Solvatochromic shifts of naphthalene and pyrene excimers

Solvatochromic shifts of pyrene (Py) and naphthalene (Np) excimers were obtained in polar and non-polar solvents. The observed shifts for both excimers are explained by changes in the polarizability between the excimer and the dissociative ground state. The magnitudes of the shifts in the pyrene excimer are larger, indicating that the pyrene excimer is more polarizable than the naphthalene excimer.     

Study of the diffusion of pyrene in silicone polymer coatings by steady state fluorescence technique: effects of pyrene concentration

The concentration dependence of the diffusion coefficient of pyrene in single component and two-component room temperature curing silicone polymer coatings is investigated by the steady state fluorescence technique by measuring the pyrene excimer fluorescence intensity. At pyrene concentrations lower than 10 mM, the intensity of excimer fluorescence is proportional to the concentration and at higher concentrations it deviates from this trend due to concentration quenching. Thermal aging studies show that this concentration quenching can be removed by thermal annealing and the excimer emission intensity approaches the value expected from the trend at lower concentrations. The diffusion coefficient of pyrene at low concentrations in silicone polymer coatings is obtained using the approximate solution of one-dimensional diffusion equation. A modified approach is employed to estimate the diffusion coefficient at higher pyrene concentrations. In this method, the excimer intensity and time scale are shifted, respectively to I_max the maximum value of excimer intensity attained during annealing and t_max, the time taken to reach this. The estimated diffusion coefficients at different pyrene concentrations show a negligible dependence on pyrene concentration in both types of polymers. These results are attributed to the high structural mobility of silicone polymer chains due to their molecular structure.     

Morphology-controllable synthesis of pyrene nanostructures and its morphology dependence of optical properties

Morphology-controllable synthesis of various pyrene nanostructures from nanoparticles to short nanorods and nanowires (long nanorods) was achieved by a simple self-assembly method. In this approach, aqueous sodium dodecyl sulfate (SDS) micelles were used as templates to direct the self-assembly of the pyrene molecules into nanorods. It was found that changing the concentration ratio of the pyrene to SDS molecules could be employed to control the aspect ratio (length to diameter) of the pyrene nanostructures from 1 to 50 or higher. Moreover, the dimensional variation was accompanied by changes of their optical properties. With the increase of the aspect ratio, the characteristic fluorescence of the isolated pyrene molecules was suppressed and concurrently replaced by the excimer emission of the pyrene nanostructures. A blue-shift was observed in the excimer emission peaks as the length of the nanorods increased. The growth mechanism and the change in optical properties of these pyrene nanostructures were discussed in detail.     

Pyrene.pyrene complexes at the active site of cytochrome P450 3A4: evidence for a multiple substrate binding site

Cytochrome P450 monooxygenases (CYPs) metabolize nearly all drugs and toxins. Recently, it has become clear that CYPs exhibit both homotropic and heterotropic allosteric kinetics for many substrates. However, the mechanism of cooperative kinetics has not been established for any specific human CYP/substrate combination. Suggested mechanisms include binding of multiple substrates within distinct, static, subsites of a single large active site or binding of multiple substrates within a single fluid active site. CYP3A4 hydroxylates pyrene with positive cooperativity. Therefore, experiments were designed to exploit the fluorescence properties of pyrene, which diagnostically distinguish between pyrene.pyrene complexes versus spatially separated pyrene substrates. Pyrene complexes (excimers) yield an emission spectrum clearly distinct from pyrene monomers. In lipid-free aqueous/glycerol solutions of CYP3A4, addition of pyrene affords a concentration-dependent low-spin to high-spin conversion of the CYP3A4 heme prosthetic group, indicating occupancy of the active site by pyrene. Under the same conditions, in the presence of CYP3A4 but not other heme proteins, the excimer/monomer ratio (E/M) of pyrene was decreased in emission spectra, compared to pyrene alone. However, excitation spectra indicate a CYP3A4-dependent increase in the wavelength shift for the excimer excitation spectrum versus the monomer excitation spectrum, as well as changes in the excimer excitation peak shape and vibronic structure. These changes are reversed by the CYP3A4 substrate testosterone. Together, the results demonstrate that pyrene.pyrene ground-state complexes occupy the CYP3A4 active site, and they provide the first spectroscopic evidence for substrate complexes within a single fluid active site. Functional implications include the possibility that turnover rate, regioselectivity, and stereoselectivity of the reaction are determined by the substrate.substrate complex rather than individual substrates.     

