Molecular dynamics simulation of cocaine binding with human butyrylcholinesterase and its mutants

Molecular dynamics (MD) simulations were carried out to study cocaine binding with wild-type human butyrylcholinesterase (BChE) and its mutants based on a recently reported X-ray crystal structure of human BChE. For each BChE-cocaine system, we simulated both the nonprereactive and prereactive complexes in water. Despite the significant difference found at the acyl binding pocket, the simulated structures confirm the fundamental structural and mechanistic insights obtained from earlier computational studies of wild-type BChE with cocaine based on a homology model, e.g. the rate-determining step for BChE-catalyzed hydrolysis of biologically active (-)-cocaine is the (-)-cocaine rotation in the active site from the nonprereactive BChE-(-)-cocaine complex to the prereactive complex. It has been demonstrated that the MD simulations on both the nonprereactive and prereactive BChE-cocaine complexes can clearly reveal whether specific mutations produce the desired BChE-(-)-cocaine binding structures in which the (-)-cocaine rotation is less hindered while the required prereactive BChE-(-)-cocaine binding is maintained. Based on the MD simulations, both A328W/Y332A and A328W/Y332G BChE's are expected to have catalytic activity for (-)-cocaine hydrolysis higher than that of wild-type BChE and the activity of A328W/Y332G BChE should be slightly higher than that of A328W/Y332A BChE due to the less-hindered (-)-cocaine rotation in the mutant BChE's. However, the less-hindered (-)-cocaine rotation is only a necessary condition for a higher activity mutant BChE. The (-)-cocaine rotation is also less hindered in A328W/Y332A/Y419S BChE, but (-)-cocaine binds with A328W/Y332A/Y419S BChE in a way that is not suitable for the catalysis. Thus, A328W/Y332A/Y419S BChE is expected to lose the catalytic activity. The computational predictions were confirmed by our experimental kinetic data, demonstrating that the MD simulation-based computational protocol used in this study is reliable in prediction of the catalytic activity of BChE mutants for (-)-cocaine hydrolysis.     

Rational design of an enzyme mutant for anti-cocaine therapeutics

(-)-Cocaine is a widely abused drug and there is no available anti-cocaine therapeutic. The disastrous medical and social consequences of cocaine addiction have made the development of an effective pharmacological treatment a high priority. An ideal anti-cocaine medication would be to accelerate (-)-cocaine metabolism producing biologically inactive metabolites. The main metabolic pathway of cocaine in body is the hydrolysis at its benzoyl ester group. Reviewed in this article is the state-of-the-art computational design of high-activity mutants of human butyrylcholinesterase (BChE) against (-)-cocaine. The computational design of BChE mutants have been based on not only the structure of the enzyme, but also the detailed catalytic mechanisms for BChE-catalyzed hydrolysis of (-)-cocaine and (+)-cocaine. Computational studies of the detailed catalytic mechanisms and the structure-and-mechanism-based computational design have been carried out through the combined use of a variety of state-of-the-art techniques of molecular modeling. By using the computational insights into the catalytic mechanisms, a recently developed unique computational design strategy based on the simulation of the rate-determining transition state has been employed to design high-activity mutants of human BChE for hydrolysis of (-)-cocaine, leading to the exciting discovery of BChE mutants with a considerably improved catalytic efficiency against (-)-cocaine. One of the discovered BChE mutants (i.e., A199S/S287G/A328W/Y332G) has a approximately 456-fold improved catalytic efficiency against (-)-cocaine. The encouraging outcome of the computational design and discovery effort demonstrates that the unique computational design approach based on the transition-state simulation is promising for rational enzyme redesign and drug discovery.     

