A Stability-Indicating Assay of Brimonidine Tartrate Ophthalmic Solution and Stress Testing Using HILIC

A stability-indicating hydrophilic interaction liquid chromatography (HILIC) method has been developed and validated for the quantitative determination of Brimonidine tartrate (BT) formulated as an ophthalmic solution. Isocratic separation was achieved using an acetonitrile-buffer mixture (92:8, v/v) at pH 7.1 on an unmodified silica column (250 × 4.6 mm, 5 μm). The drug was subjected to oxidative, hydrolytic, photolytic and thermal stress conditions and complete separation was achieved for the parent compound and degradation products. The influence of acetonitrile, pH and ionic strength of the buffer was studied. Linearity range and recoveries for BT were 100–400 μg mL^?1 and 100.12%, respectively. The method was validated for BT and indicated that the method was sufficiently sensitive with a limit of detection at 0.005 μg mL^?1 and a limit of quantitation at 0.02 μg mL^?1, respectively.     

Development and Validation of a Novel Gradient LC Method for Simultaneous Determination of Isoniazid and Acetylisoniazid in Human Plasma

The goal of this study was to develop and validate a new gradient high-performance liquid chromatography method for the simultaneous determination of isoniazid (INH) and acetylisoniazid (Ac-INH) in human plasma samples. A C18 reversed-phase column was employed for separation followed by UV detection at 266 nm. The calibration involved the use of five concentration levels ranging from 1 to 20 μg mL^?1 for both analytes. The developed method was validated using ICH guidelines. The calibration curve was found to be linear with correlation coefficient values (r ²) above 0.9991 and the highest RSD% values for intra-day assays were found to be 6.34 and 2.57% for INH and Ac-INH, respectively. The highest RSD% values for inter-day assays were 9.31 and 10.17% for INH and Ac-INH, respectively. LOD was calculated to be 0.1 and 0.15 μg mL^?1 for INH and Ac-INH, respectively. LOQ was calculated to be 0.33 and 0.5 μg mL^?1 for INH and Ac-INH, respectively.     

CE, with Hydroxypropyl-β-Cyclodextrin as Chiral Selector, for Separation and Determination of the Enantiomers of Amlodipine in the Serum of Hypertension Patients

A capillary electrophoretic method for separation of the enantiomers of amlodipine in the serum of hypertension patients has been established and validated. The two enantiomers were separated in a fused-silica capillary with phosphate running buffer (75 mmol L^?1, pH 2.5) containing 15 mmol L^?1 hydroxypropyl-β-cyclodextrin (HP-β-CD). The effects on the separation of buffer pH and concentration, separation potential, and concentration of HP-β-CD were investigated. The range of quantitation for both enantiomers was 2.0–16.0 μg mL^?1. Intra-day and inter-day relative standard deviation (RSD; n = 5) was <10%. The limits of detection (LOD) and quantification (LOQ) of the amlodipine enantiomers, at 214 nm, were approximately 0.5 and 0.7 μg mL^?1, respectively (S/N = 3 and 10, respectively; 5-s injection). Recovery was always >85%. Results from enantiomer separation and quantification showed that concentrations of the enantiomers of amlodipine in serum from an elderly patient were higher than in serum from a young patient administered the same dose. The method was useful for determining the concentration of the enantiomers of amlodipine in hypertension patient serum and for monitoring the transition behavior of the enantiomers in humans. The method proved suitable for application to the separation of the enantiomers of amlodipine and analysis of clinical samples.     

