Revisiting the Structure of Calcined and Hydrated AlPO-11 with DFT-Based Molecular Dynamics Simulations**

Published crystal structures of the AEL-type aluminophosphate AlPO-11 in its calcined form (space group ) show some peculiar features, such as unusually short Al−O and P−O bonds and near-linear Al−O−P angles. Although experimental evidence for the presence of dynamic disorder was presented, the nature of the associated distortions remained unresolved. In this study, ab initio molecular dynamics (AIMD) calculations in the framework of density functional theory (DFT) were employed to study the dynamic behaviour of this zeotype. At 100 K, static local distortions that break the symmetry are present in the time-averaged structures computed from the AIMD trajectories. At 300 and 500 K, the time-averaged structures approach symmetry. Although shortened Al−O and P−O bonds and near-linear Al−O−P angles were found in the average structures, an analysis of radial and angular distribution functions confirmed their absence in the instantaneous structures. This deviation is due to a precession-like motion of some oxygen atoms around the Al−P connection line, which moves their time-averaged positions closer to this line. In hydrated AlPO-11, some of the water molecules are coordinated to framework Al atoms, leading to an octahedral coordination of 1/5 of the Al sites. DFT optimisations and AIMD simulations on partially hydrated models delivered evidence for a preferential adsorption at the Al1 site. No dynamic disorder was observed for the hydrated form.     

Quantitative Assessment of B−B−B,B−Hb−B,and B−Ht Bonds: From BH3 to B12H122−

We report the thermodynamic stabilities and the intrinsic strengths of three-center-two-electron B−B−B and B−H_b−B bonds ( : bridging hydrogen), and two-center-two-electron B−H_t bonds ( : terminal hydrogen) which can be served as a new, effective tool to determine the decisive role of the intermediates of hydrogenation/dehydrogenation reactions of borohydride. The calculated heats of formation were obtained with the G4 composite method and the intrinsic strengths of B−B−B, B−H_b−B, and B−H_t bonds were derived from local stretching force constants obtained at the B3LYP-D2/cc-pVTZ level of theory for 21 boron-hydrogen compounds, including 19 intermediates. The Quantum Theory of Atoms in Molecules (QTAIM) was used to deepen the inside into the nature of B−B−B, B−H_b−B, and B−H_t bonds. We found that all of the experimentally identified intermediates hindering the reversibility of the decomposition reactions are thermodynamically stable and possess strong B−B−B, B−H_b−B, and B−H_t bonds. This proves that thermodynamic data and intrinsic B−B−B, B−H_b−B, and B−H_t bond strengths form a new, effective tool to characterize new (potential) intermediates and to predict their role for the reversibility of the hydrogenation/dehydrogenation reactions.     

Reversible Metal-Hydride Transformation in Mg-Ti-H Nanoparticles at Remarkably Low Temperatures

We study the kinetics of hydrogen sorption in Mg-Ti-H nanoparticles prepared by gas phase condensation of mixed Mg-Ti vapors under a H₂-containing atmosphere. Four samples with different Ti contents from 14 to 63 at.% Ti are examined in the 100–150 °C range. The hydrogen absorption kinetics coupled with the formation of MgH₂ can be described by a nucleation and growth model. The activation energy is in the range kJ/mol and the rate constant (at 150 °C) increases from s⁻¹ to s⁻¹ with increasing Ti content. Hydrogen desorption is well modeled by a sequence of surface-limited and contracting-volume kinetics, except at the highest Ti content where nucleation and growth is observed. The activation energy of surface-limited kinetics is /mol. The rate constant (at 150 °C) increases from s⁻¹ to s⁻¹ with the Ti content. These results open an unexplored kinetic window for Mg-based reversible hydrogen storage close to ambient temperature.     

Fluorine Substitution of TCNQ Alters the Redox-Driven Catalytic Pathway for the Ferricyanide-Thiosulfate Reaction

