Assessment of trace metals contamination in estuarine sediments using a sequential extraction technique and principal component analysis

Fractionation of the metals Cd, Cr, Cu, Ni, Pb and Zn in sediments was performed for samples collected from eight locations in the Poxim river estuary of Sergipe State, northeast Brazil, using the 3-stage sequential extraction procedure proposed by the European Community Bureau of Reference (BCR). The extraction method was found to be satisfactory for analysis of certified reference material BCR-701, with recovery values ranging from 85% (Cu) to 117% (Cr). The detection limits obtained were 0.001 to 0.305 µg g^− 1. Zn exhibited greatest mobility and bioavailability, indicative of anthropogenic sources, while Cr was mainly found in the residual fraction and could be used as an indicator for the contribution from natural sources. Cd, Cu, Ni and Pb were associated with the oxidizable fraction, and Pb, Cr and Ni with the reducible fraction. Principal component analysis (PCA) clearly separated the metals into three groups: I (Zn); II (Pb); III (Cd, Cu, Cr and Ni). These groupings were mainly due to different distributions of the metals in the various fractions, in sediments from the different locations. Risk assessment code (RAC) analysis indicated that although the metals presented a moderate overall risk to the aquatic environment, nickel showed a low risk (RAC < 10%) at three sites, while zinc presented a high risk (RAC > 30%) at four other sites.     

Trace metal accumulation in tissues of sole (Solea senegalensis) and the relationships with the abiotic environment

The distribution patterns and the organ-specific accumulation trends of 10 trace metals (iron, manganese, zinc, copper, chromium, nickel, cobalt, lead, cadmium and silver) and 4 major elements (sodium, potassium, calcium and magnesium) in 10 different tissues (heart, muscle, kidney, stomach, intestine, liver, gill, gonads, white skin and dark skin) of a benthic fish species (Solea senegalensis) from a densely populated coastal area affected by anthropogenic activities, the Bay of Cadiz (SW Spain), have been investigated. High variability of metal concentrations among tissues were found for Ca, Fe, Zn, Cu, Pb and Ag. Factor analysis was applied to study this variability. Five principal components were found explaining the 92.95% of the total variance and similarities in behavioural patterns of bioaccumulation were described. They associated Mg, Cr, Ni and Mn to intestine and stomach tissues (PC1), Ag, Cu and Cd to liver (PC2), Zn, K and Co to gonads (PC3), Na, Fe and Pb to gill, heart and kidney tissues (PC4) and Ca, Pb and Mn to gill and dark skin (PC5). The metallic concentration in the sediment and water was also studied. The pollution in this area was found moderate with outstanding values of Zn, Cu and Pb (average values of 139, 50.4 and 75.6?mg?kg^?1, respectively) in sediment and dissolved Cu (average value of 2.5?µg?L^?1). Metal bioconcentration trends followed the order Zn?>?Cu?>?Cd?>?Pb for dissolved metals in seawater, Cu?>?Zn?>?Cd?>?Pb?≈?Mn?>?Fe?≈?Ni?≈?Co for metals associated to particulate matter and Zn?≈?Cu?>?Cd?>?Mn?>?Co?≈?Fe?>?Ni?≈?Pb?>?Cr for metals in the sediment. Higher values were found for copper in liver, zinc in gonads and lead in gill, showing the relationship between biotic and abiotic environment. In addition, Cd bioconcentration factors were found high in liver and gill showing the sensitivity of sole to this metal even at low concentrations.     

Assessment of the health of a river ecosystem due to the impact of pollution from industrial discharge using instrumental neutron activation analysis and inductively coupled plasma-mass spectrometry

Inductively coupled plasma-mass spectrometry (ICP-MS) and neutron activation analysis (NAA) were employed in the determination of heavy metal concentrations in water, plant and sediment samples to assess the extent of heavy metal pollution in a river system which is located within an industrial zone. Elemental concentrations of As, Pb, Hg, Cr, Cu, Cd, Ni and Zn were measured in the samples. Statistical analysis was performed on the data obtained to look for trends in the pollution pattern of these elements on the river system. The trend in concentrations of heavy metals pollution in water samples is in the order of Zn > Cu > Ni > Cr > As > Pb > Hg > Cd, whereas in plants the order is Zn > Cr > Cu > Pb > Ni > As > Hg > Cd and in sediments Zn > Cu > Pb > Ni > As > Hg.     

