Manipulating Coulombic Efficiency of Cathodes in Aqueous Zinc Batteries by Anion Chemistry

Electrolyte environments, including cations, anions, and solvents are critical for the performance delivery of cathodes of batteries. Most works focused on interactions between cations and cathode materials, in contrast, there is a lack of in-depth research on the correlation between anions and cathodes. Here, we systematically investigated how anions manipulate the coulombic efficiency (CE) of cathodes of zinc batteries. We take intercalation-type V₂O₅ and conversion-type I₂ cathodes as typical cases for profound studies. It was found that electronic properties of anions, including charge density and its distribution, can tune conversion or intercalation reactions, leading to significant CE differences. Using operando visual Raman microscopy and theoretical simulations, we confirm that competitive coordination between anions and I⁻ can regulate CEs by modulating polyiodide diffusion rates in Zn−I₂ cells. In Zn−V₂O₅ cells, anion-tuned solvation structures vastly affect CEs through varying Zn²⁺ intercalation kinetics. Conversion I₂ cathode achieves a 99 % CE with highly electron-donating anions, while anions with preferable charge structures that interact strongly with Zn²⁺ afford an intercalation V₂O₅ a nearly 100 % CE. Understanding the mechanism of anion-governed CEs will help us evaluate compatibility of electrolytes with electrodes, thus providing a guideline for anion selection and electrolyte design for high-energy, long-cycling zinc batteries.     

Six-Electron-Redox Iodine Electrodes for High-Energy Aqueous Batteries

Iodine (I₂) shows great promising as the active material in aqueous batteries due to its distinctive merits of high abundance in ocean and low cost. However, in conventional aqueous I₂-based batteries, the energy storage mechanism of I⁻/I₂ conversion is only two-electron redox reaction, limiting their energy density. Herein, six-electron redox chemistry of I₂ electrodes is achieved via the synergistic effect of redox-ion charge-carriers and halide ions in electrolytes. The redox-active Cu²⁺ ions in electrolytes induce the conversion between Cu²⁺ ions and I₂ to CuI at low potential. Simultaneously, the Cl⁻ ions in electrolytes activate the I₂/ICl redox couple at high potential. As a result, in our case, I₂-based battery system with six-electron redox is developed. Such energy storage mechanism with six-electron redox leads to high discharge potential and capacity, excellent rate capability, as well as stable cycling behavior of I₂ electrodes. Impressively, six-electron-redox I₂ cathodes can match various aqueous metal (e.g. Zn, Mn and Fe) anodes to construct metal||I₂ hybrid batteries. These hybrid batteries not only deliver enhanced capacities, but also exhibit higher operate voltages, which contributes to superior energy densities. Therefore, this work broadens the horizon for the design of high-energy aqueous I₂-based batteries.     

A Semi-solid Zinc Powder-based Slurry Anode for Advanced Aqueous Zinc-ion Batteries

The booming of aqueous zinc-ion batteries (AZIBs) draws the researchers’ attention to issues of zinc metal anodes, such as uncontrollable dendrite growth, corrosion, and volume effects. Zinc powder anode is more suitable for the industrial application of AZIBs than the widely used zinc foil anode due to its low cost, tunability and processability. However, the related solutions are rarely studied because the above issues of zinc metal anode are more serious in zinc powder anode. Herein, for the first time, we design a semi-solid zinc slurry anode consisting of zinc powder and zincophilic tin additive dispersed in a conductive elastic rheological network. Zinc can be deposited homogeneously on the dispersed tin particles, which avoids agglomerative zinc deposition and alleviates volume change during repeated zinc stripping/plating. Moreover, the practical application of the full cell with slurry is very promising since its operating life can be easily extended by facile slurry renewal.     