Mechanistic variation in catalysis through substituent-based redox tuning is well established. Fluorination of TCNQ (TCNQ=tetracyanoquinodimethane) provides ~850 mV variation in the redox potentials of the and (n=0, 2, 4) processes. With , catalysis of the kinetically very slow ferrocyanide-thiosulfate redox reaction in aqueous solution occurs via a mechanism in which the catalyst is reduced to when reacting with which is oxidised to . Subsequently, reacts with to form and reform the catalyst, in another thermodynamically favoured process. An analogous mechanism applies with as a catalyst. In contrast, since the reaction of with is thermodynamically unfavourable, an alternative mechanism is required to explain the catalytic activity observed in this non-fluorinated system. Here, upon addition of , reduction of to occurs with concomitant oxidation of to , which then acts as the catalyst for oxidation. Thermodynamic data explain the observed differences in the catalytic mechanisms. (n=0, 4) also act as catalysts for the ferricyanide-thiosulfate reaction in aqueous solution. The present study shows that homogeneous pathways are available following addition of these dissolved materials. Previously, these (n=0, 4) coordination polymers have been regarded as insoluble in water and proposed as heterogeneous catalysts for the ferricyanide-thiosulfate reaction. Details and mechanistic differences were established using UV-visible spectrophotometry and cyclic voltammetry.     

Potential of AMnO3 (A=Ca,Sr, Ba,La) as Active Layer in Inorganic Perovskite Solar Cells

Inorganic perovskite CaMnO was proposed as a substitution for the TiO anatase in electron transport layers of solar cells containing the hybrid perovskite CH NH PbI based on increased mobility of electrons and better optical matching. Due to a suitable band gap concerning the absorption of sunlight, we investigate the potential of CaMnO and similar manganite perovskites, where Ca is replaced by either Sr, Ba or La, as an absorber layer in inorganic perovskite solar cells. In this study, we have used optical measurements on the synthesized AMnO (A=Ca, Sr, Ba, La) samples to aid density functional theory calculations (DFT) in order to accurately simulate the electronic and optical properties of AMnO compounds and gauge their potential for the role of absorber layer. Both experimental measurements and theoretical calculations show suitable band gap of 1.1-1.5 eV, depending on the compound, and absorption coefficients of the order of cm in the visible part of the spectrum.     

Adsorption of Acetate on Au(111): An in-situ Scanning Tunnelling Microscopy Study and Implications on Formic Acid Electrooxidation

The adsorption of acetate on an Au(111) electrode surface in contact with acetic acid at pH 2.7 was imaged in-situ using scanning tunnelling microscopy (STM). Two different ordered structures were imaged for acetate adsorbed in the bidentate configuration on the unreconstructed surface at 0.95 V (vs. the saturated calomel electrode, SCE). The first structure, , is metastable and transforms at constant potential within 20 minutes to a structure, which is thermodynamically more favourable. The acetate adlayer starts to form at step edges and propagates via nucleation and growth onto terraces. The findings from in-situ STM are in agreement with the electrochemical behaviour of acetate on Au(111) characterized by voltammetry. A comparison is made with formate adsorption on Au(111). While acetate is not reactive, in contrast to formate, it can act as a spectator species in formic acid electrooxidation.     

Indirect Nuclear Spin-Spin Exchange Coupling through Solvated Electron in Small Sizes of Cyclic and Cage-Shaped Perfluoroalkanes

Small perfluorocycloalkanes (hexafluorocyclopropane (c-C₃F₆), octafluorocyclobutane (c-C₄F₈) and decafluorocyclopentane (c-C₅F₁₀) and cage-shaped perfluoroalkanes (perfluoro tetrahedral alkane (C₄F₄), perfluoro prismane (C₆F₆) and perfluoro cubane (C₈F₈)) are better electron scavengers. The captured excess electrons are weakly bound inside their backbone voids or over their backbones, forming the solvated electron ( ) systems (e@c-C_nF_2ns (n=3, 4, 5) and e@C_nF_n (n=4, 6, 8)). There have been many studies on the structures and properties of such systems. However, the effect of on the indirect nuclear spin-spin coupling (J-coupling) is unknown. In this work, we explore how affects ^NeJ-coupling between two coupled F nuclei (^NeJ_FF-coupling) in perfluoroalkane systems through density functional theory calculations. We find unusual trans-^NeJ_FF-couplings (two coupled F nuclei in trans-position) in e@c-C_nF_2n (n=3, 4, 5) and ^NeJ_FF-couplings in e@C_nF_n (n=4, 6, 8). One excess electron not only changes the molecular structures, but also enforces unique distributions and properties, depending on the structural characteristics. We also confirm that such unusual ^NeJ_FF-couplings are realized by through- (T-SE) transmission mechanism, rather than the conventional through-bonds (T−B)/through-space (T−S) ones. The novel transmission mechanism consists of the T-SE coupling path (path 1) and -enhanced T−B T−S coupling path (path 2), and the two paths jointly control ^NeJ_FF through cooperation and competition. Interestingly, the former plays a dominant role for long-range ^NeJ_FF-coupling (N=5), while the latter plays a role in the short-range ^NeJ_FF-coupling (N=3, 4). Path bending angle mainly influences path 1, while path 2 is mainly influenced by the path length. This work not only provides novel insights into the mediating role of in the coupling information exchange, but also proposes a new -based coupling mechanism, possibly opening up potential applications for the -based indirect nuclear spin couplings.     