A fluoride-selective PCT chemosensor based on formation of a static pyrene excimer

[reaction: see text] Calixarene-based fluorescent chemosensor 1 with two fluorogenic pyrene units conjugated to amide groups as guest recognition sites is synthesized. Complexation of F(-) by 1 causes a red shift of its absorption band to 400 nm (Deltalambda = 54 nm) and a blue shift of the excimer emission to 470 nm (Deltalambda = 12 nm) together with enhanced fluorescence intensity. The blue-shifted excimer emission is attributed to a pyrene dimer formed in the ground state, a so-called static excimer.     

The absorption spectrum of the pyrene excimer obtained by modulation excitation spectrophotometry

A well resolved spectrum has been obtained for the pyrene excimer in deoxygenated cyclohexane using modulation excitation spectrophotometry.     

Fluorescence quenching of pyrene monomer and excimer by CH3I

The fluorescence quenching rate constants of pyrene monomer and excimer by CH₃I were obtained at several temperatures in methylcyclohexane. Both quenching processes are kinetically controlled, allowing insight on the mechanism of quenching. The rate constants have both temperature-independent and temperature-dependent components. The temperature-independent component for both monomer and excimer fluorescence is consistent with quenching due to enhanced intersystem crossing to a lower energy triplet state. The monomer temperature-dependent component comes from the enhancement of the intersystem crossing to a higher energy triplet state. The thermally activated excimer quenching is associated with the excimer dissociation step to give a pyrene in a second triplet state plus a ground state pyrene molecule.     

Electric field effects on absorption and fluorescence spectra of trimethylsilyl- and trimethylsilylethynyl-substituted compounds of pyrene in a PMMA film

External electric field effects on absorption and fluorescence spectra of 1,3,6,8-tetrakis(trimethylsilyl)pyrene and 1,3,6,8-tetrakis(trimethylsilylethynyl)pyrene (TMSPy and TMS(E)Py, respectively) have been examined in a poly(methyl methacrylate) (PMMA) film at various concentrations at various temperatures. TMS(E)Py preferentially forms an aggregate in a PMMA film, as the concentration increases, indicating that the acetylenic groups enhance the pi-pi interactions between pyrene molecules. The change in molecular polarizability following excitation has been determined both for the monomer and for the aggregate, based on the electroabsorption spectra. The change in molecular polarizability following emission has also been determined in both compounds, based on the electrofluorescence spectra. TMSPy exhibits two excimer fluorescence emissions at high concentrations which are ascribed to the partially overlapping excimer and the sandwich-type excimer, respectively, besides the monomer fluorescence emitted from the locally excited state. The sandwich-type excimer fluorescence as well as monomer fluorescence is quenched by an electric field, whereas the fluorescence of the partially overlapping excimer is enhanced by an electric field. Excimer fluorescence of TMS(E)Py, which arises from the sandwich-type excimer, is quenched by an electric field at any temperature. Only one species of the partially overlapping excimer is confirmed in TMSPy, while no partially overlapping excimer is confirmed in TMS(E)Py.     

Resolution of ultrafast pyrene excimer emission rise times in zeolites X and Y

Pyrene has been a favorite photophysical probe molecule for zeolite research because of its ability to exhibit both monomer and excimer emission upon excitation. This study combines the use of ultrafast time-resolved fluorescence spectroscopy with steady-state fluorescence spectroscopy to study the excimer emission of pyrene incorporated within zeolites LiY, NaY, KY and NaX. The effects of sealing technique and coincorporated solvents are also explored. Pyrene excimer emission is resolvable with the use of an ultrafast streak camera under all conditions examined in this study with a rise-time range of 6.8 to 16.0 picoseconds. For each zeolite sample the addition of cosolvents decreases the rise time, with a greater decrease for polar solvents than for a nonpolar solvent. The presence of a detectable rise time for excimer emission indicates that pyrene excimer formation is a dynamic process when pyrene is embedded within the cavities of zeolite host materials.     

Unique blue shift due to the formation of static pyrene excimer: highly selective fluorescent chemosensor for Cu

New binaphthyl derivatives bearing pyrene groups have been synthesized and studied as fluorescent chemosensors for Cu²⁺ ions. A unique blue shift along with fluorescent enhancement in pyrene excimer emission was observed, which were induced by the formation of a static pyrene excimer.     

