The determination of mercury in soils and related materials by colc-vapour atomic absorption spectrometry

A method for the determination of mercury in soils and related materials, by the cold-vapour, reduction-aeration absorption technique, is described. The mercury in the reduced sample solution is partitioned, by agitation, between the liquid phase and a fixed volume of air which is then blown through an absorption cell for measurement. Three preparative methods were developed, two of which use acid digestion and wet oxidation and the other direct oxidation in an oxygenflask combustion technique. Comparative analysis of natural samples by the three methods was used to validate the techniques developed, since no authenticated reference samples were available. For 1-g samples, the analytical range was 0.01–0.5 p.p.m.     

Double pulse laser induced breakdown spectroscopy applied to natural and artificial materials from cultural heritages: A comparison with micro-X-ray fluorescence analysis

The laser-induced breakdown spectroscopy (LIBS) is an applied physical technique that has shown in recent years its great potential for rapid qualitative analysis of materials. Thanks to the possibility to implement a portable instrument that perform LIBS analysis, this technique is revealed to be particularly useful for in situ analysis in the field of cultural heritages. The purpose of this work is to evaluate the potentiality of LIBS technique in the field of cultural heritages, with respect to the chemical characterization of complex matrix as calcareous and refractory materials for further quantitative analyses on cultural heritages. X-Ray Fluorescence (XRF) analyses were used as reference. Calibration curves of certified materials used as standards were obtained by XRF analyses. The LIBS measurements were performed with a new mobile instrument called Modì (Mobile Double pulse Instrument for LIBS Analysis). The XRF analyses were performed with a portable instrument ArtTAX. LIBS and XRF measurement were performed on both reference materials and samples (bricks and mortars) sampled in the ancient Greek–Roman Theatre of Taormina. Although LIBS measurements performed on reference materials have shown non linear response to concentrations, and so we were not able to obtain quantitative results, an integrated study of XRF and LIBS signals permitted us to distinguish among chemical features and degradation state of measured building materials.     

Dynamic ultrasound-assisted extraction of cadmium and lead from plants prior to electrothermal atomic absorption spectrometry

A dynamic ultrasound-assisted extraction step is proposed for the quantitative extraction of Cd and Pb from plant leaves prior to determination by electrothermal atomic absorption spectrometry (ETAAS). Beech leaves (a certified reference material—CRM 100—where the target analytes were not certified) were used for optimizing the extraction step by a multivariate approach. The samples (0.25 g) were subjected to dynamic ultrasound-assisted extraction with dilute nitric acid as extractant. The method was validated with a certified reference material BCR-062 (olive leaves) where both Cd and Pb are certified. The good agreement between the certified values and those found using the proposed method demonstrates its usefulness. The repeatability was 2.0 and 0.9% and the within-laboratory reproducibility was 7.1 and 2.8% for Cd and Pb, respectively. The precision of the method, together with its efficiency, rapidity, low cost and environmental acceptability makes it a good alternative for the determination of trace metals from plant material.     

From brain to food: analysis of phosphatidylcholins, lyso-phosphatidylcholins and phosphatidylcholin-plasmalogens derivates in Alzheimer's disease human post mortem brains and mice model via mass spectrometry

Alzheimer's disease (AD) is a devastating neurodegenerative disorder characterized by extracellular senile plaques mainly consisting of Aβ, a 40-42 amino acid long peptide, and intracellular neurofibrillary tangles, accompanied by an excessive loss of synapses. Recently evidence accumulated that nutrition, especially polyunsaturated fatty acids, influences AD pathogenesis. Especially mid-life food habits with the consumption of specific fatty acids (FA) appear to influence the disease risk. The timely separation between food intake and disease makes a direct correlation with detailed analysis of eating habits combined with accurate food analysis nearly unattainable. A possible solution to circumvent these difficulties is to investigate the FA composition in human post mortem brain. In this study we focused on the main phospholipids phosphatidylcholin (PC), phosphatidylcholin-plasmalogen (PC-PL) and lyso-phosphatidylcholin (lyso-PC) in AD brains compared to control brains. Frontal cortices, temporal cortices and cerebellum of 30 AD (mean 78 years) and 14 control aged matched brains (mean 77.4 years) as well as APP transgenic mice compared to control mice were analyzed using an AB Sciex 4000 Qtrap mass spectrometer utilizing a FIA MS/MS method. PC, PC-PL and lyso-PC metabolites were analyzed in respect to saturation level and FA composition. As expected, the majority of the lipid species showed no significant differences, but interestingly a few species revealed a highly significant reduction in AD brains. These FAs are potential candidates for further food analysis in respect to AD pathology. Additionally, we show that the method applied with multiple reaction monitoring (MRM) used for this study is suitable for semi quantitative analysis of small amounts (10 μl) of brain tissue.     

