{\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs20 A pseudo-isothermal kinetic analysis of the recrystallisation of nickel sulphide measured by non-isothermal DSC \par }

Summary A pseudo-isothermal method for the kinetic analysis was applied to the recrystallisation of to nickel sulphide based on the Ozawa model for non-isothermal crystallisation in the presence of pre-existing nuclei. The aim of the analysis was to determine the number of steps involved in the recrystallisation and, hence, determine the applicability of the kinetic equation based on a single step mechanism, as is commonly applied in the kinetic analysis of solid-state processes using thermal methods. The kinetic analysis yielded evidence of at least two processes indicating that physical and mechanistic significance should not be drawn from the use of a single step approximation of the rate equation.     

Two-Stage Kinetic Model for the α–β Phase Recrystallisation in Nickel Sulphide

Toughened glass panels used as a glazing material in multistorey buildings are known to fracture prematurely when they contain nickel sulfide inclusions as a result of the α-β phase recrystallisation in nickel sulfide. The kinetics of this recrystallisation were studied by differential scanning calorimetry (DSC) under isothermal and non-isothermal conditions. The recrystallisation was observed to be a two-step process with an induction period followed by the phase change. A two-stage kinetic model was used to estimate the recrystallisation time under ambient conditions. These values were found to correlate well with the observed time to failure for glass panels installed in multistorey buildings. This revised version was published online in July 2006 with corrections to the Cover Date.     

A simple model to explain the complex kinetic behavior of epoxy/anhydride systems

A survey of the literature dealing with the kinetics of epoxy/anhydride polymerizations initiated by tertiary amines, shows inconsistencies in results reported by several authors. Both first-order and autocatalytic expressions have been used to fit experimental results. In the former case, significantly different values of apparent activation energies were found in isothermal and nonisothermal experiments. A simple kinetic model is proposed to explain these inconsistencies, based on the following steps: (a) a reversible reaction transforming an inactive initiator species into an active one, (b) a propagation step, and (c) a chain transfer step regenerating the active initiator (step not relevant to the kinetic analysis). The simple model explains both the first-order and autocatalytic behaviors reported in the literature. It also leads to the experimental values of the apparent activation energies obtained under different conditions. It is also shown that isoconversional methods should not be applied to obtain fundamental kinetic parameters in systems where the reaction rate depends on the concentration of an active species that varies independently of the conversion of functional groups. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2799–2805, 1999     

等转化率法分析溶菌酶在添加剂影响下的热变性行为

利用差示扫描量热法(DSC)研究了溶菌酶在不同浓度的添加剂(蔗糖、葡萄糖、果糖、甘露醇)和不同浓度的磷酸盐缓冲液影响下的热变性过程,并用等转化率法对该过程进行了分析.变性温度Tm随扫描速率和添加剂浓度的增加而提高,随磷酸盐缓冲液浓度的增加而降低.磷酸盐加速了溶菌酶的变性过程,降低了溶菌酶的热稳定性,而添加剂则增强了溶菌酶的热稳定性.在添加剂存在的条件下,溶菌酶变性过程部分为聚集不可逆过程,部分则可逆.等转化率法表明溶菌酶在所有条件下,其表观活化能在不同的转化率下并未保持不变,而是随转化率增大而减小,说明了一个简单的反应机理并不能用来描述溶菌酶的变性过程,其过程并不是标准两态可逆过程,而是一个涉及多种蛋白质状态的复杂过程.     

Thermal Studies of Nickel(II) Squarate Complexes of Triamines in the Solid State

[NiL₂]C₄O₄·nH₂O [where n=2 when L=diethylenetriamine(dien) and N-(3-aminopropyl)-1,3-propanediamine (dpt); n=3 when L=N-(2-aminoethyl)-1,3-propanediamine (aepn); n=0 when L=N²-methyldiethylenetriamine (medien)] and Ni(tmdien)C₄O₄·2H₂O (where tmdien=1,4,7 trimethyl-diethylenetriamine) have been synthesised and investigated thermally in the solid state. Ni(dpt)C₄O₄·H₂O has also been synthesised pyrolytically in the solid state from the corresponding bis complex. All the complexes possess octahedral geometry. The squarate anion takes part in coordination only in monotriamine species. [Ni(medien)₂]C₄O₄ upon heating undergoes phase transition (270–285°C; ΔH=4.9 kJ mol⁻¹) accompanied by colour change pink to grey. Thermal stability decreases with increase in chain length of the triamines. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal Decompositions of the Molybdotellurates of Nickel(II) and Cobalt(II)

