Thermodynamics of the oxidation–reduction reaction {2 glutathionered(aq) + NADPox(aq)=glutathioneox(aq) + NADPred(aq)}

Microcalorimetry, spectrophotometry, and high-performance liquid chromatography (h.p.l.c.) have been used to conduct a thermodynamic investigation of the glutathione reductase catalyzed reaction {2 glutathione_red(aq) + NADP_ox(aq)=glutathione_ox(aq) + NADP_red(aq)}. The reaction involves the breaking of a disulfide bond and is of particular importance because of the role glutathione_red plays in the repair of enzymes. The measured values of the apparent equilibrium constant K^′ for this reaction ranged from 0.5 to 69 and were measured over a range of temperature (288.15 K to 303.15 K), pH (6.58 to 8.68), and ionic strength I_m (0.091 mol · kg⁻¹ to 0.90 mol · kg⁻¹). The results of the equilibrium and calorimetric measurements were analyzed in terms of a chemical equilibrium model that accounts for the multiplicity of ionic states of the reactants and products. These calculations led to values of thermodynamic quantities at T=298.15 K and I_m=0 for a chemical reference reaction that involves specific ionic forms. Thus, for the reaction {2 glutathione_red⁻(aq) + NADP_ox³⁻(aq)=glutathione_ox²⁻(aq) + NADP_red⁴⁻(aq) + H⁺(aq)}, the equilibrium constant K=(6.5±4.4)·10⁻¹¹, the standard molar enthalpy of reaction Δ_rH^o_m=(6.9±3.0) kJ · mol⁻¹, the standard molar Gibbs free energy change Δ_rG^o_m=(58.1±1.7) kJ · mol⁻¹, and the standard molar entropy change Δ_rS^o_m=−(172±12) J · K⁻¹ · mol⁻¹. Under approximately physiological conditions (T=311.15 K, pH=7.0, and I_m=0.25 mol · kg⁻¹ the apparent equilibrium constant K^′≈0.013. The results of the several studies of this reaction from the literature have also been examined and analyzed using the chemical equilibrium model. It was found that much of the literature is in agreement with the results of this study. Use of our results together with a value from the literature for the standard electromotive force E^o for the NADP redox reaction leads to E^o=0.166 V (T=298.15 K and I=0) for the glutathione redox reaction {glutathione_ox²⁻(aq) + 2 H⁺(aq) + 2 e⁻=2 glutathione_red⁻(aq)}. The thermodynamic results obtained in this study also permit the calculation of the standard apparent electromotive force E^′o for the biochemical redox reaction {glutathione_ox(aq) + 2 e⁻=2 glutathione_red(aq)} over a wide range of temperature, pH, and ionic strength. At T=298.15 K, I=0.25 mol · kg⁻¹, and pH=7.0, the calculated value of E^′o is −0.265 V.     

A Raman scattering study of structural changes in LaMn1−xCoxO3+δ system

We present results of Raman scattering studies on LaMn_1−xCo_xO_3+δ over a wide range of doping content (x = 0.1–0.75) and temperature range of 20–300 K. Powder X-ray diffraction patterns show that there is a structural change from orthorhombic to rhombohedral at x = 0.5 as x increases. Raman spectra of all LaMn_1−xCo_xO_3+δ samples show peaks near 260, 500, and 650 cm⁻¹. However, the Raman spectra are not drastically different from each other across the structural phase transition at x = 0.5. On the other hand, the peak frequencies of the modes near 260 and 500 cm⁻¹ as functions of Co content (x) show slope changes at x = 0.5. The full-width at the half-maximum (FWHM) of the mode near 650 cm⁻¹ as a function of Co content (x) shows minimum at x = 0.5. Normally, larger values of FWHM are expected at near x = 0.5, if the mode were affected by the structural disorder at the phase boundary. Therefore, it is likely due to lowest charge concentration at x = 0.5, which results in lowest screening effect. This is consistent with the fact that the intensity of the phonons is strongest at x = 0.5. As the temperature decreases, the two peaks near 500 and 650 cm⁻¹ of different Co contents, related with octahedral distortions, are found to shift to lower frequencies unlike the usual temperature behavior. However, no abrupt change in the peak frequencies and the FWHM is observed across measured temperature range, regardless of the Co content.     