A comparison of an optimised sequential extraction procedure and dilute acid leaching of elements in anoxic sediments, including the effects of oxidation on sediment metal partitioning

The effect of oxidation of anoxic sediment upon the extraction of 13 elements (Cd, Sn, Sb, Pb, Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, As) using the optimised Community Bureau of Reference of the European Commission (BCR) sequential extraction procedure and a dilute acid partial extraction procedure (4 h, 1 mol L⁻¹ HCl) was investigated. Elements commonly associated with the sulfidic phase, Cd, Cu, Pb, Zn and Fe exhibited the most significant changes under the BCR sequential extraction procedure. Cd, Cu, Zn, and to a lesser extent Pb, were redistributed into the weak acid extractable fraction upon oxidation of the anoxic sediment and Fe was redistributed into the reducible fraction as expected, but an increase was also observed in the residual Fe. For the HCl partial extraction, sediments with moderate acid volatile sulfide (AVS) levels (1-100 μmol g⁻¹) showed no significant difference in element partitioning following oxidation, whilst sediments containing high AVS levels (>100 μmol g⁻¹) were significantly different with elevated concentrations of Cu and Sn noted in the partial extract following oxidation of the sediment. Comparison of the labile metals released using the BCR sequential extraction procedure (ΣSteps 1-3) to labile metals extracted using the dilute HCl partial extraction showed that no method was consistently more aggressive than the other, with the HCl partial extraction extracting more Sn and Sb from the anoxic sediment than the BCR procedure, whilst the BCR procedure extracted more Cr, Co, Cu and As than the HCl extraction.     

Availability of metals and radionuclides present in phosphogypsum and phosphate fertilizers used in Brazil

Phosphogypsum (PG) is a by-product of the phosphate fertilizer industry. In Brazil, three main phosphate industries are responsible for the production of 5.5 × 10⁶ metric tons of PG per year, which is stored in stacks. Part of this by-product can be reused to improve fertility of agricultural soils. For its safe application, it is necessary to characterize the impurities (metals and radionuclides) present in PG and to evaluate their availability to the environment. The main objectives of this paper are: to determine the total concentration of radionuclides (²²⁶Ra, ²²⁸Ra and ²¹⁰Pb) and metals (As, Cd, Cr, Co, Cu, Hg, Ni, Pb, Se, Zn) in the Brazilian PG samples using different methodologies, to evaluate the available fraction of these elements in the PG samples using a methodology with mild leaching with EDTA, to compare the results obtained for PG samples with those obtained for the most used phosphate fertilizers. The total concentration obtained for the metals using methodologies with different initial digestion (strong attack with acids and HF and mild attack with nitric acid) are slightly different. The results obtained using the methodology with mild leaching showed that the metals and radionuclides are not available to the environment, giving evidence that the application of PG in agriculture is safe as far as contamination by such elements. PG presented metals concentration lower than the phosphate fertilizers. The results obtained for the PG samples, for As, Cd, Cr, Hg, Ni, Pb and Se, are below the limits established by the Brazilian Regulatory Agency.     

Chemically modified silica gel with p-dimethylaminobenzaldehyde for selective solid-phase extraction and preconcentration of Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) by ICP-OES

Silica gel-bound amines phase modified with p-dimethylaminobenzaldehyde (p-DMABD) was prepared based on chemical immobilization technique. The product (SG-p-DMABD) was used as an adsorbent for the solid-phase extraction (SPE) Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) prior to their determination by inductively coupled plasma optical emission spectrometry (ICP-OES). The uptake behaviors of SG-p-DMABD for extracting these metal ions were studied using batch and column procedures. For the batch method, the optimum pH range for Cr(III) and Ni(II) extraction was ≥ 3, for Cu(II), Pb(II) and Zn(II) extraction it was ≥ 4. For simultaneous enrichment and determination of all the metals on the newly designed adsorbent, the pH value if 4.0 was selected. All the metal ions can be desorbed with 2.0 mL of 0.5 mol L^− 1 of HCl. The results indicate that SG-p-DMABD has rapid adsorption kinetics using the batch method. The adsorption capacity for these metal ions is in the range of 0.40-1.15 mmol g^− 1, with a high enrichment factor of 125. The presence of commonly coexisting ions does not affect the sorption capacities. The detection limits of the method were found to be 1.10, 0.69, 0.99, 1.10 and 6.50 μg L^− 1 for Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 5.0% (n = 8) for all metal ions. The method was applied to the preconcentration of Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) from the certified reference material (GBW 08301, river sediment) and water samples with satisfactory results.     

