Boron-Dipyrromethene-Based Fluorescent Emitters Enable High-Performance Narrowband Red Organic Light-Emitting Diodes

Narrowband organic light-emitting diodes (OLEDs) are receiving significant attention and have demonstrated impressive performance in blue and green OLEDs. However, developing high-performance narrowband red OLEDs remains a highly desired yet challenging task. Herein, we have developed narrowband red fluorescent emitters by utilizing a boron-dipyrromethene (BODIPY) skeleton in combination with a methyl-shield strategy. These emitters exhibit small full-width at half-maxima (FWHM) ranging from 21 nm (0.068 eV) to 25 nm (0.081 eV) and high photoluminescence quantum yields (Φ_PL) ranging from 88.5 % to 99.0 % in toluene solution. Using BODIPY-based luminescent materials as emitters, high-performance narrowband red OLEDs have been assembled with external quantum efficiency as high as 18.3 % at 623 nm and 21.1 % at 604 nm. This work represents, to our knowledge, the first successful case of achieving NTSC pure-red OLEDs with the Commission Internationale de l’Éclairage (CIE) coordinates of [0.67, 0.33] based on conventional fluorescent emitters.     

Narrowband Near-Infrared Multiple-Resonance Thermally Activated Delayed Fluorescence Emitters towards High-Performance and Stable Organic Light-Emitting Diodes

Multiple-resonance thermally activated delayed fluorescence (MR-TADF) materials are highly coveted for their high efficiency and narrowband emission in organic light-emitting diodes (OLEDs). Nevertheless, the development of near-infrared (NIR) MR-TADF emitters remains a formidable challenge. In this study, we design two new NIR MR-TADF emitters, PXZ−R−BN and BCz−R−BN, by embedding 10H-phenoxazine (PXZ) and 7H-dibenzo[c,g]carbazole (BCz) fragments to increase the electron-donating ability or extending π-conjugation on the framework of para-boron fusing polycyclic aromatic hydrocarbons (PAHs). Both compounds emit in the NIR region, with a full-width at half-maximum (FWHM) of 49 nm (0.13 eV) for PXZ−R−BN and 43 nm (0.11 eV) for BCz−R−BN in toluene. To sensitize the two NIR MR-TADF emitters in OLEDs, a new platinum complex, Pt-1, is designed as a sensitizer. The PXZ−R−BN-based sensitized OLEDs achieve a maximum external quantum efficiency (EQE_max) of nearly 30 % with an emission band at 693 nm, and exceptional long operational stability with an LT₉₇ (time to 97 % of the initial luminance) value of 39084 h at an initial radiance of 1000 mW sr⁻¹ m⁻². The BCz−R−BN-based OLEDs reach EQE_max values of 24.2 % with an emission band at 713 nm, which sets a record value for NIR OLEDs with emission bands beyond 700 nm.     

Alignment of Heptagonal Diimide and Triazine Enables Narrowband Pure-Blue Organic Light-Emitting Diodes with Low Efficiency Roll-Off

The endeavor to develop high-performance narrowband blue organic light-emitting diodes (OLEDs) with low efficiency roll-off represents an attractive challenge. Herein, we introduce a hetero-acceptor design strategy centered around the heptagonal diimide (BPI) building block to create an efficient thermally activated delayed fluorescence (TADF) sensitizer. The alignment of a twisted BPI unit and a planar diphenyltriazine (TRZ) fragment imparts remarkable exciton dynamic properties to 26tCz-TRZBPI, including a fast radiative decay rate (k_R) of 1.0×10⁷ s⁻¹ and a swift reverse intersystem crossing rate (k_RISC) of 1.8×10⁶ s⁻¹, complemented by a slow non-radiative decay rate (k_NR) of 6.0×10³ s⁻¹. Consequently, 26tCz-TRZBPI facilitates the fabrication of high-performance narrowband pure-blue TADF-sensitized fluorescence OLEDs (TSF-OLEDs) with a maximum external quantum efficiency (EQE_max) of 24.3 % and low efficiency roll-off even at a high brightness level of 10000 cd m⁻² (EQE₁₀₀₀₀: 16.8 %). This showcases a record-breaking external quantum efficiency at a high luminance level of 10000 cd m⁻² for narrowband blue TSF-OLEDs.     