Molybdotellurates [M(H₂O)₆]₃·[TeMo₆O₂₄], with M=Ni(II) and Co(II), were synthesized and characterized by single-crystal X-ray diffraction for compound 1 and X-ray powder diffraction for compound 2, EDAX, IR, electronic spectra in the solid phase and in solution, and magnetic properties. Thermogravimetry and differential scanning calorimetry of both compounds revealed a loss of 11 water molecules through an endothermal process with ΔH=800 kJ mol⁻¹ for the nickel compound and ΔH=833 kJ mol⁻¹ for the cobalt compound. The residual compounds were characterized by chemical analysis, IR and XPS spectroscopy This revised version was published online in July 2006 with corrections to the Cover Date.     

Critical Analysis of the Isoconversional Methods for Evaluating the Activation Energy. II. The activation energy obtained from isothermal data corresponding to two successive reactions

An analysis is presented of the consequences of the use of a one term equation containing apparent activation parameters, instead of the true rate equation to describe two successive decomposition reactions undergone by a solid compound. It is demonstrated that the apparent activation energy, obtained by means of isoconversional differential and integral methods, varies with the conversion degree for a relatively narrow temperature range and with temperature at a given value of the conversion degree. The activation energy values obtained with the isoconversional differential method are higher than the corresponding values obtained with the isoconversional integral method. This revised version was published online in August 2006 with corrections to the Cover Date.     

Hoffman-Lauritzen parameters for non-isothermal crystallization of poly(ethylene terephthalate) and poly(ethylene oxide) melts

Summary By applying an advanced isoconversional method to DSC data one can evaluate a dependence of the effective activation energy (the temperature coefficient of the growth rate) on the relative extent of melt crystallization. The conversion dependence can further be converted into a temperature dependence and parameterized in terms of the Hoffman-Lauritzen equation. For poly(ethylene terephthalate) (PET) we observe a transition from regime I to II. Poly(ethylene oxide) (PEO) crystallization appears to begin in regime II and then undergoes 2 consecutive changes that however cannot be clearly interpreted as regime III. The K_g and _e parameters obtained for regime I and II (PET) and regime II (PEO) are consistent with the respective parameters reported for isothermal crystallization.     

Thermal Analysis Studies on Isopropylnitrate

Isopropylnitrate (IPN) is described as a detonable material used in propellants and explosives. While there is considerable information available on its sensitivity and compatibility with other materials, very little is known about its thermochemical properties. This paper will describe the results obtained from some DSC, heat flux calorimetry (HFC) and accelerating rate calorimetry (ARC) measurements. The ASTM DSC method using a hermetic aluminum pan having a lid with a laser-produced pin hole was used to determine the vapour pressure of IPN₁. Results calculated from an Antoine equation are in substantial agreement with those determined from DSC measurements. From the latter measurements, the enthalpy of vaporization was determined to be 35.32±0.62 kJ mol⁻¹. Attempts to determine vapour pressures above about 0.8 MPa resulted in significant decomposition of IPN_g. The enthalpy change for decomposition in sealed glass systems was found to be -3.43±0.09 kJ g⁻¹ and -3.85±0.03 kJ g⁻¹, respectively from DSC and HFC measurements on IPN₁ samples loaded in air. Slightly larger exotherms were observed for the HFC results in air than those in inert gas, suggesting some oxidation occurs. In contrast, no significant difference in the observed onset temperature of about 150°C was observed for both the HFC and ARC results. From DSC measurements, an Arrhenius activation energy for decomposition of 126±4 kJ mol⁻¹ was found. These measurements were also conducted in sealed glass systems and decomposition appeared to proceed primarily from the liquid phase. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal decomposition of nicotinate complexes of cobalt and nickel in dynamic nitrogen atmosphere

Thermal decomposition of cobalt and nickel nicotinate was studied by TG, DTG and DSC. The mechanism of decomposition has been established from TG and DSC data. The kinetic parameters namelyE, A together with ΔH were calculated from DSC curves using mechanistic and non-mechanistic integral equations.