Sediment Assessment of the Pchelina Reservoir,Bulgaria

The temporal dynamics of anthropogenic impacts on the Pchelina Reservoir is assessed based on chemical element analysis of three sediment cores at a depth of about 100–130 cm below the surface water. The ¹³⁷Cs activity is measured to identify the layers corresponding to the 1986 Chernobyl accident. The obtained dating of sediment cores gives an average sedimentation rate of 0.44 cm/year in the Pchelina Reservoir. The elements’ depth profiles (Ti, Mn, Fe, Zn, Cr, Ni, Cu, Mo, Sn, Sb, Pb, Co, Cd, Ce, Tl, Bi, Gd, La, Th and U_nat) outline the Struma River as the main anthropogenic source for Pchelina Reservoir sediments. The principal component analysis reveals two groups of chemical elements connected with the anthropogenic impacts. The first group of chemical elements (Mn, Fe, Cr, Ni, Cu, Mo, Sn, Sb and Co) has increasing time trends in the Struma sediment core and no trend or decreasing ones at the Pchelina sampling core. The behavior of these elements is determined by the change of the profile of the industry in the Pernik town during the 1990s. The second group of elements (Zn, Pb, Cd, Bi and U_nat) has increasing time trends in Struma and Pchelina sediment cores. The increased concentrations of these elements during the whole investigated period have led to moderate enrichments for Pb and U_nat, and significant enrichments for Zn and Cd at the Pchelina sampling site. The moderately contaminated, according to the geoaccumulation indexes, Pchelina Reservoir surface sediment samples have low ecotoxicity.     

Determination of Occurrence Characteristics of Heavy Metals in Soil and Water Environments in Tianshan Mountains,Central Asia

China has one of the fastest-growing economies in the world, but this economic development has important implications for environmental changes in this country. Our research was to quantify the presence of heavy metals in soil and water environments in the Tianshan Mountains region of China, associated with the economic development of this region. We used anomaly analysis, correlation analysis, and principal component analysis to assess the occurrence characteristics of heavy metals in this area. Results showed that Co, Cr, As, and Ni are more prevalent in water environments than in soil environments; in contrast, Cd, Zn, Pb, Hg, and Mn are more prevalent in soil samples than in water samples. This analysis grouped 10 heavy metals in soil and water environments into three principal components. In soil environments, the prevalence order was Co, Ni, Cr, As > Mn, Zn, Pb > Hg, Cd, Cu. In water environments, the order was Cu, Co, Ni, Cr, As > Hg, Mn, Zn > Cd, Pb. It is possible to distinguish between the natural and the anthropogenic sources of heavy metals in the Tianshan Mountains. With the current rapid economic development in the Tianshan Mountains, anthropogenic sources are playing principal roles in serious heavy metal accumulations in this region. This problem warrants immediate and widespread attention to prevent further deterioration of the soil and water environments.     

Multi-elemental analysis of produced water by synchrotron radiation total reflection X-ray fluorescence

The synchrotron radiation total reflection X-ray fluorescence (SRTXRF) technique was used for the analysis of heavy metals in produced water samples from oil field in Rio Grande do Norte, in order to determine potential sources of pollution. Since the inorganic components in produced water generally resembling sea water, pre-concentration procedures have been applied to increase the concentration of the analyte of interest and to minimize the salt matrix effects. This technique allows us to determine the contents of V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Hg and Pb in 20 produced water samples. The great majority of the sampling points presented low elemental concentration value. However, in some sample, the Fe, Ni, Cu, Zn and Hg concentration were higher than the established limits by the Brazilian legislation.     