Frontier Molecular Orbital Engineering: Constructing Highly Efficient Narrowband Organic Electroluminescent Materials

It is of great strategic significance to develop highly efficient narrowband organic electroluminescent materials that can be utilized to manufacture ultra-high-definition (UHD) displays and meet or approach the requirements of Broadcast Television 2020 (B.T.2020) color gamut standards. This motif poses challenges for molecular design and synthesis, especially for developing generality, diversity, scalability, and robustness of molecular structures. The emergence of multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters has ingeniously solved the problems and demonstrated bright application prospects in the field of UHD displays, sparking a research boom. This Minireview summarizes the research endeavors of narrowband organic electroluminescent materials, with emphasis on the tremendous contribution of frontier molecular orbital engineering (FMOE) strategy. It combines the outstanding advantages of MR framework and donor-acceptor (D−A) structure, and can achieve red-shift and narrowband emission simultaneously, which is of great significance in the development of long-wavelength narrowband emitters with emission maxima especially exceeding 500 nm. We hope that this Minireview would provide some inspiration for what could transpire in the future.     

Sulfone-Embedded Heterocyclic Narrowband Emitters with Strengthened Molecular Rigidity and Suppressed High-Frequency Vibronic Coupling

Sulfone-embedded heterocyclics are of great interest in organic light-emitting diodes (OLEDs), however, exploring highly efficient narrowband emitters based on sulfone-embedded heterocyclics remains challenging. Herein, five emitters with different sulfur valence state and molecular rigidity, namely tP, tCPD, 2tCPD, tPD and tPT, are thoroughly analysed. With restricted twisting of flexible peripheral phenyl by strengthening molecular rigidity, molecular emission spectra can be enormously narrowed. Further, introducing the sulfone group with bending vibration in low-frequency region that suppresses high-frequency vibration, sharp narrow full-widths at half-maximum of 28 and 25 nm are achieved for 2tCPD and tPD, respectively. Maximum external quantum efficiencies of 22.0 % and 27.1 % are successfully realized for 2tCPD- and tPD-based OLED devices. These results offer a novel design strategy for constructing narrowband emitters by introducing sulfone group into a rigid molecular framework.     

Intramolecular Cyclization: A Convenient Strategy to Realize Efficient BT.2020 Blue Multi-Resonance Emitter for Organic Light-Emitting Diodes

Rationally tuning the emission position and narrowing the full width at half-maximum (FWHM) of an emitter is of great importance for many applications. By synergistically improving rigidity, strengthening the resonant strength, inhibiting molecular bending and rocking, and destabilizing the HOMO energy level, a deep-blue emitter (CZ2CO) with a peak wavelength of 440 nm and an ultranarrow spectral FWHM of 16 nm (0.10 eV) was developed via intramolecular cyclization in a carbonyl/N resonant core (QAO). The dominant υ_0-0 transition character of CZ2CO gives a Commission Internationale de I’Éclairage coordinates (CIE) of (0.144, 0.042), nicely complying with the BT.2020 standard. Moreover, a hyper-fluorescent device based on CZ2CO shows a high maximum external quantum efficiency (EQE_max) of 25.6 % and maintains an EQE of 22.4 % at a practical brightness of 1000 cd m⁻².     

Mild Synthesis of Polychlorinated Arenes for Efficient Organic Light-emitting Diodes with Dual Thermally Activated Delayed Fluorescence

Polychlorinated (hetero)arenes have shown great promise for organic optoelectronics applications. However, the harsh synthetic routes for polychlorinated compounds and the possible luminescence quenching from the compact intermolecular π–π stacking induced by chlorine atoms limit their investigations and applications in luminescent materials. Herein, two isomeric polychlorinated polycyclic aromatic hydrocarbon (PAH) compounds JY-1-Cl and JY-2-Cl consisting of rigidified aryl ketones and amine are designed and synthesized under mild conditions through nucleophilic chlorination intermediated by an electron donor-acceptor complex. Among them, as a result of the strong π–π interactions induced by chlorine atoms, JY-2-Cl exhibits bright monomer and dimer emissions with dual thermally activated delayed fluorescence (TADF) characters. Notably, compared with the non-chlorinated compounds, a high photoluminescence quantum yield is maintained after introducing multiple chlorine atoms into JY-2-Cl . The first dual-TADF organic light-emitting diodes are also successfully fabricated with maximum external quantum efficiency as high as 29.1 % by employing JY-2-Cl as emitter. This work presents a new paradigm and synthesis of polychlorinated amine-carbonyl PAHs and demonstrates the great potential of the chlorinated materials for luminescent applications.     