Modeling effects of oxyanion hole on the ester hydrolysis catalyzed by human cholinesterases

Molecular dynamics (MD) simulations and hydrogen bonding energy (HBE) calculations have been performed on the prereactive enzyme-substrate complexes (ES), transition states (TS1), and intermediates (INT1) for acetylcholinesterase (AChE)-catalyzed hydrolysis of acetylcholine (ACh), butyrylcholinesterase (BChE)-catalyzed hydrolysis of ACh, and BChE-catalyzed hydrolysis of (+)/(-)-cocaine to examine the protein environmental effects on the catalytic reactions. The hydrogen bonding of cocaine with the oxyanion hole of BChE is found to be remarkably different from that of ACh with AChE/BChE. Whereas G121/G116, G122/G117, and A204/A199 of AChE/BChE all can form hydrogen bonds with ACh to stabilize the transition state during the ACh hydrolysis, BChE only uses G117 and A199 to form hydrogen bonds with cocaine. The change of the estimated total HBE from ES to TS1 is ca. -5.4/-4.4 kcal/mol for AChE/BChE-catalyzed hydrolysis of ACh and ca. -1.7/-0.8 kcal/mol for BChE-catalyzed hydrolysis of (+)/(-)-cocaine. The remarkable difference of approximately 3 to 5 kcal/mol reveals that the oxyanion hole of AChE/BChE can lower the energy barrier of the ACh hydrolysis significantly more than that of BChE for the cocaine hydrolysis. These results help to understand why the catalytic activity of AChE against ACh is considerably higher than that of BChE against cocaine and provides valuable clues on how to improve the catalytic activity of BChE against cocaine.     

Understanding product specificity of protein lysine methyltransferases from QM/MM molecular dynamics and free energy simulations: the effects of mutation on SET7/9 beyond the Tyr/Phe switch

The results of hybrid quantum mechanical/molecular mechanical (QM/MM) free energy (potential of mean force) simulations for methyl-transfer processes in SET7/9 and its Y245A mutant are compared to address the question concerning the change of the product specificity as well as catalytic efficiency due to the mutation. One of the key questions is whether or not the free energy profiles of methyl transfers may be used to predict the change of the product specificity as a result of the mutations for the residues that are not located at the Tyr/Phe switch position. The simulations show that while the wild-type SET7/9 is a monomethylase, the Y245→A mutation increases the ability of the enzyme to add more methyl groups on the target lysine (i.e., acting as a trimethylase). However, the first methyl-transfer process seems to become less efficient in the mutant compared to that in wild-type. All these results are consistent with experimental observations concerning the effects of the mutation on the product specificity and catalytic efficiency. Thus, the previous suggestion that the energetics of the methyl-transfer reactions may determine the product specificity, at least in some cases, is confirmed by the present work. Moreover, the dynamic information of the reactant complexes obtained from the QM/MM molecular dynamics simulations shows that the ability of the reactant complexes to form the reactive transition-state-like configurations may be used as an important indicator for the prediction of the product specificity of PKMTs, consistent with previous computational studies.     

Fundamental reaction mechanism for cocaine hydrolysis in human butyrylcholinesterase

Butyrylcholinesterase (BChE)-cocaine binding and the fundamental pathway for BChE-catalyzed hydrolysis of cocaine have been studied by molecular modeling, molecular dynamics (MD) simulations, and ab initio calculations. Modeling and simulations indicate that the structures of the prereactive BChE/substrate complexes for (-)-cocaine and (+)-cocaine are all similar to that of the corresponding prereactive BChE/butyrylcholine (BCh) complex. The overall binding of BChE with (-)-cocaine and (+)-cocaine is also similar to that proposed with butyrylthiocholine and succinyldithiocholine, i.e., (-)- or (+)-cocaine first slides down the substrate-binding gorge to bind to Trp-82 and stands vertically in the gorge between Asp-70 and Trp-82 (nonprereactive complex) and then rotates to a position in the catalytic site within a favorable distance for nucleophilic attack and hydrolysis by Ser-198 (prereactive complex). In the prereactive complex, cocaine lies horizontally at the bottom of the gorge. The fundamental catalytic hydrolysis pathway, consisting of acylation and deacylation stages similar to those for ester hydrolysis by other serine hydrolases, was proposed on the basis of the simulated prereactive complex and confirmed theoretically by ab initio reaction coordinate calculations. Both the acylation and deacylation follow a double-proton-transfer mechanism. The calculated energetic results show that within the chemical reaction process the highest energy barrier and Gibbs free energy barrier are all associated with the first step of deacylation. The calculated ratio of the rate constant (k(cat)) for the catalytic hydrolysis to that (k(0)) for the spontaneous hydrolysis is approximately 9.0 x 10(7). The estimated k(cat)/k(0) value of approximately 9.0 x 10(7) is in excellent agreement with the experimentally derived k(cat)/k(0) value of approximately 7.2 x 10(7) for (+)-cocaine, whereas it is approximately 2000 times larger than the experimentally derived k(cat)/k(0) value of approximately 4.4 x 10(4) for (-)-cocaine. All of the results suggest that the rate-determining step of the BChE-catalyzed hydrolysis of (+)-cocaine is the first step of deacylation, whereas for (-)-cocaine the change from the nonprereactive complex to the prereactive complex is rate-determining and has a Gibbs free energy barrier higher than that for the first step of deacylation by approximately 4 kcal/mol. A further analysis of the structural changes from the nonprereactive complex to the prereactive complex reveals specific amino acid residues hindering the structural changes, providing initial clues for the rational design of BChE mutants with improved catalytic activity for (-)-cocaine.     