Simultaneous Determination of Clobetasol Propionate and Calcipotriol in a Novel Fixed Dose Emulgel Formulation by LC-UV

A new, rapid, selective, cheap and simple RP-LC method has been developed and validated for the simultaneous determination of clobetasol propionate and calcipotriol mixtures in bulk drugs (raw materials) and in a novel-fixed dose emulgel formulation. Separation was carried out using a NovaPak C18 column with methanol:water (74:26 v/v) as mobile phase for isocratic elution at a flow rate of 1.0 mL min^?1. The column temperature was set at 25 °C. Calibration curves were established ranging between 0.5 and 20 μg mL^?1 and 0.5 and 10 μg mL^?1 for clobetasol propionate and calcipotriol, respectively. Limit of detection and limit of quantification values of the method was found as 0.16 and 0.48 μg mL^?1 for clobetasol propionate and 0.10 and 0.30 μg mL^?1 for calcipotriol, respectively. The method was validated in accordance with ICH guidelines and obtained results proved that the proposed method was precise, accurate, selective and sensitive for the simultaneous analysis of clobetasol propionate and calcipotriol. The proposed method can be easily applied for the simultaneous determination of clobetasol propionate and calcipotriol in prepared emulgel formulations. The obtained validation results showed that the RP-LC method is suitable for routine quantification of clobetasol propionate and calcipotriol in emulgel formulations with high precision and accuracy.     

HPLC and UPLC Methods for the Simultaneous Determination of Enalapril and Hydrochlorothiazide in Pharmaceutical Dosage Forms

High efficiency and less elution are the basic requirements of high-speed chromatographic separation. In this study, a new gradient reverse phase chromatographic methods were developed using HPLC and UPLC systems for simultaneous determination of enalapril maleate (ENL) and hydrochlorothiazide (HCZ) in pharmaceutical dosage forms. The chromatographic separations of ENL and HCZ were achieved on a Waters μ-Bondapak C 18, (300 × 3.9 mm, 10 μm) and Waters Acquity BEH C18 (100 × 2.1 mm, 1.7 μm) columns for HPLC within 5.30 min and UPLC within a short retention time of 1.95 min, respectively. A linear response was observed over the concentration range 0.270–399 μg mL^?1 of ENL, 0.260–399 μg mL^?1 of HCZ for HPLC system and 0.270–399 μg mL^?1 of ENL and 0.065–249 μg mL^?1 of HCZ for UPLC system. Also, limit of detection for ENL was 1.848 ng mL^?1 and 31.477 ng mL^?1 for HCZ, 2.804 ng mL^?1 for ENL and 2.943 ng mL^?1 for HCZ using HPLC and UPLC, respectively. The proposed methods were validated according to ICH guideline with respect to precision, accuracy, and linearity. Forced degradation studies were also performed for both compounds in bulk drug samples to demonstrate the specificity and stability indicating power of the HPLC method. Comparison of system performance with conventional HPLC was made with respect to analysis time, efficiency, and resolution.     

Analysis of Atorvastatin and Related Substances by MEKC

A new micellar electrokinetic capillary chromatographic (MEKC) method has been developed for simultaneous quantitation of atorvastatin (AT) and its related substances. The separation was carried out in an extended light path capillary at applied voltage of 30 kV using a background electrolyte consisting of 10 mM sodium tetraborate buffer pH 9.5, 50 mM sodium dodecyl sulphate and 20% (v/v) methanol. The addition of methanol to the running buffer resulted in a very effective choice to achieve resolution between the peaks of charged substances adjacent to AT as well as the peaks of neutral drug-related substances. Linear calibration curves were established over the concentration range 100–1,200 μg mL^?1 for AT and 1.0–12.5 μg mL^?1 for related substances. The proposed MEKC procedure has been validated with respect to selectivity, precision, linearity, limits of detection, and quantitation, accuracy and robustness. The method has been successfully applied to the determination of AT and purity evaluation of bulk drug and formulated products.     