A Simple Approach to Solution-Processible Small-Molecule Multi-Resonance TADF Emitters for High-Performance Narrowband OLEDs

Most multi-resonance (MR) induced thermally activated delayed fluorescence (TADF) emitters generally exhibit strong aggregation and relatively worse solubility due to their rigid and planar molecule structures, which is highly undesirable for solution-processible devices. Herein, a simple but feasible approach for solution-processible small-molecule MR-TADF emitters is developed by incorporating two MR-TADF units onto carbazole bridge bearing long alkyl chains. The obtained emitters demonstrate supreme film-forming capability and narrowband emissions with full-width at half-maximums (FWHMs) of 22 nm. The resulting solution-processed narrowband electroluminescent devices achieve maximum external quantum efficiency of 27.1 %, which represents the highest efficiency among the solution-processed OLEDs based on MR-TADF emitters. This simple approach reveals great potential of developing solution-processible emitters for rigid and planar molecular structures.     

Introducing Spiro-locks into the Nitrogen/Carbonyl System towards Efficient Narrowband Deep-blue Multi-resonance TADF Emitters

The current availability of multi-resonance thermally activated delayed fluorescence (MR-TADF) materials with excellent color purity and high device efficiency in the deep-blue region is appealing. To address this issue in the emerged nitrogen/carbonyl MR-TADF system, we propose a spiro-lock strategy. By incorporating spiro functionalization into a concise molecular skeleton, a series of emitters (SFQ, SOQ, SSQ, and SSeQ) can enhance molecular rigidity, blue-shift the emission peak, narrow the emission band, increase the photoluminescence quantum yield by over 92 %, and suppress intermolecular interactions in the film state. The referent CZQ without spiro structure has a more planar skeleton, and its bluer emission in the solution state redshifts over 40 nm with serious spectrum broadening and a low PLQY in the film state. As a result, SSQ achieves an external quantum efficiency of 25.5 % with a peak at 456 nm and a small full width at half maximum of 31 nm in a simple unsensitized device, significantly outperforming CZQ. This work discloses the importance of spiro-junction in modulating deep-blue MR-TADF emitters.     

A Deep-Blue-Emitting Heteroatom-Doped MR-TADF Nonacene for High-Performance Organic Light-Emitting Diodes**

We present a p- and n-doped nonacene compound, NOBNacene, that represents a rare example of a linearly extended ladder-type multiresonant thermally activated delayed fluorescence (MR-TADF) emitter. This compound shows efficient narrow deep blue emission, with a λ_PL of 410 nm, full width at half maximum, FWHM, of 38 nm, photoluminescence quantum yield, Φ_PL of 71 %, and a delayed lifetime, τ_d of 1.18 ms in 1.5 wt % TSPO1 thin film. The organic light-emitting diode (OLED) using this compound as the emitter shows a comparable electroluminescence spectrum peaked at 409 nm (FWHM=37 nm) and a maximum external quantum efficiency (EQE_max) of 8.5 % at Commission Internationale de l’Éclairage (CIE) coordinates of (0.173, 0.055). The EQE_max values were increased to 11.2 % at 3 wt % doping of the emitter within the emissive layer of the device. At this concentration, the electroluminescence spectrum broadened slightly, leading to CIE coordinates of (0.176, 0.068).     

A Quadruple-Borylated Multiple-Resonance Emitter with para/meta Heteroatomic Patterns for Narrowband Orange-Red Emission

Hindered by spectral broadening issues with redshifted emission, long-wavelength (e.g., maxima beyond 570 nm) multiple resonance (MR) emitters with full width at half maxima (FWHMs) below 20 nm remain absent. Herein, by strategically embedding diverse boron (B)/nitrogen (N) atomic pairs into a polycyclic aromatic hydrocarbon (PAH) skeleton, we propose a hybrid pattern for the construction of a long-wavelength narrowband MR emitter. The proof-of-concept emitter B4N6-Me realized orange-red emission with an extremely small FWHM of 19 nm (energy unit: 70 meV), representing the narrowest FWHM among all reported long-wavelength MR emitters. Theoretical calculations revealed that the cooperation of the applied para B-π-N and para B-π-B/N-π-N patterns is complementary, which gives rise to both narrowband and redshift characteristics. The corresponding organic light-emitting diode (OLED) employing B4N6-Me achieved state-of-the-art performance, e.g., a narrowband orange-red emission with an FWHM of 27 nm (energy unit: 99 meV), an excellent maximum external quantum efficiency (EQE) of 35.8 %, and ultralow efficiency roll-off (EQE of 28.4 % at 1000 cd m⁻²). This work provides new insights into the further molecular design and synthesis of long-wavelength MR emitters.     