Dielectrophoresis: Developments and applications from 2010 to 2020

The 20th century has seen tremendous innovation of dielectrophoresis (DEP) technologies, with applications being developed in areas ranging from industrial processing to micro- and nanoscale biotechnology. From 2010 to present day, there have been 981 publications about DEP. Of over 2600 DEP patents held by the United States Patent and Trademark Office, 106 were filed in 2019 alone. This review focuses on DEP-based technologies and application developments between 2010 and 2020, with an aim to highlight the progress and to identify potential areas for future research. A major trend over the last 10 years has been the use of DEP techniques for biological and clinical applications. It has been used in various forms on a diverse array of biologically derived molecules and particles to manipulate and study them including proteins, exosomes, bacteria, yeast, stem cells, cancer cells, and blood cells. DEP has also been used to manipulate nano- and micron-sized particles in order to fabricate different structures. The next 10 years are likely to see the increase in DEP-related patent applications begin to result in a greater level of technology commercialization. Also during this time, innovations in DEP technology will likely be leveraged to continue the existing trend to further biological and medical-focused applications as well as applications in microfabrication. As a tool leveraged by engineering and imaginative scientific design, DEP offers unique capabilities to manipulate small particles in precise ways that can help solve problems and enable scientific inquiry that cannot be addressed using conventional methods.     

Double pulse laser induced breakdown spectroscopy applied to natural and artificial materials from cultural heritages : A comparison with micro-X-ray fluorescence analysis

The laser-induced breakdown spectroscopy (LIBS) is an applied physical technique that has shown in recent years its great potential for rapid qualitative analysis of materials. Thanks to the possibility to implement a portable instrument that perform LIBS analysis, this technique is revealed to be particularly useful for in situ analysis in the field of cultural heritages. The purpose of this work is to evaluate the potentiality of LIBS technique in the field of cultural heritages, with respect to the chemical characterization of complex matrix as calcareous and refractory materials for further quantitative analyses on cultural heritages. X-Ray Fluorescence (XRF) analyses were used as reference. Calibration curves of certified materials used as standards were obtained by XRF analyses. The LIBS measurements were performed with a new mobile instrument called Modì (Mobile Double pulse Instrument for LIBS Analysis). The XRF analyses were performed with a portable instrument ArtTAX. LIBS and XRF measurement were performed on both reference materials and samples (bricks and mortars) sampled in the ancient Greek–Roman Theatre of Taormina. Although LIBS measurements performed on reference materials have shown non linear response to concentrations, and so we were not able to obtain quantitative results, an integrated study of XRF and LIBS signals permitted us to distinguish among chemical features and degradation state of measured building materials.     

Analytical methods to derive the elastic modulus of soft and adhesive materials from atomic force microcopy force measurements

We present new DMT‐based and JKR‐based methods to derive the elastic modulus of sample surfaces from an atomic force microscope force‐distance curve (DMT: Derjaguin‐Muller‐Toporov, JKR: Johnson–Kendall–Roberts). Application of the methods to the Maugis–Dugdale curves revealed that the JKR‐based method determines very accurate moduli for Maugis' transitional parameter λ > 0.3; however, the DMT‐based method generally estimates much less accurate moduli. The new JKR‐based method has advantages over the two‐point method, which has been often used for the JKR analysis, in capabilities to select the fitting range and to involve more than two points in curve fitting. Utilizing the advantages, for example, one can limit the fitting range to the attractive force zone to reduce the contact area of soft and adhesive materials. The method consists of algebraical calculation and optionally linear fitting; hence, the computational cost is low enough to be applicable to a real‐time JKR analysis method of fast force mapping. The detailed procedure of the method is explained using a force‐distance curve on a poly(dimethylsiloxane) surface. The advantages of the method are demonstrated using a force mapping data on a vulcanized rubber blend. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1279–1286     

A simple, rapid and sensitive method for simultaneous determination of rivastigmine and its major metabolite NAP 226-90 in rat brain and plasma by reversed-phase liquid chromatography coupled to electrospray ionization mass spectrometry

