Biological component microanalysis by laser photoacoustic imaging immunoassay

Computerized laser photoacoustic microscopy was developed and applied to the immuno-selective imaging of the microdistribution of a biological component. Human lambda-type light-chain was chosen as a model target protein and its peroxidase conjugated antibody was used for selective binding to the target protein and its staining. Using a microscopic calibration curve which was obtained from the images of homogeneously dispersed standard samples, the total quantities of randomly dispersed artificial standard samples were estimated to evaluate the reliability of this method. Finally, the method was applied to a tissue section sample, a human fetal pancreas section, to get the local and total quantitative images of the lambda-type light-chain.     

Quantitative MALDI-MS<Superscript><Emphasis Type="Italic">n</Emphasis></Superscript> analysis of cocaine in the autopsied brain of a human cocaine user employing a wide isolation window and internal standards

Detection of drugs in tissue typically requires extensive sample preparation in which the tissue is first homogenized, followed by drug extraction, before the extracts are finally analyzed by LC/MS. Directly analyzing drugs in intact tissue would eliminate any complications introduced by sample pretreatment. A matrix-assisted laser desorption/ionization tandem mass spectrometry (MALDI-MS ⁿ ) method as been developed for the quantification of cocaine present in postmortem brain tissue of a chronic human cocaine user. It is shown that tandem mass spectrometry (MS² and MS³) increase selectivity, which is critical for differentiating analyte ions from background ions such as matrix clusters and endogenous compounds found in brain tissue. It is also shown that the use of internal standards corrects for signal variability during quantitative MALDI, which can be caused by inhomogeneous crystal formation, inconsistent sample preparation, and laser shot-to-shot variability. The MALDI-MS ⁿ method developed allows for a single MS³ experiment that uses a wide isolation window to isolate both analyte and internal standard target ions. This method is shown to provide improved precision [∼10–20 times reduction in percent relative standard deviation (%RSD)] for quantitative analysis compared to using two alternating MS³ experiments that separately isolate the target analyte and internal standard ions.     

Silver‐109‐based laser desorption/ionization mass spectrometry method for detection and quantification of amino acids

A new methodology applicable for both high‐resolution laser desorption/ionization mass spectrometry and mass spectrometry imaging of amino acids is presented. The matrix‐assisted laser desorption ionization‐type target containing monoisotopic cationic ¹⁰⁹Ag nanoparticles (¹⁰⁹AgNPs) was used for rapid mass spectrometry measurements of 11 amino acids of different chemical properties. Amino acids were directly tested in 100,000‐fold concentration change conditions ranging from 100 μg/mL to 1 ng/mL which equates to 50 ng to 500 fg of amino acid per measurement spot. Limit of detection values obtained suggest that presented method/target system is among the fastest and most sensitive ones in laser mass spectrometry. Mass spectrometry imaging of spots of human blood plasma spiked with amino acids showed their surface distribution allowing optimization of quantitative measurements.     

Quantitative aspects in electrospray ionization ion trap and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of malto-oligosaccharides

Mass spectrometry is widely applied in carbohydrate analysis, but still quantitative evaluation of data is critical due to different ionization efficiencies of the constituents in a mixture. Different size and chemical structure of the analytes cause their uneven distribution in droplets (electrospray ionization, ESI) or matrix spots (matrix-assisted laser desorption/ionization, MALDI). In addition, instrumental parameters affect final ion yields. In order to study and optimize the latter, an equimolar mixture of malto-oligosaccharides (DP1-6) was analyzed using varying target masses for ESI as well as different matrices and laser power for MALDI. The sodium adducts and derivatives for positive ion mode (hydrazones with Girard's T Reagent, GT) and negative ion mode (reductively aminated with o-aminobenzoic acid, oABA) were studied. Negatively charged oABA-labeled malto-oligosaccharides turned out to be unsuitable for quantification of the malto-oligomeric composition. Best agreement was achieved when applying target masses in the range of the highest homolog in the mixture in electrospray ionization ion trap (ESI-IT) (1-2% deviation with GT label or as Na(+) adducts). Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) gave best results when the laser power was adjusted significantly over the desorption/ionization threshold (1% deviation with GT label). Both parameters show significant influence on the determined oligomeric composition. Consequently, estimation and even quantitative determination of amounts of oligosaccharides in a mixture can be achieved when the analytes are labeled and the proper instrumental parameters are used.     

