High-performance liquid chromatographic separation of polyolefin antioxidants and light-stabilisers

Summary A scheme was devised for the identification of 22 common antioxidants and light-stabilisers in polyolefins. The separation of these stabilisers was performed by isocratic reversed phase high-performance liquid chromatography on a RP-18 column. Three different separation conditions have been used: the mobile phase composition was 100% acetonitrile (MeCN), 90/10 meCN/H₂O and 80/20 MeCN/H₂O. The UV₂₅₄/UV₂₈₀ ratio and the elution time of each stabiliser were determined for these three mobile phase compositions. The values of UV₂₅₄/UV₂₈₀ ratios may be used together with the retention time values for the identification of unknown stabilisers in polyolefin samples.     

Analysis of Flavonoids in Silybum marianum Fruit by HPLC

Flavonoids of spotted milkweed (Silybum marianumL. Gaerth.) were optimally separated using reverse-phase HPLC with isocratic elution by CH ₃ CN-H ₂ O over Separon SGX C ₁₈ . The flavolignans silybin, silydianin, silychristin, and the flavonoid taxifolin were identified in the chromatograms of extracts from this plant     

Ruthenium catalysed oxidation without CCl4 of oleic acid, other monoenic fatty acids and alkenes

Ruthenium catalysed oxidation of alkenes and monoenic fatty acids is reported. The study of the influence of cosolvents (H₂O/MeCN/X) shows that toxic CCl₄ initially used in the Sharpless system (H₂O/MeCN/CCl₄) can be avoided and demonstrates that the oxidative cleavage of CC bond could be accomplished in good yields with H₂O/MeCN/AcOEt solvent system in a ratio 3/2/2, respectively.     

One-Pot Conversion of Alkenes into Oxazolines and Oxazolidin-2-Ones Promoted by Diphenyl Diselenide

Abstract: Abstract. Oxazolines or oxazolidin-2-ones are produced from the reaction of diphenyl diselenide, ammonium persulfate and trifluoromethanesulfonic acid with alkenes in the presence of MeCN/H₂O, NH₂CN/H₂O or NH₂CO₂Et.     

Determination of traces of lanthanides in cerium oxide by liquid chromatography with on-column preconcentration

Summary Traces of lanthanides can be effectively separated from other lanthanides in major concentrations and other elements by liquid chromatography on a column of Separon SGX C18 silica gel modified by sorption of ammonium dodecylsulphate or ammonium octanesulphonate and determined spectrophotometrically with Arsenazo III. Isocratic or stepwise acidity gradient elution with 90 mmol/l of ammonium 2-hydroxy-2-methylpropionate (HIBA) or 60 mmol/l of ammonium citrate was used. Interferences by the elements up to 10³–10⁴ concentration ratio can be eliminated. Lanthanides at mg/g level can be determined in cerium oxide with a relative standard deviation s_r<2.5% (n=5).     

Retention and Thermodynamic Studies of Piperazine Diastereomers in Reversed-Phase Liquid Chromatography

The effect of organic modifier concentration on retention and selectivity of two piperazine diastereomers in a typical n-octadecyl-bonded silica (ODS) column was investigated at pH 6.4 and pH 3.0 using phosphate-buffered acetonitrile (MeCN/H₂O) and methanol (MeOH/H₂O) mobile phases. The results show the logarithmic retention factors decrease with increasing organic concentration in a less rectilinear fashion in the MeCN/H₂O system than in the MeOH/H₂O system at high organic concentrations at both pHs. At pH 6.4, the MeOH/H₂O system provided significantly higher diastereomer selectivity than the MeCN/H₂O system, which can be ascribed to the hydrogen bonding interaction of methanol (as a hydrogen donor) with the piperazine amine moiety of the solute (as a hydrogen acceptor). At pH 3.0, both mobile phases provided high selectivity, in which both acetonitrile and methanol acted as hydrogen acceptors, while the protonated amine acted as the hydrogen donor. The effect of temperature on retention and selectivity was also studied in the two mobile phase systems at both pHs. It was found that at pH 6.4 the retention and selectivity were enthalpically driven in the MeOH/H₂O system, while entropically driven in the MeCN/H₂O system. However, the retention was entropically driven and the selectivity enthalpically driven in both systems at pH 3.0. Locally preferential solvating and hydrogen bonding effects are proposed to explain the anomalous retention and selectivity behaviors.     