Buffer standards for the physiological pH of the zwitterionic compound of 3-(N-morpholino)propanesulfonic acid (MOPS) from T = (278.15 to 328.15) K

This paper reports the pH values of five NaCl-free buffer solutions and 11 buffer compositions containing NaCl at I = 0.16 mol · kg⁻¹. Conventional pa_H values are reported for 16 buffer solutions with and without NaCl salt. The operational pH values have been calculated for five buffer solutions and are recommended as pH standards at T = (298.15 and 310.15) K after correcting the liquid junction potentials. For buffer solutions with the composition m₁ = 0.04 mol · kg⁻¹, m₂ = 0.08 mol · kg⁻¹, m₃ = 0.08 mol · kg⁻¹ at I = 0.16 mol · kg⁻¹, the pH at 310.15 K is 7.269, which is close to 7.407, the pH of blood serum. It is recommended as a pH standard for biological specimens.     

Molecular spin ladders self-assembly from [Ni(dmit)2]− building blocks: Syntheses,structures and magnetic properties

Two ion-pair compounds, consisting of 1-(4′-R-benzyl)pyridinium ([RBzPy]⁺, R = NO₂ (1) and Br (2)) and [Ni(dmit)₂]⁻ (dmit²⁻ = 2-thioxo-1,3-dithion-4,5-dithiolato), have been synthesized and structurally characterized. The anions of [Ni(dmit)₂]⁻ stack into dimers, which further construct into two-leg ladder through terminal S⋯S interactions in 1, lateral S⋯S interactions in 2. The weak H-bonding interactions of C–H⋯S were observed in 2, while only weak van de Waals interactions between anion and cations in 1. The magnetic susceptibilities measured in 2–300 K indicate AFM exchange interaction domination both two compounds. A peculiar magnetic transition at ∼100 K was observed in 1. An AFM ordering below ∼11 K was found in 2, and the best fit to magnetic susceptibility above 45 K in this compound, using a dimer model with s = 1/2, give rise to Δ/k_B = 36.1 K, zJ = −0.91 K, C = 3.2 × 10⁻³ emu K mol⁻¹ and χ₀ = −4.0 × 10⁻⁶ emu mol⁻¹ with g of 2.0 fixed.     

Electrochemical properties of Li(Li(1−x)/3CoxMn(2−2x)/3)O2 (0 ⩽ x ⩽ 1) solid solutions prepared by poly-vinyl alcohol (PVA) method

The whole range of solid solutions Li(Li_(1−x)/3Co_xMn_(2−2x)/3)O₂ (0 ⩽ x ⩽ 1) was firstly synthesized by an aqueous solution method using poly-vinyl alcohol as a synthetic agent to investigate their structure and electrochemical properties. X-ray diffraction results indicated that the synthesized solid solutions showed a single phase without any detectable impurity phase and have a hexagonal structure with some additional peaks caused by monoclinic distortion, especially in the solid solutions with a low Co amount. In the electrochemical examination, the solid solutions in the range between 0.2 ⩽ x ⩽ 0.9 showed higher discharge capacity and better cyclability than LiCoO₂ (x = 1) on cycling between 2.0 and 4.6 V with 100 mA g⁻¹ at 25 °C. For example, Li(Li_0.2Co_0.4Mn_0.4)O₂ (x = 0.4) exhibited a high discharge capacity of 180 mA h g⁻¹ at the 50th cycle. By synthesizing the solid solution between Li₂MnO₃ and LiCoO₂, the electrochemical properties of the end members were improved.     