Carbazole-Decorated Organoboron Emitters with Low-Lying HOMO Levels for Solution-Processed Narrowband Blue Hyperfluorescence OLED Devices

The hyperfluorescence has drawn great attention in achieving efficient narrowband emitting devices based on multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters. However, achieving efficient solution-processed pure blue hyperfluorescence devices is still a challenge, due to the unbalanced charge transport and serious exciton quenching caused by that the holes are easily trapped on the high-lying HOMO (the highest occupied molecular orbital) level of traditional diphenylamine-decorated emitters. Here, we developed two narrowband blue organoboron emitters with low-lying HOMO levels by decorating the MR-TADF core with weakly electron-donating carbazoles, which could suppress the hole trapping effect by reducing the hole traps between host and MR-TADF emitter from deep (0.40 eV) to shallow (0.14/0.20 eV) ones for facilitating hole transport and exciton formation, as well as avoiding exciton quenching. And the large dihedral angle between the carbazole and MR-TADF core makes the carbazole act as a steric hindrance to inhibit molecular aggregation. Accordingly, the optimized solution-processed pure blue hyperfluorescence devices simultaneously realize record external quantum efficiency of 29.2 %, narrowband emission with a full-width at half-maximum of 16.6 nm, and pure blue color with CIE coordinates of (0.139, 0.189), which is the best result for the solution-processed organic light-emitting diodes based on MR-TADF emitters.     

Integrating Asymmetric O−B−N Unit in Multi-Resonance Thermally Activated Delayed Fluorescence Emitters towards High-Performance Deep-Blue Organic Light-Emitting Diodes

Developing deep-blue thermally activated delayed fluorescence (TADF) emitters with both high efficiency and color purity remains a formidable challenge. Here, we proposed a design strategy by integrating asymmetric oxygen-boron-nitrogen (O−B−N) multi-resonance (MR) unit into traditional N−B−N MR molecules to form a rigid and extended O−B−N−B−N MR π-skeleton. Three deep-blue MR-TADF emitters of OBN , NBN and ODBN featuring asymmetric O−B−N, symmetric N−B−N and extended O−B−N−B−N MR units were synthesized through the regioselective one-shot electrophilic C−H borylation at different positions of the same precursor. The proof-of-concept emitter ODBN exhibited respectable deep-blue emission with Commission International de l′Eclairage coordinate of (0.16, 0.03), high photoluminescence quantum yield of 93 % and narrow full width at half maximum of 26 nm in toluene. Impressively, the simple trilayer OLED employing ODBN as emitter achieved a high external quantum efficiency up to 24.15 % accompanied by a deep blue emission with the corresponding CIE y coordinate below 0.1.     

A Simple Molecular Design Strategy for Pure-Red Multiple Resonance Emitters

Though the flourishment of materials with multiple resonance (MR) in blue to green regions, red-emissive MR emitters are still rare in literatures, which definitely should be resolved for further applications. Herein, we report a simple molecular design strategy for the construction of pure-red MR emitters by conjugate charge transfer, which could greatly enhance the π-conjugation degree and charge-transfer property of the target molecule while maintaining the basic feature of MR, leading to a significant redshift of more than 128 nm compared to the selected parent MR core. The proof-of-concept emitter PPZ-BN exhibited a pure-red emission with a dominant peak at 613 nm and a small full-width-at-half-maximum of 0.16 eV (48 nm). The optimized organic light-emitting diode showed a high external quantum efficiency of 26.9 %, a small efficiency roll-off, and an excellent operation stability (LT99) of more than 43 hours at an initial luminance of 10 000 cd m⁻².     

Triphenylamine-Derived Solid-State Emissive Carbon Dots for Multicolor High-Efficiency Electroluminescent Light-Emitting Diodes

Two kinds of triphenylamine-derived solid-state emissive carbon dots (CDs) with orange and yellow color are facilely synthesized through solvothermal treatment, taking advantage of the nonplanar structure and good carrier mobility of triphenylamine unit. Theoretical calculations show that the triphenylamine structure could greatly inhibit the direct π–π stacking of aromatic skeletons and enhance the fluorescence properties of CDs in aggregation state. By adopting the CDs as single emissive layer, high-performance orange-color and green-color electroluminescent light-emitting diodes (LEDs) are successfully fabricated, with maximum brightness of 9450/4236 cd m⁻², high current efficiency of 1.57/2.34 cd A⁻¹ and low turn-on voltage of 3.1/3.6 eV are respectively achieved. Significantly, white-color LED device is further prepared. This work provides a universal platform for the construction of novel solid-state emissive CDs with significant applications in photoelectric device.     