Contamination assessment of heavy metal in surface sediments of the Wuding River, northern China

The heavy metal contents and the contamination levels of the surface sediments of the Wuding River, northern China, were investigated. Heavy metal concentration ranged in μg g⁻¹: 50.15–71.91 for Cr, 408.1–442.9 for Mn, 20.11–43.59 for Ni, 17.51–20.1 for Cu, 68.32–89.57 for Zn, 0.2–0.38 for Cd and 15.08–16.14 for Pb in the Wuding River sediments. The enrichment factor (EF) and the geo-accumulation index (Igeo) demonstrated that the sediments of the Wuding River had been polluted by Cd, Cr and Ni, which mainly originated from anthropogenic sources, whereas the sediments had not been polluted by Zn, Pb, Cu and Mn, which were derived from the crust. In addition, the assessment results of EF and Igeo suggested that the sediments of the Wuding River was “moderately” polluted by Cd and “unpolluted to moderately” polluted by Cr and Ni. The elevated urban sewage discharges and agriculture fertilizers usage in river basin are the anthropogenic sources of these heavy metals in river.     

Determination of heavy metals by inductively coupled plasma-optical emission spectrometry in fish from the Piracicaba River in Southern Brazil

A total of 202 fish, representing 16 species, were collected during 2008 (March–October) in the Tanquan region of the Piracicaba River using nets. Flesh samples were collected and analyzed, using inductively coupled plasma-optical emission spectroscopy for Al, As, Cd, Co Cr, Cu, Mn, Mo, Ni, Pb, Se, Sn, Sr, and Zn. The results showed that the flesh of these fish all contained extremely high levels of Al and Sr, and moderately high levels of Cr, As, Zn, Ni, Mn and Pb. The metals were higher in these fish during rainy season, with fish collected during the months of March and October being the highest. In addition, the accumulation of metals was species-dependent. Cascudos (Hypostomus punctatus) and piranhas (Serrasalmus spilopleura) exhibited high levels of almost all of the metals, while curimbata (Prochilodus lineatus) had moderate levels. A few species, including pacu (Piaractus mesopotamicus) and dourado (Salminus maxillosus), had very low levels of most metals. The results show that the Piracicaba River Basin is widely contaminated with high levels of many toxic heavy metals, and that human consumption of some fish species is a human health concern.     

Distribution of Minor and Trace Metals in Carezza Lake (ANTARCTICA) Ecosystem

Abstract

This paper reports the distribution of a series of metals in natural samples collected at Carezza Lake in Antarctica, during the Italian Expedition in the austral summer 1989/90. The considered elements are: water, sediments and soil sampled from the surroundings of the lake and algae. The determination of the total concentration of the following metals was performed: Al, As, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Na, Ni, Pb, Zn. In addition, for sediment and soil samples, a speciation study was performed for some metals, namely Cd, Co, Cr, Cu, Fe, Mn, Ni, Zn, using the Tessier procedure.     

Multivariate optimization of a procedure for Cr and Co ultratrace determination in vegetal samples using GF AAS after cloud-point extraction

Abstract

Sediment cores were collected at the MOLAR (MOuntain LAke Research) site Jörisee. The goal of the analysis was to date the sediment cores in order to correlate actual input conditions of nutrients and pollutants at this high-alpine, remote site, to historical situations. The sediment cores were dated by determining gamma rays of Pb-210 and Cs-137. The calculated sedimentation rate is 0.1 cm/year. Leaching techniques were used to investigate redox sensitive species. The results give evidence for post depositional recycling in case of Fe and Mn. In contrast, the heavy metals Pb, Zn, Cr and Ni are not affected by existing redox gradients. Sediment samples were leached with diluted nitric acid to determine anthropogenic input of Pb, Zn, Cr and Ni. Concentrations of these heavy metals reflect changes in the input conditions since the beginning of industrialization, which is the examined time period.     