---

Zusammenfassung Mittels TG, DTG und DSC wurde die thermische Zersetzung von Cobaltund Nickelnikotinat untersucht. Der Zersetzungsmechanismus wurde anhand der TG-und DSC-Daten entwickelt. Die kinetischen ParameterE, A wurden zusammen mit ΔH anhand der DSC-Kurven mit Hilfe von mechanistischen und nichtmechanistischen Integrationsgleichungen berechnet.

     

Critical Analysis of the Isoconversional Methods for Evaluating the Activation Energy. I. Theoretical background

It is demonstrated that, if the activation energy depends on the degree of conversion, its values obtained by isoconversional differential and integral methods are different. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal decomposition kinetics of some aromatic azomonoethers

Thermal analysis of three azomonoether dyes, exhibiting liquid-crystalline properties, was performed in dynamic air atmosphere. Thermal stability studies and the evaluation of the kinetic parameters of each physical or chemical transformations are essential for a full characterization, before attempting accurate thin films’ depositions of such materials used in non-linear optical applications. New synthesized dyes with general formula: where R is a nematogenic group: CN, CF₃ or a highly polarizable group: NO₂ were investigated using TG, DTG, DTA and DSC techniques, under non-isothermal regime. The evolved gases were analyzed by FTIR spectroscopy. The activation energies of the first decomposition step were evaluated for each compound, the obtained results revealing complex mechanisms.     

Thermal Treatment of Sol-Gel Derived Nickel Oxide Xerogels

Very fine nickel hydroxide and oxide xerogel powders were prepared using a new sol-gel synthesis procedure in which nickel ethoxide was produced through the reaction of nickel chloride, as a precursor, with sodium ethoxide in dehydrated ethanol, followed by the hydrolysis of nickel ethoxide with ammonia and drying the resulting hydrogel under subcritical pressures to form the xerogel. The effects of thermal treatment on the surface area, pore volume, crystallinity and particle structure of the resulting xerogels were investigated and found to have significant effects on all of these properties. Overall, the xerogel remained amorphous as Ni(OH)₂ space up to 200°C, with little change in the surface area and pore volume. At 250°C, the Ni(OH)₂ began to decompose and form crystalline NiO with the uniformity of the crystals increasing with an increase in temperature. The surface area and pore volume decreased sharply when increasingthe temperature beyond 250°C; this was the temperature where maximums of about 270 m²/g and 0.33 cm³/g were exhibited by this composite amorphous Ni(OH)₂ and crystalline NiO xerogel powders. At the higher calcination temperatures, very uniform NiO crystals with average crystallite sizes of 1.7 nm and 14.5 nm were obtained at 400 and 600°C, respectively.     

Studies on the electrochemical and thermodynamic behaviour of Hg-HgS electrode in the presence of sulphide ions

Mercury-mercury (II) sulphide electrode has been prepared and its electrochemical and thermodynamic behaviour has been studied in different media. The electrode is found to show Nernstian response to pS (− log [S²⁻]) over the range 5.19–10.38. In the pH range 7.96–11.98, at constant [S²⁻]_v, its response is also Nernstian. The values of thermodynamic functions, viz., ΔG⁰. ΔH⁰, and ΔS⁰ for the electrode reaction: Hg₍₃)+S²⁻ _aμ ⇌HgS_(s)+2e, have been determined. Further, the standard free energy of formation (ΔG _f ⁰ ) and solubility product constant (K _vp ) of HgS in aqueous medium at 25±0.1°C have also been determined.     