Simultaneous Determination of Ibuprofen and Diphenhydramine Citrate in Tablets by Validated LC

A stability-indicating LC method was developed for the simultaneous determination of ibuprofen and diphenhydramine citrate in pharmaceutical dosage forms. The chromatographic separation was achieved on an Inertsil ODS 3V, 150 × 4.6 mm, 5 μm, column. The mobile phase contained a mixture of 50 mM potassium dihydrogen phosphate buffer:acetonitrile:triethylamine:glacial acetic acid (55:45:0.2:0.2, v/v/v/v). This method allowed the determination of 2.85–9.14 mg mL^?1 of ibuprofen and 0.54–1.73 mg mL^?1 of diphenhydramine citrate, in a diluent consisting of pH 7.2, 50 mM potassium dihydrogen phosphate buffer:acetonitrile (40:60, v/v). The flow rate was 1.2 mL min^?1 and the detection wavelength was 260 nm. The limit of detection for ibuprofen and diphenhydramine citrate was 1.72 and 0.54 μg mL^?1 and the limit of quantification was 5.73 and 1.64 μg mL^?1, respectively. This method was validated for accuracy, precision and linearity. The method was also found to be stability indicating.     

Stability-Indicating UPLC Method for the Determination of Bisoprolol Fumarate and Hydrochlorothiazide: Application to Dosage Forms and Biological Sample

A sensitive, selective and accurate ultra performance liquid chromatographic method has been developed and validated for the simultaneous determination of bisoprolol fumarate and hydrochlorothiazide in their combined dosage forms and as well as in spiked human urine samples. The separation was achieved on an Acquity UPLC BEH C18 1.7 μm (2.1 × 50 mm) column, at 40 °C with mobile phase consisting of acetonitrile:phosphate buffer (20 mM) at pH 3.0 with a gradient elution at 225 nm. Bisoprolol fumarate and hydrochlorothiazide were well separated in <1.5 min with good resolution and without any tailing and interference of excipients. The method was fully validated according to ICH guidelines in terms of accuracy, precision, linearity and specificity. A linear response was observed over the concentration range 0.5–150 μg mL^?1 for hydrochlorothiazide and 0.5–250 μg mL^?1 for bisoprolol fumarate. Limit of detection and limit of quantitation for hydrochlorothiazide were calculated as 0.01 and 0.03 μg mL^?1, respectively, and for bisoprolol fumarate were 0.07 and 0.21 μg mL^?1, respectively. Moreover, bisoprolol fumarate and hydrochlorothiazide were subjected to degradation conditions such as hydrolytic, oxidative and thermal stress conditions to evaluate the ability of the proposed method for the separation of bisoprolol fumarate and hydrochlorothiazide from their degradation compounds.     

Ion-Pair LC Method for Simultaneous Determination of Aliskiren Hemifumarate,Amlodipine Besylate and Hydrochlorothiazide in Pharmaceuticals

A rapid and precise LC method was developed for the simultaneous determination of aliskiren hemifumarate (ALS), amlodipine besylate (AML) and hydrochlorothiazide (HCZ) using acetonitrile:25 mM octane sulfonic acid sodium salt monohydrate in water (60:40 v/v) as the mobile phase. The flow rate was maintained at 1.2 mL min^?1 on a stationary phase composed of Supelco, Discovery^® HS (C18) column (25 cm × 4.6 mm, 5 μm). Isocratic elution was applied throughout the analysis. Detection was carried out at λ _max (232 nm) at ambient temperature. The method was validated according to ICH guidelines. Linearity, accuracy and precision were satisfactory over the concentration ranges of 32–320, 2–44 and 4–64 μg mL^?1 for ALS, AML and HCZ, respectively. LOD and LOQ were estimated and found to be 0.855 and 2.951 μg mL^?1, respectively, for ALS, 0.061 and 0.202 μg mL^?1, respectively, for AML as well as 0.052 and 0.174 μg mL^?1, respectively, for HCZ. The method was successfully applied for the determination of the three drugs in their co-formulated tablets. The results were compared statistically with reference methods and no significant difference was found. The developed method is specific and accurate for the quality control and routine analysis of the cited drugs in pharmaceutical preparations.     