QM/MM metadynamics study of the direct decarboxylation mechanism for orotidine-5'-monophosphate decarboxylase using two different QM regions: acceleration too small to explain rate of enzyme catalysis

Despite decades of study, the mechanism by which orotidine-5'-monophosphate decarboxylase (ODCase) catalyzes the decarboxylation of orotidine monophosphate remains unresolved. A computational investigation of the direct decarboxylation mechanism has been performed using mixed quantum mechanical/molecular mechanical (QM/MM) dynamics simulations. The study was performed with the program CP2K that integrates classical dynamics and ab initio dynamics based on the Born-Oppenheimer approach. Two different QM regions were explored. The free energy barriers for direct decarboxylation of orotidine-5'-monophosphate (OMP) in solution and in the enzyme (using the larger QM region) were determined with the metadynamics method to be 40 and 33 kcal/mol, respectively. The calculated change in activation free energy (DeltaDeltaG++) on going from solution to the enzyme is therefore -7 kcal/mol, far less than the experimental change of -23 kcal/ mol (for k(cat.)/k(uncat.): Radzicka, A.; Wolfenden, R., Science 1995, 267, 90-92). These results do not support the direct decarboxylation mechanism that has been proposed for the enzyme. However, in the context of QM/MM calculations, it was found that the size of the QM region has a dramatic effect on the calculated reaction barrier.     

Structure-and-mechanism-based design and discovery of therapeutics for cocaine overdose and addiction

(-)-Cocaine is a widely abused drug and there is currently no available anti-cocaine therapeutic. Promising agents, such as anti-cocaine catalytic antibodies and high-activity mutants of human butyrylcholinesterase (BChE), for therapeutic treatment of cocaine overdose have been developed through structure-and-mechanism-based design and discovery. In particular, a unique computational design strategy based on the modeling and simulation of the rate-determining transition state has been developed and used to design and discover desirable high-activity mutants of BChE. One of the discovered high-activity mutants of BChE has a approximately 456-fold improved catalytic efficiency against (-)-cocaine. The encouraging outcome of the structure-and-mechanism-based design and discovery effort demonstrates that the unique computational design approach based on transition state modeling and simulation is promising for rational enzyme redesign and drug discovery. The general approach of the structure-and-mechanism-based design and discovery may be used to design high-activity mutants of any enzyme or catalytic antibody.     

Structure-based redesign of GST A2-2 for enhanced catalytic efficiency with azathioprine

Glutathione transferase (GST) A2-2 is the most efficient human enzyme in the biotransformation of the prodrug azathioprine (Aza). The activation of Aza has therapeutic potential for possible use of GSTs in targeted enzyme-prodrug treatment of diseases. Based on the assumed catalytic mechanism and computational docking of Aza to the active site of the enzyme, active-site residues were selected for construction of focused mutant libraries, which were thereafter screened for Aza activity. Mutants with elevated Aza activity were identified, DNA sequenced, and the proteins purified. The two most active mutants showed up to 70-fold higher catalytic efficiency than the parental GST A2-2. The structure of the most active triple mutant (L107G/L108D/F222H) enzyme was determined by X-ray crystallography demonstrating significant changes in the topography of the active site facilitating productive binding of Aza as a substrate.     

