytic degradation under visible light irradiation. Complete removal of aqueous MB was realized after visible light irradiation for 170 min with Bi₂FeVO₇ as the photocatalyst. The reduction of the total organic carbon (TOC) and the formation of inorganic products, SO ₄ ²⁻ and NO ₃ ⁻ revealed the continuous mineralization of aqueous MB during the photocatalytic course.     

One-dimensional porous Ag/AgBr/TiO<Subscript>2</Subscript> nanofibres with enhanced visible light photocatalytic activity

One-dimensional (1D) Ag/AgBr/TiO₂ nanofibres (NFs) have been successfully fabricated by the one-pot electrospinning method. In comparison with bare TiO₂ NFs and Ag/AgBr/PVP (polyvinylpyrrolidone) NFs, the 1D Ag/AgBr/TiO₂ NFs photocatalyst exhibits much higher photocatalytic activity in the degradation of a commonly used dye, methylene blue (MB), under visible light. The photocatalytic removal efficiency of MB over Ag/AgBr/TiO₂ NFs achieves almost 100 % in 20 min. The photocatalytic reaction follows the first-order kinetics and the rate constant (k) for the degradation of MB by Ag/AgBr/TiO₂ NFs is 5.2 times and 6.6 times that of Ag/AgBr/PVP NFs and TiO₂ NFs, respectively. The enhanced photocatalytic activity is ascribed to the stronger visible light absorption, more effective separation of photogenerated electron-hole pairs, and faster charge transfer in the long nanofibrous structure. The Ag/AgBr/TiO₂ NFs maintain a highly stable photocatalytic activity due to its good structural stability and the self-stability system of Ag/AgBr. The mechanisms for photocatalysis associated with Ag/AgBr/TiO₂ NFs are proposed. The degradation of MB in the presence of scavengers reveals that h⁺ and ^?O ₂ ^? significantly contribute to the degradation of MB.     

Influence of annealing temperature on material properties of red emitting ZnGa<Subscript>2</Subscript>O<Subscript>4</Subscript>: Cr<Superscript>3+</Superscript> nanostructures

Zinc gallate (ZnGa₂O₄) nanopowders doped with Cr³⁺ (1?mo%) were synthesized by the citric acid assisted sol–gel method. The influence of annealing temperature, structural, morphological, and optical properties of ZnGa₂O₄: Cr³⁺ (1?mol%) nanosized particles were investigated. The X-ray diffraction (XRD) spectra indicated that the nanoparticles are cubic in structure and the annealing temperature did not influence any c in structure. The average crystallite size of ZnGa₂O₄: Cr³⁺ nanoparticles were observed to increase from 11.85 to 30.88?nm as the annealing temperature increased from 600 to 1000?°C. The scanning electron microscopy (SEM) showed nearly spherical nanostructures that change in size with annealing temperature. The high resolution transmission electron microscope (HR-TEM) images show well resolved lattice fringes which is an indications of highly crystalline samples. Ultraviolet–visible (UV–Vis) measurement show decrease in reflectance in visible region and energy band gap was found to decrease with annealing temperature. The photoluminescence (PL) intensity was found to be maximum for sample annealed at high temperature (1000?°C) and least with sample annealed at low temperature (600?°C). An increase in annealing temperature leads significantly increment in PL intensity. The degree of crystallinity also increased with annealing temperature from XRD, SEM, and HR-TEM analysis. The photoluminescence lifetimes, particle size, and emission spectra are comparable with reports on bioimaging applications.

Open image in new window

     

Influence of Transition Metal Cationization versus Sodium Cationization and Protonation on the Gas-Phase Tautomeric Conformations and Stability of Uracil: Application to [Ura+Cu]<Superscript>+</Superscript> and [Ura+Ag]<Superscript>+</Superscript>