Photoionization Bands of Cyanogen: Multi-Mode Vibronic Coupling and Renner-Teller Effects

Multi-mode vibronic coupling in the , , and electronic states of Cyanogen radical cation (C N ) is investigated with the aid of ab initio quantum chemistry and first principles quantum dynamics methods. The electronic degenerate states of Π symmetry of C N undergo Renner-Teller (RT) splitting along degenerate vibrational modes of π symmetry. The RT split components form symmetry allowed conical intersections with those from nearby RT split states or with non-degenerate electronic states of Σ symmetry. A parameterized vibronic Hamiltonian is constructed using standard vibronic coupling theory in a diabatic electronic basis and symmetry rules. The parameters of the Hamiltonian are derived from ab initio calculated adiabatic electronic energies. The vibronic spectrum is calculated, assigned and compared with the available experimental data. The impact of various electronic coupling on the vibronic structure of the spectrum is discussed.     

Electroreduction of Aryldiazonium Ion at the Polar and Non-Polar Faces of ZnO: Characterisation of the Grafted Films and Their Influence on Near-Surface Band Bending

ZnO is a strong candidate for transparent electronic devices due to its wide band gap and earth-abundance, yet its practical use is limited by its surface metallicity arising from a surface electron accumulation layer (SEAL). The SEAL forms by hydroxylation of the surface under normal atmospheric conditions, and is present at all crystal faces of ZnO, although with differing hydroxyl structures. Multilayer aryl films grafted from aryldiazonium salts have previously been shown to decrease the downward bending at O-polar ZnO thin films, with Zn−O−C bonds anchoring the aryl films to the substrate. Herein we show that the Zn-polar (0001), O-polar (000 ), and non-polar m-plane (10 0) faces of ZnO single crystals, can also be successfully electrografted with nitrophenyl (NP) films. In all cases, X-ray photoelectron spectroscopy (XPS) measurements reveal that the downward surface band bending decreases after modification. XPS provides strong evidence for Zn−O−C bonding at each face. Electrochemical reduction of NP films on O-polar ZnO single crystals converts the film to a mainly aminophenyl layer, although with negligible further change in band bending. This contrasts with the large upward shifts in band bending caused by X-ray induced reduction.     

Electronic Structure of the Low-Lying States of the Triatomic MoS2 Molecule: The Building Block of 2D MoS2

Molybdenum disulfide (MoS₂) is the building component of 1D-monolayer, 2D-layered nanosheets and nanotubes having many applications in industry, and it is detected in various molecular systems observed in nature. Here, the electronic structure and the chemical bonding of sixteen low-lying states of the triatomic MoS₂ molecule are investigated, while the connection of the chemical bonding of the isolated MoS₂ molecule to the relevant 2D-MoS₂, is emphasized. The MoS₂ molecule is studied via DFT and multireference methodologies, i. e., MRCISD(+Q)/aug-cc-pVQZ(−PP)_Mo. The ground state, ³B₁, is bent (Mo−S=2.133 Å and ϕ(SMoS)=115.9°) with a dissociation energy to atomic products of 194.7 kcal/mol at MRCISD+Q. In the ground and in the first excited state a double bond is formed between Mo and each S atom, i. e., . These two states differ in which d electrons of Mo are unpaired. The Mo−S bond distances of the calculated states range from 2.108 to 2.505 Å, the SMoS angles range from 104.1 to 180.0°, and the Mo−S bonds are single or double. Potential energy curves and surfaces have been plotted for the ³B₁, ⁵A₁ and ⁵B₁ states. Finally, the low-lying septet states of the triatomic molecule are involved in the material as a building block, explaining the variety of its morphologies.     