Multielemental evaluation of garbage bags by EDXRF

Garbage bags have been broadly used for collecting household waste in Brazil and worldwide. Many of these bags are made from recycled polymers, and the presence of harmful elements is a matter of concern. In this study, an energy dispersive X-ray fluorescence (EDXRF) approach for direct analysis of garbage bags is proposed. The concentrations of K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sr and Pb were determined in 14 garbage bags of different brands purchased from local markets in Piracicaba, São Paulo State, Brazil. The EDXRF technique proved to be an effective technique for multielemental, environmentally friendly and direct garbage bag monitoring. For most samples, Ca and Ti presented at minor concentration ranges and K, Cr, Mn, Fe, Ni, Cu, Zn and Pb at minor and trace levels. The EDXRF limits of quantification were K: 220; Ca: 112; Ti: 42; Cr: 19; Mn: 13; Fe: 9.2; Ni: 5.7; Cu: 5.3; Zn: 5.2; Br: 12; Rb: 20; Sr: 28 and Pb:17 μg g^–1. The samples had variable thicknesses, with a superficial density variation of 1.5 to 23% among the triplicates. The trueness of the method was checked by analysing the National Institute of Standards and Technology standard reference material SRM2783.     

A study of trace element contamination in river sediments in Serbia using microwave-assisted aqua regia digestion and multivariate statistical analysis

The aim of this study was the evaluation of the trace element contamination level in sediments of the most important rivers in Serbia and their tributaries. The determination of the aqua regia soluble contents of 12 micro- and macro-elements (Ca, Cd, Co, Cr, Cu, Fe, Mn, Pb, Ni, Zn, Be and V) in sediments was developed by the microwave digestion technique combined with inductively coupled plasma atomic emission spectrometry. Correlation analysis and principal component analysis distinguishes factors of lithogenic and anthropogenic origins. The Fe, Mn, Be and V contents are controlled by a regional lithogenic high background factor, while Cd, Cr, Pb, Ni, Zn and Cu are recognized as tracer of pollution. For Co, mixed sources from both lithogenic and anthropogenic inputs were evidenced.The investigated sediment of the major rivers and their tributaries in Serbia showed high concentrations of metals, especially of Cd, Pb, Cu and Zn, which may cause serious environmental impacts. Rivers which flow into the Danube from its entrance into Serbia significantly influence the chemical load of the water and sediments.The experimental study was conducted using two BCR standard reference materials. The calculated accuracy and precision confirmed the good performance of the adopted procedures.     

Direct determination of toxic trace metals in honey and sugars using inductively coupled plasma atomic emission spectrometry

A rapid method for the determination of Pb, Cd, Cu, Cr, Co, Ni, Mn and Zn in honey and sugars without prior digestion or ashing of the sample was developed, using inductively coupled plasma atomic emission spectrometry (ICP-AES). The critical instrumental parameters such as sample flow rate and radio frequency incident power were thoroughly optimized. The effect of matrix type and its concentration was also examined for glucose/fructose, sucrose and honey matrices. The sensitivity was investigated using calibration curves obtained in presence of the above matrices. The obtained recoveries for Cd, Cu, Cr, Co, Ni and Mn at the μg l⁻¹ level were satisfactory and practically independent of the matrix used for the calibration standards. The recoveries of Pb and Zn were less sufficient. Various commercial samples of honey, sugar, glucose and fructose were analyzed with respect to their toxic metal content. The method can be applied for routine analysis, quality and environmental pollution control purposes at the μg l⁻¹ level of concentration, after suitable dilution of the samples.     

Spatial distribution and contamination assessment of heavy metals in urban road dusts from Urumqi, NW China

This study reports the spatial distribution pattern and degree of heavy metal pollution (Cd, Cr, Cu, Ni, Pb, Mn, Be, Co, Zn and U) in 169 urban road dust samples from urban area of Urumqi city. The spatial distribution pattern shows that Cu, Pb, Cr and Zn have similar patterns of spatial distribution. Their hot-spot areas were mainly associated with main roads where high traffic density was identified. Ni and Mn show similar spatial distributions coinciding with the industrial areas, while the spatial distribution patterns of Co and U show hot-spot areas were mainly located in the sides of the urban area where the road dust was significantly influenced by natural soils. The spatial distributions of Be and Cd were very different from other metals. The geo-accumulation index suggests that road dust in Urumqi city was uncontaminated to moderately contaminated with Cd, Cu, Ni, Pb, Mn, Be, Zn and U. The integrated pollution index shows IPIs of all road dust samples were higher than 1, suggesting that the road dust quality of Urumqi city has clearly been polluted by anthropogenic emission of heavy metals. Moreover, the spatial distribution pattern of IPIs also shows several distribution trends in the studied region.     