Isopiestic determination of the osmotic and activity coefficients of Rb 2SO4 (aq) and Cs 2SO 4(aq) at T = (298.15 and 323.15) K,and representation with an extended ion-interaction (Pitzer) model

Isopiestic vapor-pressure measurements were made for Rb ₂SO ₄(aq) from molalitym =  (0.16886 to 1.5679 )mol · kg ^− 1atT =  298.15 K and from m =  (0.32902 to 1.2282 )mol · kg ^− 1at T =  323.15 K, and for Cs ₂SO₄ (aq) from m =  (0.11213 to 3.10815 )mol · kg ^− 1at T =  298.15 K and fromm =  (0.11872 to 3.5095 )mol · kg ^− 1atT =  323.15 K, with NaCl(aq) as the reference standard. Published thermodynamic information for these systems were reviewed and the isopiestic equilibrium molalities and dilution enthalpies were critically assessed and recalculated in a consistent manner. Values of the four parameters of an extended version of Pitzer`s model for osmotic and activity coefficients with an ionic-strength dependent third virial coefficient were evaluated for both systems at both temperatures, as were those of the usual three-parameter Pitzer model. Similarly, parameters of Pitzer`s model for the relative apparent molar enthalpies of dilution were evaluated at T =  298.15 K for both Rb ₂SO ₄(aq) and Cs ₂SO ₄(aq) for the more restricted range of m⩽ 0.101 mol · kg ^− 1. Values of the thermodynamic solubility product K_s(Rb₂ SO ₄, cr, 298.15 K )  =  (0.1392  ±  0.0154) and the CODATA compatible standard molar Gibbs free energy of formationΔ_fG_m^o (Rb ₂SO ₄, cr, 298.15 K )  =  − (1316.91  ±  0.59)kJ · mol ^− 1, standard molar enthalpy of formationΔ_fH_m^o (Rb ₂SO ₄, cr, 298.15 K )  =  − (1435.07  ±  0.60)kJ · mol ^− 1, and standard molar entropy S _m^o(Rb₂ SO ₄, cr, 298.15 K )  =  (199.60  ±  2.88)J · K ^− 1· mol ^− 1were derived. A sample of one of the lots of Rb ₂SO ₄(s) used for part of our isopiestic measurements was analyzed by ion chromatography, and was found to be contaminated with potassium and cesium in amounts that significantly exceeded the claims of the supplier. In contrast, analysis by ion chromatography of a lot of Cs ₂SO ₄(s) used for some of our experiments showed it was highly pure.     

Redox behavior and transport properties of La0.5−2xCexSr0.5+xFeO3−δ and La0.5−2ySr0.5+2yFe1−yNbyO3−δ perovskites

The effects of doping the mixed-conducting (La,Sr)FeO_3−δ system with Ce and Nb have been examined for the solid-solution series, La_0.5−2xCe_xSr_0.5+xFeO_3−δ (x = 0–0.20) and La_0.5−2ySr_0.5+2yFe_1−yNb_yO_3−δ (y = 0.05–0.10). Mössbauer spectroscopy at 4.1 and 297 K showed that Ce⁴⁺ and Nb⁵⁺ incorporation suppresses delocalization of p-type electronic charge carriers, whilst oxygen nonstoichiometry of the Ce-containing materials increases. Similar behavior was observed for La_0.3Sr_0.7Fe_0.90Nb_0.10O_3−δ at 923–1223 K by coulometric titration and thermogravimetry. High-temperature transport properties were studied with Faradaic efficiency (FE), oxygen-permeation, thermopower and total-conductivity measurements in the oxygen partial pressure range 10⁻⁵–0.5 atm. The hole conductivity is lower for the Ce- and Nb-containing perovskites, primarily as a result of the lower Fe⁴⁺ concentration. Both dopants decrease oxide-ion conductivity but the effect of Nb-doping on ionic transport is moderate and ion-transference numbers are higher with respect to the Nb-free parent phase, 2.2 × 10⁻³ for La_0.3Sr_0.7Fe_0.9Nb_0.1O_3−δ cf. 1.3 × 10⁻³ for La_0.5Sr_0.5FeO_3−δ at 1223 K and atmospheric oxygen pressure. The average thermal expansion coefficients calculated from dilatometric data decrease on doping, varying in the range (19.0–21.2) × 10⁻⁶ K⁻¹ at 780–1080 K.     