The Reaction of Sulfur Dioxide Radical Cation with Hydrogen and its Relevance in Solar Geoengineering Models

SO₂ has been proposed in solar geoengineering as a precursor of H₂SO₄ aerosol, a cooling agent active in the stratosphere to contrast climate change. Atmospheric ionization sources can ionize SO₂ into excited states of , which quickly reacts with trace gases in the stratosphere. In this work we explore the reaction of with excited by tunable synchrotron radiation, leading to ( ), where H contributes to O₃ depletion and OH formation. Density Functional Theory and Variational Transition State Theory have been used to investigate the dynamics of the title barrierless and exothermic reaction. The present results suggest that solar geoengineering models should test the reactivity of with major trace gases in the stratosphere, such as H₂ since this is a relevant channel for the OH formation during the nighttime when there is not OH production by sunlight. OH oxides SO₂, triggering the chemical reactions leading to H₂SO₄ aerosol.     

Double-Exchange Magnetic Interactions in High-Temperature Ferromagnetic Iron Chalcogenide Monolayers

Smythite ( ) is an iron-based chalcogenide with a lamellar structure, different from the compositionally identical mineral greigite. Owing to their natural abundance, such transition metal chalcogenides are promising materials for low-cost spintronic-based devices. Herein, we discuss the charge transfer processes and complex magnetic ordering in a two-dimensional (2D) smythite lattice. We find that redox couple and complex magnetic ordering are governing factors in the charge transfer processes. A very strong ferromagnetic in-lattice coupling is also observed, which is attributed to the presence of three Fe-centres. To describe the magnetic behaviour molecular and periodic approaches have been considered. We found a substantial increase in Curie temperature with applied mechanical stress due to opening of the double exchange interaction angle. We also observe an in-plane Jahn−Teller distortion, which is further confirmed by the spin−orbit counter plot. Our study thus provides an insight into the double exchange mechanism favoured by the redox couple and results in a strong ferromagnetic ordering.     

g-B3C2N3: A Potential Two Dimensional Metal-free Photocatalyst for Overall Water Splitting**

Based on hybrid density functional theory (DFT) calculations, we propose a new two-dimensional (2D) B-C-N material, graphitic- (g- ), with the promising prospect of metal-free photocatalysis. We find it to be a near ultraviolet (UV) absorbing direct band gap (3.69 eV) semiconductor with robust dynamical and mechanical stability. Estimating the band positions with respect to water oxidation and hydrogen reduction potential levels along with a detailed analysis of reaction mechanism of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), we observe that g- monolayer can be efficiently used for hydrogen fuel generation over entire pH range as well as for spontaneous water splitting at basic pH range. Upon biaxial strain application, band positions get realigned along with the free energy change that is involved in HER and OER. Consequently, operational range of pH for OER gets broadened and the proposed material exhibits the ability to perform spontaneous and simultaneous oxidation and reduction even in neutral pH. The combination of pH variation and applied strain can be used as a key to control the reducing and/or oxidizing abilities precisely for diverse photocatalytic reactions to attain environmental sustainability.     

Development and Verification of a Diagnostic Technology for Waste Battery Deterioration Factors

We defined four major deterioration factors (electrolyte loss (EL), lithium loss (LL), lithium precipitation (LP), and compound deterioration (CD)). Then, we derived eleven key performance indicators (KPIs) for comparative analysis. After that, we fabricated three deteriorated cells for each of three deterioration factors (EL, LL, and LP) and one cell with CD (for verification) with four individual (dis)charging experiment manuals. The two major contributions of this study are the performance of 1) trend analysis to determine a suitable diagnostic metric by inspecting the eleven KPIs and 2) comparison analysis of and to verify the effectiveness of utilizing as a real-time deterioration diagnostic factor using a concept of model-in-the-loop simulation. The results show that 1) has the most conspicuous trendline tendency among the eleven comparison targets for all four major deterioration factors, and 2) the angle difference between the two trends of and lies within a minimum of 9° and a maximum of 43° (with a sscale on the x-axis and a scale on the y-axis for a clear trend line analysis). From this, we can conclude that the trendline-based real-time deterioration analysis employing may be practically applicable to a limited extent.     

Second Harmonic Generation Signatures of Supramolecular Assemblies Based on Amide Moieties

Targeting the use of the second harmonic generation (SHG) as a bioimaging technique to unravel the formation of aggregates, the SHG first hyperpolarizabilities ( ) of assemblies of benzene-1,3,5-tricarboxamide derivatives have been evaluated at the density functional theory level. Calculations have revealed that i) the assemblies exhibit SHG responses and the total first hyperpolarizability responses of the aggregates are evolving with their size. The largest aggregation effect is a 18-times increase for of B4 when going from the monomer to the pentamer, that ii) the intrinsic SHG responses described by the hyper-Rayleigh Scattering are enhanced in presence of iodine atoms on the phenyl core, that iii) the side chains affect the relative orientation of the dipole moment and first hyperpolarizability vectors, which impacts more the EFISHG quantities than their moduli, and that iv) the radial component to is dominant for the compounds having the largest responses. These results have been obtained using the sequential molecular dynamics then quantum mechanics approach to account for dynamic structural effects on the SHG responses.     