Solvation Modulation Enhances Anion-Derived Solid Electrolyte Interphase for Deep Cycling of Aqueous Zinc Metal Batteries

Stable Zn anodes with a high utilization efficiency pose a challenge due to notorious dendrite growth and severe side reactions. Therefore, electrolyte additives are developed to address these issues. However, the additives are always consumed by the electrochemical reactions over cycling, affecting the cycling stability. Here, hexamethylphosphoric triamide (HMPA) is reported as an electrolyte additive for achieving stable cycling of Zn anodes. HMPA reshapes the solvation structures and promotes anion decomposition, leading to the in situ formation of inorganic-rich solid-electrolyte-interphase. More interestingly, this anion decomposition does not involve HMPA, preserving its long-term impact on the electrolyte. Thus, the symmetric cells with HMPA in the electrolyte survive ≈500 h at 10 mA cm⁻² for 10 mAh cm⁻² or ≈200 h at 40 mA cm⁻² for 10 mAh cm⁻² with a Zn utilization rate of 85.6 %. The full cells of Zn||V₂O₅ exhibit a record-high cumulative capacity even under a lean electrolyte condition (E/C ratio=12 μL mAh⁻¹), a limited Zn supply (N/P ratio=1.8) and a high areal capacity (6.6 mAh cm⁻²).     

Bulk-Phase Reconstruction Enables Robust Zinc Metal Anodes for Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries are inherently safe, but the severe dendrite growth and corrosion reaction on zinc anodes greatly hinder their practical applications. Most of the strategies for zinc anode modification refer to the research of lithium metal anodes on surface regulation without considering the intrinsic mechanisms of zinc anode. Herein, we first point out that surface modification cannot permanently protect zinc anodes due to the unavoidable surface damage during the stripping process by solid–liquid conversion. A bulk-phase reconstruction strategy is proposed to introduce abundant zincophilic sites both on the surface and inside the commercial zinc foils. The bulk-phase reconstructed zinc foil anodes exhibit uniform surfaces with high zincophilicity even after deep stripping, significantly improving the resistance to dendrite growth and side reactions. Our proposed strategy suggests a promising direction for the development of dendrite-free metal anodes for practical rechargeable batteries with high sustainability.     

Solid-Electrolyte Interphase Chemistries Towards High-Performance Aqueous Zinc Metal Batteries

Aqueous zinc metal batteries (AZMBs) are deemed a promising technology for electrochemical energy storage due to their high safety, low cost, and high energy density. However, AZMBs still suffer from severe side reactions, including Zn dendrite formation and intrinsic hydrogen evolution reaction. In contrast to the solid-electrolyte interphase (SEI) layer that stabilizes Li/Na/K metal anodes in organic electrolytes, it is difficult to form an SEI layer on the Zn surface because of the difficulty in decomposing the salt anions within the narrow electrochemical potential window of water. A team from the University of Adelaide reports a novel pure or hybrid electrolyte with H₂O by using dimethyl methylphosphonate (DMMP) as solvent or co-solvent to construct a uniform and stable phosphate-based SEI layer (ZnP₂O₆ and Zn₃(PO₄)₂). As a result, high Coulombic efficiencies and improved capacity retentions are obtained.     

Dynamic Zn/Electrolyte Interphase and Enhanced Cation Transfer of Sol Electrolyte for All-Climate Aqueous Zinc Metal Batteries

Zn metal as one of the promising anodes of aqueous batteries possesses notable advantages, but it faces severe challenges from severe side reactions and notorious dendrite growth. Here, ultrathin nanosheets of α-zirconium phosphate (ZrP) are explored as an electrolyte additive. The nanosheets not only create a dynamic and reversible interphase on Zn but also promote the Zn²⁺ transportation in the electrolyte, especially in the outer Helmholtz plane near ZrP. Benefited from the enhanced kinetics and dynamic interphase, the pouch cells of Zn||LiMn₂O₄ using this electrolyte remarkably improve electrochemical performance under harsh conditions, i.e. Zn powders as the Zn anode, high mass loading, and wide temperatures. The results expand the materials available for this dynamic interphase, provide an insightful understanding of the enhanced charge transfer in the electrolyte, and realize the combination of dynamic interphase and enhanced kinetics for all-climate performance.     

A Bio-Inspired Trehalose Additive for Reversible Zinc Anodes with Improved Stability and Kinetics

The moderate reversibility of Zn anodes, as a long-standing challenge in aqueous zinc-ion batteries, promotes the exploration of suitable electrolyte additives continuously. It is crucial to establish the absolute predominance of smooth deposition within multiple interfacial reactions for stable zinc anodes, including suppressing side parasitic reactions and facilitating Zn plating process. Trehalose catches our attention due to the reported mechanisms in sustaining biological stabilization. In this work, the inter-disciplinary application of trehalose is reported in the electrolyte modification for the first time. The pivotal roles of trehalose in suppressed hydrogen evolution and accelerated Zn deposition have been investigated based on the principles of thermodynamics as well as reaction kinetics. The electrodeposit changes from random accumulation of flakes to dense bulk with (002)-plane exposure due to the unlocked crystal-face oriented deposition with trehalose addition. As a result, the highly reversible Zn anode is obtained, exhibiting a high average CE of 99.8 % in the Zn/Cu cell and stable cycling over 1500 h under 9.0 % depth of discharge in the Zn symmetric cell. The designing principles and mechanism analysis in this study could serve as a source of inspiration in exploring novel additives for advanced Zn anodes.     