The gas-phase conformations of transition metal cation-uracil complexes, [Ura+Cu]⁺ and [Ura+Ag]⁺, were examined via infrared multiple photon dissociation (IRMPD) action spectroscopy and theoretical calculations. IRMPD action spectra were measured over the IR fingerprint and hydrogen-stretching regions. Structures and linear IR spectra of the stable tautomeric conformations of these complexes were initially determined at the B3LYP/6-31G(d) level. The four most stable structures computed were also examined at the B3LYP/def2-TZVPPD level to improve the accuracy of the predicted IR spectra. Two very favorable modes of binding are found for [Ura+Cu]⁺ and [Ura+Ag]⁺ that involve O2N3 bidentate binding to the 2-keto-4-hydroxy minor tautomer and O4 monodentate binding to the canonical 2,4-diketo tautomer of Ura. Comparisons between the measured IRMPD and calculated IR spectra enable elucidation of the conformers present in the experiments. These comparisons indicate that both favorable binding modes are represented in the experimental tautomeric conformations of [Ura+Cu]⁺ and [Ura+Ag]⁺. B3LYP suggests that Cu⁺ exhibits a slight preference for O4 binding, whereas Ag⁺ exhibits a slight preference for O2N3 binding. In contrast, MP2 suggests that both Cu⁺ and Ag⁺ exhibit a more significant preference for O2N3 binding. The relative band intensities suggest that O4 binding conformers comprise a larger portion of the population for [Ura+Ag]⁺ than [Ura+Cu]⁺. The dissociation behavior and relative stabilities of the [Ura+M]⁺ complexes, M⁺ = Cu⁺, Ag⁺, H⁺, and Na⁺) are examined via energy-resolved collision-induced dissociation experiments. The IRMPD spectra, dissociation behaviors, and binding preferences of Cu⁺ and Ag⁺ are compared with previous and present results for those of H⁺ and Na⁺.

Open image in new window

Graphical Abstract ?

     

Synthesis of monodisperse pancake-like Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> with prominent photocatalytic performances

Uniform Bi₂WO₆ pancakes were prepared via a solvothermal route in a solvent mixture of glycerol (Gly) and water (V/V = 1). A variety of techniques including scanning electron microscopy, transmission electron micrographs, X-ray powder diffraction, Brunauer–Emmett–Teller, FT-IR spectra, and UV–Vis diffuse reflectance spectra, were employed to characterize the structure and properties of the as-obtained Bi₂WO₆. It was found that Bi₂WO₆ pancakes showed prominent photocatalytic performance for the degradation of rhodamine B (RhB) under visible light (λ ≥ 420 nm) irradiation, which can be attributed to its good crystallization, large surface area, unique morphology and structural features.     

Synthesis of Fe<Superscript>3+</Superscript> doped ordered mesoporous TiO<Subscript>2</Subscript> with enhanced visible light photocatalytic activity and highly crystallized anatase wall

Fe³⁺ doped mesoporous TiO₂ with ordered mesoporous structure were successfully prepared by the solvent evaporation-induced self-assembly process using P123 as soft template. The properties and structure of Fe³⁺ doped mesoporous TiO₂ were characterized by means of XRD, EPR, BET, TEM, and UV–vis absorption spectra. The characteristic results clearly show that the amount of Fe³⁺ dopant affects the mesoporous structure as well as the visible light absorption of the catalysts. The photocatalytic activity of the prepared mesoporous TiO₂ was evaluated from an analysis of the photodegradation of methyl orange under visible light irradiation. The results indicate that the sample of 0.50%Fe–MTiO₂ exhibits the highest visible light photocatalytic activity compared with other catalysts.     

Preparation,characterization and enhanced photocatalytic activity of Ni<Superscript>2+</Superscript> doped titania under solar light

Anatase TiO₂ was prepared by sol-gel method through the hydrolysis of TiCl₄. Ni²⁺ was doped into the TiO₂ matrix in the concentration range of 0.02 to 0.1 at.% and characterized by various analytical techniques. Powder X-ray diffraction revealed only anatase phase for all the samples, while diffuse reflectance spectral studies indicated a red shift in the band gap absorption to the visible region. The photocatalytic activities of these photocatalysts were probed for the degradation of methyl orange under natural solar light. The photocatalyst with optimum doping of 0.08 at.% Ni²⁺, showed enhanced activity, which is attributed to: (i) effective separation of charge carriers and (ii) large red shift in the band gap to visible region. The influence of crystallite size and dopant concentration on the charge carrier trapping — recombination dynamics is investigated.     

Electronic state and local surrounding of <Superscript>119</Superscript>Sn in calcium-substituted holmium orthochromites