Effect of laser parameters on laser ablation and laser-induced plasma formation: A numerical modeling investigation

A comprehensive numerical model has recently been developed for nanosecond (ns) laser ablation of metallic targets, describing the processes of target heating, melting and vaporization, the resulting plume expansion in 1 atm helium gas, as well as plasma formation in the plume. In the present paper, we investigate the influence of laser parameters, i.e., laser irradiance, pulse duration and wavelength, on typical calculation results, such as the target temperature, melt and evaporation characteristics, the plume expansion velocity, plume (plasma) temperature and ionization degree, densities of neutrals, ions and electrons in the plume, as well as the laser absorption characteristics in the plume (plasma shielding). Comparison is made with experimental data from literature, whenever available, and in general, good agreement is reached between our model predictions and experimental results. Therefore, the model can be useful to predict trends in target and plume (plasma) characteristics, which are difficult to obtain experimentally.     

Optical emission spectroscopy and modeling of plasma produced by laser ablation of titanium oxides

In the present study, the time evolution of electron number density, of electron, atom and ion temperatures, of plasma produced by KrF excimer laser ablation of titanium dioxide and monoxide targets, are investigated by temporally and spatially resolved optical emission spectroscopy over a wide range of laser fluence from 1.7 to 6 J cm⁻², oxygen pressures of 10⁻²–10⁻¹ torr and in a vacuum. A state-to-state collisional radiative model is proposed for the first time to interpret the experimental results at a distance of 0.6 mm from the target surface, in vacuum and for a time delay from 100 to 300 ns from the beginning of the laser pulse. In particular, we concentrate our attention on problems concerning the existence of the local thermodynamic conditions in the laser-induced plasma and deviation from them, as observed in our experiment. The numerical model proposed for calculating the electron number density and the population densities of atoms and ions in excited states give good quantitative agreement with the experimental results of the optical emission spectroscopy measurements.     

Analytical Analysis of Different Karats of Gold Using Laser Induced Breakdown Spectroscopy (LIBS) and Laser Ablation Time of Flight Mass Spectrometer (LA-TOF-MS)

Laser induced breakdown spectroscopy (LIBS) coupled with a laser ablation time of flight mass spectrometer (LA-TOF-MS) has been developed for discrimination/analysis of the precious gold alloys cartage. Five gold alloys of Karats 18K, 19K, 20K, 22K and 24K having certified composition of gold as 75, 79, 85, 93 and 99.99% were tested and their precise elemental compositions were determined using the laser produced plasma technique. The plasma was generated by focusing beam of a Nd:YAG laser on the target in air and its time integrated emission spectra were registered in the range 250–870 nm. The calibration free LIBS technique (CF-LIBS) was used for the quantitative determination of the constituent elements present in different Karats of gold. Elemental compositions of these gold alloys were also determined using a Laser Ablation time of flight mass spectrometer (LA-TOF-MS). The LIBS limit of detection was calculated from the calibration curves for copper, silver and gold. Results of CF-LIBS and LA-TOF-MS are in excellent agreement with the certified values. It is demonstrated that LIBS coupled with LA-TOF-MS is an efficient technique that can be used to analyze any precious alloys in a fraction of a second.     

Laser Based Optical Emission Studies of Zinc Oxide (ZnO) Plasma

We present the optical emission characteristics of the zinc oxide (ZnO) plasma produced by the first (1,064 nm) and second (532 nm) harmonics of a Q switched Nd: YAG laser. The target material was placed in front of laser beam in air (at atmospheric pressure).The experimentally observed line profiles of neutral zinc (Zn I) have been used to extract the electron temperature using the Boltzmann plot method, whereas, the electron number density has been determined from the Stark broadening. The electron temperature is calculated by varying distance from the target surface along the line of propagation of plasma plume and also by varying the laser irradiance. Beside we have studied the variation of number density as a function of laser irradiance as well as its variation with distance from the target surface. It is observed that electron temperature and electron number density increases as laser energy is increased.     

Micro- and nanosecond laser TiN coating/steel modification: Morphology studies

Morphology effects induced during interaction of μs- (Transversely Excited Atmospheric (TEA) CO₂ laser) or ns- (HF laser) pulses with titanium nitride (TiN) coating, deposited on austenitic stainless steel AISI 316, were studied. Experiments were carried out in regime of focused laser beam in air at atmospheric pressure. The used laser fluences were found to be sufficient for inducing intensive surface modifications of the target. The energy absorbed from the CO₂ as well as HF laser beam is mainly converted into thermal energy, causing different effects like ablation, appearance of hydrodynamic features, etc. Morphology characteristics obtained during ns-pulses irradiation (HF laser) were different to those initiated by μs-pulses (TEA CO₂ laser). The changes on the target surface in form of massive resolidifed droplets and crown-like structures were observed only for ns- (HF laser) pulses. It was found that these effects are a consequence of higher temperature and better coupling of the HF laser radiation with the target. Recent investigations of ps-Nd:YAG laser interaction with the same TiN coating showed that morphology picture is quite different including the reduction of thermal effect. The article is published in the original.     