In-plane chemical pressure in (U1−yCey)O2 studied by Raman spectroscopy

We investigate the nature of bonding and charge states in (U_1−yCe_y)O₂ (y = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) by Raman spectroscopy. Raman spectrum of UO₂ exhibits two prominent bands below 1000 cm⁻¹, a F_2g mode at 446 cm⁻¹ and a F_1u LO mode at 578 cm⁻¹. As y is increased from 0 to 0.6, the F_1u exhibits a large blue shift of 90 cm⁻¹, and from y = 0.6 to 1.0, a red shift of 54 cm⁻¹. We show that our results can be interpreted as arising from anisotropic compression/relaxation of the lattice under Ce substitution and this can give an indication of its charge states. Alternate interpretations have been given in the literature on the effect of substituents and dopants to the Raman spectra of UO₂ and CeO₂. The present interpretation of chemical stress effects can be taken as another plausible explanation.     

Synthesis,crystal structure,spectroscopy and magnetism of a trinuclear nickel(II) complex with 3,5-pyrazoledicarboxylic acid as bridge ligands

A new complex of [Ni₃(dcp)₂(H₂O)₁₀] (1) (H₃dcp = 3,5-pyrazoledicarboxylic acid) has been synthesized from H₃dcp and Ni(NO₃)₂·6H₂O by hydrothermal reaction. Complex 1 has the discrete trinuclear structure. Three Ni(II) ions are bridged by two dcp³⁻ ligands, with 10 coordinated water molecules as terminal ligands. The molecules of [Ni₃(dcp)₂(H₂O)₁₀] extend into three-dimensional supramolecular architectures by intermolecular O–H···O hydrogen bonds as well as π-π stacking interactions. Magnetic susceptibility measurement shows that a weak antiferromagnetic interaction is operative between nickel(II) ions and an excellent simulation of the experimental data gives D = 5.27 cm⁻¹, J = −2.19 cm⁻¹ and g = 2.05.     

Magnetic properties of hybrid organo-inorganic copper(II) oxovanadate(V) phosphate and phosphonate bridged systems

The hybrid organo-inorganic compounds [Cu₄(bipy)₄V₄O₁₁(PO₄)₂]nH₂O (n ∼ 5) (1), [Cu₂(phen)₂(PO₄)(H₂PO₄)₂(VO₂) · 2H₂O] (2) and [Cu₂(phen)₂(O₃PCH₂PO₃)(V₂O₅) (H₂O)]H₂O (3) which present different bridging forms of the phosphate/phosphonate group, show different bulk magnetic properties. We herein analyze the magnetic behaviour of these compounds in terms of their structural parameters. We also report a theoretical study for compound (1) assuming four different magnetic exchange pathways between the copper centres present in the tetranuclear unit. For compound (1) the following J values were obtained J₁ = +3.29; J₂ = −0.63; J₃ = −2.23; J₄ = −46.14 cm⁻¹. Compound (2) presents a Curie–Weiss behaviour in the whole range of temperature (3–300 K), and compound (3) shows a maximum for the magnetic susceptibility at 64 K, typical for antiferromagnetic interactions. These data where fitted using a model previously reported in the literature, assuming two different magnetic exchange pathways between the four copper(II) centres, with J₁ = −30.0 and J₂ = −8.5 cm⁻¹.     

Enantiomeric recognition of amino acid derivatives by chiral schiff bases of calix[4]arene

Novel calix[4]arene Schiff bases bearing chiral substituents both on the upper and the lower rims have been developed. These chiral receptors exhibit good chiral recognition ability towards α-amino acid ester hydrochlorides (up to K_D/K_L = 4.36, ΔΔG₀ = − 3.65 kJ mol⁻¹) in CHCl₃. The molecular recognition abilities and enantioselectivities for guests are also discussed from a thermodynamic point of view.     