Studies on highly regio- and stereoselective fluorohydroxylation reaction of 3-aryl-1,2-allenyl phosphine oxides with Selectfluor

The fluorohydroxylation of allenyl phosphine oxides with Selectfluor in commercial MeCN without prior treatment or a mixed solvent of anhydrous MeCN (refluxed over CaH₂ and distilled before use) and 7.0 equiv of H₂O or MeNO₂/H₂O=10/1 afforded 2-fluoro-3-hydroxy-1(E)-alkenyl diphenyl phosphine oxides in moderate yields with very high regio- and stereoselectivities. The E-stereoselectivity is believed to be controlled by the phosphine oxide functionality. In the reaction of 3-(4-methoxyphenyl)-1,2-propadienyl diphenyl phosphine oxide, further fluorination on the electron-rich phenyl ring was also observed.     

Physicochemical Properties of a New Multicomponent Cosolvent System for the pKa Determination of Poorly Soluble Pharmaceutical Compounds

A mixture of cosolvents is described that significantly improves the solubility of most pharmaceutical compounds. The mixture consists of equal volumes of MeOH, 1,4‐dioxane, and MeCN, thereby containing polar and nonpolar solvents, and is referred to as MDM (from MeOH, dioxane, and MeCN). MDM is mixed with H₂O until the required composition is reached. The utility of this system is that it enables analytical measurements to be performed on a wide range of compounds where measurements would be impaired in aqueous solution. We present the physicochemical characteristics of MDM/H₂O mixtures (density, dielectric constant, p_sK_w) and the principles of pK_a measurement in this solvent/H₂O mixture. We also present pK_a values in H₂O of several drug compounds determined from values measured in MDM/H₂O mixtures.     

ATP Sensing with Anthryl‐Functionalized Open‐Chain Polyaza‐alkanes

The anthryl‐functionalized open‐chain polyaza‐alkanes L ¹ , L ² , and L ³ have been synthesized, and their activity as fluorescent chemosensors has been studied in MeCN/H₂O 70 : 30 (v/v) and H₂O at 25° against the anions bromide, phosphate, sulfate, ATP, ADP, and GMP. The crystal structure of L ³ has been solved by single‐crystal X‐ray‐diffraction techniques. The emission intensity of L ¹ and L ² is selectively quenched in the presence of ATP at acidic pH in MeCN/H₂O 70 : 30 (v/v). In H₂O, the emission intensity of L ¹ and L ² is enhanced at neutral pH in the presence of ADP and ATP. The sensing behavior is discussed in terms of H‐bonding or electrostatic anion‐cation interactions. Receptor L ³ does not show any significant change in fluorescence emission upon addition of anions. Protonation constants of the three ligands and stability constants of L ² with phosphate and sulfate were determined by potentiometric titration in MeCN/H₂O. The stability constants obtained are compared with those obtained for the interaction of these anions with related open‐chain polyamines.     

Influence of injection parameters on column performance in nanoscale high-performance liquid chromatography

Summary The influence of the injection volume and the sample solvent on column efficiency has been evaluated in packed nano liquid chromatography using columns 150μ i.d. Evaluation of column performance was by means of reduced plate height (h) versus reduced velocity (v) for four polyaromatic hydrocarbon test compounds (PAHs). When compounds are dissolved in a weak solvent (such as MeCN: H₂O, 30∶70), and whatever the injection volume −60 or 200 nL-a gain in efficiency can be observed due to the well-known on-column focusing phenomenon, but keeping constant solute retention factors. Under optimized conditions (flow rate: 150 nLmin⁻¹, solvent sample MeCN: H₂O, 30∶70, injection volume 200 nL), a reduced plate height of 1.83 has been obtained for a 15 μm C₁₈ packing corresponding to 36000 plates m⁻¹, which illustrates the absence of any extracolumn band broadening under nano LC conditions.     