The influence of Ca²⁺ doped into the holmium sublattice on the magnetically active surrounding of Sn⁴⁺ ions located in the chromium sublattice of Ho_1–x Ca _x Cr_0.997Sn_0.003O₃ (x = 0, 0.003, and 0.1) compounds was studied by ¹¹⁹Sn Mössbauer spectroscopy. At concentrations [Ca] = [Sn] = 0.3 mol %, an increase was observed in the spectral contribution of Sn⁴⁺ sites, having the full number of nearest-neighbor Cr³⁺cations (n = 6), where they perceived a magnetic field H(Sn)_{4.2 K} = 82 kOe, compared to the contribution of the relevant sites in the undoped chromite (x = 0). This observation was interpreted as resulting from a reduced probability of appearance of Cr³⁺ vacancies in the nearest surrounding of heterovalent Sn⁴⁺ ions. For x = 0.1, on the contrary, the ¹¹⁹Sn spectrum revealed a reduced contribution from the Sn⁴⁺ sites with n = 6. This evolution is shown not to be due neither to the appearance of Cr⁴⁺ nor Cr⁶⁺ ions in the nearest neighborhood of Sn⁴⁺ in the chromium sublattice to balance the charge deficiency of the Ca²⁺ ions doped into the holmium sublattice. This allowed us to suggest that the observed effect was due to the onset of Sn⁴⁺ segregations in the structure of Ho_0.9Ca_0.1Cr_0.997Sn_0.003O₃, which contained a far greater amount of Ca²⁺ ions whose charge deficiency was balanced mostly by Cr⁴⁺ formation. Studies of samples that were prepared under a hydrogen atmosphere revealed the reduction of Sn⁴⁺ to the oxidation state +2, with the concomitant stabilization of the formed Sn²⁺ ions on crystallite surfaces on sites having low coordination numbers.     

Effect of the Support on the Nature of Metal-Promoter Interactions in Ru-Cs<Superscript>+</Superscript>/MgO and Ru-Cs<Superscript>+</Superscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts for Ammonia Synthesis

The Ru-Cs⁺/MgO and Ru-Cs⁺/γ-Al₂O₃ catalysts, which were prepared by an impregnation method using RuOHCl₃ and Cs₂CO₃ as precursor compounds and reduced with H₂ at 450°C, are characterized by X-ray diffraction, high-resolution transmission electron microscopy (with X-ray microanalysis), and X-ray photoelectron spectroscopy (XPS). The Cs⁺/MgO(Al₂O₃) systems, Ru-Cs⁺ black, and model systems prepared by cesium sputtering onto polycrystalline ruthenium foil are studied as reference samples. It is found that, in the Ru-Cs⁺/MgO sample, cesium is present as a Cs_{2 + x}O cesium suboxide, which weakly interacts with the support, localized on the surface of Ru particles or near them. In the case of Ru-Cs⁺/γ-Al₂O₃, cesium occurs as a species that is tightly bound to the support; this is likely surface cesium aluminate, which prevents promoter migration to Ru particles. The Ru-Cs⁺/MgO sample exhibits a considerable shift of the Ru3d line in the XPS spectra toward lower binding energies, as compared to the bulk metal. It is hypothesized that this shift is due to a decrease in the electron work function from the surface of ruthenium because of the polarizing effect of Cs⁺ ions in contact with Ru particles. Based on the experimental results, the great difference between the catalytic activities of the Ru-Cs⁺/MgO and Ru-Cs⁺/γ-Al₂O₃ systems in ammonia synthesis at 250–400°C and atmospheric pressure is explained.     

Photocatalytic degradation of organic dyes by Er<Superscript>3+</Superscript>: YAlO<Subscript>3</Subscript>/Co- and Fe-doped ZnO coated composites under solar irradiation

In this work, the Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites were prepared by the sol-gel method. Then, they were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDX). Photo-degradation of azo fuchsine (AF) as a model dye under solar light irradiation was studied to evaluate the photocatalytic activity of the Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites. It was found that the photocatalytic activity of Co- and Fe-doped ZnO composites can be obviously enhanced by upconversion luminescence agent (Er³⁺: YAlO₃). Besides, the photocatalytic activity of Er³⁺: YAlO₃/Fe-doped ZnO is better than that of Er³⁺: YAlO₃/Co-doped ZnO. The influence of experiment conditions, such as the concentration of Er³⁺: YAlO₃, heat-treatment temperature and time on the photocatalytic activity of the Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites was studied. In addition, the effects of solar light irradiation time, dye initial concentration, Er³⁺: YAlO₃/Co- and Fe-doped ZnO amount on the photocatalytic degradation of azo fuchsine in aqueous solution were investigated in detail. Simultaneously, some other organic dyes, such as Methyl Orange (MO), Rhodamine B (RM-B), Acid Red B (AR-B), Congo Red (CR), and Methyl Blue (MB) were also studied. The possible excitation principle of Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites under solar light irradiation and the photocatalytic degradation mechanism of organic dyes were discussed.     