Spatial distribution and contamination assessment of heavy metals in urban road dusts from Urumqi,NW China

This study reports the spatial distribution pattern and degree of heavy metal pollution (Cd, Cr, Cu, Ni, Pb, Mn, Be, Co, Zn and U) in 169 urban road dust samples from urban area of Urumqi city. The spatial distribution pattern shows that Cu, Pb, Cr and Zn have similar patterns of spatial distribution. Their hot-spot areas were mainly associated with main roads where high traffic density was identified. Ni and Mn show similar spatial distributions coinciding with the industrial areas, while the spatial distribution patterns of Co and U show hot-spot areas were mainly located in the sides of the urban area where the road dust was significantly influenced by natural soils. The spatial distributions of Be and Cd were very different from other metals. The geo-accumulation index suggests that road dust in Urumqi city was uncontaminated to moderately contaminated with Cd, Cu, Ni, Pb, Mn, Be, Zn and U. The integrated pollution index shows IPIs of all road dust samples were higher than 1, suggesting that the road dust quality of Urumqi city has clearly been polluted by anthropogenic emission of heavy metals. Moreover, the spatial distribution pattern of IPIs also shows several distribution trends in the studied region.     

Simultaneous determination of suspended particulate trace metals (Co, Ni, Cu, Zn, Cd and Pb) in seawater with small volume filtration assisted by microwave digestion and flow injection inductively coupled plasma mass spectrometer

A new technique for the determination of suspended particulate trace metals (P-metals >0.2 μm), such as Co, Ni, Cu, Zn, Cd and Pb, in open ocean seawater has been developed by using microwave digestion coupled with flow injection inductively coupled plasma mass spectrometry (FI-ICP-MS). Suspended particulate matter (SPM) was collected from 500 mL of seawater on a Nuclepore filter (0.2 μm) using a closed filtration system. Both the SPM and filter were completely dissolved by microwave digestion. Reagents for the digestion were evaporated using a clean evaporation system, and the metals were redissolved in 0.8 M HNO₃. The solution was diluted with buffer solution to give pH 5.0 and the metals were determined by FI-ICP-MS using a chelating adsorbent of 8-hydroxyquinoline immobilized on fluorinated metal alkoxide glass (MAF-8HQ). The procedure blanks with a filter were found to be 0.048 ± 0.008, 10.3 ± 0.3, 0.27 ± 0.05, 3.3 ± 1.8, 0.02 ± 0.03 and 0.85 ± 0.09 ng L⁻¹ for Co, Ni, Cu, Zn, Cd and Pb, respectively (n = 14). Detection limits defined as 3 times the standard deviation of the blanks were 0.023, 0.90, 0.14, 5.3, 0.078 and 0.28 ng L⁻¹ for Co, Ni, Cu, Zn, Cd and Pb, respectively. Accuracy was evaluated using certified reference materials of chlorella (NES CRM No. 3) and marine sediment (HISS-1). The method was applied to the determination of vertical distributions for P-Co, Ni, Cu, Zn, Cd and Pb in the Western North Pacific.     

黔产市售绿茶重金属的含量特征及健康风险评估

为研究黔产市售绿茶中重金属的含量分布特征及健康风险,以五个生产加工地的黔产市售绿茶为研究对象,分析其9种重金属(Pb、Cr、Cd、Hg、Cu、Zn、Mn、Ni和As)含量,利用美国环境保护署(USEPA)推荐的健康风险评价模型进行人体重金属的健康风险评价。结果表明,五种茶叶中Cr、Cd、Pb、Hg、Cu和As含量均低于国家限量标准。黔产市售绿茶的重金属浸出率大小次序为Zn>Mn>Hg>As>Cd>Pb>Cr>Cu>Ni。健康风险评价结果表明,五个产地的绿茶中重金属通过饮茶途径所产生的健康危害个人年风险大小次序为Cd>As>Mn>Ni>Cr>Hg>Pb>Zn>Cu,茶叶中重金属通过饮茶途径所产生的个人健康危害年风险总和为4.33×10-6~5.73×10-6 a-1,均低于USEPA和ICRP推荐的最大可接受风险水平,表明重金属引起的健康危害极小,其对暴露人群造成的健康危害可忽略不计,绿茶中重金属均处于安全范围内。