A Rapid and Sensitive LC Method for Determination of Diastereomeric Purity of Tenofovir Alafenamide

A rapid and sensitive LC method was developed and validated for the determination of diastereomeric purity of tenofovir alafenamide (GS-7340). Baseline separation with resolution >2.8 was achieved within 17 min on a CHIRALPAK AD-3 (250 × 4.6 mm; particle size 3 μm) column using n-hexane:2-propanol (60:40 v/v) as the mobile phase at a flow rate of 1 mL min^?1. The analytes were detected by UV absorbance at 260 nm. The effects of ethanol, 2-propanol, and temperature on diastereomeric selectivity and resolution of diastereomerism were evaluated. The method was extensively validated and proved to be robust. The recoveries were between 98.17 and 102.84 % with <1.93 % relative standard deviation. The limit of detection and limit of quantitation for GS-7339 were 0.77 and 2.56 μg mL^?1 and for GS-7340 were 0.61 and 2.04 μg mL^?1, respectively. This method was extensively proved to be accurate, stable, rapid, and sensitive for the determination of diastereomeric purity of tenofovir alafenamide (GS-7340) in bulk samples.     

Quantitative Determination of Underivatized α-Tocopherol in Cow Milk, Vitamin and Multivitamin Drugs by GC-FID

A simple and rapid method for direct determination of α-tocopherol (α-T, vitamin E) in pharmaceutical preparations (vitamin and multivitamin tablets) and cow milk obtained from different villages of Erzurum in Turkey was developed and validated by GC-FID. Separation of underivatized α-T in pure substance, milk samples, vitamin and multivitamin tablets was performed in about 8.4 min, using an HP-5 capillary column. The range of quantification for the GC-FID was 1–30 μg mL^?1. Within-day and between-day precision (RSD %) were less than 8.5%, and accuracy (relative error) was less than 11.0% (n = 6). LOQ and LOD values were found to be 0.35 and 0.30 μg mL^?1, respectively. The developed method was applied directly and easily to the analysis of α-T in vitamin and multivitamin preparations and cow milk. RSD values were found to be 6.59% (Grandpherol soft gelatine capsule: 200 I.U.), 0.59% (Megadyn film tablet: 10 mg) and 1.54% (Supradyn drage: 10 I.U.). The developed method was also applied to cow milk samples and mean values of α-T content was found 2.99 μg mL^?1 in cow milk samples. This developed and validated GC–FID method, in conjunction with other methods, could be successfully applied for routine laboratory because of its simplicity, rapidity, sensitivity, precision and accuracy.     

UPLC-PDA Analysis for Simultaneous Quantification of Four Active Compounds in Crude and Processed Rhizome of Polygonum multiflorum Thunb

A novel, rapid and specific ultra performance liquid chromatography-photo diode array detection method was developed for the simultaneous determination of 2,3,5,4′-tetrahydroxystilbene-2-O-β-d-glucoside (TSG), emodin-8-O-β-d-glucoside (EMG), emodin (EM) and physcion (PS). The chromatographic separation was performed on an Acquity BEH C₁₈ column (100 × 2.1 mm i.d., 1.7 μm). The mobile phase was a mixture of 0.3% acetic acid–water and 0.3% acetic acid–acetonitrile employing gradient elution at the flow rate of 0.4 mL min^?1. The four compounds behaved linearly in the concentration range between 60.80–3040.00 μg mL^?1 (TSG), 0.50–25.00 μg mL^?1 (EMG), 2.16–108.00 μg mL^?1 (EM) and 1.56–78.00 μg mL^?1 (PS), respectively with correlation coefficients >0.999. The precision of the method were below 5% RSD. Recoveries of the four compounds ranged from 95.71 to 102.97%, with RSD values less than 2%.     