Thermal Studies on Energetic Compounds

The nitrate complexes of copper, nickel and zinc with diethylenetriamine (dien) i.e. [Cu(dien)₂](NO₃)₂, [Ni(dien)₂](NO₃)₂·2H₂O and [Zn(dien)₂](NO₃)₂ have been prepared and characterised. Thermal studies were undertaken using TG-DTG, DSC, ignition delay (t _id) and ignition temperature (IT) measurements. Impact sensitivity was measured using drop mass technique. The kinetic parameters for both non-isothermal and isothermal decomposition of the complexes were evaluated by employing Coats-Redfern (C-R) method and Avrami-Erofeev (A-E) equations (n=2 and 3), respectively. The kinetic analysis, using isothermal TG data, was also made on the basis of model free isoconversional method and plausible mechanistic pathways for their decomposition are proposed. Rapid process was assessed by ignition delay measurements. All these complexes were found to be insensitive towards impact of 2 kg mass hammer up to the height limit (110 cm) of the instrument used. The heat of reaction (?H) for each stage of decomposition was determined using DSC.     

Critical Considerations on the Isoconversional Methods. III. On the evaluation of the activation energy from non-isothermal data

The differential and integral isoconversional methods for evaluation the activation energy, described in the first note of this series, were applied for: a) simulated data for two successive reactions; b) dehydration of calcium oxalate monohydrate. It was shown that for these systems the activation energy depends on the conversion degree as well as on the method of evaluation. This revised version was published online in August 2006 with corrections to the Cover Date.     

镀镍液中镍的在线分析研究

基于硫酸镍溶液的光谱吸收特征,采用双波长双通道流动注射分光光度法测定镀镍液中镍的含量。借助计算机控制,实现了镀镍液中镍的在线分析,能满足生产工艺分析的要求。     

The kinetics of thermo-oxidative humic acids degradation studied by isoconversional methods

Humic acids represent a complicated mixture of miscellaneous molecules formed as a product of mostly microbial degradation of dead plant tissues and animal bodies. In this work, lignite humic acids were enriched by model compounds and the model-free method suggested by Šimon was used to evaluate their stability over the whole range of conversions during the first thermooxidative degradation step. The kinetic parameters obtained were used to predict the stability at 20 and 180°C, respectively, which served for the recognition of processes induced by heat and those naturally occurring at lower temperatures. Comparison of the conversion times brought a partial insight into the kinetics and consequently into the role of individual compounds in the thermooxidative degradation/stability of the secondary structure of humic acids. It has been demonstrated that aromatic compounds added to humic acids, except pyridine, increased stability of humic acids and intermediate chars. The same conclusion can be drawn for acetic and palmitic acids. Addition of glucose or ethanol decreased the overall humic stability; however, the char of the former showed the highest stability after 40% of degradation.     

Variation of the Effective Activation Energy Throughout the Glass Transition

Summary: An advanced isoconversional method has been applied to determine the effective activation energies (E) for the glass transition in polystyrene (PS), poly(ethylene terephthalate) (PET), and boron oxide (B₂O₃). The values of E decrease from 280 to 120 kJ · mol⁻¹ in PS, from 1 270 to 550 kJ mol⁻¹ in PET, and from 290 to 200 kJ mol⁻¹ in B₂O₃. It is suggested that a significant variation in E should be observed for the fragile glasses that typically include polymers.

Variation in the effective activation energy of PS, PET, and B₂O₃ with temperature.     

Isoconversional Approach to Evaluating the Hoffman–Lauritzen Parameters (U* and Kg) from the Overall Rates of Nonisothermal Crystallization

Summary: An equation has been derived that correlates the temperature coefficient of the growth rate with the temperature dependence of the effective activation energy of the overall crystallization rate, which can be measured by differential scanning calorimetry. The dependence is evaluated by using an advanced isoconversional method and is parameterized in terms of the Hoffman–Lauritzen equation. The parameters obtained for the nonisothermal crystallization of the poly(ethylene terephthalate) melt are consistent with the parameters reported for isothermal crystallization.

The fit of the equation derived here is shown for data corresponding to the dependence of the effective activation energy on average temperature (fit = solid line).