Photolabile Protecting Groups for Nucleosides: Mechanistic Studies of the 2‐(2‐Nitrophenyl)ethyl Group

The photochemistry of several 2‐(2‐nitrophenyl)ethyl‐caged compounds including caged thymidine nucleosides was studied by nanosecond laser flash photolysis and stationary illumination experiments with quantitative HPLC analysis for quantum yields and product distribution. Effects of solvent basicity and acidity were investigated by varying the H₂O content and HCl concentration, respectively, in MeCN/H₂O mixtures. For all compounds 1 – 7 investigated, intramolecular H abstraction by the nitro group from the exocyclic α‐position with respect to the aryl moiety was found to be the primary process. The protolytic dissociation equilibrium of the resulting aci‐nitro compound was kinetically characterized in the 0.1 – 10 μs time region. In general, two reaction channels compete for the aci‐nitro compound and its anion: β‐elimination of the caged compound occurs from the anion, while from the undissociated aci‐nitro compound, a nitrosobenzene derivative is formed with no release of the caged compound. The yield ratio of these two reaction channels can be controlled through shifts in the protolytic dissociation equilibrium of the aci‐nitro compound. In solutions with either low basicity (H₂O‐free MeCN) or high acidity (higher concentration of HCl in H₂O/MeCN), two as yet unidentified products are formed, each one specifically for one of the mentioned conditions.     

Photochemical water reduction by molybdenum tetrachloride

The photolysis of MoCl₄(MeCN)₂ in MeCN in the presence of small amounts of H₂O proceeds according to the equation Mo^IVCl₄·H₂OMo^VIOCl₄ + H₂. It is suggested that a ligand field excited state of MoCl₄(H₂O) _n , which is initially populated by light absorption, is deactivated to a reactive metal-to-ligand (Mo^IVH₂O) charge transfer state.     

Development and Validation of Nonaqueous Capillary Electrophoresis Method for Simultaneous Estimation of Icariin,Icariside II,and Epimedin K in Epimedium Leaves

This paper describes a novel nonaqueous capillary electrophoresis method for the separation and determination of Icariin, Icariside II, and Epimedin K in Epimedium leaves. Three flavonoids were extracted by ultrasonication with EtOH-H₂O (70:30) followed by a HP 20 resin column cleanup procedure. The optimized electrophoretic conditions were obtained with the running solution of 8 mM borate MeCN/H₂O (60:40, v/v) (pH 11.40), separation voltage of +20 kV and detection wavelength of 270 nm. The limits of quantification ranged from 0.24 to 0.84 mg/kg (signal/noise = 3) for three flavonoids. Three flavonoids in 10 Epimedium leaves were successfully measured and evaluated.     

C-S bond cleavage of 2-methoxythiophene by Ir-TMEDA complex (TMEDA = N,N,N’,N’-tetramethylethylenediamine). Formation of novel dinuclear iridathiacyclohexenyl complex

The Ir-TMEDA complex [Ir(C₂H₄)₂(TMEDA)(MeCN)][BF₄] (TMEDA = Me₂NCH₂CH₂NMe₂) was treated with 2-methoxythiophene in MeCN at 70 °C in the presence of H₂O to afford the novel dinuclear iridathiacyclohexenyl complex [Ir₂{C(OMe)CHCHCH(CMeNH)S}(MeCONH)(TMEDA)₂][BF₄]₂ in 42% yield, in which two Ir(TMEDA) fragments, one 2-methoxythiophene, and two MeCN molecules are incorporated together with one H₂O molecule. The mechanism that involves the insertion of the Ir center into the thiophenic S-C(OMe) bond followed by the π-coordination of the second Ir center to the thiametallacycle has been proposed.     

Identification of the cobalt(II) chloride ‘mixed’ solvate Co4Cl8(H2O)4(MeCN)6: the ionic structure trans-[Co(H2O)2(MeCN)4] trans-[Co(H2O)2(MeCN)2(CoCl4)2]

The structure of the title compound features mononuclear octahedral Co^II cations, trans-[Co(H₂O)₂(MeCN)₄]²⁺, and trinuclear anions, trans-[Co(H₂O)₂(MeCN)₂(CoCl₄)₂]^2–; the latter centrosymmetric units contain a central octahedral Co(H₂O)₂(MeCN)₂ moiety with two tetrahedral [CoCl₄]^2– ligands. These two large ions are held in a network of intra- and inter-molecular hydrogen bonding.     

Determination of Triandrin and Salicin in Salix viminalis L. by Reversed-Phase High-Performance Liquid Chromatography

The optimal separation of phenolic components of the bark of basket willow Salix viminalis L. was attained using reversed-phase high-performance liquid chromatography with isocratic elution. Triandrin (1-O--D-glucopyranoside of p-coumaryl alcohol) and salicin (1-O--D-glucopyranoside of salicyl alcohol) were identified. Regularities in the retention of triandrin and salicin in the Separon SGX C₁₈–binary mobile phase (acetonitrile–water) system were considered. A procedure was developed for the quantitative determination of triandrin in raw basket-willow bark and its extract.     