Size Evolution of Photoabsorption Spectra of Small Clusters: A Computational Study

Photoabsorption spectra of clusters, N=5–9, have been calculated using a diatomics-in-molecules like electronic structure model and a path-integral Monte Carlo sampling method. A qualitative change in the calculated spectra has been observed at N=9, which has been interpreted in terms of a structural transformation in the clusters consisting in a transition from trimer-like ionic cores observed for N≤7 to dimer-like ionic cores prevailing in through an intermediate state (comparable abundances of both types of ionic cores) observed in . The calculated spectra have been thoroughly compared with an earlier calculation on , , and reported from our group and data available for the same cluster sizes from an experiment.     

Probing the Effects of the Number and Positions of −OCH3 and −CN Substituents on Color Tuning of Ir(III) Complex Derivatives through a Joint Computational and Experimental Study

We performed a joint theoretical and experimental study on sixteen Ir(III) complexes bearing a similar molecular platform of bis(2-phenylbenzothiozolato-N,C^2’) iridium(III) (acetylacetonate) by grafting −OCH₃ group and/or −CN group on different positions of the C-related arene moiety of the ligand (C-ring). Our results reveal that the introduction of −CN renders an overall drop in the FMO energy levels while a reverse increase is observed for −OCH₃. The ortho- and para-sites of the C-ring are more effective substitution positions to modulate the HOMO energy level due to the fact that the electronic density of HOMO mainly locates at them while the meta-site would induce a stronger impact on LUMO since the electronic density of LUMO mainly distributes over the position. Utilizing the synergistic effects of the substituents and the substituted positions, a wide color-tuning range from 479 nm to 637 nm was achieved, which covers nearly the whole window of visible spectrum. In particular, the tri-substituted Ir35mo4cn complex (λ_{em max}=637 nm) may be a potential candidate for high efficiency red OLEDs materials due to its greatly enhanced absorption processes, relatively higher ³MLCT (%), lower ΔE_S1–T1, enlarged separation between ³MLCT/π–π* and ³MC d–d states, and good hole and particle-transporting performances. Finally, six representative complexes were synthesized and their spectra were determined, which confirm the reliability of our computational strategy.     

The Threshold Photoelectron Spectrum of Fulvenone: A Reactive Ketene Derivative in Lignin Valorization

Unveiling reaction mechanisms by isomer-selective detection of reactive intermediates requires advanced spectroscopic knowledge. We study the photoionization of fulvenone (c-C₅H₄=C=O), a reactive ketene species relevant in catalytic pyrolysis of lignin, which was generated by pyrolysis of 2-methoxy acetophenone. The high-resolution threshold photoelectron spectrum (TPES) with vacuum ultraviolet synchrotron radiation revealed well-resolved vibrational transitions, assigned to ring deformation modes of the cyclopentadiene moiety. The adiabatic ionization energy was determined to be 8.25±0.01 eV and is assigned to the ²A₂← ¹A₁ transition. A broad and featureless band arising at 9 eV is associated with the ²B₁← ¹A₁ excitation. A conical intersection is responsible for the ultrafast relaxation of the fulvenone cation from the into the state resulting in a featureless and lifetime broadened band. These insights will increase the detection capabilities for fulvenone and thereby help to elucidate reaction mechanisms in lignin catalytic pyrolysis.     

Catalytic Reaction Mechanism of Bacterial GH92 α-1,2-Mannosidase: A QM/MM Metadynamics Study

The catalytic mechanism of a -dependent family 92 -mannosidase, which is abundantly present in human gut flora and malfunctions leading to the lysosomal storage disease α-mannosidosis, has been investigated using quantum mechanics/molecular mechanics and metadynamics methods. Computational efforts show that the enzyme follows a conformational itinerary of and the ion serves a dual purpose, as it not only distorts the sugar ring but also plays a crucial role in orchestrating the arrangement of catalytic residues. This orchestration, in turn, contributes to the facilitation of conformers for the ensuing reaction. This mechanistic insight is well-aligned with the experimental predictions of the catalytic pathway, and the computed energies are of the same order of magnitude as the experimental estimations. Hence, our results extend the mechanistic understanding of glycosidases.