Capillary GC Analysis of Glyoxal and Methylglyoxal in the Serum and Urine of Diabetic Patients After Use of 2,3-Diamino-2,3-dimethylbutane as Derivatizing Reagent

The dicarbonyl compounds glyoxal, methylglyoxal, and dimethylglyoxal have been separated by capillary GC on a 30 m × 0.32 mm i.d. HP-5 column after precolumn derivatization with 2,3-diamino-2,3-dimethylbutane at pH 4. Chromatographic separation was complete in 6 min. Nitrogen was used as carrier gas at a flow rate of 2 mL min^?1. Split injection was performed with a split ratio of 10:1 (v/v). The derivatives were monitored by flame-ionization detection, and linear calibration plots were obtained in the ranges 0.06–0.69, 0.05–1.01, and 0.07–1.33 μg mL^?1 for glyoxal, methylglyoxal, and dimethylglyoxal, respectively; the respective detection limits were 20, 10, and 10 ng mL^?1. Glyoxal and methylglyoxal were analyzed in serum and urine from diabetics and from healthy volunteers. Amounts of glyoxal and methylglyoxal in serum from diabetic patients were 0.19–0.33 and 0.20–0.29 μg mL^?1, respectively, with respective relative standard deviations (RSD) of 0.8–1.0 and 0.8–1.1%. Amounts of glyoxal and methylglyoxal in serum from healthy volunteers were 0.05–0.08 and 0.04–0.10 μg mL^?1, respectively, with respective RSD of 0.9–1.2 and 1.0–1.2%. Levels of glyoxal and methylglyoxal in urine from diabetic patients were 0.18–0.40 and 0.25–0.36 μg mL^?1, respectively.     

Development and Validation of an Accurate LC Method for the Quantitative Determination of Voriconazole in a New Emulsion Formulation

A simple, sensitive and accurate liquid chromatographic method with UV detection was developed and validated to determine voriconazole in a new emulsion formulation. Chromatographic separation was achieved on a Diamonsil C₁₈ column (250 × 4.6 mm I.D., 5 μm) using a mobile phase consisting of acetonitrile-water-acetic acid (40:60:0.25, v/v/v) at a flow rate of 1.0 mL min^?1. The UV detection wavelength was set at 256 nm. The linear calibration curves were obtained in the concentration range of 1.00–100 μg mL^?1 with the limit of quantification of 1.00 μg mL^?1. The within- and between-run precisions in terms of percentage relative standard deviation were lower than 7.4 and 7.1%, respectively. The accuracy in terms of percentage relative error ranged from ?1.5 to 1.4%. This validated method was successfully applied to the determination of the content of voriconazole in a new emulsion formulation.     

Stereoselective Determination of Ornidazole Enantiomers in Human Plasma and Urine Samples by Chiral LC: Application to Pharmacokinetic Study

A stereoselective liquid chromatographic method to determine the enantiomers of ornidazole in human plasma and urine has been developed and validated. After addition of the internal standard (naproxen), samples were acidified and extracted with diethyl ether. The separation was performed on a Chiralcel OB-H column, using hexane-ethanol- glacial acetic acid (94:6:0.08, v/v) as the mobile phase. The method was validated for specificity, linearity, sensitivity, precision, accuracy and stability. For each enantiomer of ornidazole, linear calibration curves were obtained over the concentration range of 0.16–20 μg mL^?1 in plasma and 0.32–20 μg mL^?1 in urine. For both enantiomers of ornidazole in plasma and urine, the coefficient of variation for precision were consistently less than 12% and accuracy were within ±14% in terms of relative error. Application of the method to a preliminary pharmacokinetic study showed that this validated method was qualified for the direct determination of ornidazole enantiomers in human plasma and urine.     

Determination of Enantiomeric Purity of GSK962040 Based on Liquid Chromatography Using Chiral Stationary Phase Combined with a Pre-column Derivatization Procedure