Steric-hindrance Effect Tuned Ion Solvation Enabling High Performance Aqueous Zinc Ion Batteries

Despite many additives have been reported for aqueous zinc ion batteries, steric-hindrance effect of additives and its correlation with Zn²⁺ solvation structure have been rarely reported. Herein, large-sized sucrose biomolecule is selected as a paradigm additive, and steric-hindrance electrolytes (STEs) are developed to investigate the steric-hindrance effect for solvation structure regulation. Sucrose molecules do not participate in Zn²⁺ solvation shell, but significantly homogenize the distribution of solvated Zn²⁺ and enlarge Zn²⁺ solvation shell with weakened Zn²⁺−H₂O interaction due to the steric-hindrance effect. More importantly, STEs afford the water-shielding electric double layer and in situ construct the organic and inorganic hybrid solid electrolyte interface, which effectively boost Zn anode reversibility. Remarkably, Zn//NVO battery presents high capacity of 3.9 mAh ⋅ cm⁻² with long cycling stability for over 650 cycles at lean electrolyte of 4.5 μL ⋅ mg⁻¹ and low N/P ratio of 1.5, and the stable operation at wide temperature (−20 °C~+40 °C).     

A Self-Deoxidizing Electrolyte Additive Enables Highly Stable Aqueous Zinc Batteries

In aqueous zinc (Zn) batteries, the Zn anode suffers from severe corrosion reactions and consequent dendrite growth troubles that cause fast performance decay. Herein, we uncover the corrosion mechanism and confirm that the dissolved oxygen (DO) other than the reputed proton is a principal origin of Zn corrosion and by-product precipitates, especially during the initial battery resting period. In a break from common physical deoxygenation methods, we propose a chemical self-deoxygenation strategy to tackle the DO-induced hazards. As a proof of concept, sodium anthraquinone-2-sulfonate (AQS) is introduced to aqueous electrolytes as a self-deoxidizing additive. As a result, the Zn anode sustains a long-term cycling of 2500 h at 0.5 mA cm⁻² and over 1100 h at 5 mA cm⁻² together with a high Coulombic efficiency up to 99.6 %. The full cells also show a high capacity retention of 92 % after 500 cycles. Our findings provide a renewed understanding of Zn corrosion in aqueous electrolytes and also a practical solution towards industrializing aqueous Zn batteries.     

Realizing Textured Zinc Metal Anodes through Regulating Electrodeposition Current for Aqueous Zinc Batteries

Crystallography modulation of zinc (Zn) metal anode is promising to promote Zn reversibility in aqueous electrolytes, but efficiently constructing Zn with specific crystallographic texture remains challenging. Herein, we report a current-controlled electrodeposition strategy to texture the Zn electrodeposits in conventional aqueous electrolytes. Using the electrolytic cell with low-cost Zn(CH₃COO)₂ electrolyte and Cu substrate as a model system, the texture of as-deposited Zn gradually transforms from (101) to (002) crystal plane as increasing the current density from 20 to 80 mA cm⁻². Moreover, the high current accelerates the Zn nucleation rate with abundant nuclei, enabling uniform deposition. The (002) texture permits stronger resistance to dendrite growth and interfacial side reactions than the (101) texture. The resultant (002)-textured Zn electrode achieves deep cycling stability and supports the stable operation of full batteries with conventional V/Mn-based oxide cathodes.     

