In situ friction study of Ag Underpotential deposition (UPD) on Au(111) in aqueous electrolyte

The electrodeposition of silver on Au(111) was investigated using lateral force microscopy (LFM) in Ag⁺ containing sulfuric acid. Friction force images show that adsorbed sulfate forms structure ( on Au(111) prior to Ag underpotential deposition (UPD) and structure ( ) on a complete monolayer or bilayer of Ag. Variation of friction with normal load shows a non-monotonous dependence, which is caused by increasing penetration of the tip into the sulfate adlayer. In addition, the friction force is influenced by the varying coverage and mobility of Ag atoms on the surface. Before Ag coverage reaches the critical value, the deposited silver atoms may be mobile enough to be dragged by the movement of AFM tip. Possible penetration of the tip into the UPD layer at very high loads is discussed as a model for self-healing wear. However, when the coverage of Ag is close to 1, the deposited Ag atoms are tight enough to resist the influence of the AFM tip and the tip penetrates only into the sulfate adlayer.     

Atomic-Scale Studies of Fe3O4(001) and TiO2(110) Surfaces Following Immersion in CO2-Acidified Water

Difficulties associated with the integration of liquids into a UHV environment make surface-science style studies of mineral dissolution particularly challenging. Recently, we developed a novel experimental setup for the UHV-compatible dosing of ultrapure liquid water and studied its interaction with TiO₂ and Fe₃O₄ surfaces. Herein, we describe a simple approach to vary the pH through the partial pressure of CO₂ ( ) in the surrounding vacuum chamber and use this to study how these surfaces react to an acidic solution. The TiO₂(110) surface is unaffected by the acidic solution, except for a small amount of carbonaceous contamination. The Fe₃O₄(001)-( × )R45° surface begins to dissolve at a pH 4.0–3.9 ( =0.8–1 bar) and, although it is significantly roughened, the atomic-scale structure of the Fe₃O₄(001) surface layer remains visible in scanning tunneling microscopy (STM) images. X-ray photoelectron spectroscopy (XPS) reveals that the surface is chemically reduced and contains a significant accumulation of bicarbonate (HCO₃⁻) species. These observations are consistent with Fe(II) being extracted by bicarbonate ions, leading to dissolved iron bicarbonate complexes (Fe(HCO₃)₂), which precipitate onto the surface when the water evaporates.     

Double-Exchange Magnetic Interactions in High-Temperature Ferromagnetic Iron Chalcogenide Monolayers

Smythite ( ) is an iron-based chalcogenide with a lamellar structure, different from the compositionally identical mineral greigite. Owing to their natural abundance, such transition metal chalcogenides are promising materials for low-cost spintronic-based devices. Herein, we discuss the charge transfer processes and complex magnetic ordering in a two-dimensional (2D) smythite lattice. We find that redox couple and complex magnetic ordering are governing factors in the charge transfer processes. A very strong ferromagnetic in-lattice coupling is also observed, which is attributed to the presence of three Fe-centres. To describe the magnetic behaviour molecular and periodic approaches have been considered. We found a substantial increase in Curie temperature with applied mechanical stress due to opening of the double exchange interaction angle. We also observe an in-plane Jahn−Teller distortion, which is further confirmed by the spin−orbit counter plot. Our study thus provides an insight into the double exchange mechanism favoured by the redox couple and results in a strong ferromagnetic ordering.     

Indirect Nuclear Spin-Spin Exchange Coupling through Solvated Electron in Small Sizes of Cyclic and Cage-Shaped Perfluoroalkanes