A sensitive and accurate LC method was developed and further validated for the determination of enantiomeric purity of GSK962040. Before separation, a pre-column derivatization procedure was performed. Baseline separation with a resolution higher than 1.9 was accomplished within 15 min using a Chiralpak AD-H (250 × 4.6 mm; particle size 5 μm) column, with n-hexane: 2-propanol (85:15 v/v) as mobile phase at a flow rate of 1 mL min^?1. The eluted analytes were subsequently detected with a UV detector at 260 nm. The effects of mobile phase components and temperature on enantiomeric selectivity as well as resolution of enantiomers were thoroughly investigated. The calibration curves were plotted within the concentration range between 4 and 200 μg mL^?1 (n = 8), and recoveries between 98.15 and 101.48% were obtained, with relative standard deviation (RSD) lower than 1.42%. The LOD and LOQ for the Boc-GSK962040 were 1.23 and 4.15 μg mL^?1 and for its enantiomer were 1.38 and 4.76 μg mL^?1, respectively. The developed method was also evaluated and validated by analyzing bulk samples with different enantiomeric ratios of GSK962040. It was demonstrated that the method was accurate, robust and sensitive, and also had practical utilities for real analysis.     

A validated chiral LC method for the enantiomeric separation of AT13148 on polysaccharide-based chiral stationary phase

A sensitive and accurate LC method for the determination of AT13148 enantiomeric purity has been developed and validated. Baseline separation with a resolution higher than 1.8 was accomplished within 15 min using a Chiralpak AD-H column (250 × 4.6 mm; particle size 5 μm) and n-hexane: 2-propanol: diethylamine (85:15:0.1, v/v) as mobile phase at a flow rate of 1 mL min^?1. Eluted analytes were monitored by UV absorption at 254 nm. The effects of mobile phase components, temperature and flow rate on enantiomeric selectivity and resolution of enantiomers were investigated. Calibration curves were plotted within the concentration range between 7 and 500 μg mL^?1 (n = 11), and the recoveries between 98.24 and 100.99% were obtained, with relative standard deviation lower than 1.32%. LOD and LOQ for AT13148 were 2.46 and 7.38 μg mL^?1 and for its enantiomer were 2.54 and 7.49 μg mL^?1, respectively. It was demonstrated that the developed method was accurate, robust and sensitive for the determination of enantiomeric purity of AT13148, especially for the analysis of bulk samples.     

Development and Validation of a Stability-Indicating LC Method for Simultaneous Analysis of Aceclofenac and Paracetamol in Conventional Tablets and in Microsphere Formulations

A stability-indicating reversed-phase LC method for analysis of aceclofenac and paracetamol in tablets and in microsphere formulations has been developed and validated. The mobile phase was 80:20 (v/v) methanol–phosphate buffer (10 mM at pH 2.5 ± 0.02). UV detection was at 276 nm. The method was linear over the concentration ranges 16–24 and 80–120 μg mL^?1 for aceclofenac and paracetamol, respectively, with recovery in the range 100.9–102.22%. The limits of detection and quantitation for ACF were 0.0369 and 0.1120 μg mL^?1, respectively; those for PCM were 0.0631 and 0.1911 μg mL^?1, respectively.     

Determination of Gastrodin and Ligustrazine Hydrochloride in Plasma and Brain Dialysate by LC–Tandem MS

A gradient liquid chromatography-tandem mass spectrometry method has been developed and validated for the determination of gastrodin and ligustrazine hydrochloride in rat plasma and brain dialysates. Zolpidem was used as internal standard. For plasma samples, solid-phase extraction was used and the brain dialysates were collected from freely moving rats using brain microdialysis. Both were followed by HPLC separation and positive electrospray ionization tandem mass spectrometry detection (ESI–MS–MS). Chromatographic separation was achieved on a Symmetry RP-18 column using gradient elution with methanol and water containing 0.5% formic acid and 2 mM ammonium formate. Selected reaction monitoring (SRM) mode was used for quantitation. Good linearities were obtained in the range of 0.05–100 and 0.01–50 μg mL^?1 for gastrodin and ligustrazine hydrochloride in rat plasma, and 0.05–1,000 ng mL^?1 for both in dialysate. The lower limit of quantitation was 0.01 ng mL^?1 for gastrodin and 0.05 ng mL^?1 for ligustrazine. The method is precise and reliable and can be applied to pharmacokinetic studies.