Label-free detection of polynucleotide single-base mismatch via pyrene probe excimer emission

The pyrene probe and pyrene-labeled oligonucleotides (ODNs) probe are expected to be candidates as fluorescent probe for DNA assay. In particular, label-free detection is a very hot because of its simpleness, speediness and cheapness. Herein, we have investigated the use of a pyrenylakylammonium salt, a novel fluorescent probe for the detection of one single nucleotide polymorphism (SNP) in double stranded DNA. After S1 nuclease digestion, the pyrene probes bind electrostatically to the perfect complement DNA and emit a strong excimer emission. However, treatment of the non-complementary DNA with S1 nuclease caused nucleotide fragments of less than 5 bases, which could not induce excimer emission. By comparing ratio of excimer to monomer fluorescence between normal and mutant DNA after S1 nuclease digestion, One-base mutation in DNA was detected easily. This new method may be applied to the detection of SNP.     

Guest-responsive excimer fluorescence of β-cyclodextrin bearing a pendant group with two pyrene moieties

β-Cyclodextrin derivative 1 , bearing a group with two pyrene moieties, exhibits predominant excimer emission in a 20% DMSO aqueous solution. In spite of the fact that pyrene is too large to be included in the β-cyclodextrin cavity and consequently both pyrene moieties are located outside the cavity, 1 varies the excimer emission intensity through the formation of inclusion complexes with guest species, thus acting as a chemosensor for molecular recognition.     

Fast transfer process of pyrene between oil-in-water miniemulsion droplets

Recently phase formation mechanisms have been estimated by using various fluorescent probes. In this report, the mixing process between internal phases of oil-in-water miniemulsions is discussed for two-dimensional color graphics data (two-dimensional fluorescence images) based on the excimer formation of pyrene as a hydrophobic fluorescent probe. Just after miniemulsion solution B (water, oil, and nonionic surfactant) was gradually added to miniemulsion A (water, oil, surfactant, and trace amount of pyrene) with gentle and careful stirring, the fluorescence spectra and the two-dimensional image of pyrene were measured. The decreasing of the excimer peak of pyrene was observed as soon as miniemulsion solution B was added. The result showed that pyrene initially located in miniemulsion droplets was smoothly diluted by the addition of miniemulsion droplets which contain only oil in the internal phase. The internal phases of miniemulsion droplets are miscible without changing the droplet diameter, and it is declared that pyrene transfers smoothly to the interface between droplets stabilized by the nonionic surfactant because the droplet diameter showed no significant difference throughout this mixing process. Received: 7 December 1999 Accepted: 11 April 2000     

Molar absorption coefficient of pyrene aggregates in water

The molar absorption coefficient of pyrene aggregates, epsilon(E0), was determined for a series of pyrene-labeled poly(N,N-dimethylacrylamide)s (Py-PDMA) having different pyrene contents. Aqueous solutions of Py-PDMA having pyrene contents ranging from 263 to 645 mumol of pyrene per gram of polymer were studied by UV-vis absorbance and time-resolved fluorescence spectroscopy. The global analysis of the monomer and excimer fluorescence decays with the fluorescence blob model yielded the fractions of the overall absorption contributed by all the pyrene species present in solution. The combined knowledge of the fractions obtained from the global analysis of the time-resolved fluorescence decays, the total absorption of the Py-PDMA solution obtained from UV-vis spectroscopy, and the total pyrene concentration in the solution obtained from the known pyrene content of each Py-PDMA sample led to the determination of the molar absorption coefficient of pyrene aggregates. Regardless of the pyrene content of the Py-PDMA samples and hence the level of association of the pyrene pendants in solution, all Py-PDMA samples yielded similar epsilon(E0) values over the range of wavelengths studied, namely, from 325 to 350 nm. The averaged epsilon(E0) was found to be red-shifted relative to unassociated pyrenes by 3 nm as well as having a value at the 0-0 peak of 21 000 M(-1).cm(-1) reduced from 34 700 M(-1).cm(-1) for unassociated pyrenes. The determination of epsilon(E0) enabled the first determination of the absolute fraction of associated pyrenes for aqueous solutions of a series of pyrene-labeled water-soluble polymers. The procedure outlined in this study is applicable to any pyrene-labeled water-soluble polymer and provides a new means to study quantitatively the effect of the hydrophilic-to-lipophilic balance on the hydrophobic associations generated by hydrophobically modified water-soluble polymers. As an application, the average number of pyrenes involved in a pyrene aggregate generated by Py-PDMA in water is determined.     