Small perfluorocycloalkanes (hexafluorocyclopropane (c-C₃F₆), octafluorocyclobutane (c-C₄F₈) and decafluorocyclopentane (c-C₅F₁₀) and cage-shaped perfluoroalkanes (perfluoro tetrahedral alkane (C₄F₄), perfluoro prismane (C₆F₆) and perfluoro cubane (C₈F₈)) are better electron scavengers. The captured excess electrons are weakly bound inside their backbone voids or over their backbones, forming the solvated electron ( ) systems (e@c-C_nF_2ns (n=3, 4, 5) and e@C_nF_n (n=4, 6, 8)). There have been many studies on the structures and properties of such systems. However, the effect of on the indirect nuclear spin-spin coupling (J-coupling) is unknown. In this work, we explore how affects ^NeJ-coupling between two coupled F nuclei (^NeJ_FF-coupling) in perfluoroalkane systems through density functional theory calculations. We find unusual trans-^NeJ_FF-couplings (two coupled F nuclei in trans-position) in e@c-C_nF_2n (n=3, 4, 5) and ^NeJ_FF-couplings in e@C_nF_n (n=4, 6, 8). One excess electron not only changes the molecular structures, but also enforces unique distributions and properties, depending on the structural characteristics. We also confirm that such unusual ^NeJ_FF-couplings are realized by through- (T-SE) transmission mechanism, rather than the conventional through-bonds (T−B)/through-space (T−S) ones. The novel transmission mechanism consists of the T-SE coupling path (path 1) and -enhanced T−B T−S coupling path (path 2), and the two paths jointly control ^NeJ_FF through cooperation and competition. Interestingly, the former plays a dominant role for long-range ^NeJ_FF-coupling (N=5), while the latter plays a role in the short-range ^NeJ_FF-coupling (N=3, 4). Path bending angle mainly influences path 1, while path 2 is mainly influenced by the path length. This work not only provides novel insights into the mediating role of in the coupling information exchange, but also proposes a new -based coupling mechanism, possibly opening up potential applications for the -based indirect nuclear spin couplings.     

The Reaction of Sulfur Dioxide Radical Cation with Hydrogen and its Relevance in Solar Geoengineering Models

SO₂ has been proposed in solar geoengineering as a precursor of H₂SO₄ aerosol, a cooling agent active in the stratosphere to contrast climate change. Atmospheric ionization sources can ionize SO₂ into excited states of , which quickly reacts with trace gases in the stratosphere. In this work we explore the reaction of with excited by tunable synchrotron radiation, leading to ( ), where H contributes to O₃ depletion and OH formation. Density Functional Theory and Variational Transition State Theory have been used to investigate the dynamics of the title barrierless and exothermic reaction. The present results suggest that solar geoengineering models should test the reactivity of with major trace gases in the stratosphere, such as H₂ since this is a relevant channel for the OH formation during the nighttime when there is not OH production by sunlight. OH oxides SO₂, triggering the chemical reactions leading to H₂SO₄ aerosol.     

Cover Feature: How Different are the Diamagnetic and Paramagnetic Contributions to Off-Nucleus Shielding in Aromatic and Antiaromatic Rings? (ChemPhysChem 9/2023)

The spatial variations in the diamagnetic and paramagnetic contributions to the off-nucleus isotropic shielding, , and to the zz component of the off-nucleus shielding tensor, , around benzene (C₆H₆) and cyclobutadiene (C₄H₄) are investigated using complete-active-space self-consistent field wavefunctions. Despite the substantial differences between and around the aromatic C₆H₆ and the antiaromatic C₄H₄, the diamagnetic and paramagnetic contributions to these quantities, and , and and , are found to behave similarly in the two molecules, shielding and deshielding, respectively, each ring and its surroundings. The different signs of the most popular aromaticity criterion, the nucleus-independent chemical shift (NICS), in C₆H₆ and C₄H₄ are shown to follow from a change in the balance between the respective diamagnetic and paramagnetic contributions. Thus, the different NICS values for antiaromatic and antiaromatic molecules cannot be attributed to differences in the ease of access to excited states only; differences in the electron density, which determines the overall bonding picture, also play an important role.     

Combined Modelling of Triply Paired Electronic States of HO2+ ion with 3 Symmetry using Coupled Eigen Model

The multi state triply paired coupled adiabatic electronic states of , symmetries for the title ion have been modelled using the triply paired coupled eigen valued functions with the principal aim of getting a set of well optimized triply paired coupled functions, capable of explaining all the microscopic topograhical features present in the chosen coupled electronic states. The high quality size truncated dynamically correlated points at the limit of complete basis set (CBS) were utilized for this purpose. The proposed model function are presented in an “easy to understand” linear form with respect to the pre-defined variables which are directly dependent on the diabatic potentials and coupling strengths found in the diabatic matrix. Its most important feature (an essential criterion to be selected for modelling the triply degenerate seam pathway) is the ability to predict the existence of an uniquely defined triply degenerate iso-energetic geometry among the chosen coupled states in addition to the prediction of the existence of many doubly degenerate iso-energetic geometries in those states and hence can be adaptable to any general molecular system where such triply or doubly degenerate geometries are believed to occur. The title ion is one among them where many doubly iso-energetic geometries were located but not the triply degenerate one as it is a three atomic system unlike the polyatomic case where the triply degenerate geometry will most likely to be found. To do this work, one requires the knowledge of four asymptotic diatomic curves upon atom+diatom dissociation whose correct correlated spectroscopic states are O₂⁺ , O₂ , O₂⁺ , OH⁺ . The quality and the characteristics of analytical surface of the ion is discussed well in detail.     