Apparent molar heat capacities and apparent molar volumes ofY2(SO4)3(aq),La2(SO4)3(aq),Pr2(SO4)3(aq),Nd2(SO4)3(aq),Eu2(SO4)3(aq),Dy2(SO4)3(aq),Ho2(SO4)3(aq), andLu2(SO4)3(aq)atT = 298.15 K andp = 0.1 MPa

The apparent molar heat capacities C_{p, φ} ^∘ and apparent molar volumes V_φ ^∘ of Y₂(SO₄)₃(aq), La₂(SO₄)₃(aq), Pr₂(SO₄)₃(aq), Nd₂(SO₄)₃(aq), Eu₂(SO₄)₃(aq), Dy₂(SO₄)₃(aq), Ho₂(SO₄)₃(aq), and Lu₂(SO₄)₃(aq) were measured at T =  298.15 K and p =  0.1 MPa with a Sodev (Picker) flow microcalorimeter and a Sodev vibrating-tube densimeter, respectively. These measurements extend from lower molalities of m =  (0.005 to 0.018) mol ·kg ^− 1to m =  (0.025 to 0.434) mol ·kg ^− 1, where the upper molality limits are slightly below those of the saturated solutions. There are no previously published apparent molar heat capacities for these systems, and only limited apparent molar volume information. Considerable amounts of the R SO₄ ⁺ (aq) and R(SO₄)₂ ⁻ (aq) complexes are present, where R denotes a rare-earth, which complicates the interpretation of these thermodynamic quantities. Values of the ionic molar heat capacities and ionic molar volumes of these complexes at infinite dilution are derived from the experimental information, but the calculations are necessarily quite approximate because of the need to estimate ionic activity coefficients and other thermodynamic quantities. Nevertheless, the derived standard ionic molar properties for the various R SO₄ ⁺ (aq) and R(SO₄)₂ ⁻ (aq) complexes are probably realistic approximations to the actual values. Comparisons indicate that V_φ ^∘ {RSO₄ ⁺ , aq, 298.15K}  =  − (6  ±  4)cm³· mol ^− 1and V_φ ^∘ {R(SO₄)₂ ⁻ , aq, 298.15K}  =  (35  ±  3)cm³· mol ^− 1, with no significant variation with rare-earth. In contrast, values of C_{p, φ} ^∘ { RSO₄ ⁺ , aq, 298.15K } generally increase with the atomic number of the rare-earth, whereas C_{p, φ} ^∘ { R(SO₄)₂ ⁻ , aq, 298.15K } shows a less regular trend, although its values are always positive and tend to be larger for the heavier than for the light rare earths.     

Electron paramagnetic resonance and optical studies of Cu2+ doped bis(thiourea)cadmium chloride single crystal

Electron paramagnetic resonance (EPR) and optical studies have been carried out on Cu²⁺ doped bis(thiourea)cadmium chloride single crystal, which belongs to a potential semi-organic non-linear material, at room temperature. The spin Hamiltonian parameters were determined as g_xx = 2.04331, g_yy = 2.04373, g_zz = 2.05750 and A_xx = 91G, A_yy = 115G, A_zz = 136G. These parameters suggest that the spectroscopic splitting parameter g and hyperfine splitting parameter A exhibit rhombic symmetry. The optical study reveals that the non-linear optical property of the host lattice has been enhanced due to Cu²⁺ doping.     

Identification of a new family of phosphate compounds,AIBII6(P2O7)2P3O10: structures of KMn6(P2O7)2P3O10 and AgMn6(P2O7)2P3O10

Two members of a new family of inorganic phosphates of general formula A^IB^II₆(P₂O₇)₂P₃O₁₀; KMn₆(P₂O₇)₂P₃O₁₀ (a=5.405(2), b=26.918(11), c=6.660(5), β=107.31(3)°, V=925.1(9) Å³, space group P2₁/m, Z=2, D_calc=3.481 Mg m⁻³, R=0.0377 for 2235 observed reflections) and AgMn₆(P₂O₇)₂P₃O₁₀ (a=5.424(7), b=26.97(4), c=6.627(9), β=106.81(7)°, V=928(2) Å³, space group P2₁/m, Z=2, D_calc=3.716 Mg m⁻³, R=0.0594 for 1577 observed reflections) have been synthesized and identified by single crystal X-ray diffraction. The isostructural complexes present an interesting comparison of silver and potassium bonding.     