Synthesis of ionic polyurethanes with pyrene rings: Spectral properties and fluorescence quenching study

Hydrophilic ionic polyurethanes with 4‐chloromethylphenylcarbamoyl‐1‐oxymethylpyrene located on the quaternary ammonium structure from a polymer based on poly(ethylene glycol), isophorone diisocyanate, and N‐methyldiethanolamine were prepared by a quaternization reaction, in which the amount of pyrene covalently attached to the polymeric backbone ranged from 1.14 to 19.82 mmol of fluorophore/100 g of polymer. It was interesting to compare the photoluminescence of the pyrene polyurethane carrying a few mole percent of pyrene moieties with that of a third polymer resulting from its subsequent quaternization with benzyl chloride up to a concentration of ionic groups as in the latter (quaternization degree = 14.15%). The process of excimer formation between the pyrene molecules attached to the ionic polyurethane was investigated in tetrahydrofuran (THF), dimethylformamide, film, and THF/H₂O to illustrate the expected differences in the polymer behavior compared with that of the starting pyrene derivative. The formation of aggregates or core–shell micelles was sustained by the fluorescence data, which indicated the existence of pyrene units in the ground state of the molecule, giving rise thus to an explanation for the high excimer‐to‐monomer intensity ratio. The fluorescence decay of pyrene polyurethanes in the presence of various concentrations of nitrobenzene used as a quencher was analyzed too when the fluorescence quenching in the polymer solution normally followed Stern–Volmer kinetics. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3945–3956, 2005     

Emission studies of pyrene solutions

Emission spectra of pyrene in hexane have been obtained over a temperature range (from 130 to 260 K) that has not been explored before for concentrations ranging from 10^?4 mole/? to 2 × 10^?2 mole/?. A conventional and new approximation which does not depend on the experimental set-up response functions has been used for evaluating pyrene excimer association energy W_DM and other pyrene parameters. In both methods W_DM agrees quite satisfactorlly, at all concentrations used, with that reported in the literature and obtained by other techniques. However, both approximation fail to yield the right values of the rate parameters at concentrations ? 2 g/?. This set the upper limit of sample solubility to be at C = 2g/? for our range of temperature. Furthermore, the new approximation can probably be used at higher concentration (for higher range of temperature) and even may be used for other organic molecules. There was also no difference in the ratio of the excimer (I_D) to monomer (I_M) quantum yields when an intense laser beam was used as a source of excitation rather than a super-pressure Hg-lamp. This suggested that the concentrations we used might not be large enough. As a result, the laser beam would not create enough density of excited molecules to affect the ratio of I_D/I_M.     

Chloride selective calix[4]arene optical sensor combining urea functionality with pyrene excimer transduction

A neutral 2-site chloride selective compound has been developed (3), based on a 1,3-alternate tetrasubstituted calix[4]arene providing a preorganized supramolecular scaffold. The resultant supramolecular cavity is among the first to combine urea functional groups bridged with single methylene spacers to pyrene moieties. It combines a naturally and synthetically proven H-bonding system with the elegant ratiometric fluorescent signaling properties of an intramolecular pyrene excimer system, triggered by conformational changes upon anion coordination. The excimer emission of 3 is quenched, with a simultaneous rise in the monomer emission solely by the chloride anion among a wide variety of anions tested. 3 has an association constant of 2.4 x 10(4) M(-1) with chloride. The suitability and advantages of ratiometric optical sensor compounds like 3 for use in practical sensor devices is discussed. 3 has an LOD of 8 x 10(-6) M with chloride in acetonitrile-chloroform (95:5 v/v). A dynamic fluorescence study revealed a response time of < 3 s. A recently developed and simple HPLC-based purification method complimented conventional organic work up methods to yield pure product.     

Immobilization of pyrene on quartz plate surface via a flexible long spacer and its sensing properties to dicarboxylic acids

It is known that polycyclic aromatic hydrocar-bons (PAHs) form excimer easily, and show both monomer and excimer emission in polar medium[1]. This character comes from their hydrophobic nature and plane structures. The ratio of the intensity of ex-cimer emission to that of monomer emission is a func-tion of distance between neighbouring PAHs in a sys-tem. It is not difficult to understand that many factors, such as the concentration of PAHs, temperature, pres-ence and concentration of othe…