Comparison of 6-31G*-based MST/SCRF and FEP evaluations of the free energies of hydration for small neutral molecules

A comparison between Miertus–Scrocco–Tomasi (MST) SCRF and free energy perturbation (FEP) estimates of the free energy of hydration of eight small neutral molecules is presented. In both cases, the 6-31G* molecular electrostatic potential is used to describe the electrostatic properties of the molecules. The results demonstrate the ability of both methodologies to provide useful theoretical estimates of the total free energy of hydration; the average errors are only 1.5 kcal/mol (FEP) and 0.8 kcal/mol (MST/SCRF). The largest errors in the FEP and MST/SCRF results are less than 1.5 kcal/mol for all molecules except acetic acid, where the FEP method overestimates the free energy of hydration by 3.3 kcal/mol. © John Wiley & Sons, Inc.     

Computer simulation of the chemical catalysis of DNA polymerases: discriminating between alternative nucleotide insertion mechanisms for T7 DNA polymerase

Understanding the chemical step in the catalytic reaction of DNA polymerases is essential for elucidating the molecular basis of the fidelity of DNA replication. The present work evaluates the free energy surface for the nucleotide transfer reaction of T7 polymerase by free energy perturbation/empirical valence bond (FEP/EVB) calculations. A key aspect of the enzyme simulation is a comparison of enzymatic free energy profiles with the corresponding reference reactions in water using the same computational methodology, thereby enabling a quantitative estimate for the free energy of the nucleotide insertion reaction. The reaction is driven by the FEP/EVB methodology between valence bond structures representing the reactant, pentacovalent intermediate, and the product states. This pathway corresponds to three microscopic chemical steps, deprotonation of the attacking group, a nucleophilic attack on the P(alpha) atom of the dNTP substrate, and departure of the leaving group. Three different mechanisms for the first microscopic step, the generation of the RO(-) nucleophile from the 3'-OH hydroxyl of the primer, are examined: (i) proton transfer to the bulk solvent, (ii) proton transfer to one of the ionic oxygens of the P(alpha) phosphate group, and (iii) proton transfer to the ionized Asp654 residue. The most favorable reaction mechanism in T7 pol is predicted to involve the proton transfer to Asp654. This finding sheds light on the long standing issue of the actual role of conserved aspartates. The structural preorganization that helps to catalyze the reaction is also considered and analyzed. The overall calculated mechanism consists of three subsequent steps with a similar activation free energy of about 12 kcal/mol. The similarity of the activation barriers of the three microscopic chemical steps indicates that the T7 polymerase may select against the incorrect dNTP substrate by raising any of these barriers. The relative height of these barriers comparing right and wrong dNTP substrates should therefore be a primary focus of future computational studies of the fidelity of DNA polymerases.     

An alternative explanation for the catalytic proficiency of orotidine 5'-phosphate decarboxylase.

Orotidine 5'-phosphate decarboxylase (ODCase) is the most proficient enzyme known, enhancing the rate of decarboxylation of orotidine 5'-phosphate (OMP) by a factor of 10(17), which corresponds to a DeltaDeltaG++ of approximately 24 kcal/mol. Ground-state destabilization through local electrostatic stress has been recently proposed as the basis of catalytic rate enhancement for a mechanism that is the same as in solution. We have carried out gas-phase ab initio quantum mechanical calculations combined with a free energy method, a continuum solvent model, and molecular dynamics simulations to assess an alternative mechanism. Although we are not able to reproduce the experimentally observed DeltaDeltaG++ quantitatively, we present evidence that this DeltaDeltaG++ is very large, in the range found experimentally. We thus conclude that the preferred mechanism may well be different from that in solution, involving an equilibrium pre-protonation of OMP C5 by a catalytic lysine residue that greatly reduces the barrier to subsequent decarboxylation.     