High-speed separation system of randomly suspended single living cells by laser trap and dielectrophoresis

We developed a new system for random separation of a single microorganism, such as a living cell and a microbe, in the microfluidic device under the microscope by integrating the laser-trapping force and dielectrophoretic (DEP) force. An arbitrarily selected single microbe could be isolated in a microchannel, despite the presence of a large number of microbes in solution. Once the target microbe is trapped at the focal point of the laser, we can easily realize exclusion of excess microbes around the target by controlling the electric field, while keeping the target trapped by the laser at the focal point. To realize an efficient separation system, we proposed a new separation cell and produced it by microfabrication. Flow speed in the microchannel is adjusted and balanced to realize high-speed and high-purity extraction of the target. Some preliminary experiments are conducted to show the effectiveness. The target is trapped by the laser, transported, and is taken out from the extraction port. Total separation time is less than 20 s. Our method is extremely useful in the pure cultivation of the cell and will be a promising method for biologists in screening useful microbes.     

Double pulse laser ablation and laser induced breakdown spectroscopy: A modeling investigation

A numerical model, describing laser–solid interaction (i.e., metal target heating, melting and vaporization), vapor plume expansion, plasma formation and laser–plasma interaction, is applied to describe the effects of double pulse (DP) laser ablation and laser induced breakdown spectroscopy (LIBS). Because the model is limited to plume expansion times in the order of (a few) 100 ns in order to produce realistic results, the interpulse delay times are varied between 10 and 100 ns, and the results are compared to the behavior of a single pulse (SP) with the same total energy. It is found that the surface temperature at the maximum is a bit lower in the DP configuration, because of the lower irradiance of one laser pulse, but it remains high during a longer time, because it rises again upon the second laser pulse. Consequently, the target remains for a longer time in the molten state, which suggests that laser ablation in the DP configuration might be more efficient, through the mechanism of splashing of the molten target. The total laser absorption in the plasma is also calculated to be clearly lower in the DP configuration, so that more laser energy can reach the target and give rise to laser ablation. Finally, it is observed that the plume expansion dynamics is characterized by two separate waves, the first one originating from the first laser pulse, and the second (higher) one as a result of the second laser pulse. Initially, the plasma temperature and electron density are somewhat lower than in the SP case, due to the lower energy of one laser pulse. However, they rise again upon the second laser pulse, and after 200 ns, they are therefore somewhat higher than in the SP case. This is especially true for the longer interpulse delay times, and it is expected that these trends will be continued for longer delay times in the μs-range, which are most typically used in DP LIBS, resulting in more intense emission intensities.     

High spatial resolution in laser-induced breakdown spectroscopy of expanding plasmas

We report a technique that is able to achieve high spatial resolution in the measurement of the temporal and spectral emission characteristics of laser-induced expanding plasmas. The plasma is imaged directly onto the slit of an imaging spectrograph coupled to a time-gated intensified camera, with the plasma expansion direction being parallel to the slit extension. In this way, a single hybrid detection system is used to acquire the spatial, spectral and temporal characteristics of the laser induced plasma. The parallel acquisition approach of this technique ensures a much better spatial resolution in the expansion direction, reproducibility and data acquisition speed than commonly obtained by sequential measurements at different distances from the target. We have applied this technique to study the laser-induced plasma in LiNbO₃ and Bi₁₂Ge₁O₂₀, revealing phenomena not seen in such detail with standard instruments. These include extreme line broadening up to a few nanometers accompanied by self-absorption near the target surface, as well as different ablation and expansion dynamics for the different species ejected. Overall, the high precision and wealth of quantitative information accessible with this technique open up new possibilities for the study of fundamental plasma expansion processes during pulsed laser ablation.     

基于MnO2/石墨烯纳米材料的表面辅助激光解吸电离质谱在内毒素快速鉴定中的应用

利用大肠埃希菌（E.coli O111：B4）中提取精制的内毒素（Control standard endotoxin,CSE）为研究对象,以MnO₂/石墨烯（MnO₂/G）纳米复合材料为基质,建立了一种基于MnO₂/G纳米材料的表面辅助激光解吸电离质谱（Surface-assisted laser desorption ionization mass spectrometry,SALDI-MS）的内毒素检测新方法.利用SALDI-MS方法可实现对不同注射液和饮用水中内毒素的快速鉴定与定量分析.与传统的鲎试剂检测方法相比,基于MnO₂/G纳米复合材料的SALDI-MS方法具有操作简便、灵敏度高、分辨率高、检测速度快、高通量和耐盐性好等优点,有望应用于更多食品和药品中细菌内毒素的高通量快速筛查.     