Microstructures and photocatalytic properties of Ag and La surface codoped TiO2 films prepared by sol–gel method

Ag⁺ and La³⁺ surface codoped TiO₂ films were successfully prepared by the improved sol–gel and doping processes. The as-prepared specimens were characterized using differential thermal analysis-thermogravimetry (DTA–TG), X-ray diffraction (XRD), high-resolution field emission scanning electron microscopy (FE-SEM), X-ray energy dispersive spectroscopy (EDS), Brunauer–Emmett–Teller (BET) surface area, Photoluminescence spectrum (PL) and UV–vis diffuse reflectance spectroscopy. The photocatalytic activities of the films were evaluated by degradation of an organic dye in aqueous solution. The results of XRD, FE-SEM and BET analyses indicated that the TiO₂ films were composed of nano-particles or aggregates with a size of less than 10 nm. With the codoping of Ag⁺ and La³⁺, TiO₂ films with high photocatalytic activity and clearly responsive to the visible light were obtained. The improvement mechanism by ions doping was also discussed.     

Photocatalysis enhancement of CaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>, Nd<Superscript>3+</Superscript>@TiO<Subscript>2</Subscript> composite powders

CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders were synthesized by a sol–gel method under mild conditions (i.e. low temperature and ambient pressure). The as-prepared powders were characterized by transmission electron microscopy (TEM) and analyzed by X-ray diffraction (XRD). The photocatalytic behavior of the TiO₂-base surfaces was evaluated by the degradation of nitrogen monoxide gas. It suggested that CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders were composed of anatase titania and that CaAl₂O₄:Eu²⁺, Nd³⁺. TiO₂ particles were deposited on the surface of CaAl₂O₄:Eu²⁺, Nd³⁺ to form uniform film. CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders exhibited higher photocatalytic activity compared with pure TiO₂ under visible light. And the result also clearly indicated that the long afterglow phosphor absorbed and stored lights for the TiO₂ to remain photocatalytic activity in the dark.     

Ag<Subscript>3</Subscript>PO<Subscript>4</Subscript>/Bi<Subscript>2</Subscript>MoO<Subscript>6</Subscript> heterostructures with enhanced visible light photocatalytic activity for the degradation of rhodamine B

Highly efficient visible-light-driven Ag₃PO₄/Bi₂MoO₆ hybrid photocatalysts with different mole ratios of Ag₃PO₄ were prepared via sonochemical method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that product are cubic Ag₃PO₄ nanoparticles supported on orthorhombic Bi₂MoO₆ nanoplates. Under visible light irradiation (>420 nm), the Ag₃PO₄/Bi₂MoO₆ photocatalysts displayed the higher photocatalytic activity than pure Bi₂MoO₆ for the decolorization of rhodamine B (RhB). Among the hybrid photocatalysts, 10% Ag₃PO₄/Bi₂MoO₆ exhibited the highest photocatalytic activity for the decolorization of RhB due to the efficient separation of electron–hole pairs.     

Sn-doped Li<Subscript>1.2</Subscript>Mn<Subscript>0.54</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>O<Subscript>2</Subscript> cathode materials for lithium-ion batteries with enhanced electrochemical performance

Sn-doped Li-rich layered oxides of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ have been synthesized via a sol-gel method, and their microstructure and electrochemical performance have been studied. The addition of Sn⁴⁺ ions has no distinct influence on the crystal structure of the materials. After doped with an appropriate amount of Sn⁴⁺, the electrochemical performance of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ cathode materials is significantly enhanced. The optimal electrochemical performance is obtained at x = 0.01. The Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode delivers a high initial discharge capacity of 268.9 mAh g^?1 with an initial coulombic efficiency of 76.5% and a reversible capacity of 199.8 mAh g^?1 at 0.1 C with capacity retention of 75.2% after 100 cycles. In addition, the Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode exhibits the superior rate capability with discharge capacities of 239.8, 198.6, 164.4, 133.4, and 88.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively, which are much higher than those of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (196.2, 153.5, 117.5, 92.7, and 43.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively). The substitution of Sn⁴⁺ for Mn⁴⁺ enlarges the Li⁺ diffusion channels due to its larger ionic radius compared to Mn⁴⁺ and enhances the structural stability of Li-rich oxides, leading to the improved electrochemical performance in the Sn-doped Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode materials.     