A simple and sensitive reversed-phase liquid chromatography coupled with electrospray-mass spectrometry was developed and validated for the simultaneous determination of rivastigmine, a cholinesterase inhibitor, and its major metabolite NAP 226-90 in rat plasma and brain homogenates. Rivastigmine and NAP 226-90 were extracted from plasma and brain by ethyl acetate and, after drying under nitrogen, re-dissolved in acetonitrile and separated isocratic by HPLC on a C(18) column and quantified by single ion monitoring mass spectrometer. The mean (+/-SD) extraction efficiency for rivastigmine in plasma and brain was 93 +/- 2 and 95 +/- 2% (n = 5) of NAP 226-90 in a drug range of 10-100 pmol/mL or pmol/g. The method proved to be linear within the tested range (regression coefficient, r = 0.9999, n = 5). Intra- and inter-day precision coefficients of variation and accuracy bias were acceptable (within 15%, n = 5) over the entire range for both compounds using plasma or brain samples. The limits of quantification were 0.5 pmol/mL plasma and 2.5 pmol/g brain for rivastigmine and 1 pmol/mL plasma and 5 pmol/g brain for NAP 226-90, respectively. The analytical technique was used to determine the concentrations of rivastigmine and its metabolite NAP 226-90 in rat plasma and brain after oral drug administration. The concentrations of the parent drug and its major metabolite were compared to a pharmacodynamic parameter, the ex vivo inhibition of acetylcholinesterase.     

Dynamic ultrasound-assisted leaching of essential macro and micronutrient metal elements from animal feeds prior to flame atomic absorption spectrometry

A method for routine analysis of essential metal elements in animal feeds using a dynamic and automated ultrasound-assisted extractor is proposed here. Owing to the different concentration of the essential metal elements in the samples, two macronutrients—namely, Ca and Mg—and three micronutrients or trace elements—namely, Fe, Cu and Zn—were selected as models for the optimisation and characterisation of the proposed method by using experimental design methodology. Moreover, the extraction kinetics and influence of the particle size on the extraction efficiency were studied. The detection and quantification limits ranged between 2.9 and 40 g kg^–1 and between 7.9 and 95.5 g kg^–1, respectively. The precision, expressed as repeatability relative standard deviation (RSD) and as within-laboratory RSD, ranged between 1.86 and 5.66% and between 5.06 and 6.15%, respectively. The proposed approach allows the extraction of these metal elements from animal feeds with extraction efficiencies similar to those provided by the AOAC Official Method 968.08, but with a drastic reduction in both the extraction time (18 min versus 4.5 h) and sample handling, and using smaller volumes of extractant (an acid aqueous solution).     

From molecules to visuals: Empowering drug discovery and development with mass spectrometry imaging

Over the past three decades, mass spectrometry imaging (MSI) has emerged as a valuable tool for the spatial localization of drugs and metabolites directly from tissue surfaces without the need for labels. MSI offers molecular specificity, making it increasingly popular in the pharmaceutical industry compared to conventional imaging techniques like quantitative whole-body autoradiography (QWBA) and immunohistochemistry, which are unable to distinguish parent drugs from metabolites. Across the industry, there has been a consistent uptake in the utilization of MSI to investigate drug and metabolite distribution patterns, and the integration of MSI with omics technologies in preclinical investigations. To continue the further adoption of MSI in drug discovery and development, we believe there are two key areas that need to be addressed. First, there is a need for accurate quantification of analytes from MSI distribution studies. Second, there is a need for increased interactions with regulatory agencies for guidance on the utility and incorporation of MSI techniques in regulatory filings. Ongoing efforts are being made to address these areas, and it is hoped that MSI will gain broader utilization within the industry, thereby becoming a critical ingredient in driving drug discovery and development.     

Novel amides and Schiff's bases derived from 1,3,4-oxadiazole derivatives: synthesis and mesomorphic behaviour

The synthesis and liquid crystalline properties of novel achiral amides (Ia–g, IIa–g and IVa,b), achiral Schiff's bases (IIIa–g and Va–g), chiral amides (VI, VII) and chiral Schiff's bases (VIII–XI) incorporating a 1,3,4-oxadiazole ring are reported. All amides of the series I and II display an enantiotropic smectic A phase. The amide IVa,b did not show mesomorphic properties. Amides of the series Ia–g and IIa–g contain a flexible n-tetradecylthio chain, the other terminal substituent is an n-alkoxy chain and n-alkyl chain, respectively (n?=?4–10) and the 1,3,4-oxadiazole is in the terminal rigid core. Amides Ia–g have broader mesomorphic range and higher thermal stability than the corresponding amides IIa–g. Amides IVa,d contain the 1,3,4-oxadiazole ring in the centre of the rigid core and two flexible alkoxy chains as flexible terminal substituents. Thus, the mesomorphic properties are favoured if 1,3,4-oxadiazole is shifted to a terminal position of the rigid core. Schiff's bases IIIa–g display an enantiotropic dimorphism smectic C–smectic A. Schiff's bases IIIa–g have a broader mesomorphic range than the analogous amides Ia–g. Schiff's bases Va–g exhibit a dimorphism smectic A–nematic, and in contrast to this the analogous amide IVa,b did not show mesomorphism. The chiral amides VI and VII and chiral Schiff's bases X and XI did not show mesomorphic properties and only the chiral Schiff's bases VIII and IX display a chiral smectic C phase in a short mesomorphic range. A density functional theory theoretical study at the B3LYP/6–311++G(d,p) level was performed in order to analyse the structural features that must be related with the mesomorphic behaviour of the reported compounds.     