Localized Anion-Cation Aggregated Aqueous Electrolytes with Accelerated Kinetics for Low-Temperature Zinc Metal Batteries

Aqueous zinc metal batteries hold great promise for large-scale energy storage because of their high safety, rich material resources and low cost. However, the freeze of aqueous electrolytes hinders low-temperature operation of the batteries. Here, aqueous localized anion-cation aggregated electrolytes composed of Zn(BF₄)₂ as the salt and tetrahydrofuran (THF) as the diluent, are developed to improve the low-temperature performance of the Zn anode. THF promotes the inclusion of BF₄⁻ in the solvation sheath of Zn²⁺, facilitating the formation of ZnF₂-rich solid-electrolyte-interphase. THF also affects the hydrogen bonding between neighboring H₂O molecules, effectively lowering the freezing point. Therefore, the full cells of Zn||polyaniline (PANI) exhibit an ultralong cycle life of 8000 cycles with an average Coulombic efficiency of 99.99 % at −40 °C. Impressively, the pouch cells display a high capacity retention of 86.2 % after 500 cycles at −40 °C, which demonstrates the great prospect of such electrolytes in cold regions. This work provides new insights for the design of low-temperature aqueous electrolytes.     

水系锌离子电池用钒基正极材料的研究进展

水系锌离子电池(aqueous zinc-ion batteries,AZIBs)具有高安全性、低生产成本、锌资源丰富和环境友好等优点,被认为是未来大规模储能系统中极具发展前景的储能装置。目前,AZIBs的研究关键之一在于开发具有稳定结构和高容量的锌离子可脱嵌正极材料。钒基化合物用作AZIBs正极时,表现出可逆容量高和结构丰富可变等特点,受到了广泛的关注和研究。然而,钒基化合物的储锌机理较复杂,不同材料通常表现出各异的电化学性能和储能机理。在本综述中,我们全面地阐述了钒基化合物的储能机制,并探讨了钒基材料在水系锌离子电池中的应用和发展近况,以及它们的性能优化策略。在此基础上,也进一步地展望了水系锌离子电池及其钒基正极材料的发展方向。     

Triple-function Hydrated Eutectic Electrolyte for Enhanced Aqueous Zinc Batteries

Aqueous rechargeable zinc-ion batteries (ARZBs) are impeded by the mutual problems of unstable cathode, electrolyte parasitic reactions, and dendritic growth of zinc (Zn) anode. Herein, a triple-functional strategy by introducing the tetramethylene sulfone (TMS) to form a hydrated eutectic electrolyte is reported to ameliorate these issues. The activity of H₂O is inhibited by reconstructing hydrogen bonds due to the strong interaction between TMS and H₂O. Meanwhile, the preferentially adsorbed TMS on the Zn surface increases the thickness of double electric layer (EDL) structure, which provides a shielding buffer layer to suppress dendrite growth. Interestingly, TMS modulates the primary solvation shell of Zn²⁺ ultimately to achieve a novel solvent co-intercalation ((Zn-TMS)²⁺) mechanism, and the intercalated TMS works as a “pillar” that provides more zincophilic sites and stabilizes the structure of cathode (NH₄V₄O₁₀, (NVO)). Consequently, the Zn||NVO battery exhibits a remarkably high specific capacity of 515.6 mAh g⁻¹ at a low current density of 0.2 A g⁻¹ for over 40 days. This multi-functional electrolytes and solvent co-intercalation mechanism will significantly propel the practical development of aqueous batteries.     

水系锌离子电池钒基氧化物正极材料研究进展

近年来,钒基氧化物因为种类众多、理论比容量高和倍率性能优异等优点,被认为是一类具有潜在应用价值的水系锌离子电池正极材料。本文综述了V2O5、VO2等钒基氧化物材料的结构特点及其作为水系锌离子电池正极材料的最近研究进展。重点概述了当前钒基氧化物在锌离子电池中所面临的关键问题以及应对策略;最后,对钒基氧化物储锌材料的发展方向进行了展望。     

A Covalent Organic Framework as a Long-life and High-Rate Anode Suitable for Both Aqueous Acidic and Alkaline Batteries

Aqueous rechargeable batteries are prospective candidates for large-scale grid energy storage. However, traditional anode materials applied lack acid-alkali co-tolerance. Herein, we report a covalent organic framework containing pyrazine (C=N) and phenylimino (−NH−) groups (HPP-COF) as a long-cycle and high-rate anode for both acidic and alkaline batteries. The HPP-COF′s robust covalent linkage and the hydrogen bond network between −NH− and water molecules collectively improve the acid-alkaline co-tolerance. More importantly, the hydrogen bond network promotes the rapid transport of H⁺/OH⁻ by the Grotthuss mechanism. As a result, the HPP-COF delivers a superior capacity and cycle stability (66.6 mAh g⁻¹@ 30 A g⁻¹, over 40000 cycles in 1 M H₂SO₄ electrolyte; 91.7 mAh g⁻¹@ 100 A g⁻¹, over 30000 cycles @ 30 A g⁻¹ in 1 M NaOH electrolyte). The work opens a new direction for the structural design and application of COF materials in acidic and alkaline batteries.     