Sensitive electrochemical DNA-based biosensors for the determination of Ag<Superscript>+</Superscript> and Hg<Superscript>2+</Superscript> ions and their application in analysis of amalgam filling

In the present paper, we used single-stranded poly-T (100% thymine bases) and poly-C (100% cytosine bases) nucleic acids as DNA probes for selective and sensitive individual electrochemical determination of Hg²⁺ and Ag⁺_, respectively, on the multi-walled carbon nanotube paste electrodes (MWCNTPEs) using [Fe(CN)₆]^3?/4? as electroactive labels. In the presence of Hg²⁺ and Ag⁺, the probe–Hg²⁺/Ag⁺ interactions through T–Hg²⁺–T and C–Ag⁺–C complexes formation could cause the formation of a unimolecular hybridized probe. This structure of probe led to its partial depletion from electrode surface and facilitation of electron transfer between [Fe(CN)₆]^3?/4? redox couple and electrode surface, resulting in the enhanced differential pulse voltammetry (DPV) oxidation current of [Fe(CN)₆]^3?/4? at the probe-modified electrode surface. We applied the difference in the oxidation peak currents of [Fe(CN)₆]^3?/4? before and after Hg²⁺/Ag⁺–DNA probe bonding (?I) for electrochemical determination of these heavy metal ions. Detection limits were 8.0?×?10^?12 M and 1.0?×?10^?11 M for Hg²⁺ and Ag⁺ ions determination, respectively. The biosensors were utilized to determine the weight percent of toxic metals, i.e., silver and mercury in dental amalgam filling composition. The results of their practical applicability in analysis of the amalgam sample were satisfactory.     

Quantum-Chemical Investigation of Structure and Vibration Spectrum of [C(NPCl<Subscript>3</Subscript>)<Subscript>3</Subscript>]<Superscript>+</Superscript> Cation

Structural parameters of the cation [C(NPCl₃)₃]⁺ in vacuum and in acetonitrile are calculated by the methods RHF/6-311G(3d₆), RHF/6-31(3d₅) and B3LYP/6-311(3d₅f₇). Formation energy of the free adduct (MeCN) 2[C(NPCl₃)₃]⁺ is calculated and nonspecific character of interaction of the cation with liquid acetonitrile is established. Vibration spectrum of the cation is calculated and theoretical interpretation of IR and Raman spectra of the salt [C(NPCl₃)₃]⁺[SbCl₆]^? is refined.     

Preparation of nanocrystalline Fe-doped TiO<Subscript>2</Subscript> powders as a visible-light-responsive photocatalyst

Nanocrystalline Fe-doped TiO₂ powders were prepared using TiOSO₄, urea, and Fe(NO₃)₃ · 9H₂O as precursors through a hydrothermal method. The as-synthesized yellowish-colored powders are composed of anatase TiO₂, identified by X-ray diffraction (XRD). The grain size ranged from 9.7 to 12.1 nm, calculated by Scherrer’s method. The specific surface area ranged from 141 to 170 m²/g, obtained by the Brunauer–Emmett–Teller (BET) method. The transmission electron microscopy (TEM) micrograph of the sample shows that the diameter of the grains is uniformly distributed at about 10 nm, which is consistent with that calculated by Scherrer’s method. Fe³⁺ and Fe²⁺ have been detected on the surface of TiO₂ powders by X-ray photoelectron spectroscopy (XPS). The UV–Vis diffuse reflection spectra indicate that the light absorption thresholds of the Fe-doped TiO₂ powders have been red-shifted into the visible light region. The photocatalytic activity of the Fe-doped TiO₂ was evaluated through the degradation of methylene blue (MB) under visible light irradiation. The Fe-doped TiO₂ powders have shown good visible-light photocatalytic activities and the maximum degradation ratio is achieved within 4.5 h.     

Novel 1,8-naphthalimide dye for multichannel sensing of H<Superscript>+</Superscript> and Cu<Superscript>2+</Superscript>

A novel 1,8-naphthalimide dye with simple structure has been produced by a facile synthetic method for colorimetric and fluorescent sensing of H⁺ and Cu²⁺. In CH₃CN/H₂O (1/1, v/v), the dye could monitor H⁺ using dual channels (ratiometric absorbance and fluorescence intensity change) from pH 6.2 to 12.0. Meanwhile, in the pH range of 1.9–5.2, the dye could also be used to detect Cu²⁺ using triple channels [ultraviolet–visible (UV–Vis) absorption, fluorescence intensity reduction, as well as fluorescence blueshift]. The detection limits for Cu²⁺ evaluated by colorimetric and fluorescent titration were 6.10 × 10^?7 and 2.62 × 10^?7 M, respectively. The dye exhibited specific selectivity and sensitivity for H⁺ and Cu²⁺ over various coexisting metal ions. Moreover, the sensing mechanism of the dye for H⁺ and Cu²⁺ was carefully examined.