Regulating Perovskite Crystallization through Interfacial Engineering Using a Zwitterionic Additive Potassium Sulfamate for Efficient Pure-Blue Light-Emitting Diodes

Quasi-two-dimensional (quasi-2D) perovskites are emerging as efficient emitters in blue perovskite light-emitting diodes (PeLEDs), while the imbalanced crystallization of the halide-mixed system limits further improvements in device performance. The rapid crystallization caused by Cl doping produces massive defects at the interface, leading to aggravated non-radiative recombination. Meanwhile, unmanageable perovskite crystallization is prone to facilitate the formation of nonuniform low-dimensional phases, which results in energy loss during the exciton transfer process. Here, we propose a multifunctional interface engineering for nucleation and phase regulation by incorporating the zwitterionic additive potassium sulfamate into the hole transport layer. By using potassium ions (K⁺) as heterogeneous nucleation seeds, finely controlled growth of interfacial K⁺-guided grains is achieved. The sulfamate ions can simultaneously regulate the phase distribution and passivate defects through coordination interactions with undercoordinated lead atoms. Consequently, such synergistic effect constructs quasi-2D blue perovskite films with smooth energy landscape and reduced trap states, leading to pure-blue PeLEDs with a maximum external quantum efficiency (EQE) of 17.32 %, spectrally stable emission at 478 nm and the prolonged operational lifetime. This work provides a unique guide to comprehensively regulate the halide-mixed blue perovskite crystallization by manipulating the characteristics of grain-growth substrate.     

Polycyclic Aromatic Hydrocarbons as Potential Building Blocks for Organic Solar Cells

Since the discovery of graphene in the early 2000′s, polycyclic aromatic hydrocarbons (PAHs) have been resurrected and new synthetic tools have been developed to prepare unprecedented structures with unique properties. One application that has been overlooked for this class of molecules is organic solar cells (OSCs). In this account, we present the recent development in the preparation of moderate to low band gap PAHs that could potentially be used as semiconducting materials in OSCs. Our focus is directed toward all‐carbon PAHs as well as their polymeric analogs.     

Laser Desorption and Ionization of Solid Polycyclic Aromatic Hydrocarbons in Air With Analysis by Ion Mobility Spectrometry

Abstract

Solid polycyclic aromatic hydrocarbons with 4–7 rings on metal, glass, ceramic, and plastic substrates were desorbed and ionized in air with a quadrupled Nd-YAG laser. Gaseous product ions were analyzed at ambient conditions in air directly using ion mobility spectrometry. Ablation rates for perylene on borosilicate glass were estimated as 0.01 ng/mm2 per pulse and standard deviation for peak heights with roughly 1 ug/mm² was 34 %. Substrate interference was avoided by using an unfocused laser beam at 0.5–1 mJ/pulse although gaseous ions also could be generated from substrates with a focused beam at 1 mJ/pulse.     

Ozone Degradation of Polycyclic Aromatic Hydrocarbons Adsorbed on Asbestos

Abstract

The polycyclic aromatic hydrocarbons (PAH) represent a major source of pollution. The adsorption properties of chrysotile give us a good application as an asbestos filter and the regeneration can be made by ozonolysis for a complete destruction to non toxic compounds.     

Functionalization of Pentacene: A Facile and Versatile Approach to Contorted Polycyclic Aromatic Hydrocarbons

In this work, a facile and versatile strategy for the synthesis of contorted polycyclic aromatic hydrocarbons (PAHs) starting from the functionalized pentacene was established. A series of novel PAHs 1 – 4 and their derivatives were synthesized through a simple two-step synthesis procedure involving an intramolecular reductive Friedel–Crafts cyclization of four newly synthesized pentacene aldehydes 5 – 8 as a key step. All the molecules were confirmed by single-crystal X-ray diffraction and their photophysical and electrochemical properties were studied in detail. Interestingly, the most striking feature of 1 – 4 is their highly contorted carbon structures and the accompanying helical chirality. In particular, the optical resolution of 2 was successfully achieved by chiral-phase HPLC, and the enantiomers were characterized by circular dichroism and circularly polarized luminescence spectroscopy. Despite the highly nonplanar conformations, these contorted PAHs exhibited emissive properties with moderate-to-good fluorescence quantum yields, implying the potential utility of this series PAHs as high-quality organic laser dyes. By using a self-assembly method with the help of epoxy resin, a bottle microlaser based on 3 a was successfully illustrated with a lasing wavelength of 567.8 nm at a threshold of 0.3 mJ/cm². We believe that this work will shed light on the chemical versatility of pentacene and its derivatives in the construction of novel functionalized PAHs.