Aminolysis of 2,4-dinitrophenyl X-substituted benzoates and Y-substituted phenyl benzoates in MeCN: effect of the reaction medium on rate and mechanism

Second‐order rate constants (k_N) have been determined spectrophotometrically for the reactions of 2,4‐dinitrophenyl X‐substituted benzoates ( 1 a – f ) and Y‐substituted phenyl benzoates ( 2 a – h ) with a series of alicyclic secondary amines in MeCN at 25.0±0.1 °C. The k_N values are only slightly larger in MeCN than in H₂O, although the amines studied are approximately 8 pK_a units more basic in the aprotic solvent than in H₂O. The Yukawa–Tsuno plot for the aminolysis of 1 a – f is linear, indicating that the electronic nature of the substituent X in the nonleaving group does not affect the rate‐determining step (RDS) or reaction mechanism. The Hammett correlation with σ^? constants also exhibits good linearity with a large slope (ρ_Y=3.54) for the reactions of 2 a – h with piperidine, implying that the leaving‐group departure occurs at the rate‐determining step. Aminolysis of 2,4‐dinitrophenyl benzoate ( 1 c ) results in a linear Brønsted‐type plot with a β_nuc value of 0.40, suggesting that bond formation between the attacking amine and the carbonyl carbon atom of 1 c is little advanced in the transition state (TS). A concerted mechanism is proposed for the aminolysis of 1 a – f in MeCN. The medium change from H₂O to MeCN appears to force the reaction to proceed concertedly by decreasing the stability of the zwitterionic tetrahedral intermediate (T^±) in aprotic solvent.     

Studies on the highly regio- and stereoselective selenohydroxylation of 1,2-allenylic sulfoxides with PhSeCl

The selenohydroxylation of 1,2-allenyl sulfoxides with PhSeCl in MeCN/H₂O (10/1) afforded E-3-hydroxy-2-phenylseleno-1-alkenyl sulfoxides in good yields and high regio-/stereoselectivities.     

基于多齿希夫碱配体的四核和十核锰簇合物的合成、结构和磁性

合成了一种具有{NO₄}给电子组成的多齿水杨醛希夫碱配体,3,5-二-叔丁基水杨醛-三(羟甲基)氨基甲烷(H₄L),并利用元素分析、红外光谱以及核磁共振氢谱表征其结构。Mn(ClO₄)₂或MnCl₂·4H₂O分别与该配体在溶液中反应生成了一个四核锰簇合物[Mn^III₄(HL)₂(H₂L)₂(MeCN)₄](ClO₄)₂·2MeCN(1)和一个十核锰簇合物[Mn^III₆Mn^II₄(bz)10(L)₄(H₂O)₂]·10MeCN(2)。X-射线衍射分析表明化合物1的晶体结构空间群为三斜P1,而化合物2为正交Aba2。2~300 K温度区间的磁性测量数据表明化合物2中存在反铁磁相互作用。     

Tris(1H‐benzimidazol‐2‐yl­meth­yl)­amine–solvent adducts

The tris­(1H‐benzimidazol‐2‐yl­meth­yl)­amine (ntb) mol­ecule crystallizes in different solvent systems, resulting in two kinds of adduct, namely the monohydrate, C₂₄H₂₁N₇·H₂O or ntb·H₂O, (I), and the acetonitrile–methanol–water (1/0.5/1.5) solvate, C₂₄H₂₁N₇·C₂H₃N·0.5CH₄O·1.5H₂O or ntb·1.5H₂O·0.5MeOH·MeCN, (II). In both cases, ntb adopts a tripodal mode to form hydrogen bonds with a solvent water mol­ecule via two N—H⋯O and one O—H⋯N hydrogen bond. In (I), the ntb·H₂O adduct is further assembled into a two‐dimensional network by N—H⋯N and O—H⋯N hydrogen bonds, while in (II), a double‐stranded one‐dimensional chain structure is assembled via N—H⋯O and O—H⋯O hydrogen bonds, with the acetonitrile mol­ecules located inside the cavities of the chain structure.