Computational alanine scanning mutagenesis--an improved methodological approach

Alanine scanning mutagenesis of protein-protein interfacial residues can be applied to a wide variety of protein complexes to understand the structural and energetic characteristics of the hot-spots. Binding free energies have been estimated with reasonable accuracy with empirical methods, such as Molecular Mechanics/Poisson-Boltzmann surface area (MM-PBSA), and with more rigorous computational approaches like Free Energy Perturbation (FEP) and Thermodynamic Integration (TI). The main objective of this work is the development of an improved methodological approach, with less computational cost, that predicts accurately differences in binding free energies between the wild-type and alanine mutated complexes (DeltaDeltaG(binding)). The method was applied to three complexes, and a mean unsigned error of 0.80 kcal/mol was obtained in a set of 46 mutations. The computational method presented here achieved an overall success rate of 80% and an 82% success rate in residues for which alanine mutation causes an increase in the binding free energy > 2.0 kcal/mol (warm- and hot-spots). This fully atomistic computational methodological approach consists in a computational Molecular Dynamics simulation protocol performed in a continuum medium using the Generalized Born model. A set of three different internal dielectric constants, to mimic the different degree of relaxation of the interface when different types of amino acids are mutated for alanine, have to be used for the proteins, depending on the type of amino acid that is mutated. This method permits a systematic scanning mutagenesis of protein-protein interfaces and it is capable of anticipating the experimental results of mutagenesis, thus guiding new experimental investigations.     

Theoretical study of the enol imine <--> enaminone tautomeric equilibrium in organic solvents

The tautomeric enol imine <--> enaminone (phenol <--> quinone) equilibrium of the 1-hydroxy-2-naphthaldehyde Schiff base (2-phenyliminomethyl-naphthalen-1-ol) was investigated by density functional theory (B3LYP) and ab initio (MP2) methods in the IEF-PCM polarizable continuum dielectric solvent approximation and by a combined ab initio + FEP/MC study by considering an explicit solvent model. Special emphasis was put on the effect of solvation on this equilibrium by using an apolar (CCl4), polar aprotic (CH3CN), and polar protic (CH3OH) solvent. Compared with experimental tautomerization Gibbs free energies, the IEF-PCM/B3LYP calculations apparently overestimate the stability of the quinone form both when the 6-31G(d,p) and the 6-311++G(d,p) basis sets are applied. IEF-PCM/MP2 studies with the above basis sets predict the preference of the aromatic phenol tautomer, in contrast to the experiment in methanol and acetonitrile solvent. Calculation of the total relative free energy as DeltaG(tot) = DeltaE(int)(IEF-PCM/QCISD(T)/6-31G(d)) + DeltaG(solv, FEP/MC) + DeltaG(thermal) provided agreement with the experimental values up to 0.6 kcal/mol in the three solvents, and the predominant tautomer was always correctly predicted. In-solution relevant atomic charges, derived by a fit to the molecular electrostatic potential generated by the IEF-PCM/B3LYP/6-31G(d,p) wave function, show strong dependence on the fitting procedure (CHELPG or RESP) and are fairly insensitive to the chemical nature of the actual solvent. Use of the CHELPG charges in FEP/MC simulations revealed to be superior in comparison with the use of the RESP charge set.     

Calculation of relative binding affinities of fructose 1,6-bisphosphatase mutants with adenosine monophosphate using free energy perturbation method

The free energy perturbation (FEP) methodology is the most accurate means of estimating relative binding affinities between inhibitors and protein variants. In this article, the importance of hydrophobic and hydrophilic residues to the binding of adenosine monophosphate (AMP) to the fructose 1,6-bisphosphatase (FBPase), a target enzyme for type-II diabetes, was examined by FEP method. Five mutations were made to the FBPase enzyme with AMP inhibitor bound: 113Tyr --> 113Phe, 31Thr --> 31Ala, 31Thr --> 31Ser, 177Met --> 177Ala, and 30Leu --> 30Phe. These mutations test the strength of hydrogen bonds and van der Waals interactions between the ligand and enzyme. The calculated relative free energies indicated that: 113Tyr and 31Thr play an important role, each via two hydrogen bonds affecting the binding affinity of inhibitor AMP to FBPase, and any changes in these hydrogen bonds due to mutations on the protein will have significant effect on the binding affinity of AMP to FBPase, consistent to experimental results. Also, the free energy calculations clearly show that the hydrophilic interactions are more important than the hydrophobic interactions of the binding pocket of FBPase.     