Buffer standards for the physiological pH of N-[2-hydroxy-1,1-bis(hydroxymethyl)ethyl]glycine (TRICINE) from T = (278.15 to 328.15) K

The pH values of two buffer solutions without NaCl and seven buffer solutions with added NaCl, having ionic strengths (I = 0.16 mol · kg⁻¹) similar to those of physiological fluids, have been evaluated at 12 temperatures from T = (278.15 to 328.15) K by way of the extended form of the Debye–Hückel equation of the Bates–Guggenheim convention. The residual liquid junction potentials (δE_j) between the buffer solutions of TRICINE and saturated KCl solution of the calomel electrode at T = (298.15 and 310.15) K have been estimated by measurement with a flowing junction cell. For the buffer solutions with the molality of TRICINE(m₁) = 0.06 mol · kg⁻¹, NaTRICINE(m₂) = 0.02 mol · kg⁻¹, and NaCl(m₃) = 0.14 mol · kg⁻¹, the pH values at T = 310.15 K obtained from the extended Debye–Hückel equation and the inclusion of the liquid junction correction are 7.342 and 7.342, respectively. These are in excellent agreement. The zwitterionic buffer TRICINE is recommended as a secondary pH standard in the region for clinical application.     

Thermochemistry of the biochemical reaction: { pyrophosphate(aq) + H2O(l) = 2 phosphate(aq)}

Calorimetric enthalpies of reaction have been measured for the overall biochemical reaction{pyrophosphate(aq)  +  H₂O(l)  =  2phosphate (aq)} . The reaction was catalyzed by alkaline phosphatase and, to simplify the thermochemistry, was carried out in the absence of Mg ^2 + (aq). Measurements were performed with phosphate buffer ( pH  =  7.19 and 7.94), PIPES buffer ( pH  =  7.13), and HEPES buffer ( pH  =  7.86). The results of these measurements were analyzed by using an equilibrium model. These calculations lead to the standard molar enthalpy changeΔ_rH_m^o =  − (17.3  ±  0.6)kJ·mol ^− 1 (temperature T =  298.15 K and ionic strengthI =  0) for the reference reaction{HP₂O₇^3 − (aq)  +  H₂O(l)  =  2HPO₄^2 − (aq)  +  H ⁺ (aq)} . Values of the apparent equilibrium constantK^′ for the overall biochemical reaction from the literature were also analyzed by using the equilibrium model in order to obtain what is believed to be a reliable value for the equilibrium constantK =  4.7 · 10 ^− 4 for the reference reaction. The values ofK and Δ_rH_m^o for the reference reaction have been used together with values from the CODATA tables to calculate standard molar formation properties for the pyrophosphate species.     

Magnetic and theoretical characterization of a ferromagnetic Mn(III) dimer

Reaction of 1,1,1-tris(hydroxymethyl)ethane (H₃thme) with the complex [Mn₂O₂(bpy)₄](ClO₄)₃ produces the dimeric species [Mn₂(Hthme)₂(bpy)₂](ClO₄)₂ in high yield. Magnetic measurements in the temperature range 1.8–300 K and in fields up to 7 T reveal weak ferromagnetic exchange between the metal centres with J = +2.13 cm⁻¹. A fit of the magnetization data, assuming only the ground state is populated, gives S = 4, g = 1.71 and D = −0.65 cm⁻¹. Low temperature single crystal measurements suggest the co-existence of SMM behaviour and strong intermolecular interactions. Density functional calculations also support a weak exchange interaction between the Mn ions.     