The Threshold Photoelectron Spectrum of Fulvenone: A Reactive Ketene Derivative in Lignin Valorization

Unveiling reaction mechanisms by isomer-selective detection of reactive intermediates requires advanced spectroscopic knowledge. We study the photoionization of fulvenone (c-C₅H₄=C=O), a reactive ketene species relevant in catalytic pyrolysis of lignin, which was generated by pyrolysis of 2-methoxy acetophenone. The high-resolution threshold photoelectron spectrum (TPES) with vacuum ultraviolet synchrotron radiation revealed well-resolved vibrational transitions, assigned to ring deformation modes of the cyclopentadiene moiety. The adiabatic ionization energy was determined to be 8.25±0.01 eV and is assigned to the ²A₂← ¹A₁ transition. A broad and featureless band arising at 9 eV is associated with the ²B₁← ¹A₁ excitation. A conical intersection is responsible for the ultrafast relaxation of the fulvenone cation from the into the state resulting in a featureless and lifetime broadened band. These insights will increase the detection capabilities for fulvenone and thereby help to elucidate reaction mechanisms in lignin catalytic pyrolysis.     

On the Mechanical Properties of Popgraphene-Based Nanotubes: a Reactive Molecular Dynamics Study

Carbon-based tubular materials have sparked a great interest in future electronics and optoelectronics device applications. In this work, we computationally studied the mechanical properties of nanotubes generated from popgraphene (PopNTs). Popgraphene is a 2D carbon allotrope composed of 5-8-5 rings. We carried out fully atomistic reactive (ReaxFF) molecular dynamics for PopNTs of different chiralities ( and ) and/or diameters and at different temperatures (from 300 up to 1200 K). Results showed that the tubes are thermally stable (at least up to 1200 K). All tubes presented stress/strain curves with a quasi-linear behavior followed by an abrupt drop of stress values. Interestingly, armchair-like PopNTs ( ) can stand a higher strain load before fracturing when contrasted to the zigzag-like ones ( ). Moreover, it was obtained that Young's modulus (Y_Mod) (750–900 GPa) and ultimate strength (σ_US) (120–150 GPa) values are similar to the ones reported for conventional armchair and zigzag carbon nanotubes. Y_Mod values obtained for PopNTs are not significantly temperature-dependent. While the σ_US values for the showed a quasi-linear dependence with the temperature, the exhibited no clear trends.     

Vibrationally Resolved Inner-Shell Photoexcitation of the Molecular Anion C2−

Carbon 1s core-hole excitation of the molecular anion C₂⁻ has been experimentally studied at high resolution by employing the photon-ion merged-beams technique at a synchrotron light source. The experimental cross section for photo–double-detachment shows a pronounced vibrational structure associated with and core excitations of the C₂⁻ ground level and first excited level, respectively. A detailed Franck-Condon analysis reveals a strong contraction of the C₂⁻ molecular anion by 0.2 Å upon this core photoexcitation. The associated change of the molecule's moment of inertia leads to a noticeable rotational broadening of the observed vibrational spectral features. This broadening is accounted for in the present analysis which provides the spectroscopic parameters of the C₂⁻ and core-excited levels.     

Quantum Phase Diagram of a Frustrated Spin-1/2 Ferro-Antiferromagnetic Normal Ladder

In this work, we consider a frustrated two-leg spin-1/2 ladder composed of Heisenberg ferromagnetic and antiferromagnetic spin-1/2 chains, and nearest spins from different legs interact via Heisenberg type rung exchange interactions that can be either ferromagnetic or antiferromagnetic in nature. The competing exchange interactions in the system lead to five different quantum phases like ferromagnetic, non-collinear ferrimagnetic (NCF), , antiferromagnetic and dimer phases. The  quantum phase diagram is constructed for the Heisenberg spin-1/2 model and the phases are characterized using the correlation functions which are calculated by the density matrix renormalization group method. We also analyze the  stability of phase and calculate the pitch angle in the NCF phase.     