Matrix-assisted laser desorption/ionization fourier transform ion cyclotron resonance mass spectrometry with pulsed in-source collision gas and in-source ion accumulation

A new matrix-assisted laser desorption/ionization (MALDI) source for Fourier transform ion cyclotron resonance mass spectrometry (FTMS) has been developed. The new source is equipped with a hexapole ion guide. The sample on the laser target is one millimeter from the hexapole ion guide, so that ions are desorbed directly into the guide. A device for pulsing collision gas in direct proximity to the laser target makes it possible to cool the ions, which have a kinetic energy spread of several electron volts when produced by the MALDI process. These ions are trapped in the hexapole where positive potentials at the laser target and at an extraction plate help trap ions along the longitudinal axis. After a pre-defined trapping time the voltage of the extraction plate is reversed and the trapped ions are extracted for transmission to the ion cyclotron resonance cell. Accumulation of ions from multiple laser shots in the hexapole before mass spectrometric analysis increases sensitivity. Preliminary sensitivity studies with substance P show that 10 attomoles of analyte applied on the target can be detected with a signal-to-noise (S/N) ratio >15.     

脉冲激光轰击固体靶制备纳米材料

综述了近年来脉冲激光轰击固体靶制备纳米材料。按介质种类和性质,脉冲激光轰击固体靶制备纳米材料的方法可分为六种:在气相、静态液相、动态液相三种惰性状态及其反应性状态下的反应。本文对以上六种制备方法及其优缺点作了较详细的阐述。其中最近发展起来的脉冲激光轰击处于流动液相中固体靶技术具有明显的优势,所制得的纳米产物分布均匀,重现性高,适用范围广泛。通过改变靶材和流动相的组分可制备各种各样具有新奇光、电、磁特性的纳米材料或纳米杂化材料,因而该技术有望成为脉冲激光轰击固体靶技术的一个重要的发展方向。     

Application of primary plasma standardization to Nd-YAG laser-induced shock wave plasma spectrometry for quantitative analysis of high concentration Au–Ag–Cu alloy

A study was performed on a laser-induced shock wave plasma generated on high concentration Au–Ag–Cu alloys by a Q-switched Nd-YAG laser of 4.8 mJ under reduced air pressure of 2 torr. It was found that the total emission intensity of the secondary plasma is proportional to the intensity of the primary plasma. Assuming linear proportionality between the intensity of the primary plasma and the number of atoms vaporized from the target, it is proposed that quantitative analysis can be applied to the intensities of the analytical emission lines normalized by the total intensity of the primary plasma. This experimental result demonstrated for each metal element shows an excellent linear relationship between the normalized emission line intensity and the content of the corresponding element.     

A general purpose XUV laser spectrometer: some applications to N2, O2 and CO2

Coherent radiation is generated from 90 to 105 nm by frequency tripling the frequency-doubled output of a pulsed Nd: YG-pumped dye laser using a synchronized pulsed jet of various gases as the nonlinear medium. The XUV radiation is isolated by a pair of dichroic mirrors before interacting with a supersonically cooled gas target. Provisions have been made to measure the photoion yield as a function of wavelength using a time-of-flight mass spectrometer. In addition absorption by the target gas or fluorescence from the excited target and/or its fragments can be detected. Some applications are presented which illustrate the versatility of this XUV laser spectrometer involving 1+1 resonance-enhanced multiphoton ionization of N₂ and excitation of Rydberg states of O₂ and CO₂.     

Multi-photon ionization in the mass spectrometry of polyatomic molecules: Cross sections

Multi-photon ionization (MPI) with tunable visible/UV laser light is shown to be a sensitive tool for analysis of traces in gas mixtures when combined with a mass spectrometer. Mass spectra of six different organic molecules, obtained with low intensity laser light, are presented and demonstrate the facility of ionization without fragmentation (soft ionization) under proper experimental conditions. Quantitative values for the cross sections for both two photon steps are obtained from the measured intensity dependence and the absolute ion numbers. Such quantitative data help in the evaluation and definition of this new ionization technique in mass spectrometry. Efficiencies of ionization for some molecules are as high as 25% leading to 10⁶ ions in a single pulse from the dye laser (1 kW). Detectability as low as 2 parts in 10⁹ is thus predicted.     

In situ investigation of laser ablation

The complex system of in situ diagnostic methods such as SEM, ballistic microbalance, electric probe and high speed photography is necessary for measurement of basic parameters of laser target interaction. Only the knowledge of these basic parameters allows the discussion of microscopical processes on the target surface by laser irradiation. The results are discussed for our synchronised double laser system and for aluminium target. The mass relation of atoms, ions and droplets emitted by the target was determined. This relation is the base of a complete energy balance of laser target interaction.