A free energy calculation study of the effect of H-->F substitution on binding affinity in ligand-antibody interactions

Changes in binding affinity to catalytic antibody 6D9 of chloramphenicol phosphonate derivatives (CPDs) containing H or F were investigated by performing free energy calculations based on molecular dynamics simulations. We calculated the binding free energy, enthalpy, and entropy changes (DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS) attributable to H-->F substitution by comparing results for CPDs containing a trifluoroacetylamino group (CPD-F) or an acetylamino group (CPD-H). The calculated DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS values were -2.9, -6.3, and 3.5 kcal mol(-1) and close to experimental values observed for a series of similar ligands, chloramphenicol phosphonates with F and H (-1.4, -3.5, and 2.1 kcal mol(-1)). Therefore, CPD-F binds more strongly to 6D9 than does CPD-H. To clarify the origin of the large difference in DeltaDeltaG, we apportioned the calculated values of DeltaDeltaG and DeltaG for the associated and dissociated states into contributions from various atomic interactions. We found that the H-->F substitution increased the binding affinity mainly by decreasing the hydration free energy and not by increasing favorable interactions with the antibody. The decreased hydration free energy of the ligand was mainly due to unfavorable coulombic interactions between the trifluoroacetylamino group and solvent waters, which increased the free energy of the dissociated state (by about 3.7 kcal mol(-1)). Also, the trifluoroacetylamino group slightly increased the free energy level of the associated state (about 0.8 kcal mol(-1)) because favorable van der Waals interactions compensated for unfavorable coulombic interactions with antibody atoms. In addition, the enthalpy and entropy changes, DeltaDeltaH and -TDeltaDeltaS (computationally -6.3 and 3.5 kcal mol(-1)), originated mainly from a decrease in hydration free energy in the dissociated state. The CPD-F and CPD-H ligands had substantially different structures in the dissociated and complexed states.     

Purification and Analytical Application of <Emphasis Type="Italic">Vigna mungo</Emphasis> Chitinase for Determination of Total Fungal Load of Stored Cereals

Chitinases are glycosyl hydrolases that catalyze the hydrolysis of β-(1,4)-glycosidic bonds in chitin, the major structural polysaccharide presented in the cuticle and gut peritrophic matrix of insects. Two aspartate residues (D143, D145) and one tryptophan (W146) in the Lymantria dispar chitinase are highly conserved residues observed within the second conserved motif of the family 18 chitinase catalytic region. In this study, a chitinase cDNA, LdCht5, was cloned from L. dispar, and the roles of the three residues were investigated using site-directed mutagenesis and substituting them with three other amino acids. Seven mutant proteins, D143E, D145E, W146G, D143E/D145E, D143E/W146G, D145E/W146G, and D143E/D145E/W146G, as well as the wild-type enzyme, were produced using the baculovirus-insect cell line expression system. The enzymatic and kinetic properties of these mutant enzymes were measured using the oligosaccharide substrate MU-(GlcNAc)₃. Among the seven mutants, the D145E, D143E/D145E, and D145E/W146G mutations kept some extant catalytic activity toward MU-(GlcNAc)₃, while the D143E, W146G, D143E/W146G, and D143E/D145E/W146G mutant enzymes were inactivated. Compared with the mutant enzymes, the wild-type enzyme had higher values of k _cat and k _cat / K _m . A study of the multiple point mutations in the second conserved catalytic region would help to elucidate the role of the critical residues and their relationships.     