Reversible Metal-Hydride Transformation in Mg-Ti-H Nanoparticles at Remarkably Low Temperatures

We study the kinetics of hydrogen sorption in Mg-Ti-H nanoparticles prepared by gas phase condensation of mixed Mg-Ti vapors under a H₂-containing atmosphere. Four samples with different Ti contents from 14 to 63 at.% Ti are examined in the 100–150 °C range. The hydrogen absorption kinetics coupled with the formation of MgH₂ can be described by a nucleation and growth model. The activation energy is in the range kJ/mol and the rate constant (at 150 °C) increases from s⁻¹ to s⁻¹ with increasing Ti content. Hydrogen desorption is well modeled by a sequence of surface-limited and contracting-volume kinetics, except at the highest Ti content where nucleation and growth is observed. The activation energy of surface-limited kinetics is /mol. The rate constant (at 150 °C) increases from s⁻¹ to s⁻¹ with the Ti content. These results open an unexplored kinetic window for Mg-based reversible hydrogen storage close to ambient temperature.     

Singlet-Triplet Excited-State Inversion in Heptazine and Related Molecules: Assessment of TD-DFT and ab initio Methods

We have investigated the origin of the S₁-T₁ energy levels inversion for heptazine, and other N-doped π-conjugated hydrocarbons, leading thus to an unusually negative singlet-triplet energy gap ( ). Since this inversion might rely on substantial doubly-excited configurations to the S₁ and/or T₁ wavefunctions, we have systematically applied multi-configurational SA-CASSCF and SC-NEVPT2 methods, SCS-corrected CC2 and ADC(2) approaches, and linear-response TD-DFT, to analyze if the latter method could also face this challenging issue. We have also extended the study to B-doped π-conjugated systems, to see the effect of chemical composition on the results. For all the systems studied, an intricate interplay between the singlet-triplet exchange interaction, the influence of doubly-excited configurations, and the impact of dynamic correlation effects, serves to explain the values found for most of the compounds, which is not predicted by TD-DFT.     

Hydroxylamine Oxidation on Polycrystalline Gold Electrodes in Aqueous Electrolytes: Quantitative On-Line Mass Spectrometry under Forced Convection

Herein, a method is presented that allows quantitative determination of faradaic efficiencies for dinitrogen (N₂) generation during the electrochemical oxidation of hydroxylamine (NH₂OH), , on a polycrystalline gold Au(poly) disk electrode in aqueous electrolytes over a wide pH range. This tactic involves the use of an impinging jet electrolyte configuration incorporating a gas porous ring connected in turn to a mass spectrometer. The actual amount of N₂ generated at the Au(poly) disk was assayed using the oxidation of hydrazine (N₂H₄) in aqueous phosphate buffer (pH 7). This redox process yields N₂ as the only product, allowing a direct correlation to be established between the changes in the partial pressures of N₂ and the current flowing through the disk electrode. An analysis of the data collected revealed a strong dependence of both on pH and the applied potential. Although values of as high as 20 to 30 % were found in acid and neutral media over a narrow potential region, those in alkaline solution were far smaller in the entire potential range examined.     

Resonant Fragmentation of the Water Cation by Electron Impact: a Wave-Packet Study

We have investigated the dissociation of a resonant state that can be formed in low energy electron scattering from H₂O⁺. We have chosen the second triplet resonance above the state of H₂O⁺ whose autoionization mainly produces H₂O⁺ ( ). We have considered both dissociation of the resonant state itself, dissociative recombination (DR), or the dissociation of the H₂O⁺ cation after autodetachment, dissociative excitation (DE). The time-evolution of a wave packet on the potential energy surfaces of the resonance and cationic states shows, for the initial conditions studied, that the probability for DR is about 38 % while the probability for DE is negligible.     