Green's function calculation of through‐bond electronic coupling in donor–bridge–acceptor model systems II: Importance factors applied to atomic sites

Importance factors, associated with the Green's function formalism, are introduced. They are applied for the determination of the relative atomic site contribution to the electronic interaction propagation in a molecular system. The calculation is performed at the Hartree–Fock (self‐consistent) level, using ab initio STO‐3G, 4‐31G, and D95 basis sets. The results are compared with those obtained from the charge densities of the appropriate molecular orbitals at the ab initio STO‐3G level. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Persistent Room Temperature Phosphorescence from Triarylboranes: A Combined Experimental and Theoretical Study

Achieving highly efficient phosphorescence in purely organic luminophors at room temperature remains a major challenge due to slow intersystem crossing (ISC) rates in combination with effective non‐radiative processes in those systems. Most room temperature phosphorescent (RTP) organic materials have O‐ or N‐lone pairs leading to low lying (n, π*) and (π, π*) excited states which accelerate k_isc through El‐Sayed's rule. Herein, we report the first persistent RTP with lifetimes up to 0.5 s from simple triarylboranes which have no lone pairs. RTP is only observed in the crystalline state and in highly doped PMMA films which are indicative of aggregation induced emission (AIE). Detailed crystal structure analysis suggested that intermolecular interactions are important for efficient RTP. Furthermore, photophysical studies of the isolated molecules in a frozen glass, in combination with DFT/MRCI calculations, show that (σ, B p)→(π, B p) transitions accelerate the ISC process. This work provides a new approach for the design of RTP materials without (n, π*) transitions.     

Non-Boltzmann sampling and Bennett's acceptance ratio method: how to profit from bending the rules

The exact computation of free energy differences requires adequate sampling of all relevant low energy conformations. Especially in systems with rugged energy surfaces, adequate sampling can only be achieved by biasing the exploration process, thus yielding non-Boltzmann probability distributions. To obtain correct free energy differences from such simulations, it is necessary to account for the effects of the bias in the postproduction analysis. We demonstrate that this can be accomplished quite simply with a slight modification of Bennett's Acceptance Ratio method, referring to this technique as Non-Boltzmann Bennett. We illustrate the method by several examples and show how a creative choice of the biased state(s) used during sampling can also improve the efficiency of free energy simulations.     

Simultaneous quantitation of polygalaxanthone III and four ginsenosides by ultra‐fast liquid chromatography with tandem mass spectrometry in rat and beagle dog plasma after oral administration of Kai‐Xin‐San: Application to a comparative pharmacokinetic study

A fast, selective, and quantitative ultra‐fast liquid chromatography with tandem mass spectrometry method has been developed and validated for the simultaneous quantitation of polygalaxanthone III, ginsenoside Rb1, ginsenoside Rd, ginsenoside Re, and ginsenoside Rg1 in the plasma of rat and beagle dog after oral administration of Kai‐Xin‐San. After addition of the internal standard, salidroside, the plasma samples were extracted by liquid–liquid extraction and separated on a Venusil MP C₁₈ column with methanol/0.01% acetic acid water as mobile phase. The tandem mass spectrometric detection was performed in the multiple reaction monitoring with turbo ion spray source in a switching ionization mode. The method was examined, and found to be precise and accurate with the linearity range of the compounds. The intra‐ and interday precision and accuracy of the analytes were well within acceptance criteria (±15%). The mean extraction recoveries of analytes and internal standard were all >75.0%. The validated method has been successfully applied to comparing pharmacokinetic profiles of analytes in rat and beagle dog plasma. The results indicated that no significant differences were observed in pharmacokinetic parameters of ginsenoside Rg1, while the others had significant differences, which may due to the different mechanisms of absorption and metabolism.