Fast Polysulfide Conversion Catalysis and Reversible Anode Operation by A Single Cathode Modifier in Li-Metal Anode-Free Lithium-Sulfur Batteries

The two major issues confronting the commercialization of rechargeable lithium-sulfur (Li−S) batteries are the sluggish kinetics of the sulfur electrochemical reactions on the cathode and inadequate lithium deposition/stripping reversibility on the anode. They are commonly mitigated with additives designed specifically for the anode and the cathode individually. Here, we report the use of a single cathode modifier, In₂Se₃, which can effectively catalyse the polysulfide reactions on the cathode, and also improve the reversibility of Li deposition and removal on the anode through a LiInS₂/LiInSe₂ containing solid electrolyte interface formed in situ by the Se and In ions dissolved in the electrolyte. The amounts of dissolved Se and In are small relative to the amount of In₂Se₃ administered. The benefits of using this single modification approach were verified in Li-metal anode-free Li−S batteries with a Li₂S loading of 4 mg cm⁻² and a low electrolyte/Li₂S ratio of 7.5 μL mg⁻¹. The resulting battery showed 60 % capacity retention after 160 cycles at the 0.2 C rate and an average Coulombic efficiency of 98.27 %, comparing very well with recent studies using separate electrode modifiers.     

Suppressing Universal Cathode Crossover in High-Energy Lithium Metal Batteries via a Versatile Interlayer Design**

The universal cathode crossover such as chemical and oxygen has been significantly overlooked in lithium metal batteries using high-energy cathodes which leads to severe capacity degradation and raises serious safety concerns. Herein, a versatile and thin (≈25 μm) interlayer composed of multifunctional active sites was developed to simultaneously regulate the Li deposition process and suppress the cathode crossover. The as-induced dual-gradient solid-electrolyte interphase combined with abundant lithiophilic sites enable stable Li stripping/plating process even under high current density of 10 mA cm⁻². Moreover, X-ray photoelectron spectroscopy and synchrotron X-ray experiments revealed that N-rich framework and CoZn dual active sites can effectively mitigate the undesired cathode crossover, hence significantly minimizing Li corrosion. Therefore, assembled lithium metal cells using various high-energy cathode materials including LiNi_0.7Mn_0.2Co_0.1O₂, Li_1.2Co_0.1Mn_0.55Ni_0.15O₂, and sulfur demonstrate significantly improved cycling stability with high cathode loading.     

水系锌离子电池锰基正极材料

水系锌离子电池(AZIBs)以低成本、高安全性和高环保特性在大规模储能领域具有广阔的应用前景,当前备受关注的正极材料是研究的热点.锰基化合物因具有资源丰富、环境友好和价格低廉等优点,是最具市场应用前景的一类正极材料.本文详细综述了不同锰基化合物的结构特点以及锰基AZIBs在充放电过程中涉及的四种储能机理,讨论了AZIB...     

电解液对水系可充电池MnO2正极电化学性能的影响

研究了水系电解液中Li⁺、Zn²⁺和Mn²⁺阳离子对具有不同晶型结构和形貌的MnO₂正极电化学性能的影响,探讨其储能机理。结果表明,在不含Mn(II)离子的水溶液中,MnO₂电极所表现的电化学性能趋同,容量低,衰减快。含有Zn²⁺离子的水溶液中,MnO₂电极因二价锌离子的嵌入-脱出,容量明显提升,但衰减严重。当溶液中同时含有Zn²⁺、Mn²⁺离子时,基于Mn²⁺和Zn²⁺离子之间的协同作用和Mn²⁺离子氧化/还原反应过程的作用,有效抑制MnO₂颗粒的聚集和结构塌陷,削弱碱式硫酸锌杂质不利的影响,保持了锌离子在MnO₂电极中嵌入-脱出的高容量特性(200 mAh·g^-1,电流密度：100 mA·g^-1),及良好的循环稳定性。