Reducing Properties of Superalkalis on Pyridinic Graphene Surfaces: a Computational Study

The hyperlithiated species (k=1, 2, 3, and 4) have been studied by quantum mechanical (QM) methods. Different structures have been localized for each molecule by the CBS-QB3 composite method: all the isomers show superalkali properties and strong tendency to donate an electron to carbon dioxide forming stable complexes. With the aim to find molecular systems able to stabilize superalkalis, geometries of complexes between superalkalis and pyridine and superalkalis and graphene surfaces doped with a pyridinic vacancy were calculated. The pyridinic graphene sheets were modeled with two finite molecular systems C₆₉H₂₁N₃ and C₁₁₇H₂₇N₃. The interaction with one pyridine molecule is quite weak and the superalkali maintains its structure and electron properties. The affinity for graphene sheets is instead stronger and the superalkalis tend to deform their geometry to better interact with the graphene surface. However, the superalkalis continue to show the tendency to transfer electrons to carbon dioxide reducing CO₂, as found in graphene absence.     

A Multiconformational Transition State Theory Approach to OH Tropospheric Degradation of Fluorotelomer Aldehydes

Experimental work on the OH-initiated oxidation reactions of fluorotelomer aldehydes (FTALs) strongly suggests that the respective rate coefficients do not depend on the size of the C_xF_2x+1 fluoroalkyl chain. FTALs hence represent a challenging test to our multiconformer transition state theory (MC-TST) protocol based on constrained transition state randomization (CTSR), since the calculated rate coefficients should not show significant variations with increasing values of . In this work we apply the MC-TST/CTSR protocol to the cases and calculate both rate coefficients at 298.15 K with a value of cm³ molecule⁻¹ s⁻¹, practically coincident with the recommended experimental value of k_exp= cm³ molecule⁻¹ s⁻¹. We also show that the use of tunneling corrections based on improved semiclassical TST is critical in obtaining Arrhenius-Kooij curves with a correct behavior at lower temperatures.     

Adsorption of Acetate on Au(111): An in-situ Scanning Tunnelling Microscopy Study and Implications on Formic Acid Electrooxidation

The adsorption of acetate on an Au(111) electrode surface in contact with acetic acid at pH 2.7 was imaged in-situ using scanning tunnelling microscopy (STM). Two different ordered structures were imaged for acetate adsorbed in the bidentate configuration on the unreconstructed surface at 0.95 V (vs. the saturated calomel electrode, SCE). The first structure, , is metastable and transforms at constant potential within 20 minutes to a structure, which is thermodynamically more favourable. The acetate adlayer starts to form at step edges and propagates via nucleation and growth onto terraces. The findings from in-situ STM are in agreement with the electrochemical behaviour of acetate on Au(111) characterized by voltammetry. A comparison is made with formate adsorption on Au(111). While acetate is not reactive, in contrast to formate, it can act as a spectator species in formic acid electrooxidation.     

The Reaction of Muonium with Hydrogen Peroxide in Aqueous Solution

Rate constants for the reactions of muonium (Mu) (the ultralight isotope of the hydrogen atom) with H₂O₂ in H₂O and D₂O₂ in D₂O have been determined at various temperatures and pH (pD) values. The data are consistent with the three reactions: , , and the equivalent for the deuterated entities. A significant positive H/D isotope effect was found for the undissociated peroxide, while for the anions the effect was negligible or slightly in the opposite direction. In addition, for concentrated solutions of peroxide a study of the muon spin polarization as a function of applied transverse magnetic field yielded results consistent with the rate constants determined from the direct decay measurements, and indicated that the reaction products are diamagnetic, most likely MuH and MuOH, i. e., no muoniated radical products are formed. These results are potentially relevant for management of the radiolysis products in nuclear industry.     

Proton Relaxometry of Long-Lived Spin Order

A study of long-lived spin order in chlorothiophene carboxylates at both high and low magnetic fields is presented. Careful sample preparation (removal of dissolved oxygen in solution, chelating of paramagnetic impurities, reduction of convection) allows one to obtain very long-lived singlet order of the two coupled protons in chlorothiophene derivatives, having lifetimes of about 130 s in D₂O and 240 s in deuterated methanol, which are much longer than the T₁-relaxation times (18 and 30 s, respectively, at a field =9.4 T). In protonated solvents the relaxation times become shorter, but the lifetime is still substantially longer than . In addition, long-lived coherences are shown to have lifetimes as long as 30 s. Thiophene derivatives can be used as molecular tags to study slow transport, slow dynamics and slow chemical processes, as has been shown in recent years.