Chalcogen-Expanded Unsaturated Silicon Clusters: Thia-, Selena-, and Tellurasiliconoids

Reactions of silylenes with heavier chalcogens (E) typically result in Si=E double bonds or their π-addition products. In contrast, the oxidation of a silylene-functionalized unsaturated silicon cluster (siliconoid) with Group 16 elements selectively yields cluster expanded siliconoids Si₇E (E=S, Se, Te) fully preserving the unsaturated nature of the cluster scaffold as evident from the NMR signatures of the products. Mechanistic considerations by DFT calculations suggest the intermediacy of a Si₆ siliconoid with exohedral Si=E functionality. The reaction thus may serve as model system for the oxidation of surface-bonded silylenes at Si(100) by chalcogens and their diffusion into the silicon bulk.     

平面五配位硅、 锗XBe5H6(X=Si,Ge)团簇

采用密度泛函理论PBE0方法, 在aug-cc-pVTZ水平上理论预测了含平面五配位硅和锗原子的XBe₅H₆ (X=Si, Ge)团簇. 势能面系统搜索及高精度量化计算表明, 它们均为全局极小结构. XBe₅H₆(X=Si, Ge)团簇整体呈完美的扇形结构: Si/Ge原子被5个金属Be原子配位; 4个H原子以桥基方式与Be原子相键连, 剩余的2个 H原子以端基方式与两端的Be原子成键. 化学键分析表明, XBe₅H₆(X=Si, Ge) 团簇中XBe₅单元具有完全离域的1个π及3个σ键, 外围铍氢间形成4个Be—H—Be 三中心二电子(3c-2e)键及2个定域的Be—H键. XBe₅单元上离域的2π及6σ电子赋予体系π和σ双重芳香性, 并使Si/Ge原子满足八隅律（或八电子规则）. 能量分解-化学价自然轨道分析揭示, Si/Ge和Be₅H₆之间主要为电子共享键.     

Global minimum geometries of acetylene clusters (HCCH)n with n ≤ 55 obtained by a heuristic method combined with geometrical perturbations

Geometry optimization of acetylene clusters (HCCH)_n in the range of n ≤ 55 was carried out with a recently proposed intermolecular potential consisting of Morse potentials, damped dispersion terms, and damped Coulomb terms. The heuristic method developed by the present author was used in the optimization: optimal geometries were searched by using geometry perturbations and subsequent local optimizations. The calculations were repeated until the global minimum was found for each cluster at least three times. The obtained results were analyzed to examine structural evolution of the clusters. The geometries of the clusters with n ≥ 25 were similar to the geometry in the cubic crystal of acetylene whereas smaller clusters take icosahedron‐based geometries. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Mechanism of Separate Interaction of Oxygen and Methane with the Perovskite Catalyst SrCoO3−x Modified by Alkali Metals

We have studied the initial steps of activation of O₂ and CH₄ on strontium cobaltite, with the perovskite structure and modified by alkali metals, under nonsteady-state conditions using a TAP reactor (TAP = Temporal Analysis of Products). We have established that adsorption of oxygen can be described by a three-step mechanism including intermediate formation of molecularly adsorbed oxygen followed by its dissociation and insertion of atomically adsorbed oxygen into the interior of the catalyst. The kinetics of reaction of methane with the oxidized catalyst is described satisfactorily by a first-order equation.     

Novel,Mild, and Highly Efficient Method for the Synthesis of 2-Arylbenzothiazoles by the Oxidation of 2-Arylbenzothiazolines with Silicon Lewis Acids

Oxidation of structurally diverse 2-arylbenzothiazolines to give the corresponding 2-arylbenzothiazoles has been carried out in benzene using dimethyldichlorosilane and trimethylchlorosilane. Short reaction times, mild reaction conditions, easy and quick isolation of the products, and excellent yields are the main advantages of this procedure.     

Elucidation of the structures of 3-alkylthio-, 3-benzylthio-, 2-arylthio- and 2-heteroarylthio-N1-(1,3-dimethylbutyl)-N4-phenyl-1,4-phenylenediamines by one- and two-dimensional NMR spectroscopy

Nucleophilic addition of alkyl- and benzylthiols to benzoquinone diimine (1) gave the corresponding 3-alkylthio- or 3-benzylthio-1,4-phenylenediamines (2-5). However, addition of aryl- or heteroarylthiols to 1 formed 2-arylthio- or 2-heteroarylthio-1,4-phenylenediamines (6-14). The structures of 2-14, obtained in 55-91% yields, were confirmed in CDCl3 or DMSO-d6 solution using 1D (NOE difference, coupled 13C NMR spectra, APT and DEPT) and 2D NMR techniques [DQCOSY, NOESY, HETCOR and heteronuclear multiple bond coherence (HMBC)] that resulted in unambiguous proton and carbon NMR resonance assignments. The substituent-induced 13C NMR chemical shift differences were calculated in 2-14 relative to carbon atoms in the model compound N1-(1,3-dimethylbutyl)-N4-phenyl-1,4-phenylenediamine (DMBPPD) (15) (a reduced form of benzoquinone diimine).     

Theoretical studies on four-membered ring compounds with NF2, ONO2, N3, and NO2 groups

Density functional theory (DFT) method has been employed to study the geometric and electronic structures of a series of four-membered ring compounds at the B3LYP/6-311G** and the B3P86/6-311G** levels. In the isodesmic reactions designed for the computation of heats of formation (HOFs), 3,3-dimethyl-oxetane, azetidine, and cyclobutane were chosen as reference compounds. The HOFs for N(3) substituted derivations are larger than those of oxetane compounds with --ONO2 and/or --NF2 substituent groups. The HOFs for oxetane with --ONO2 and/or --NF2 substituent groups are negative, while the HOFs for N3 substituted derivations are positive. For azetidine compounds, the substituent groups within the azetidine ring affect the HOFs, which increase as the difluoroamino group being replaced by the nitro group. The magnitudes of intramolecular group interactions were predicted through the disproportionation energies. The strain energy (SE) for the title compounds has been calculated using homodesmotic reactions. For azetidine compounds, the NF2 group connecting N atom in the ring decrease the SE of title compounds. Thermal stability were evaluated via bond dissociation energies (BDE) at the UB3LYP/6-311G** level. For the oxetane compounds, the O--NO2 bond is easier to break than that of the ring C--C bond. For the azetidine and cyclobutane compounds, the homolyses of C--NX2 and/or N--NX2 (X = O, F) bonds are primary step for bond dissociation. Detonation properties of the title compounds were evaluated by using the Kamlet-Jacobs equation based on the calculated densities and HOFs. It is found that 1,1-dinitro-3,3-bis(difluoroamino)-cyclobutane, with predicted density of ca. 1.9 g/cm(3), detonation velocity (D) over 9 km/s, and detonation pressure (P) of 41 GPa that are lager than those of TNAZ, is expected to be a novel candidate of high energy density materials (HEDMs). The detonation data of nitro-BDFAA and TNCB are also close to the requirements for HEDMs.     

测定钛铁矿中TFe、TiO2、SiO2、Al2O3、CaO、MgO的含量

以粉末压片法制样,采用X射线荧光光谱(XRF)法测定钛铁矿中TFe、TiO2、SiO2、Al2O3、CaO、MgO的含量。对样品的矿物效应、样品粒度、分析谱线等条件进行优化。利用不同产地的质控样品制作工作曲线,验证矿物效应影响不大;通过样品粒度小于74 μm,很好地解决了颗粒粒度效应的影响。 精密度实验表明,待测组分的相对标准偏差均低于3.6%(RSD,n=10),能满足钛铁矿中各组分的测定要求。