Single-site mutation and secondary structure stability: an isodesmic reaction approach. The case of unnatural amino acid mutagenesis Ala-->Lac

A method is described to evaluate backbone interactions in proteins via computational unnatural amino acid mutagenesis. Several N-acetyl polyalanyl amides (AcA(n)NH(2)) were optimized in the representative helical (3(10)-, 4(13)-, and a "hybrid" kappa-helix, n = 7, 9, 10, 14) and hairpin (two- and three-stranded antiparallel beta-sheets with type I turns betaalphaalphaepsilon, n = 6, 9, 10) conformations, and extended conformers of N-acetyl polyalanyl methylamides (n = 2, 3) were used to derive multistranded beta-sheet fragments. Subsequently, each residue of every model structure was substituted, one at a time, with l-lactic acid. The resulting mutant structures were again optimized, and group-transfer energies DeltaE(GT) were obtained as heats of the isodesmic reactions: AcA(n)NHR + AcOMe --> AcA(x)LacA(y)NHR + AcNHMe (R = H, CH(3)). These group-transfer energies correlate with the degree of charge polarization of the substituted peptide linkages as measured by the difference Deltae in H and O Mulliken populations in HN-C=O and with the H-bond distances in the "wild-type" structures. A good correlation obtains for the HF/3-21G and B3LYP/6-31G* group-transfer energies. The destabilization effects are interpreted in terms of loss of interstrand and intrastrand H-bonds, decrease in Lewis basicity of the C=O group, and O...O repulsion. On the basis of several comparisons of Ala --> Lac DeltaE(GT)'s with heats of the NH --> CH(2) substitutions, the latter contribution is estimated (B3LYP/6-31G*) to range between 1.5 and 2.4 kcal mol(-1), a figure close to the recent experimental DeltaDeltaG(o) value of 2.6 kcal mol(-1) (McComas, C. C.; Crowley, B. M.; Boger, D. L. J. Am.Chem. Soc. 2003, 125, 9314). The partitioning yields the following maximum values of the electronic association energy of H-bonds in the examined sample of model structures (B3LYP/6-31G* estimates): 3(10)-helix D(e) = -1.7 kcal mol(-1), alpha-helix D(e) = -3.8 kcal mol(-1), beta-sheet D(e) = -6.1 kcal mol(-1). The premise of experimental evaluations of the backbone-backbone H-bonding that Ala --> Lac substitution in proteins is isosteric (e.g., Koh, J. T.; Cornish, V. W.; Schultz, P. G. Biochemistry 1997, 36, 11314) is often but not always corroborated. Examination of the integrity of H-bonding pattern and phi(i), psi(i) distribution identified several mutants with significant distortions of the "wild-type" structure resulting inter alia from the transitions between i, i + 3 and i, i + 4 H-bonding in helices, observed previously in the crystallographic studies of depsipeptides (Ohyama, T.; Oku, H.; Hiroki, A.; Maekawa, Y.; Yoshida, M.; Katakai, R. Biopolymers 2000, 54, 375; Karle, I. L.; Das, C.; Balaram, P. Biopolymers 2001, 59, 276). Thus, the isodesmic reaction approach provides a simple way to gauge how conformation of the polypeptide chain and dimensions of the H-bonding network affect the strength of backbone-backbone C=O...HN bonds. The results indicate that the stabilization provided by such interactions increases on going from 3(10)-helix to alpha-helix to beta-sheet.     

Assembly line enzymology by multimodular nonribosomal peptide synthetases: the thioesterase domain of E. coli EntF catalyzes both elongation and cyclolactonization.

BACKGROUND: EntF is a 142 kDa four domain (condensation-adenylation-peptidyl carrier protein-thioesterase) nonribosomal peptide synthetase (NRPS) enzyme that assembles the Escherichia coli N-acyl-serine trilactone siderophore enterobactin from serine, dihydroxybenzoate (DHB) and ATP with three other enzymes (EntB, EntD and EntE). To assess how EntF forms three ester linkages and cyclotrimerizes the covalent acyl enzyme DHB-Ser-S-PCP (peptidyl carrier protein) intermediate, we mutated residues of the proposed catalytic Ser-His-Asp triad of the thioesterase (TE) domain. RESULTS: The Ser1138-->Cys mutant (kcat decreased 1000-fold compared with wild-type EntF) releases both enterobactin (75%) and linear (DHB-Ser)2 dimer (25%) as products. The His 1271-->Ala mutant (kcat decreased 10,000-fold compared with wild-type EntF) releases only enterobactin, but accumulates both DHB-Ser-O-TE and (DHB-Ser)2-O-TE acyl enzyme intermediates. Electrospray ionization and Fourier transform mass spectrometry of proteolytic digests were used to analyze the intermediates. CONCLUSIONS: These results establish that the TE domain of EntF is both a cyclotrimerizing lactone synthetase and an elongation catalyst for ester-bond formation between covalently tethered DHB-Ser moieties, a new function for chain-termination TE domains found at the carboxyl termini of multimodular NRPSs and polyketide synthases.     