Novel poly (neutral red) nanowires as a sensitive electrochemical biosensing platform for hydrogen peroxide determination

Poly (neutral red) nanowires (PNRNWs) have been synthesized for the first time by the method of cyclic voltammetric electrodeposition using porous anodic aluminum oxide (AAO) template and were examined by scanning electron microscopy (SEM) and transmission electron microscope (TEM). Moreover, horseradish peroxidase (HRP) was encapsulated in situ in PNRNWs (denoted as PNRNWs–HRP) by electrochemical copolymerization for potential biosensor applications. The PNRNWs showed excellent efficiency of electron transfer between the HRP and the glassy carbon (GC) electrode for the reduction of H₂O₂ and the PNRNWs–HRP modified GC electrode showed to be excellent amperometric sensors for H₂O₂ at −0.1 V with a linear response range of 1 μM to 8 mM with a correlation coefficient of 0.996. The detection limit (S/N = 3) and the response time were determined to be 1 μM and <5 s and the high sensitivity is up to 318 μA mM⁻¹ cm⁻².     

(Solid + solute) phase equilibria in aqueous solution. XIII. Thermodynamic properties of hydrozincite and predominance diagrams for (Zn2 + + H2O + CO2)

The thermodynamic properties ofZn₅(OH)₆(CO₃)₂ , hydrozincite, have been determined by performing solubility and d.s.c. measurements. The solubility constant in aqueous NaClO₄media has been measured at temperatures ranging from 288.15 K to 338.15 K at constant ionic strength (I =  1.00 mol · kg ^− 1). Additionally, the dependence of the solubility constant on the ionic strength has been investigated up to I =  3.00 mol · kg ^− 1NaClO₄at T =  298.15 K. The standard molar heat capacity C_{p, m}^ofunction fromT =  318.15 K to T =  418.15 K, as well as the heat of decomposition of hydrozincite, have been obtained from d.s.c. measurements. All experimental results have been simultaneously evaluated by means of the optimization routine of ChemSage yielding an internally consistent set of thermodynamic data (T =  298.15 K): solubility constant log ^* K_{ps 0}⁰ =  (9.0  ±  0.1), standard molar Gibbs energy of formationΔ_fG_m^o {Zn₅(OH)₆(CO₃)₂ }  =  ( − 3164.6  ±  3.0)kJ · mol ^− 1, standard molar enthalpy of formation Δ_fH_m^o{Zn₅(OH)₆(CO₃)₂ }  =  ( − 3584  ±  15)kJ · mol ^− 1, standard molar entropy S_m^o{Zn₅(OH)₆(CO₃)₂ }  =  (436  ±  50)J · mol ^− 1· K ^− 1and C_p,m^o / (J · mol ^− 1· K ^− 1)  =  (119  ±  11)  +  (0.834  ±  0.033)T / K. A three-dimensional predominance diagram is introduced which allows a comprehensive thermodynamic interpretation of phase relations in(Zn^2 +  +  H₂O  +  CO₂) . The axes of this phase diagram correspond to the potential quantities: temperature, partial pressure of carbon dioxide and pH of the aqueous solution. Moreover, it is shown how the stoichiometric composition{n(CO₃) / n(Zn)} of the solid compoundsZnCO₃ and Zn₅(OH)₆(CO₃)₂can be checked by thermodynamically analysing the measured solubility data.     

The investigation of thermodynamic parameters of kinetic reaction between o-phenylenediamine and gold (III)

A visible spectrophotometric method has been developed for the reaction kinetics of o-phenylenediamine in the presence of gold (III). The method is based on the measurement of the absorbance of the reaction o-phenylenediamine and gold (III). Optimum conditions for the reaction were established as pH 6 at λ = 466 nm.When the reaction kinetic of o-phenylenediamine by gold (III) was investigated, it was observed that the following rate formula was found as ln (A/A₀) = −kt, according to absorbance measurements. The activation energy E_a and Arrhenius constant A were calculated from the Arrhenius equation as 1.009 kJ · mol⁻¹ and 3.46 · 10⁻² s⁻¹, respectively. Other activation thermodynamic parameters, entropy, ΔS (J · mol⁻¹ · K⁻¹), enthalpy, ΔH (kJ · mol⁻¹), Gibbs free energy, ΔG (kJ · mol⁻¹) and equilibrium constant, K_e were calculated at T = (283.2, 303.2, 323.2, and 343.2) K. The study was exothermic due to the decrease of entropy and was a non-spontaneous process during activation.