Catalytically enhanced endocellulase cel5a from Acidothermus cellulolyticus

When Tyr245 in endocellulase Cel5A from Acidothermus cellulolyticus was changed to Gly (Y245G) by designed mutation, the value of K _i for inhibition of the enzyme by the product cellobiose was increased more than 1480%. This reduction in product inhibition enabled the mutant enzyme (used in conjunction with Trichoderma reesei cellobiohydrolase-I) to release soluble sugars from biomass cellulose at a rate as much as 40% greater than that achieved by the wild-type (WT) enzyme. The mutant was designed on the basis of the previously published crystal structure of the WT enzyme/substrate complex (at a resolution of 2.4 Å), which provided insights into the enzyme mechanism at the atomic level and identified Tyr245 as a key residue interacting with a leaving group. To determine the origin of the change in activity, the crystal structure of Y245G was solved at 2.4-Å resolution to an R-factor of 0.19 (R-free=0.25). To obtain additional information on the enzyme-product interactions, density functional calculations were performed on representative fragments of the WT Cel5A and Y245G. The combined results indicate that the loss of the platform (Y245G) and of a hydrogen bond (from a conformational change in Gln247) reduces the binding energy between product and enzyme by several kilo calories per mole. Both kinetic and structural analyses thus relate the increased enzymatic activity to reduced product inhibition.     

Resolution of chiral phosphate, phosphonate, and phosphinate esters by an enantioselective enzyme library

An array of 16 enantiomeric pairs of chiral phosphate, phosphonate, and phosphinate esters was used to establish the breadth of the stereoselective discrimination inherent within the bacterial phosphotriesterase and 15 mutant enzymes. For each substrate, the leaving group was 4-hydroxyacetophenone while the other two groups attached to the phosphorus core consisted of an asymmetric mixture of methyl, methoxy, ethyl, ethoxy, isopropoxy, phenyl, phenoxy, cyclohexyl, and cyclohexoxy substituents. For the wild-type enzyme, the relative rates of hydrolysis for the two enantiomers ranged from 3 to 5.4 x 10(5). Various combinations of site-specific mutations within the active site were used to create modified enzymes with alterations in their enantioselective properties. For the single-site mutant enzyme, G60A, the stereoselectivity is enhanced relative to that of the wild-type enzyme by 1-3 orders of magnitude. Additional mutants were obtained where the stereoselectivity is inverted relative to the wild-type enzyme for 13 of the 16 pairs of enantiomers tested for this investigation. The most dramatic example was obtained for the hydrolysis of 4-acetylphenyl methyl phenyl phosphate. The G60A mutant preferentially hydrolyzes the SP-enantiomer by a factor of 3.7 x 10(5). The I106G/F132G/H257Y mutant preferentially hydrolyzes the RP-enantiomer by a factor of 9.7 x 10(2). This represents an enantioselective discrimination of 3.6 x 10(8) between these two mutants, with a total of only four amino acid changes. The rate differential between the two enantiomers for any given mutant enzyme is postulated to be governed by the degree of nonproductive binding within the enzyme active site and stabilization of the transition state. This hypothesis is supported by computational docking of the high-energy, pentavalent form of the substrates to modeled structures of the mutant enzyme; the energies of the docked transition-state analogues qualitatively capture the enantiomeric preferences of the various mutants for the different substrates. These results demonstrate that the catalytic properties of the wild-type phosphotriesterase can be exploited for the kinetic resolution of a wide range of phosphate, phosphonate, and phosphinate esters and that the active site of this enzyme is remarkably amenable to structural perturbations via amino acid substitution.